Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 40968-2021 |
Test Methods for Polycyclic Aromatic Hydrocarbons in Musical Instruments (Amendment No. 1) {译} 乐器产品中多环芳烃的测试方法《第1号修改单》 |
China National Standards Test, |
 English PDF |
| GB/T 46991.1-2025 |
Durability Requirements and Test Methods for On-board Power Batteries for Electric Vehicles - Part 1: Light Vehicles {译} 电动汽车车载动力电池耐久性要求及试验方法 - 第1部分:轻型汽车 |
China National Standards Test, |
English PDF |
| GB/T 46990-2025 |
Electrical Performance Requirements and Test Methods for Double-Layer Capacitors for Hybrid Electric Vehicles {译} 混合动力汽车用双电层电容器电性能要求及试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46989.1-2025 |
Photovoltaic Modules - Transportation Testing - Part 1: Transportation and Handling of Component Packaging Units {译} 光伏组件 - 运输试验 - 第1部分：组件包装单元的运输和装卸 |
China National Standards Test, |
English PDF |
| GB/T 46988-2025 |
Photovoltaic Modules - Non-Uniform Snow Load Testing {译} 光伏组件 - 非均匀雪载荷试验 |
China National Standards Test, |
English PDF |
| GB/T 46986.2-2025 |
Photovoltaic Systems - Test, Documentation, and Maintenance Requirements - Part 2: Grid-Connected Systems - Maintenance of Photovoltaic Systems {译} 光伏系统 - 测试、文件和维护要求 - 第2部分：并网系统 - 光伏系统的维护 |
China National Standards Test, |
English PDF |
| GB/T 46986.1-2025 |
Photovoltaic Systems - Test, Documentation, and Maintenance Requirements - Part 1: Documentation, Commissioning Testing, and Inspection of Grid-Connected Photovoltaic Systems {译} 光伏系统 - 测试、文件和维护要求 - 第1部分：并网光伏系统的文件、试运行测试和检验 |
China National Standards Test, |
English PDF |
| GB/T 46984.1-2025 |
Photovoltaic Cells - Part 1: Test Methods for Light-Induced Degradation of Crystalline Silicon Photovoltaic Cells {译} 光伏电池 - 第1部分：晶体硅光伏电池光致衰减试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46983.703-2025 |
Test Procedures for Materials Used in Photovoltaic Modules - Part 7-3: Accelerated Stress Testing - Test Methods for Abrasion on the Outer Surface of Photovoltaic Modules {译} 光伏组件用材料测试程序 - 第7-3部分：加速压力测试 - 光伏组件外表面的磨损测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46981-2025 |
Extended Thermal Cycling of Photovoltaic Modules - Test Procedures {译} 光伏组件扩展热循环 - 试验程序 |
China National Standards Test, |
English PDF |
| GB/T 46980-2025 |
Test Methods for Fire Resistance Performance of Photovoltaic Modules {译} 光伏组件防火性能试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46974-2025 |
Footwear - Chemical Testing Methods Determination of Short-Chain Chlorinated Paraffins {译} 鞋类 - 化学试验方法 - 短链氯化石蜡的测定 |
China National Standards Test, |
English PDF |
| GB/T 46958-2025 |
Road Vehicles - Autonomous Driving System Test Scenarios - Scenario-Based Safety Assessment Framework {译} 道路车辆 - 自动驾驶系统测试场景 - 基于场景的安全评估框架 |
China National Standards Test, |
English PDF |
| GB/T 46943-2025 |
Clinical Laboratory Testing and In Vitro Diagnostic Systems - General Requirements for Performance Validation of High-Throughput Metagenomic Sequencing of Pathogens {译} 临床实验室检测和体外诊断系统 - 病原宏基因组高通量测序性能确认通用要求 |
China National Standards Test, |
English PDF |
| GB/T 46937-2025 |
Test Methods for Virus Filtration Efficiency of Medical Masks and Materials - Phi-X174 Phage Aerosol Method {译} 医用口罩及材料病毒过滤效率测试方法 - Phi-X174噬菌体气溶胶法 |
China National Standards Test, |
English PDF |
| GB/T 46926-2025 |
Technical Requirements and Test Methods for Vision Assist Systems for Light Vehicles {译} 轻型汽车视野辅助系统技术要求及试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46921-2025 |
Dedicated Digital Trunking Communication System for Time Division Multiple Access (TDMA) Based on 12.5kHz Channel - Compatibility Testing {译} 基于12.5kHz信道的时分多址（TDMA）专用数字集群通信系统 - 兼容性测试 |
China National Standards Test, |
English PDF |
| GB/T 46910.2-2025 |
Non-Destructive Testing - Acoustic and Vibration Testing of Resin-Based Composite Parts - Part 2: Mechanical Impedance Test {译} 无损检测 - 树脂基复合材料制件的声振检测 - 第2部分：机械阻抗法 |
China National Standards Test, |
English PDF |
| GB/T 46910.1-2025 |
Non-Destructive Testing - Acoustic and Vibration Testing of Resin-Based Composite Parts - Part 1: Impact Test {译} 无损检测 - 树脂基复合材料制件的声振检测 - 第1部分：敲击法 |
China National Standards Test, |
English PDF |
| GB/T 46908-2025 |
Packaging - Dangerous Goods Transport Packaging - Compatibility Testing of Plastic Packaging and Plastic Intermediate Bulk Containers (IBCs) {译} 包装 - 危险货物运输包装 - 塑料包装和塑料中型散装容器（IBCs）的相容性试验 |
China National Standards Test, |
English PDF |
| GB/T 46899.1-2025 |
Electricity Meters - Test Equipment, Technology and Procedures - Part 1: Fixed Electricity Meter Test Units (MTUs) {译} 电能表 - 试验设备、技术和程序 - 第1部分：固定式电能表试验装置（MTUs） |
China National Standards Test, |
English PDF |
| GB/T 46896-2025 |
Road Vehicles - Autonomous Driving System Test Scenarios - Terminology {译} 道路车辆 - 自动驾驶系统测试场景 - 术语 |
China National Standards Test, |
English PDF |
| GB/T 46895-2025 |
Artificial Instantaneous Short Circuit Test Methods for High-Voltage Transmission Lines {译} 高压输电线路人工瞬时短路试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46894-2025 |
