Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 45905.4-2025 |
Electricity spot market operations - Part 4: Load forecasting {译} 电力现货市场运营-第4部分：负荷预测 |
China National Standards Load |
 English PDF |
| GB/T 35205.4-2025 |
Rough terrain forklifts - Safety requirements and verification - Part 4: Additional requirements for telescopic forklifts carrying freely swinging Loads {译} 越野叉车-安全要求及验证-第4部分：吊运可自由摆动载荷的伸缩臂式叉车的附加要求 |
China National Standards Load |
English PDF |
| GB/T 2423.66-2025 |
Environmental Testing - Part 2: Test Methods - Test: Temperature/Humidity/Static Load Combination {译} 环境试验-第2部分：试验方法-试验：温度/湿度/静负载综合 |
China National Standards Load |
English PDF |
| GB/T 15233-2025 |
Packaging - Unit Load Dimensions {译} 包装-单元货物尺寸 |
China National Standards Load |
English PDF |
| GB/T 19315-2025 |
Small Boats - Maximum Loading Capacity {译} 小艇-最大装载量 |
China National Standards Load |
English PDF |
| GB/T 29509.1-2025 |
Load Chemical Analysis Methods for Gold and Carbon - Part 1: Determination of Gold and Silver Contents {译} 载金炭化学分析方法-第1部分：金量和银量的测定 |
China National Standards Load |
English PDF |
| GB/T 45745-2025 |
Loading Specifications for Road Freight Transport Vehicles {译} 道路货物运输车辆装载规范 |
China National Standards Load |
English PDF |
| GB/T 45665.2-2025 |
Anesthetic and respiratory equipment - Conical joints - Part 2: Threaded Load-bearing joints {译} 麻醉和呼吸设备-圆锥接头-第2部分：螺纹承重接头 |
China National Standards Load |
English PDF |
| GB/T 45680-2025 |
Crane - Wind Load calculation {译} 起重机-风载荷计算 |
China National Standards Load |
English PDF |
| GB/T 25653-2025 |
Bucket Loader {译} 铲斗装岩机 |
China National Standards Load |
English PDF |
| GB/T 7679.2-2025 |
Mining Machinery Terminology - Part 2: Loading Equipment {译} 矿山机械术语-第2部分：装载设备 |
China National Standards Load |
English PDF |
| GB/T 45644-2025 |
Test Method for Resistance of Thermoplastic Manholes to Ground and Traffic Loads {译} 热塑性塑料检查井抗地面和交通负荷性能试验方法 |
China National Standards Load |
English PDF |
| GB/T 45594-2025 |
Test Methods for the Performance of Non-Load-Bearing Ultra-High Performance Concrete Components {译} 超高性能混凝土非承重构件性能试验方法 |
China National Standards Load |
English PDF |
| GB/T 45366-2025 |
Geosynthetics - Determination of Vertical Permeability under Load {译} 土工合成材料-负荷作用下垂直渗透性能的测定 |
China National Standards Load |
English PDF |
| GB/T 1634.1-2025 |
Plastics - Determination of deflection temperature under Load - Part 1: General test method {译} 塑料-负荷变形温度的测定-第1部分：通用试验方法 |
China National Standards Load |
English PDF |
| GB 17918-2025 |
Safety Specifications for Dust Explosion Prevention in Bulk Grain Handling and UnLoading Systems at Ports {译} 港口散粮装卸系统粉尘防爆安全规范 |
China National Standards Load |
English PDF |
| GB/T 45052-2024 |
Earth-moving machinery - pure electric tire Loaders - test methods {译} 土方机械-纯电动轮胎式装载机-试验方法 |
China National Standards Load |
English PDF |
| GB/T 44930-2024 |
Requirements for the interface between high-altitude scientific balloon platforms and payLoads {译} 高空科学气球平台与有效载荷接口要求 |
China National Standards Load |
English PDF |
| GB/T 45047-2024 |
Earth-moving machinery-pure electric tire Loader-technical requirements {译} 土方机械-纯电动轮胎式装载机-技术要求 |
China National Standards Load |
English PDF |
| GB/T 45094-2024 |
Earth-moving machinery-Hybrid tire Loaders- {译} 土方机械-混合动力轮胎式装载机- |
China National Standards Load |
English PDF |
| GB/T 1094.7-2024 |
Power transformers - Part 7: Load guidelines for oil-immersed power transformers {译} 电力变压器--第7部分：油浸式电力变压器负载导则 |
China National Standards Load |
English PDF |
| GB/T 44846-2024 |
Calculation of the Load-bearing capacity of plastic gears {译} 塑料齿轮承载能力计算 |
China National Standards Load |
English PDF |
| GB/T 2982-2024 |
Specifications, dimensions, pressure and Load of pneumatic tires for industrial vehicles {译} 工业车辆充气轮胎规格、尺寸、气压与负荷 |
China National Standards Load |
English PDF |
| GB/T 30661.12-2024 |
Wheelchair seats - Part 12: Testing seat cushion wrapping and sinking characteristics using a double hemisphere Load {译} 轮椅车座椅-第12部分：使用双半球加载体测试座垫包覆和陷入特性 |
China National Standards Load |
English PDF |
| GB/T 2978-2024 |
Specifications, dimensions, pressures and Loads of passenger car tires {译} 轿车轮胎规格、尺寸、气压与负荷 |
China National Standards Load |
English PDF |
| GB/T 2977-2024 |
Specifications, dimensions, pressures and Loads of truck tires {译} 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards Load |
English PDF |
| GB/T 44533.3-2024 |
Dies - Ball lock punch fixing plate - Part 3: Type E - Heavy Load simple type {译} 冲模-球锁紧凸模固定板-第3部分：E型-重载简易型 |
China National Standards Load |
English PDF |
| GB/T 44533.2-2024 |
Dies - Ball lock punch fixing plate - Part 2: Type C and D - Light Load simple type {译} 冲模-球锁紧凸模固定板-第2部分：C型和D型-轻载简易型 |
China National Standards Load |
English PDF |
| GB/T 44533.1-2024 |
Punch-Ball locking punch fixing plate-Part 1: Type A and Type B-Light Load long Square and square {译} 冲模-球锁紧凸模固定板-第1部分：A型和B型-轻载长方形和正方形 |
China National Standards Load |
English PDF |
| GB/T 44561-2024 |
Petroleum and natural gas industry-Design and testing of liquefied natural gas Loading and unloading arms for conventional onshore receiving stations {译} 石油天然气工业-常规陆上接收站液化天然气装卸臂的设计与测试 |
China National Standards Load |
English PDF |
| GB/Z 37551.3-2024 |
Marine Energy - Wave energy, tidal energy and other water flow energy conversion devices - Part 3: Mechanical Load measurement {译} 海洋能-波浪能、潮流能及其他水流能转换装置-第3部分：机械载荷测量 |
China National Standards Load |
English PDF |
| GB/T 2424.7-2024 |
Environmental testing - Part 3: Supporting documents and guidelines - Temperature chamber measurements (with Load) for test A (low temperature) and B (high temperature) {译} 环境试验-第3部分：支持文件及导则-试验A（低温）和B（高温）的温度箱测量（带负载） |
China National Standards Load |
English PDF |
| GB/T 44388-2024 |
Space environment - Laboratory calibration method for thermal plasma in-situ detection payLoads {译} 空间环境-热等离子体原位探测载荷实验室定标方法 |
China National Standards Load |
English PDF |
| GB/T 23420-2024 |
Aircraft lower cargo hold container cargo Loader {译} 飞机下货舱集装货物装载机 |
China National Standards Load |
English PDF |
| GB/T 23423-2024 |
Aircraft main cabin container cargo Loader {译} 飞机主舱集装货物装载机 |
China National Standards Load |
English PDF |
| GB/T 44375-2024 |
Requirements for Loading ports of 300mm semiconductor devices {译} 300mm半导体设备装载端口要求 |
China National Standards Load |
English PDF |
| GB/T 44258-2024 |
Earth-moving machinery - Pure electric tire Loaders for plateau tunnels {译} 土方机械-高原隧道用纯电动轮胎式装载机 |
China National Standards Load |
English PDF |
| GB/T 44256-2024 |
Earth-moving machinery - Energy consumption of pure electric tire Loaders - Test methods {译} 土方机械-纯电动轮胎式装载机能量消耗量-试验方法 |
China National Standards Load |
English PDF |
| GB/T 31461-2024 |
Technical guidelines for rapid Load reduction control of thermal power generating units {译} 火力发电机组快速减负荷控制技术导则 |
China National Standards Load |
English PDF |
| GB/Z 44070-2024 |
Hydraulic cylinders - Buckling Load assessment methods {译} 液压缸-屈曲载荷评估方法 |
China National Standards Load |
English PDF |
| GB/T 44124-2024 |
Road vehicles-Road Load =Determination of load {译} 道路车辆-道路负载测定 |
China National Standards Load |
English PDF |
| GB/Z 3480.22-2024 |
Calculation of Load capacity of spur and helical gears - Part 22: Calculation of load capacity of micropitting {译} 直齿轮和斜齿轮承载能力计算-第22部分：微点蚀承载能力计算 |
China National Standards Load |
English PDF |
| GB/Z 3480.4-2024 |
Calculation of Load capacity of spur and helical gears - Part 4: Calculation of load capacity of tooth surface fracture {译} 直齿轮和斜齿轮承载能力计算-第4部分：齿面断裂承载能力计算 |
China National Standards Load |
English PDF |
| GB/Z 43973-2024 |
Sensing devices for non-intrusive Load monitoring (NILM) systems {译} 非介入式负荷监测（NILM）系统用感知装置 |
China National Standards Load |
English PDF |
| GB/T 15148-2024 |
Technical specifications for power Load management systems {译} 电力负荷管理系统技术规范 |
China National Standards Load |
English PDF |
| GB/T 43964-2024 |
Home Technical requirements for over-the-air downLoad (OTA) of electric automatic controllers for use with and similar purposes {译} 家用和类似用途电自动控制器空中下载（OTA）技术要求 |
China National Standards Load |
English PDF |
| GB/T 19936.2-2024 |
Gears - FZG test procedure - Part 2: Relative bonding Load capacity of high extreme pressure oils FZG step loading test A10/16.6R/120 {译} 齿轮-FZG试验程序-第2部分：高极压油的相对胶合承载能力FZG阶梯加载试验A10/16.6R/120 |
China National Standards Load |
English PDF |
| GB/T 43782-2024 |
PreLoaded high-strength bolted structural connection pairs-Part 11: Load indicating washers {译} 人工智能-机器学习系统技术要求 |
China National Standards Load |
English PDF |
| GB/T 22437.2-2023 |
Cranes - Design principles for Loads and load combinations - Part 2: Mobile cranes {译} 起重机 载荷与载荷组合的设计原则 第2部分：流动式起重机 |
China National Standards Load |
English PDF |
| GB/T 43369-2023 |
Interface requirements for optoelectronic mission Load equipment for large and medium-sized civilian UAVs {译} 民用大中型无人机光电任务载荷设备接口要求 |
China National Standards Load |
English PDF |
| GB/T 43324-2023 |
Foil Bearings Gas Dynamic Pressure Thrust Bearing Performance Static Load Capacity, Friction Torque, Friction Factor and Life Test {译} 箔片轴承 气体动压止推轴承性能 静态承载能力、摩擦力矩、摩擦因数和寿命测试 |
China National Standards Load |