General Specifications for Electromagnetic Compatibility Testing of Vehicle Integrated Circuits {译} 车辆集成电路电磁兼容试验通用规范 |
China National Standards Test, |
English PDF |
| GB/T 46892-2025 |
Test Method for Thermal Conductivity of Printed Circuit Boards for High-Brightness LEDs {译} 高亮度LED用印制板热导率测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46882-2025 |
Access Network Equipment Testing Methods - Interoperability of 10Gbit/s Asymmetric/Symmetric Passive Optical Networks (XG-PON/XGS-PON) {译} 接入网设备测试方法 - 10Gbit/s非对称/对称无源光网络（XG-PON/XGS-PON）互通性 |
China National Standards Test, |
English PDF |
| GB/T 46851-2025 |
Intelligent Ships - Technical Requirements and Test Methods for Collision Avoidance Systems {译} 智能船舶 - 避碰系统技术要求及测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46849.5-2025 |
Technical Product Documents - Model Definition Requirements - Part 5: Testing Data {译} 技术产品文件 - 基于模型定义要求 - 第5部分：检测数据 |
China National Standards Test, |
English PDF |
| GB/T 46821-2025 |
Embedded Substrate Test Methods {译} 嵌入式基板测试方法 |
China National Standards Test, |
English PDF |
| GB/T 44067.4-2025 |
Industrial Internet Platform - Technical Requirements and Test Methods - Part 4: Edge Computing Platforms {译} 工业互联网平台 - 技术要求及测试方法 - 第4部分：边缘计算平台 |
China National Standards Test, |
English PDF |
| GB/T 40808.3-2025 |
Machine Tool Environmental Assessment - Part 3: Energy Efficiency Testing Principles for Metal Cutting Machine Tools {译} 机床环境评估 - 第3部分：金属切削机床能效测试原则 |
China National Standards Test, |
English PDF |
| GB/T 38775.10-2025 |
Wireless Charging System for Electric Vehicles Part 10: Communication Protocol Conformity Testing {译} 电动汽车无线充电系统 - 第10部分：通信协议一致性测试 |
China National Standards Test, |
English PDF |
| GB/T 38302-2025 |
Protective Clothing - Test Methods for Thermal Protection and Dummy Flame Flashover Protection Performance {译} 防护服装 - 热防护和假人火焰轰燃防护性能测试方法 |
China National Standards Test, |
English PDF |
| GB/T 35267.5-2025 |
Cleaning and Disinfection Equipment - Part 5: Performance Requirements and Test Methods for Cleaning Effectiveness {译} 清洗消毒器 - 第5部分：清洁效果的性能要求和测试方法 |
China National Standards Test, |
English PDF |
| GB/T 32358-2025 |
Rail Transit - Locomotive and Rolling Stock Bench Test Methods {译} 轨道交通 - 机车车辆台架试验方法 |
China National Standards Test, |
English PDF |
| GB/T 32073.2-2025 |
Non-destructive Testing - Ultrasonic Testing Method for Measuring Residual Stress - Part 2: Volume Wave Method {译} 无损检测 - 测量残余应力的超声检测方法 - 第2部分：体波法 |
China National Standards Test, |
English PDF |
| GB/T 32073.1-2025 |
Non-destructive Testing - Ultrasonic Testing Method for Measuring Residual Stress - Part 1: Critical Refraction Longitudinal Wave Method {译} 无损检测 - 测量残余应力的超声检测方法 - 第1部分:临界折射纵波法 |
China National Standards Test, |
English PDF |
| GB/T 31487.3-2025 |
DC De-icing Device - Part 3: Testing {译} 直流融冰装置 - 第3部分：试验 |
China National Standards Test, |
English PDF |
| GB/T 30423-2025 |
High Voltage DC Facilities - System Testing {译} 高压直流设施 - 系统试验 |
China National Standards Test, |
English PDF |
| GB/T 27406-2025 |
Laboratory Quality Control Standards - Food Toxicology Testing {译} 实验室质量控制规范 - 食品毒理学检测 |
China National Standards Test, |
English PDF |
| GB/T 22200.7-2025 |
Low-Voltage Electrical Reliability - Part 7: Reliability Test Methods for Contactors {译} 低压电器可靠性 - 第7部分：接触器可靠性试验方法 |
China National Standards Test, |
English PDF |
| GB/T 22200.6-2025 |
Low-Voltage Electrical Reliability - Part 6: Reliability Test Methods for Contactor Relays {译} 低压电器可靠性 - 第6部分：接触器式继电器可靠性试验方法 |
China National Standards Test, |
English PDF |
| GB/T 22200.5-2025 |
Low-Voltage Electrical Reliability - Part 5: Reliability Test Methods for Residual Current Operated Circuit Breakers for Household and Similar Applications {译} 低压电器可靠性 - 第5部分：家用和类似用途的剩余电流动作断路器可靠性试验方法 |
China National Standards Test, |
English PDF |
| GB/T 22200.4-2025 |
Low-Voltage Electrical Reliability - Part 4: Reliability Test Methods for Overcurrent Protection Circuit Breakers for Household and Similar Applications {译} 低压电器可靠性 - 第4部分：家用及类似场所用过电流保护断路器的可靠性试验方法 |
China National Standards Test, |
English PDF |
| GB/T 22200.3-2025 |
Low-Voltage Electrical Reliability - Part 3: Reliability Test Methods for Overload Relays {译} 低压电器可靠性 - 第3部分：过载继电器可靠性试验方法 |
China National Standards Test, |
English PDF |
| GB/T 22200.2-2025 |
Low-Voltage Electrical Reliability - Part 2: Reliability Test Methods for Molded Case Circuit Breakers {译} 低压电器可靠性 - 第2部分：塑料外壳式断路器可靠性试验方法 |
China National Standards Test, |
English PDF |
| GB/T 21561.1-2025 |
Rail Transit - Locomotives and Rolling Stock - Pantograph Characteristics and Testing - Part 1: Locomotives and Rolling Stock Pantographs {译} 轨道交通 - 机车车辆 - 受电弓特性和试验 - 第1部分：机车车辆受电弓 |
China National Standards Test, |
English PDF |
| GB/T 21427-2025 |
Special Environmental Conditions - Technical Requirements and Test Methods for Internal Combustion Engine Power Station Systems in Hot and Dry Deserts {译} 特殊环境条件 - 干热沙漠对内燃机电站系统的技术要求及试验方法 |
China National Standards Test, |
English PDF |
| GB/T 20047.2-2025 |
Photovoltaic Module Safety Assessment - Part 2: Test Requirements {译} 光伏组件安全鉴定 - 第2部分：测试要求 |