English PDF |
| GB/T 25851.2-2023 |
Mobile cranes - Test determination of crane performance - Part 2: Structural capacity under static Loads {译} 流动式起重机 起重机性能的试验测定 第2部分：静载荷作用下的结构能力 |
China National Standards Load |
English PDF |
| GB/T 43404-2023 |
Light vehicle road Load chassis dynamometer reproduced {译} 轻型汽车道路负载 底盘测功机再现 |
China National Standards Load |
English PDF |
| GB/T 12428-2023 |
Calculation method of passenger car Loading mass {译} 客车装载质量计算方法 |
China National Standards Load |
English PDF |
| GB/T 43316.2-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 2: Constant tensile Load method {译} 塑料 耐环境应力开裂(ESC)的测定 第2部分:恒定拉伸负荷法 |
China National Standards Load |
English PDF |
| GB/T 15241.1-2023 |
Ergonomic principles related to mental Load Part 1: Mental load terminology and assessment methods {译} 与心理负荷相关的工效学原则 第1部分：心理负荷术语与测评方法 |
China National Standards Load |
English PDF |
| GB/T 17382-2023 |
Series 1 Containers Loading, Unloading and Bolting {译} 系列1集装箱 装卸和栓固 |
China National Standards Load |
English PDF |
| GB/Z 43065.2-2023 |
Robots Safety Design of Industrial Robot Systems Part 2: Manual Loading/Unloading Workstations {译} 机器人 工业机器人系统的安全设计 第2部分：手动装载/卸载工作站 |
China National Standards Load |
English PDF |
| GB/T 43057-2023 |
Photovoltaic module dynamic mechanical Load test {译} 光伏组件 动态机械载荷试验 |
China National Standards Load |
English PDF |
| GB/T 43028-2023 |
Special requirements for Load shedding equipment (LSE) {译} 甩负荷设备（LSE）的特殊要求 |
China National Standards Load |
English PDF |
| GB/T 25619-2023 |
Earthmoving machinery - attachment of skid steer Loader attachments {译} 土方机械 滑移转向装载机附属装置的联接 |
China National Standards Load |
English PDF |
| GB/T 17421.1-2023 |
General principles for inspection of machine tools Part 1: Geometric accuracy of machine tools under no-Load or quasi-static conditions {译} 机床检验通则 第1部分：在无负荷或准静态条件下机床的几何精度 |
China National Standards Load |
English PDF |
| GB/T 70.3-2023 |
Reduced Load capacity hexagon socket head screws {译} 降低承载能力內六角沉头螺钉 |
China National Standards Load |
English PDF |
| GB/T 42804-2023 |
Baby products - general technical requirements for Load-bearing pacifiers {译} 婴童用品 承载式安抚器具通用技术要求 |
China National Standards Load |
English PDF |
| GB/T 8094-2023 |
Harvesting machinery—Combine harvesters—Determination of grain tank capacity and performance of grain unLoading mechanism {译} 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定 |
China National Standards Load |
English PDF |
| GB/T 42725-2023 |
International Trade Business Process Specification Verified Gross Mass of Loaded Containers {译} 国际贸易业务流程规范 经核实的载货集装箱总质量 |
China National Standards Load |
English PDF |
| GB/T 5989-2023 |
Refractories - Test method for softening temperature under Load (differential heating method) {译} 耐火材料 荷重软化温度试验方法(示差升温法) |
China National Standards Load |
English PDF |
| GB/T 19314.10-2023 |
Small boats - Hull structure and member dimensions - Part 10: Sail Loads and sail accessories for sailing yachts {译} 小艇 艇体结构和构件尺寸 第10部分：帆艇帆装载荷及帆装附件 |
China National Standards Load |
English PDF |
| GB/T 21559.2-2023 |
Rolling bearings - Rolling bearings for linear motion - Part 2: Static Load ratings {译} 滚动轴承 直线运动滚动支承 第2部分：额定静载荷 |
China National Standards Load |
English PDF |
| GB/T 21559.1-2023 |
Rolling bearings - Rolling bearings for linear motion - Part 1: Dynamic Load ratings and rating life {译} 滚动轴承 直线运动滚动支承 第1部分：额定动载荷和额定寿命 |
China National Standards Load |
English PDF |
| GB/T 26949.8-2022 |
Industrial vehicles - Stability verification - Part 8: Additional stability tests for stacking operations with mast tilted forward and Load lifted {译} 工业车辆 稳定性验证 第8部分：在门架前倾和载荷起升条件下堆垛作业的附加稳定性试验 |
China National Standards Load |
English PDF |
| GB/T 10827.3-2022 |
Industrial vehicles - Safety requirements and verification - Part 3: Additional requirements for vehicles with lifted operating platforms and vehicles specially designed to operate with lifted Loads {译} 工业车辆 安全要求和验证 第3部分：对带有起升操作台的车辆和专门设计为带起升载荷运行的车辆的附加要求 |
China National Standards Load |
English PDF |
| GB/T 41576-2022 |
Requirements for unit performance test after fuel Loading in pressurized water reactor nuclear power plant {译} 压水堆核电厂装料后机组性能试验要求 |
China National Standards Load |
English PDF |
| GB/T 41584-2022 |
Requirements for thermal state performance test before fuel Loading in pressurized water reactor nuclear power plant {译} 压水堆核电厂装料前热态性能试验要求 |
China National Standards Load |
English PDF |
| GB/T 41587-2022 |
Requirements for cold-state performance test before fuel Loading in pressurized water reactor nuclear power plant {译} 压水堆核电厂装料前冷态性能试验要求 |