China National Standards Test, |
English PDF |
| GB/T 19394-2025 |
Photovoltaic Module UV Testing Methods {译} 光伏组件紫外试验方法 |
China National Standards Test, |
English PDF |
| GB/T 19064-2025 |
Technical Conditions and Test Methods for Residential Solar Photovoltaic Power Systems {译} 家用太阳能光伏电源系统技术条件和试验方法 |
China National Standards Test, |
English PDF |
| GB/T 9535.101-2025 |
Ground-Mounted Photovoltaic Modules - Design Qualification and Type Approval - Part 1-1: Particular Requirements for Testing Crystalline Silicon Photovoltaic Modules {译} 地面用光伏组件 - 设计鉴定和定型 - 第1-1部分：晶体硅光伏组件测试的特殊要求 |
China National Standards Test, |
English PDF |
| GB/T 6675.14-2025 |
Toy Safety - Part 14: Finger Paint Requirements and Test Methods {译} 玩具安全 - 第14部分：指画颜料要求和测试方法 |
China National Standards Test, |
English PDF |
| GB/T 6113.104-2025 |
Specifications for Radio Interference and Immunity Measurement Equipment and Methods - Parts 1-4: Radio Interference and Immunity Measurement Equipment - Antennas and Test Sites for Radiated Interference Measurement {译} 无线电骚扰和抗扰度测量设备和测量方法规范 - 第1-4部分：无线电骚扰和抗扰度测量设备 - 辐射骚扰测量用天线和试验场地 |
China National Standards Test, |
English PDF |
| GB/T 4937.40-2025 |
Semiconductor Devices - Mechanical and Climate Testing Methods - Part 40: Plate Drop Test Method Using Strain Gauges {译} 半导体器件 - 机械和气候试验方法 - 第40部分：采用应变仪的板级跌落试验方法 |
China National Standards Test, |
English PDF |
| GB/T 4937.39-2025 |
Semiconductor Devices - Mechanical and Climate Testing Methods - Part 39: Measurement of Moisture Diffusion and Water Solubility of Organic Materials for Semiconductor Devices {译} 半导体器件 - 机械和气候试验方法 - 第39部分：半导体器件用有机材料的潮气扩散率和水溶解度测量 |
China National Standards Test, |
English PDF |
| GB/T 4937.37-2025 |
Semiconductor Devices - Mechanical and Climate Testing Methods - Part 37: Plate Drop Test Method Using Accelerometers {译} 半导体器件 - 机械和气候试验方法 - 第37部分：采用加速度计的板级跌落试验方法 |
China National Standards Test, |
English PDF |
| GB/T 4937.10-2025 |
Semiconductor Devices - Mechanical and Climate Testing Methods - Part 10: Mechanical Shock - Devices and Components {译} 半导体器件 - 机械和气候试验方法 - 第10部分：机械冲击 - 器件和组件 |
China National Standards Test, |
English PDF |
| GB/T 4937.8-2025 |
Semiconductor Devices - Mechanical and Climate Testing Methods - Part 8: Sealing {译} 半导体器件 - 机械和气候试验方法 - 第8部分：密封 |
China National Standards Test, |
English PDF |
| GB/T 46719.6-2025 |
Aerospace - Test Methods for Hydraulic Filter Elements - Part 6: Cleanliness Rating {译} 航空航天 - 液压滤芯试验方法 - 第6部分：洁净度等级 |
China National Standards Test, |
English PDF |
| GB/T 46719.4-2025 |
Aerospace - Test Methods for Hydraulic Filter Elements - Part 4: Crush/Burst Pressure Rating Verification {译} 航空航天 - 液压滤芯试验方法 - 第4部分：压溃/破裂压力等级验证 |
China National Standards Test, |
English PDF |
| GB/T 15445.3-2025 |
Expression of Results of Particle Size Analysis - Part 3: Reference Model Fitting of Test Curves {译} 粒度分析结果的表述 - 第3部分：试验曲线的参考模型拟合 |
China National Standards Test, |
English PDF |
| GB/T 46773-2025 |
Thermal Conductivity Test Method for Ultra-Thin Ceramic Substrates - Flash Method {译} 超薄陶瓷基片导热系数试验方法 - 闪光法 |
China National Standards Test, |
English PDF |
| GB/T 29459.2-2025 |
Small Punch Test Method for In-Service Pressure Equipment Metallic Materials - Part 2: Tensile Properties at Room Temperature {译} 在役承压设备金属材料小冲杆试验方法 - 第2部分：室温下拉伸性能试验方法 |
China National Standards Test, |
English PDF |
| GB/T 29459.1-2025 |
Small Punch Test Method for In-Service Pressure Equipment Metallic Materials - Part 1: General Rules {译} 在役承压设备金属材料小冲杆试验方法 - 第1部分：总则 |
China National Standards Test, |
English PDF |
| GB/T 46780-2025 |
Road Vehicles - Friction Materials for Brake Linings - Test Method for Metal Inlay in Disc Brake Linings {译} 道路车辆 - 制动衬片摩擦材料 - 盘式制动衬片金属镶嵌试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46820-2025 |
Cybersecurity Technology - Cybersecurity Testing Platform - Architecture {译} 网络安全技术 - 网络安全试验平台 - 体系架构 |
China National Standards Test, |
English PDF |
| GB/T 46544-2025 |
Test Methods for Lateral Vibration Anti-Loosening of Bolted Joints in Aerospace Applications {译} 航空航天用螺栓连接横向振动防松试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46551-2025 |
Test Methods for Aerospace Solid Rivets {译} 航空航天用实心铆钉试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46552-2025 |
Test Methods for Aerospace Bolts {译} 航空航天用螺栓试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46779-2025 |
Advanced Ceramics - Test Methods for Low-Magnification Microstructural Defects {译} 精细陶瓷 - 微观结构中的低倍组织缺陷测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46762-2025 |
Corrosion Test Method for Protective Coatings on Rare Earth Permanent Magnets {译} 稀土永磁体防护层腐蚀试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46778-2025 |
Fine Ceramics - Test Method for Compressive Strength of Ceramic Granules {译} 精细陶瓷 - 陶瓷造粒粉压缩强度试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46787-2025 |
Self-Propelled Forestry Machinery - Operator Protection Structures (OPS) - Laboratory Tests and Performance Requirements {译} 自行式林业机械 - 驾驶员保护结构（OPS）实验室试验和性能要求 |
China National Standards Test, |
English PDF |
| GB/T 46774-2025 |
Metallic Materials - Test Method for Dynamic Fracture Toughness at High Strain Rates {译} 金属材料 - 高应变速率动态断裂韧度试验方法 |
China National Standards Test, |
English PDF |
| GB/T 12347-2025 |
Steel Wire Ropes - Fatigue Test Methods {译} 钢丝绳 - 疲劳试验方法 |
China National Standards Test, |
English PDF |
| GB/T 6683.2-2025 |
Petroleum and Related Products - Measurement Methods and Precision of Results - Part 2: Interpretation and Application of Precision Data for Test Methods {译} 石油及相关产品 - 测量方法与结果精密度 - 第2部分：试验方法精密度数据的解释和应用 |
China National Standards Test, |
English PDF |
| GB/T 46782-2025 |
Metals and Other Inorganic Coatings - Simultaneous Testing Method for Thickness and Interlayer Potential Differences of Multiple Nickel Plated Layers (STEP Test) {译} 金属及其他无机覆盖层 - 多层镍电镀层中各镍镀层厚度和层间电位差同步测试方法（STEP测试） |
China National Standards Test, |
English PDF |
| GB/T 18988.2-2025 |
Radionuclide Imaging Equipment - Performance and Test Rules - Part 2: Planar, Whole-Body, and Tomographic Imaging Gamma Cameras {译} 放射性核素成像设备 - 性能和试验规则 - 第2部分：平面、全身、断层成像伽玛照相机 |
China National Standards Test, |
English PDF |
| GB/T 46827.2-2025 |
Plastics - Methyl methacrylate-acrylonitrile-butadiene-styrene (MABS) molding and extrusion materials - Part 2: Test specimen preparation and performance determination {译} 塑料 - 甲基丙烯酸甲酯-丙烯腈-丁二烯-苯乙烯（MABS）模塑和挤出材料 - 第2部分：试样制备和性能测定 |
China National Standards Test, |
English PDF |
| GB/T 21460.2-2025 |
Plastics - Styrene-acrylonitrile (SAN) molded and extruded materials - Part 2: Test specimen preparation and performance determination {译} 塑料 - 苯乙烯-丙烯腈（SAN）模塑和挤出材料 - 第2部分：试样制备和性能测定 |
China National Standards Test, |
English PDF |
| GB/T 20417.2-2025 |
Plastics - Acrylonitrile-Butadiene-Styrene (ABS) Molding and Extrusion Materials - Part 2: Test Specimen Preparation and Performance Determination {译} 塑料 - 丙烯腈-丁二烯-苯乙烯（ABS）模塑和挤出材料 - 第2部分：试样制备和性能测定 |
China National Standards Test, |
English PDF |
| GB/T 46836-2025 |
Plastics - Reaction to fire - Test methods for flame spread and release of combustion products for vertically supported specimens {译} 塑料 - 对火反应 - 垂直方向试样的火焰蔓延和燃烧产物释放的试验方法 |
China National Standards Test, |
English PDF |
| GB/T 2406.4-2025 |
Plastics - Determination of burning behavior by the oxygen index method - Part 4: High gas flow rate test {译} 塑料 - 用氧指数法测定燃烧行为 - 第4部分：高气体流速试验 |
China National Standards Test, |
English PDF |
| GB/T 46833-2025 |
Plastics - Burning tests - Standard ignition sources {译} 塑料 - 燃烧试验 - 标准点火源 |
China National Standards Test, |
English PDF |
| GB/T 46835-2025 |
Plastics - Sliding Friction and Wear - Determination of Test Parameters {译} 塑料 - 滑动摩擦和磨损 - 试验参数的确定 |
China National Standards Test, |
English PDF |
| GB/T 31405-2025 |
Test Method for High-Temperature Cathodic Delamination of Pipeline Anti-Corrosion Coatings {译} 管道防腐层高温阴极剥离试验方法 |
China National Standards Test, |
English PDF |
| GB/T 19936.3-2025 |
Gears - FZG Test Procedure - Part 3: Relative Bonding Load Capacity and Wear Characteristics of Semi-Fluid Gear Greases - FZG Test Method A/2.8/50 {译} 齿轮 - FZG试验程序 - 第3部分：半流体齿轮润滑脂的相对胶合承载能力和磨损特性FZG试验方法A/2.8/50 |
China National Standards Test, |
English PDF |
| GB/T 19042.7-2025 |
Evaluation and Routine Tests for Medical Imaging Departments - Part 3-7: Acceptance and Stability Tests for Imaging Performance of Oral and Maxillofacial Cone Beam Computed Tomography X-ray Equipment {译} 医用成像部门的评价及例行试验 - 第3-7部分：口腔颌面锥形束计算机体层摄影X射线设备成像性能验收和稳定性试验 |
China National Standards Test, |
English PDF |
| GB/T 30921.5-2025 |
Test Methods for Industrial-Grade Purified Terephthalic Acid (PTA) - Part 5: Determination of Acid Value {译} 工业用精对苯二甲酸（PTA）试验方法 - 第5部分：酸值的测定 |
China National Standards Test, |
English PDF |
| GB/T 30921.6-2025 |
Test Methods for Industrial-Grade Purified Terephthalic Acid (PTA) - Part 6: Determination of Particle Size Distribution {译} 工业用精对苯二甲酸（PTA）试验方法 - 第6部分：粒度分布的测定 |
China National Standards Test, |
English PDF |
| GB/T 17770-2025 |
Containers - Air/Land/Sea (Intermodal) Universal Containers - Technical Requirements and Test Methods {译} 集装箱 - 空/陆/水（联运）通用集装箱 - 技术要求和试验方法 |
China National Standards Test, |
English PDF |
| GB/T 20136-2025 |
General Test Methods for Internal Combustion Engine Power Plants {译} 内燃机电站通用试验方法 |
China National Standards Test, |
English PDF |
| GB/T 14233.2-2025 |
Test Methods for Medical Infusion, Transfusion, and Injection Devices - Part 2: Biological Test Methods {译} 医用输液、输血、注射器具检验方法 - 第2部分：生物学试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46777-2025 |
Metallic Materials - Pin (Hole) Extrusion Test Method {译} 金属材料 - 销型（孔）挤压试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46789-2025 |
Semiconductor Devices - Movable Ion Test for Metal Oxide Semiconductor Field Effect Transistors (MOSFETs) {译} 半导体器件 - 金属氧化物半导体场效应晶体管（MOSFETs）的可动离子试验 |
China National Standards Test, |
English PDF |
| GB/T 4937.44-2025 |