China National Standards Load |
English PDF |
| GB/T 42284.5-2022 |
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 5: Chemical Loads {译} 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第5部分：化学负荷 |
China National Standards Load |
English PDF |
| GB/T 42284.4-2022 |
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 4: Climatic Loads {译} 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第4部分：气候负荷 |
China National Standards Load |
English PDF |
| GB/T 42284.3-2022 |
Road vehicles - Environmental conditions and tests for electrical and electronic equipment used in electric vehicle drive systems - Part 3: Mechanical Loads {译} 道路车辆 电动汽车驱动系统用电气及电子设备的环境条件和试验 第3部分：机械负荷 |
China National Standards Load |
English PDF |
| GB/T 42213-2022 |
Space PayLoad Refly Requirements {译} 空间有效载荷再飞要求 |
China National Standards Load |
English PDF |
| GB/T 42279-2022 |
Vulcanized or thermoplastic rubber Determination of tensile set at constant elongation and determination of tensile set, elongation and creep at constant tensile Load {译} 硫化橡胶或热塑性橡胶 在恒定伸长率下测定拉伸永久变形及在恒定拉伸载荷下测定拉伸永久变形、伸长率和蠕变 |
China National Standards Load |
English PDF |
| GB/T 41794-2022 |
Geosynthetics - Evaluation of stress cracking resistance of polyolefin geomembranes - Notched constant tensile Load method {译} 土工合成材料 聚烯烃土工膜耐应力开裂性能的评价 切口恒定拉伸负荷法 |
China National Standards Load |
English PDF |
| GB/T 19668.7-2022 |
Information technology services—Supervision—Part 7: Requirements for the measurement of supervision workLoad {译} 信息技术服务 监理 第7部分：监理工作量度量要求 |
China National Standards Load |
English PDF |
| GB/T 41596-2022 |
Load securing devices for road vehicles - General requirements for tensioning devices {译} 道路车辆装载物固定装置 拉紧装置通用要求 |
China National Standards Load |
English PDF |
| GB/T 42046-2022 |
Manned Spacecraft PayLoad Transportation Requirements {译} 载人航天器载荷运输要求 |
China National Standards Load |
English PDF |
| GB/T 42044-2022 |
General Design Requirements for Space Station Application PayLoads {译} 空间站应用有效载荷通用设计要求 |
China National Standards Load |
English PDF |
| GB/T 42032-2022 |
Design Requirements for Civil Aircraft Loading Manifest {译} 民用飞机装载舱单设计要求 |
China National Standards Load |
English PDF |
| GB/T 16622-2022 |
Press-fit solid tire specifications, dimensions and Loads {译} 压配式实心轮胎规格、尺寸与负荷 |
China National Standards Load |
English PDF |
| GB/T 42049-2022 |
Rolling bearings for aircraft airframes - Characteristics, dimensions, tolerances and static Load ratings {译} 飞机机体用滚动轴承 特性、外形尺寸、公差和额定静负荷 |
China National Standards Load |
English PDF |
| GB/T 12639-2021 |
Methods of in-orbit testing for GEO communication satellite payLoad performance 地球同步轨道通信卫星有效载荷在轨测试方法 |
China National Standards Load |
English PDF |
| GB/T 40497-2021 |
Evaluation principles for the design of offshore facilities against fire and blast Loading 海上设施防火与防爆设计评估原则 |
China National Standards Load |
English PDF |
| GB/T 40310.2-2021 |
Ball splines—Part 2:Dynamic and static Load ratings and rating life 滚动花键副 第2部分：动态和静态额定载荷和额定寿命 |
China National Standards Load |
English PDF |
| GB/T 40116-2021 |
Foil bearings - Performance of hydrodynamic gas journal bearings - Testing of static Load capacity, friction coefficient and lifetime 箔片轴承 气体动压径向轴承性能 静态承载能力、摩擦因数和寿命测试 |
China National Standards Load |
English PDF |
| GB/T 14230-2021 |
Test method of tooth bending strength for gear Load capacity 齿轮弯曲疲劳强度试验方法 |
China National Standards Load |
English PDF |
| GB/T 14229-2021 |
Test method of surface contact strength for gear Load capacity 齿轮接触疲劳强度试验方法 |
China National Standards Load |
English PDF |
| GB/T 3480.5-2021 |
Calculation of Load capacity of spur and helical gears—Part 5:Strength and quality of materials 直齿轮和斜齿轮承载能力计算 第5部分：材料的强度和质量 |
China National Standards Load |
English PDF |
| GB/T 39982-2021 |
Water lubricated journal bearings—Test methods of Load carrying capacity 水润滑径向滑动轴承 承载能力测试方法 |
China National Standards Load |
English PDF |
| GB/T 12243-2021 |
Spring Loaded safety valves 弹簧直接载荷式安全阀 |
China National Standards Load |
English PDF |
| GB/T 3480.3-2021 |
Calculation of Load capacity of spur and helical gears—Part 3: Calculation of tooth bending strength 直齿轮和斜齿轮承载能力计算 第3部分：轮齿弯曲强度计算 |
China National Standards Load |
English PDF |
| GB/T 39693.3-2021 |
Rubber, vulcanized or thermoplastic—Determination of hardness—Part 3:Dead-Load hardness using the very low rubber hardness (VLRH) scale 硫化橡胶或热塑性橡胶 硬度的测定 第3部分：用超低橡胶硬度（VLRH）标尺 测定定试验力硬度 |
China National Standards Load |
English PDF |
| GB/T 39598-2021 |