Semiconductor Devices - Mechanical and Climatic Test Methods - Part 44: Test Method for Single-Event Effects (SEE) in Semiconductor Devices after Neutron Irradiation {译} 半导体器件 - 机械和气候试验方法 - 第44部分：半导体器件的中子辐照单粒子效应（SEE）试验方法 |
China National Standards Test, |
English PDF |
| GB/T 4937.38-2025 |
Semiconductor Devices - Methods of Mechanical and Climatic Testing - Part 38: Soft Errors Test Method for Semiconductor Devices with Memory {译} 半导体器件 - 机械和气候试验方法 - 第38部分：带存储的半导体器件的软错误试验方法 |
China National Standards Test, |
English PDF |
| GB/T 4937.29-2025 |
Semiconductor Devices - Methods of Mechanical and Climatic Testing - Part 29: Latch-up Test {译} 半导体器件 - 机械和气候试验方法 - 第29部分：闩锁试验 |
China National Standards Test, |
English PDF |
| GB/T 4937.36-2025 |
Semiconductor Devices - Mechanical and Climatic Test Methods - Part 36: Steady-State Acceleration {译} 半导体器件 - 机械和气候试验方法 - 第36部分：稳态加速度 |
China National Standards Test, |
English PDF |
| GB/T 20736-2025 |
Fatigue Test Methods for Precision Roller Chains and Plate Chains for Transmission {译} 传动用精密滚子链和板式链疲劳试验方法 |
China National Standards Test, |
English PDF |
| GB/T 4937.33-2025 |
Semiconductor Devices - Mechanical and Climatic Test Methods - Part 33: Accelerated Humidity Resistance - No-Bias High-Pressure Autoclaving {译} 半导体器件 - 机械和气候试验方法 - 第33部分：加速耐湿 - 无偏置高压蒸煮 |
China National Standards Test, |
English PDF |
| GB/T 4937.25-2025 |
Semiconductor Devices - Mechanical and Climatic Test Methods - Part 25: Temperature Cycling {译} 半导体器件 - 机械和气候试验方法 - 第25部分：温度循环 |
China National Standards Test, |
English PDF |
| GB/T 4937.24-2025 |
Semiconductor Devices - Mechanical and Climatic Test Methods - Part 24: Accelerated Humidity Resistance - No-Bias High Acceleration Stress Test {译} 半导体器件 - 机械和气候试验方法 - 第24部分：加速耐湿 - 无偏置强加速应力试验 |
China National Standards Test, |
English PDF |
| GB/T 46775-2025 |
Petroleum and Natural Gas Industry - Pipeline Transportation Systems - Test Procedures for Threaded Connections {译} 石油天然气工业 - 管道输送系统 - 螺纹连接件试验程序 |
China National Standards Test, |
English PDF |
| GB/T 46554-2025 |
Petroleum and Natural Gas Industry - Pipeline Transportation Systems - Test Procedures for Mechanical Connectors {译} 石油天然气工业 - 管道输送系统 - 机械连接件试验程序 |
China National Standards Test, |
English PDF |
| GB/T 40855-2021 |
Information Security Technical Requirements and Test Methods for Remote Service and Management Systems of Electric Vehicles {译} 电动汽车远程服务与管理系统信息安全技术要求及试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46583-2025 |
Test Methods for Dielectric Properties of Microwave Dielectric Ceramics - Open Cavity Method, Closed Cavity Method {译} 微波介质陶瓷介电性能测试方法 - 开腔法、闭腔法 |
China National Standards Test, |
English PDF |
| GB/T 46581-2025 |
Road Vehicles - Brake Lining Friction Materials - Test Method for Particulate Emissions from Wear {译} 道路车辆 - 制动衬片摩擦材料 - 磨损颗粒物排放量测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46609-2025 |
Test Method for Neutron-Gamma Ray Detection Performance of Scintillation Crystals {译} 闪烁晶体的中子-伽马射线探测性能测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46661-2025 |
Method for Testing Magnetic Bead Performance in Cell Sorting {译} 细胞分选用磁珠性能检测方法 |
China National Standards Test, |
English PDF |
| GB/T 46728-2025 |
Test Method for Lint and Impurities in Natural-Colored Cotton Fabric {译} 本色布棉结杂质检验方法 |
China National Standards Test, |
English PDF |
| GB/T 46735.3-2025 |
High-Temperature Batteries - Part 3: Sodium-Based Batteries - Performance Requirements and Tests {译} 高温蓄电池 - 第3部分：钠基蓄电池 - 性能要求和试验 |
China National Standards Test, |
English PDF |
| GB/T 46603-2025 |
Enamels and Glazes - Determination of Crack Formation Temperature in Thermal Shock Tests {译} 搪瓷制品和瓷釉 - 热冲击试验中裂纹形成温度的测定 |
China National Standards Test, |
English PDF |
| GB/T 46602-2025 |
Enamels and Glazes - Determination of Surface Scratch Resistance by Mohs Hardness Test {译} 搪瓷制品和瓷釉 - 莫氏硬度法测定表面耐刻划硬度 |
China National Standards Test, |
English PDF |
| GB/T 46617-2025 |
Packaging Bags - Sampling Method for Empty Bags for Testing {译} 包装袋 - 试验用空袋抽样方法 |
China National Standards Test, |
English PDF |
| GB/T 46567.1-2025 |
Intelligent Computing - Memristor Test Methods - Part 1: Fundamental Characteristics {译} 智能计算 - 忆阻器测试方法 - 第1部分：基础特性 |
China National Standards Test, |
English PDF |
| GB/T 46708-2025 |
Comparative Testing of Consumer Goods and Related Services - Implementation Requirements {译} 消费品和有关服务的比较试验 - 实施要求 |
China National Standards Test, |
English PDF |
| GB/T 46620-2025 |
Child-Resistant Packaging - Mechanical Test Methods for Reusable Packaging Systems {译} 防止儿童开启包装 - 可重复开启包装系统的机械试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46463-2025 |
Access Network Equipment Test Methods - 10Gbit/s Symmetrical Passive Optical Networks (XGS-PON) {译} 接入网设备测试方法 - 10Gbit/s对称无源光网络（XGS-PON） |
China National Standards Test, |
English PDF |
| GB/T 46474-2025 |
Dual-Cycle Power Generation Systems with Capacity Less Than 100 kW - Performance Test Methods {译} 容量小于100kW的双循环发电系统 - 性能测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46635.1-2025 |
Sliding Bearings - Test Bench Using Actual Connecting Rods for Automotive Engine Bearings - Part 1: Test Bench {译} 滑动轴承 - 使用实际连杆汽车发动机轴承试验台 - 第1部分：试验台 |