A guide to the limited quantity in indoor Loading for wood-based panel based on its ultimate formaldehyde emission 基于极限甲醛释放量的人造板室内承载限量指南 |
China National Standards Load |
English PDF |
| GB/T 17215.221-2021 |
Electricity metering equipment(a. c. ) -- General requirements, tests and test conditions -- Part 21: Tariff and Load control equipment 电测量设备（交流） 通用要求、试验和试验条件 第21部分：费率和负荷控制设备 |
China National Standards Load |
English PDF |
| GB/T 3480.2-2021 |
Calculation of Load capacity of spur and helical gears—Part 2: Calculation of surface durability (pitting) 直齿轮和斜齿轮承载能力计算 第2部分：齿面接触强度（点蚀）计算 |
China National Standards Load |
English PDF |
| GB/T 21938-2021 |
Earth-moving machinery─Hydraulic excavator and backhoe Loader lowering control device─Requirements and tests 土方机械 液压挖掘机和挖掘装载机下降控制装置 要求和试验 |
China National Standards Load |
English PDF |
| GB/T 22437.5-2021 |
Cranes—Design principles for Loads and load combinations—Part 5：Overhead travelling and portal bridge cranes 起重机 载荷与载荷组合的设计原则 第5部分：桥式和门式起重机 |
China National Standards Load |
English PDF |
| GB/T 8100.3-2021 |
Mounting surfaces of hydraulic valves—Part 3: Pressure-reducing valves, sequence valves, unLoading valves, throttle valves and check valves 液压阀安装面 第3部分：减压阀、顺序阀、卸荷阀、节流阀和单向阀 |
China National Standards Load |
English PDF |
| GB/T 41098-2021 |
Cranes -- Safety -- Load lifting attachments 起重机? 安全? 起重吊具 |
China National Standards Load |
English PDF |
| GB/T 26473-2021 |
Cranes—Safety requirements for Loader cranes 起重机 随车起重机安全要求 |
China National Standards Load |
English PDF |
| GB/T 38055.4-2021 |
Rough-terrain trucks—User requirements—Part 4: Additional requirements for variable-reach trucks handling freely suspended Loads 越野叉车 对用户的要求 第4部分:悬吊可自由摆动载荷伸缩臂式叉车的附加要求 |
China National Standards Load |
English PDF |
| GB/T 25684.4-2021 |
Earth-moving machinery—Safety—Part 4: Requirements for backhoe Loaders 土方机械 安全 第4部分：挖掘装载机的要求 |
China National Standards Load |
English PDF |
| GB/T 25684.3-2021 |
Earth-moving machinery—Safety—Part 3: Requirements for Loaders 土方机械 安全 第3部分：装载机的要求 |
China National Standards Load |
English PDF |
| GB/T 26475-2021 |
Bridge type grab ship unLoader 桥式抓斗卸船机 |
China National Standards Load |
English PDF |
| GB/T 35205.7-2021 |
Rough-terrain trucks—Safety requirements and verificaiton—Part 7:longitudinal Load moment systems 越野叉车 安全要求及验证 第7部分：纵向载荷力矩系统 |
China National Standards Load |
English PDF |
| GB/T 10170-2021 |
Earth-moving machinery -- Backhoe Loader -- Technical specifications 土方机械 挖掘装载机 技术条件 |
China National Standards Load |
English PDF |
| GB/T 25694-2021 |
Earth-moving machinery—Skid-steer Loaders 土方机械 滑移转向装载机 |
China National Standards Load |
English PDF |
| GB/T 41192-2021 |
Instrument for geotechnical engineering -- Vibrating wire Load cell 岩土工程仪器? 振弦式反力计 |
China National Standards Load |
English PDF |
| GB/T 41024-2021 |
Load combination and design criteria for structural analysis of spent fuel transport cask 乏燃料运输容器结构分析的载荷组合和设计准则 |
China National Standards Load |
English PDF |
| GB/T 4652-2021 |
Loader for underground mining—Testing method 地下矿用装岩机和装载机 试验方法 |
China National Standards Load |
English PDF |
| GB/T 40588-2021 |
Technical provisions for automatic under-voltage Load shedding in electric power systems 电力系统自动低压减负荷技术规定 |
China National Standards Load |
English PDF |
| GB/T 40596-2021 |
Technical rules for automatic under-frequency Load shedding in electric power systems 电力系统自动低频减负荷技术规定 |
China National Standards Load |
English PDF |
| GB/T 40708-2021 |
Container transportation electronic data interchange—Container discharge/Loading (vessel) report message 集装箱运输电子数据交换 集装箱装卸（船）报告报文 |
China National Standards Load |
English PDF |
| GB/T 39210-2020 |
Draught and soil Loading system of hopper dredger 耙吸挖泥船吃水装载系统 |
China National Standards Load |
English PDF |
| GB/T 10168-2020 |
Earth-moving machinery—Backhoe Loaders—Terminology and commercial specifications 土方机械 挖掘装载机 术语和商业规格 |
China National Standards Load |
English PDF |
| GB/T 38830-2020 |
Technical requirements for IPTV media delivery system—Global Load balance subsystem IPTV媒体交付系统技术要求 全局负载均衡子系统 |
China National Standards Load |
English PDF |
| GB/T 38769-2020 |
Metallic materials－Measurement of fracture toughness at impact Loading rates using precracked Charpy-type test pieces 金属材料 预裂纹夏比试样冲击加载断裂韧性的测定 |
China National Standards Load |
English PDF |
| GB/T 38612-2020 |
Test method of artificial leather and synthetic leather—Determination of tensile Load and elongation at break 人造革合成革试验方法 拉伸负荷及断裂伸长率的测定 |
China National Standards Load |
English PDF |
| GB/T 51394-2020 |