China National Standards Test, |
English PDF |
| GB/T 46374-2025 |
Space Environment - Test Method for Electrostatic Discharge Induced by Solar Array Charging of Spacecraft {译} 空间环境 - 航天器太阳电池阵充电诱发静电放电试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46642-2025 |
Self-Propelled Forestry Machinery - Falling Object Protective Structures (FOPS) - Laboratory Tests and Performance Requirements {译} 自行式林业机械 - 落物保护结构(FOPS) - 实验室试验和性能要求 |
China National Standards Test, |
English PDF |
| GB/T 46648-2025 |
Power-Driven Ride-On Lawn Care Equipment - Rollover Protective Structures (ROPS) - Test Procedures and Certification Criteria {译} 动力驱动的坐骑式草坪养护设备 - 翻滚保护结构（ROPS） - 试验程序和认定准则 |
China National Standards Test, |
English PDF |
| GB/T 46470-2025 |
Leather - Colour Fastness Tests - Colour Fastness to Migration to Polymers {译} 皮革 - 色牢度试验 - 颜色迁移到聚合物上的色牢度 |
China National Standards Test, |
English PDF |
| GB/T 46471-2025 |
Leather - Colour Fastness Tests - General Test Procedures {译} 皮革 - 色牢度试验 - 试验通则 |
China National Standards Test, |
English PDF |
| GB/T 46614-2025 |
Metallic Materials - Instrumented Indentation Tests - Determination of Fracture Toughness {译} 金属材料 - 仪器化压入试验 - 断裂韧度的测定 |
China National Standards Test, |
English PDF |
| GB/T 46469-2025 |
Leather - Physical and Mechanical Tests - Determination of Tensile Strength and Elongation {译} 皮革 - 物理和机械试验 - 抗张强度和伸长率的测定 |
China National Standards Test, |
English PDF |
| GB/T 46590-2025 |
Metallic Materials - Wide Plate Tensile Testing Method {译} 金属材料 - 宽板拉伸试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46591.1-2025 |
Metallic Materials - In-Situ Testing Methods - Part 1: Tensile Testing {译} 金属材料 - 原位试验方法 - 第1部分：拉伸试验 |
China National Standards Test, |
English PDF |
| GB/T 46440-2025 |
Ultrasonic Cloud Testing of Steel Products {译} 钢产品超声云检测 |
China National Standards Test, |
English PDF |
| GB/T 46608-2025 |
Non-Destructive Testing of Steel Pipes - General Rules for Machine Vision Inspection of Surface Defects {译} 钢管无损检测 - 表面缺陷机器视觉检测技术通则 |
China National Standards Test, |
English PDF |
| GB/T 46377-2025 |
Test Methods for Mixed Liquid Crystals {译} 混合液晶测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46445.1-2025 |
Imaging Materials and Printed Matter - Abrasion Resistance - Part 1: General Friction Test Method {译} 影像材料和印刷品 - 耐磨性 - 第1部分：通用摩擦试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46444-2025 |
Test Method for High-Temperature Tensile-Tensile Fatigue Properties of Carbon Fiber Reinforced Ceramic Matrix Composites {译} 碳纤维增强陶瓷基复合材料高温拉-拉疲劳性能试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46481-2025 |
Power Testing Methods for Hybrid Electric Vehicles and Multi-Motor Pure Electric Vehicles {译} 混合动力电动汽车及多电机纯电动汽车动力系统功率测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46382-2025 |
Test Methods for Conductors for Overhead Transmission Lines {译} 架空输电线路用导线试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46601-2025 |
Thermal Spraying - Evaluation of Adhesion and Cohesion of Thermal Sprayed Ceramic Coatings Using the Lateral Scratch Test {译} 热喷涂 - 采用横向划痕试验评估热喷涂陶瓷涂层的结合力和内聚力 |
China National Standards Test, |
English PDF |
| GB/T 46584-2025 |
Advanced Ceramics - Interfaces - Test Method for Tensile and Shear Fatigue Properties at Room Temperature under Constant Amplitude - Crossed Method {译} 精细陶瓷界面 - 恒定振幅下室温拉伸和剪切疲劳性能试验方法 - 十字交叉法 |
China National Standards Test, |
English PDF |
| GB/T 46607.2-2025 |
Plastics - Preparation of Test Specimens for Thermosetting Powder Molding Compounds (PMCs) - Part 2: Small Plates {译} 塑料 - 热固性粉末模塑料（PMCs）试样的制备 - 第2部分：小板 |
China National Standards Test, |
English PDF |
| GB/T 46607.1-2025 |
Plastics - Preparation of Test Specimens for Thermosetting Powder Molding Compounds (PMCs) - Part 1: General Principles and Preparation of Multi-Purpose Specimens {译} 塑料 - 热固性粉末模塑料（PMCs）试样的制备 - 第1部分: - 一般原理及多用途试样的制备 |
China National Standards Test, |
English PDF |
| GB/T 46441-2025 |
Imaging Materials - Color Reflective Photographs - Test Method for Ozone Fading Stability {译} 影像材料 - 彩色反射照片 - 臭氧褪色稳定性的试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46383.301-2025 |
Electrical Transport Equipment - Part 3-1: Performance Test Method for Total Operating Time of Electric Scooters under Different Temperature Conditions {译} 电气运输设备 - 第3-1部分：不同温度条件下电动滑板车总运行时间的性能测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46383.302-2025 |
Electrical Transport Equipment - Part 3-2: Test Methods for Mobility Performance of Goods-Carrying Electrical Transport Equipment {译} 电气运输设备 - 第3-2部分：载物电气运输设备移动性能测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46568.2-2025 |
Reliability of Intelligent Measuring Instruments - Part 2: Methods for Accelerated Reliability Testing of Electrical Systems {译} 智能仪器仪表可靠性 - 第2部分：电气系统可靠性强化试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46568.1-2025 |
Reliability of Intelligent Measuring Instruments - Part 1: Methods for Reliability Testing and Evaluation {译} 智能仪器仪表可靠性 - 第1部分：可靠性试验与评估方法 |
China National Standards Test, |
English PDF |
| GB/T 46585-2025 |
Thermal Insulation Products for Buildings - Measurement of Linear Dimensions of Test Specimens {译} 建筑用绝热制品 - 试件线性尺寸的测量 |
China National Standards Test, |
English PDF |
| GB/T 46653-2025 |
Test Methods for Vertically Mounted Gear Transmission Devices {译} 立式安装齿轮传动装置试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46627-2025 |
Test Method for High-Temperature Sealing Performance of Gaskets for Pipe Flanges {译} 管法兰用垫片高温密封性能试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46736-2025 |
Lead-Acid Batteries for Light Vehicle Power Units - General Requirements and Test Methods {译} 轻型车辆动力车用铅酸蓄电池 - 一般要求和试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46612-2025 |
Conveyor Belts - Band-Width-Based Indentation Rolling Resistance - Technical Requirements and Test Methods {译} 输送带 - 基于带宽的压陷滚动阻力 - 技术条件和试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46490-2025 |
Biotechnology - Analytical Methods - General Requirements and Considerations for Testing and Characterization of Cell Therapy Products {译} 生物技术 - 分析方法 - 细胞治疗产品的试验和表征的一般要求和考虑 |
China National Standards Test, |
English PDF |
| GB/T 46629-2025 |
Liquid-Liquid Separation Equipment - Energy Efficiency Testing Method {译} 液液分离设备 - 能效检测方法 |
China National Standards Test, |
English PDF |
| GB/T 46542-2025 |
Textiles - Test Method for Reflective Properties {译} 纺织品 - 反光性能试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46539-2025 |
Geosynthetics - Test Method for Resistance to Ultraviolet Aging - Fluorescent Ultraviolet Lamp Method {译} 土工合成材料 - 抗紫外老化性能试验 - 荧光紫外灯法 |
China National Standards Test, |
English PDF |
| GB/T 46428.1-2025 |
Metallic Materials - Plate and Rod Micro-Specimens - Part 1: Fatigue Test Methods {译} 金属材料 - 板状、棒状微型试样 - 第1部分：疲劳试验方法 |
China National Standards Test, |
English PDF |
| GB/T 46592-2025 |
Metallic Materials - Mechanical Testing of Micro-Specimens - Sampling and Specimen Preparation Methods {译} 金属材料 - 微试样力学试验 - 取样和试样制备方法 |
China National Standards Test, |
English PDF |
| GB/T 46385.2-2025 |
Optical Interconnects - Part 2: Basic Tests and Measurement Procedures - Guidelines for Optical Characteristic Measurement Conditions {译} 光路板 - 第2部分：基本试验和测量程序 - 光学特性测量条件导则 |
China National Standards Test, |
English PDF |
| GB/T 46717-2025 |
Semiconductor Devices - Metallization Cavity Stress Test {译} 半导体器件 - 金属化空洞应力试验 |
China National Standards Test, |
English PDF |
| GB/T 46385.24-2025 |
Optical Interconnects - Part 2-4: Basic Tests and Measurement Procedures - Optical Transmission Test for Interconnects Without Input/Output Pigtails {译} 光路板 - 第2-4部分：基本试验和测量程序 - 不带输入/输出尾纤光路板的光传输试验 |
China National Standards Test, |
English PDF |
| GB/T 46385.22-2025 |
Optical Interconnects - Part 2-2: Basic Tests and Measurement Procedures - Dimensional Measurement {译} 光路板 - 第2-2部分：基本试验和测量程序 - 尺寸测量 |
China National Standards Test, |
English PDF |
| GB/T 46385.21-2025 |
Optical Waveguide Plates - Part 2-1: Basic Tests and Measurement Procedures - Measurement of Optical Attenuation and Isolation {译} 光路板 - 第2-1部分：基本试验和测量程序 - 光衰减与隔离度测量 |
China National Standards Test, |
English PDF |
| GB/T 46587-2025 |
Test Methods for Air Purification Performance of Photocatalytic Materials and Products - Removal of Methyl Mercaptan {译} 光催化材料及制品空气净化性能测试方法 - 甲硫醇的去除 |
China National Standards Test, |
English PDF |
| GB/T 46580-2025 |
Test Method for Air Purification Performance of Photocatalytic Materials and Products - Removal of Formaldehyde {译} 光催化材料及制品空气净化性能测试方法 - 甲醛的去除 |
China National Standards Test, |
English PDF |
| GB/T 46370-2025 |
Performance Requirements and Test Methods for Beidou Directional Receiving Terminals {译} 北斗定向型接收终端性能要求及测试方法 |
China National Standards Test, |
English PDF |
| GB/T 46368-2025 |
Performance Requirements and Test Methods for Beidou Satellite Navigation System Surveying Antennas {译} 北斗卫星导航系统测量型天线性能要求及测试方法 |
China National Standards Test, |
English PDF |
| GB/T 3871.15-2025 |
Agricultural Tractors - Test Procedures - Part 15: Center of Gravity {译} 农业拖拉机 - 试验规程 - 第15部分：质心 |
China National Standards Test, |
English PDF |
| GB/T 14847-2025 |
Testing the Thickness of Lightly Doped Silicon Epitaxial Layers on Heavily Doped Substrates - Infrared Reflectance Method {译} 重掺杂衬底上轻掺杂硅外延层厚度的测试 - 红外反射法 |
China National Standards Test, |
English PDF |
| GB/T 8452-2025 |
Glass bottles and jars - Test method for vertical axis deviation {译} 玻璃瓶罐 - 垂直轴偏差试验方法 |
China National Standards Test, |
English PDF |
| GB/T 18182-2025 |
Acoustic Emission Testing and Evaluation of Results for Metal Pressure Vessels {译} 金属压力容器声发射检测及结果评价方法 |
China National Standards Test, |
English PDF |
| GB/T 15903-2025 |
Test Method for Flame Resistance of Pressure-Sensitive Adhesive Tapes {译} 压敏胶粘带耐燃性试验方法 |
China National Standards Test, |
English PDF |
| GB/T 6552-2025 |
Glass containers - Test method for resistance to mechanical impact {译} 玻璃容器 - 抗机械冲击试验方法 |
China National Standards Test, |
English PDF |
| GB/T 19387-2025 |