Load standard for hydraulic structures 水工建筑物荷载标准 |
China National Standards Load |
English PDF |
| GB 9706.217-2020 |
Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterLoading equipment 医用电气设备 第2-17部分：自动控制式近距离治疗后装设备的基本安全和基本性能专用要求 |
China National Standards Load |
English PDF |
| GB/T 39271.2-2020 |
Rolling bearings—Load ratings for hybrid bearings with rolling elements made of ceramic—Part 2:Static load ratings 滚动轴承 陶瓷滚动体混合轴承的额定载荷 第2部分：额定静载荷 |
China National Standards Load |
English PDF |
| GB/T 39271.1-2020 |
Rolling bearings—Load ratings for hybrid bearings with rolling elements made of ceramic—Part 1: Dynamic load ratings 滚动轴承 陶瓷滚动体混合轴承的额定载荷 第1部分：额定动载荷 |
China National Standards Load |
English PDF |
| GB/T 21296.3-2020 |
Automatic instruments for weighing road vehicles in motion—Part 3：Weighing axle Loads 动态公路车辆自动衡器 第3部分：轴重式 |
China National Standards Load |
English PDF |
| GB/T 21296.2-2020 |
Automatic instruments for weighing road vehicles in motion—Part 2：Weighing whole Loads 动态公路车辆自动衡器 第2部分：整车式 |
China National Standards Load |
English PDF |
| GB/T 39484-2020 |
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-Loaded split(C-ELS) test and an effective crack length approach 纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性 |
China National Standards Load |
English PDF |
| GB/T 3480.1-2019 |
Calculation of Load capacity of spur and helical gears—Part 1: Basic principles, introduction and general influence factors 直齿轮和斜齿轮承载能力计算 第1部分：基本原理、概述及通用影响系数 |
China National Standards Load |
English PDF |
| GB/T 15227-2019 |
Test method of air permeability, watertightness, wind Load resistance performance for curtain walls 建筑幕墙气密、水密、抗风压性能检测方法 |
China National Standards Load |
English PDF |
| GB/T 7106-2019 |
Test methods of air permeability,watertightness,wind Load resistance performance for building external windows and doors 建筑外门窗气密、水密、抗风压性能检测方法 |
China National Standards Load |
English PDF |
| GB/T 15227-2019 |
Test method of air permeability, watertightness, wind Load resistance performance for curtain walls 建筑幕墙气密、水密、抗风压性能检测方法 |
China National Standards Load |
English PDF |
| GB/T 7106-2019 |
Test methods of air permeability,watertightness,wind Load resistance performance for building external windows and doors 建筑外门窗气密、水密、抗风压性能检测方法 |
China National Standards Load |
English PDF |
| GB/T 37922-2019 |
Palletized unit Load-based logistics system—General technical specification 托盘单元化物流系统 通用技术条件 |
China National Standards Load |
English PDF |
| GB/T 37900-2019 |
Test method of hardness and fracture toughness for ultra-thin glass—Low-Load vickers hardness indentation method 超薄玻璃硬度和断裂韧性试验方法 小负荷维氏硬度压痕法 |
China National Standards Load |
English PDF |
| GB/T 37825-2019 |
Test method for simulating wind pressure resistance of building glass under the uniform static Loads 建筑玻璃均布静载模拟风压试验方法 |
China National Standards Load |
English PDF |
| GB/T 13751-2019 |
Earth-moving machinery—Backhoe Loaders—Methods of tests 土方机械 挖掘装载机 试验方法 |
China National Standards Load |
English PDF |
| GB/T 1634.2-2019 |
Plastics-Determination of temperature of deflection under Load-Part 2:Plastics and ebonite 塑料 负荷变形温度的测定 第2部分：塑料和硬橡胶 |
China National Standards Load |
English PDF |
| GB/T 1634.1-2019 |
Plastics—Determination of temperature of deflection under Load—Part 1:General test method 塑料 负荷变形温度的测定 第1部分:通用试验方法 |
China National Standards Load |
English PDF |
| GB/T 37745-2019 |
Static and cyclic lateral Load test methods for timber structure shear walls 木结构剪力墙静载和低周反复水平加载试验方法 |
China National Standards Load |
English PDF |
| GB/T 37348-2019 |
Design guidelines for deck Loading plan of self-elevating drilling units 自升式钻井平台甲板载荷图设计指南 |
China National Standards Load |
English PDF |
| GB/T 3142-2019 |
Standard test method for determination of Load-carrying capacity of lubricants—Four-ball method 润滑剂承载能力的测定 四球法 |
China National Standards Load |
English PDF |
| GB/T 32076.10-2018 |
High-strength structural bolting assemblies for preLoading—Part 10：Assembly specifications 预载荷高强度栓接结构连接副-第10部分：安装技术条件 |
China National Standards Load |
English PDF |
| GB/T 3480.6-2018 |
Calculation of Load capacity of spur and helical gears—Part 6:Calculation of service life under variable load 直齿轮和斜齿轮承载能力计算-第6部分：变载荷条件下的使用寿命计算 |
China National Standards Load |
English PDF |
| GB/T 37106-2018 |
Palletized unit Load-based logistics system—Design criteria of pallets 托盘单元化物流系统-托盘设计准则 |
China National Standards Load |
English PDF |
| GB/T 36977-2018 |
Earth-moving machinery —Forklift wheel Loader—Methods of tests 土方机械-轮胎式叉装机-试验方法 |
China National Standards Load |
English PDF |
| GB/T 36978-2018 |
Earth-moving machinery — Fuel consumption for forklift wheel Loader — Test methods 土方机械-轮胎式叉装机燃油消耗量-试验方法 |
China National Standards Load |
English PDF |
| GB/T 36974-2018 |
Earth-moving machinery—Forklift wheel Loader—Technical specifications 土方机械-轮胎式叉装机-技术条件 |
China National Standards Load |
English PDF |
| GB/T 37257-2018 |
Wind turbines—Measurement of mechanical Loads 风力发电机组-机械载荷测量 |
China National Standards Load |
English PDF |
| GB/T 2980-2018 |
Size designation，dimensions,inflation pressure and Load capacity for earth-mover tyres 工程机械轮胎规格、尺寸、气压与负荷 |
China National Standards Load |
English PDF |
| GB/T 22437.1-2018 |
Cranes—Design principles for Loads and load combinations—Part 1：General 起重机 载荷与载荷组合的设计原则 第1部分：总则 |
China National Standards Load |
English PDF |
| GB/T 35092-2018 |
Methods of static Load deflection measurement for hydraulic presses 液压机静载变形测量方法 |
China National Standards Load |
English PDF |
| GB/T 35016-2018 |
Continuous mechanical handling equipment—Loading and unloading—Safety code 连续搬运机械 装卸机械 安全规范 |
China National Standards Load |
English PDF |
| GB/T 26949.5-2018 |
Industrial trucks—Verification of stability—Part 5:Single-side-Loading trucks 工业车辆 稳定性验证 第5部分：侧面式叉车（单侧） |
China National Standards Load |
English PDF |
| GB/T 36297-2018 |
Field test characteristics of optical remote sensing payLoad 光学遥感载荷性能外场测试评价指标 |
China National Standards Load |
English PDF |
| GB/T 36410.3-2018 |
Energy consumption evaluation methods of port equipment—Part 3: Bridge type grab ship unLoader 港口设备能源消耗评价方法 第3部分：桥式抓斗卸船机 |
China National Standards Load |
English PDF |
| GB/T 36410.4-2018 |
Energy consumption evaluation methods of port equipment—Part 4: Bulk ship Loader 港口设备能源消耗评价方法 第4部分：散货连续装船机 |
China National Standards Load |
English PDF |
| GB/T 36409-2018 |
Method of structural design for self-elevating units—Load and resistance factor design (LRFD) method 自升式平台结构设计方法 载荷抗力系数设计法 |
China National Standards Load |
English PDF |
| GB/Z 36517-2018 |
Rolling bearings—Methods for calculating the modified reference rating life for universally Loaded bearings 滚动轴承 一般载荷条件下轴承修正参考额定寿命计算方法 |
China National Standards Load |
English PDF |
| GB/T 36579-2018 |
Load test method of cantilever system for self-elevating drilling unit 自升式钻井平台悬臂梁负荷试验方法 |
China National Standards Load |
English PDF |
| GB/T 36696-2018 |
Earth-moving machinery—Fuel consumption for wheel Loader —Test methods 土方机械 轮胎式装载机燃油消耗量 试验方法 |
China National Standards Load |
English PDF |
| GB/T 35975-2018 |
Load lifting attachments—Classification 起重吊具 分类 |
China National Standards Load |
English PDF |
| GB/T 13772.2-2018 |
Textiles—Determination of the slippage resistance of yarns at seam in woven fabric—Part 2: Fixed Load method 纺织品 机织物接缝处纱线抗滑移的测定 第2部分：定负荷法 |
China National Standards Load |
English PDF |
| GB/T 22319.11-2018 |
Measurement of quartz crystal unit parameters—Part 11:Standard method for the determination of the Load resonance frequency fL and the effective load capacitance CLeff using automatic network analyzer techniques and error correction 石英晶体元件参数的测量 第11部分：采用自动网络分析技术和误差校正确定负载谐振频率和有效负载电容的标准方法 |
China National Standards Load |
English PDF |
| GB/T 34824-2017 |
The test method of wind Load resistance performance for screens of windows and doors 建筑纱门窗抗风性能检测方法 |
China National Standards Load |
English PDF |
| GB/T 34829-2017 |
Space station specification of utilization payLoad data communication 空间站应用有效载荷数据通信规范 |
China National Standards Load |
English PDF |
| GB/T 21211-2017 |
Equivalent Loading and superposition techniques—Indirect testing to determine temperature rise of rotating electrical machines 等效负载和叠加试验技术 间接法确定旋转电机温升 |
China National Standards Load |
English PDF |
| GB/T 34928-2017 |
Load commutated soft-start device 负载换相型软起动装置 |
China National Standards Load |
English PDF |
| GB/T 34719-2017 |
Standard test method for performance of structural wood-based panel under uniform Loads 结构用人造板均布荷载性能测试方法 |
China National Standards Load |
English PDF |
| GB/T 34725-2017 |
Standard test method for performance of structural wood-based panel under concentrated static and impact Loads 结构用人造板集中荷载和冲击荷载性能测试方法 |
China National Standards Load |
English PDF |
| GB/T 34555-2017 |
Test method of air permeability, watertightness,wind Load resistance performance for building skylight system 建筑采光顶气密、水密、抗风压性能检测方法 |
China National Standards Load |
English PDF |
| GB/T 34525-2017 |
Safety rules for handling, Loading and unloading, storing and using of cylinder 气瓶搬运、装卸、储存和使用安全规定 |
China National Standards Load |