Portable chainsaws - Performance Test method for saw chain brakes {译} 便携式链锯 - 锯链制动器性能试验方法 |
China National Standards Test, |
English PDF |
| GB/T 20448.1-2025 |
Self-Propelled Forestry Machinery - Rollover Protective Structures (ROPS) Laboratory Tests and Performance Requirements - Part 1: General Machinery {译} 自行式林业机械 - 翻滚保护结构（ROPS）实验室试验和性能要求 - 第1部分：通用机械 |
China National Standards Test, |
English PDF |
| GB/T 21838.5-2025 |
Metallic Materials - Instrumented Indentation Tests for Hardness and Material Parameters - Part 5: Dynamically Instrumented Indentation Test (DIIT) for Linear Elasticity {译} 金属材料 - 硬度和材料参数的仪器化压入试验 - 第5部分：线弹性动态仪器化压入试验（DIIT） |
China National Standards Test, |
English PDF |
| GB/T 21143-2025 |
Metallic Materials - Unified Test Method for Quasi-Static Fracture Toughness {译} 金属材料 - 准静态断裂韧度的统一试验方法 |
China National Standards Test, |
English PDF |
| GB/T 37946.1-2025 |
Test Methods for Organic Luminescent Materials - Part 1: Optical Testing {译} 有机发光材料测试方法 - 第1部分：光学测试 |
China National Standards Test, |
English PDF |
| GB/T 31967.4-2025 |
Test Methods for Physical Properties of Rare Earth Permanent Magnet Materials - Part 4: Compressive Strength Testing {译} 稀土永磁材料物理性能测试方法 - 第4部分：抗压强度的测试 |
China National Standards Test, |
English PDF |
| GB/T 43432.1-2025 |
Metallic materials - Barcol hardness Test - Part 1: Test method {译} 金属材料 - 巴氏硬度试验 - 第1部分：试验方法 |
China National Standards Test, |
English PDF |
| GB/T 17394.1-2025 |
Metallic Materials - Rockwell Hardness Testing - Part 1: Test Methods {译} 金属材料 - 里氏硬度试验 - 第1部分：试验方法 |
China National Standards Test, |
English PDF |
| GB/T 17626.9-2025 |
Electromagnetic Compatibility - Testing and Measurement Techniques - Part 9: Pulse Magnetic Field Immunity Test {译} 电磁兼容 - 试验和测量技术 - 第9部分：脉冲磁场抗扰度试验 |
China National Standards Test, |
English PDF |
| GB/T 2423.101-2025 |
Environmental Testing - Part 2: Test Methods - Test: Tilting and Oscillation {译} 环境试验 - 第2部分：试验方法 - 试验：倾斜和摇摆 |
China National Standards Test, |
English PDF |
| GB/T 16462.5-2025 |
Inspection Conditions for CNC Lathes and Turning Centers - Part 5: Speed and Interpolation Accuracy Tests {译} 数控车床和车削中心检验条件 - 第5部分：速度和插补精度检验 |
China National Standards Test, |
English PDF |
| GB/T 29459.3-2025 |
Small-Punch Test Methods for Metallic Materials in Service Pressure Equipment - Part 3: Fracture Toughness Test Methods {译} 在役承压设备金属材料小冲杆试验方法 - 第3部分：断裂韧度试验方法 |
China National Standards Test, |
English PDF |
| GB/T 26953-2025 |
Weld Non-Destructive Testing - Penetrant Testing - Acceptance Levels {译} 焊缝无损检测 - 渗透检测 - 验收等级 |
China National Standards Test, |
English PDF |
| GB/T 26952-2025 |
Weld Non-Destructive Testing - Magnetic Particle Testing - Acceptance Levels {译} 焊缝无损检测 - 磁粉检测 - 验收等级 |
China National Standards Test, |
English PDF |
| GB/T 26951-2025 |
Weld Non-Destructive Testing - Magnetic Particle Testing {译} 焊缝无损检测 - 磁粉检测 |
China National Standards Test, |
English PDF |
| GB/T 5503-2025 |
Grain and Oil Inspection - Method for Testing Broken Rice {译} 粮油检验 - 碎米检验法 |
China National Standards Test, |
English PDF |
| GB/T 18988.1-2025 |
Radionuclide Imaging Equipment - Performance and Test Rules - Part 1: Positron Emission Tomography (PET) Scanners {译} 放射性核素成像设备 - 性能和试验规则 - 第1部分：正电子发射断层成像装置 |
China National Standards Test, |
English PDF |
| GB/T 14096-2025 |
Fuel Injection Pump Test Bench - Test Methods {译} 喷油泵试验台 - 试验方法 |
China National Standards Test, |
English PDF |
| GB/T 33206-2025 |
Test Methods for Performance of Automotive Multi-V-Belt {译} 汽车多楔带性能试验方法 |
China National Standards Test, |
English PDF |
| GB/T 21719-2025 |
Grain and Oil Inspection - Test Method for Whole and Polished Rice Yield {译} 粮油检验 - 稻谷整精米率检验 |
China National Standards Test, |
English PDF |
| GB/T 5499-2025 |
Grain and Oil Inspection - Test Method for Purity of Shelled Oilseeds {译} 粮油检验 - 带壳油料纯仁率检验法 |
China National Standards Test, |
English PDF |
| GB/T 5536-2025 |
Testing of Vegetable Oils and Fats - Determination of Melting Point {译} 植物油脂检验 - 熔点测定法 |
China National Standards Test, |
English PDF |
| GB/T 19412-2025 |
Testing and Evaluation Methods for Thermal Storage Air Conditioning Systems {译} 蓄冷（热）空调系统的测试和评价方法 |
China National Standards Test, |
English PDF |
| GB/T 20013.3-2025 |
Nuclear Medicine Instruments - Routine Tests - Part 3: Positron Emission Tomography Devices {译} 核医学仪器-例行试验-第3部分：正电子发射断层成像装置 |
China National Standards Test, |
English PDF |
| GB/T 3871.9-2025 |
Agricultural Tractors - Test Procedures - Part 9: Tractive Power Test {译} 农业拖拉机 - 试验规程 - 第9部分：牵引功率试验 |
China National Standards Test, |
English PDF |
| GB/T 3871.7-2025 |
Agricultural Tractors - Test Procedures - Part 7: Forward Field of Vision for the Driver {译} 农业拖拉机 - 试验规程 - 第7部分：驾驶员前视野 |
China National Standards Test, |
English PDF |
| GB/T 18325.1-2025 |
Plain bearings - Bearing fatigue - Part 1: Test bench and practical application of plain bearings under fluid dynamic lubrication conditions {译} 滑动轴承 - 轴承疲劳 - 第1部分：流体动压润滑条件下试验台和实际应用的滑动轴承 |
China National Standards Test, |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