English PDF |
| GB/T 33941.3-2017 |
Earth-moving machinery—Structure stress test method—Part 3: Equipments and attachments of Loaders, excavators and backhoe loaders 土方机械 结构件应力测试方法 第3部分：装载机、挖掘机和挖掘装载机的工作装置和附属装置 |
China National Standards Load |
English PDF |
| GB/T 34394-2017 |
Maximum working Load for flat pallets 平托盘最大工作载荷 |
China National Standards Load |
English PDF |
| GB/T 2979-2017 |
Size designation, dimensions, inflation pressure and Load capacity for agricultural tyres 农业轮胎规格、尺寸、气压与负荷 |
China National Standards Load |
English PDF |
| GB/T 32076.8-2017 |
High-strength structural bolting assemblies for preLoading—Part 8: Torshear type bolt with cup head,and nut assemblies 预载荷高强度栓接结构连接副 第8部分：扭剪型圆头螺栓和螺母连接副 |
China National Standards Load |
English PDF |
| GB/T 3690-2017 |
Textile conveyor belts—Full thickness tensile strength,elongation at break and elongation at the reference Load—Test method 织物芯输送带 全厚度拉伸强度、拉断伸长率和参考力伸长率 试验方法 |
China National Standards Load |
English PDF |
| GB/T 34211-2017 |
Iron ores—Method for determination of iron reduction softening drippinger performance under Load 铁矿石 高温荷重还原软熔滴落性能测定方法 |
China National Standards Load |
English PDF |
| GB/T 17855-2017 |
Calculation of Load capacity of spline 花键承载能力计算方法 |
China National Standards Load |
English PDF |
| GB/T 33941.2-2017 |
Earth-moving machinery—Structure stress test method—Part 2: Frame of wheeled Loaders 土方机械 结构件应力测试方法 第2部分：轮胎式装载机机架 |
China National Standards Load |
English PDF |
| GB/T 33932-2017 |
Forklift Loaders for natural stone mining—Safety requirements 天然石开采叉装车 安全要求 |
China National Standards Load |
English PDF |
| GB/T 32076.9-2017 |
High-strength structural bolting assemblies for preLoading—Part 9: Torshear type bolt with hexagon head with large width across flats，and nut assemblies 预载荷高强度栓接结构连接副 第9部分：扭剪型大六角头螺栓和螺母连接副 |
China National Standards Load |
English PDF |
| GB/T 1149.15-2017 |
Internal combustion engines—Piston rings—Part 15: Coil-spring-Loaded oil control rings of narrow width made of cast iron 内燃机 活塞环 第15部分：薄型铸铁螺旋撑簧油环 |
China National Standards Load |
English PDF |
| GB/T 25604-2017 |
Earth-moving machinery—Loaders—Terminology and commercial specifications 土方机械 装载机 术语和商业规格 |
China National Standards Load |
English PDF |
| GB/T 35716-2017 |
OverLoad protectors for hermetic motor-compressors 全封闭电动机-压缩机用热保护器 |
China National Standards Load |
English PDF |
| GB/T 35199-2017 |
Earth-moving machinery—Wheeled Loader—Technical specifications 土方机械 轮胎式装载机 技术条件 |
China National Standards Load |
English PDF |
| GB/T 35449-2017 |
Automatic quantitative Loading vehicle system 自动定量装车系统 |
China National Standards Load |
English PDF |
| GB/T 35198-2017 |
Earth-moving machinery—Wheeled Loader—Test methods 土方机械 轮胎式装载机 试验方法 |
China National Standards Load |
English PDF |
| GB/T 2315-2017 |
Specified failure Load series and coupling dimensions for electric power fittings 电力金具标称破坏载荷系列及连接型式尺寸 |
China National Standards Load |
English PDF |
| GB/T 35439-2017 |
General requirement of safety, reliability and maintainability assurance for the application payLoads of space station 空间站应用有效载荷安全性、可靠性与维修性保证通用要求 |
China National Standards Load |
English PDF |
| GB/T 14048.12-2016 |
Low-voltage switchgear and controlgear—Part 4-3: Contactors and motor-starters—AC semiconductor controllers and contactors for non-motor Loads 低压开关设备和控制设备 第4-3部分：接触器和电动机起动器 非电动机负载用交流半导体控制器和接触器 |
China National Standards Load |
English PDF |
| GB/T 33333-2016 |
Determination of shear strength by tensile Loading in wood adhesives 木材胶粘剂拉伸剪切强度的试验方法 |
China National Standards Load |
English PDF |
| GB/T 33334-2016 |
Test method for strength properties of adhesives in shear by tension Loading of single-lap-joint laminated assemblies(composite and composite) 胶粘剂单搭接拉伸剪切强度试验方法（复合材料对复合材料） |
China National Standards Load |
English PDF |
| GB/T 15789-2016 |
Geotextiles and geotextile-related products—Determination of water permeability characteristics normal to the plane，without Load 土工布及其有关产品 无负荷时垂直渗透特性的测定 |
China National Standards Load |
English PDF |
| GB/T 33002-2016 |
Thermal insulating products for building applications—Determination of deformation under specified compressive Load and temperature conditions 建筑用绝热制品 在规定压缩载荷和温度条件下变形的测定 |
China National Standards Load |
English PDF |
| GB/T 33158-2016 |
Thermal insulating products for building applications—Determination of behaviour under cyclic Loading 建筑用绝热制品 循环载荷性能的测定 |
China National Standards Load |
English PDF |
| Find out:438Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
