Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 23262-2023 |
Test methods for non-metallic sealing packings {译} 非金属密封填料试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 43118-2023 |
Corrosion of metals and alloys Test method for high-temperature corrosion of metallic materials under the action of deposits of salt, ash or other substances {译} 金属和合金的腐蚀 金属材料在盐、灰烬或其他物质的沉积物作用下进行高温腐蚀的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 43115-2023 |
Metallic materials - Sheet and strip - Room temperature shear test methods {译} 金属材料 薄板和薄带 室温剪切试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 42913-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials embedded in salt, ash or other solids {译} 金属和合金的腐蚀 金属材料嵌入在盐、灰烬或其他固体中的高温腐蚀试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 42912-2023 |
Corrosion of metals and alloys Test methods for high-temperature corrosion of metallic materials under static immersion in molten salts or other liquids {译} 金属和合金的腐蚀 金属材料在静态浸入熔盐或其他液体条件下的高温腐蚀试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 42900-2023 |
High strain rate and high temperature compression test method for metallic materials {译} 金属材料 高应变速率高温压缩试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 5482-2023 |
Metallic materials - Dynamic tear test method {译} 金属材料 动态撕裂试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 28896-2023 |
Metallic materials - Test method for the determination of quasi-static fracture toughness of welded joints {译} 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 239.2-2023 |
Metallic materials - wire rods - Part 2: Test methods for bidirectional torsion {译} 金属材料 线材 第2部分:双向扭转试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 239.1-2023 |
Metallic materials - wire rods - Part 1: Test method for unidirectional torsion {译} 金属材料 线材 第1部分:单向扭转试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 42352-2023 |
Metallic coatings - Physical vapor deposition of cadmium coatings on iron and steel - Specifications and test methods {译} 金属覆盖层 钢铁上物理气相沉积镉涂层 技术规范与试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 26957-2022 |
Destructive testing of welds in metallic materials - Tensile test methods for cross joints and lap joints {译} 金属材料焊缝破坏性试验 十字接头和搭接接头拉伸试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20568-2022 |
Metallic materials - Hydraulic test method for pipe rings {译} 金属材料 管环液压试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 40410-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled method 金属材料 多轴疲劳试验 轴向-扭转应变控制方法 |
China National Standards Test method metallic |
English PDF |
GB/T 3075-2021 |
Metallic materials—Fatigue testing—Axial force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards Test method metallic |
English PDF |
GB/T 40072-2021 |
Strength test method for submersible metallic framework 潜水器金属框架强度试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 26077-2021 |
Metallic materials—Fatigue testing—Axial-strain-controlled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards Test method metallic |
English PDF |
GB/T 41120-2021 |
Non-destructive testing -- Test method for non-ferromagnetic metallic component pulsed eddy current testing 无损检测 非铁磁性金属材料脉冲涡流检测 |
China National Standards Test method metallic |
English PDF |
GB/T 41154-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled thermo-mechanical fatigue testing method 金属材料 多轴疲劳试验 轴向-扭转应变控制热机械疲劳试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 228.1-2021 |
Metallic materials—Tensile testing—Part 1: Method of test at room temperature 金属材料 拉伸试验 第1部分:室温试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 31723.414-2021 |
Metallic communication cable test methods—Part 4-14: Electromagnetic compatibility (EMC)—Coupling attenuation of cable assemblies (field conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-14部分:电磁兼容 电缆组件(现场条件)的耦合衰减 吸收钳法 |
China National Standards Test method metallic |
English PDF |
GB/T 31723.413-2021 |
Metallic communication cable test methods—Part 4-13: Electromagnetic compatibility (EMC)—Coupling attenuation of links and channels(laboratory conditions)—Absorbing clamp method 金属通信电缆试验方法 第4-13部分:电磁兼容 链路和信道(实验室条件)的耦合衰减 吸收钳法 |
China National Standards Test method metallic |
English PDF |
GB/T 31723.412-2021 |
Metallic communication cable test methods—Part 4-12: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of connecting hardware—Absorbing clamp method 金属通信电缆试验方法 第4-12部分:电磁兼容 连接硬件的耦合衰减或屏蔽衰减 吸收钳法 |
China National Standards Test method metallic |
English PDF |
GB/T 229-2020 |
Metallic materials—Charpy pendulum impact test method 金属材料 夏比摆锤冲击试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.3-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分:垫片材料耐液性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.5-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 5: Standard test method for creep relaxation of gasket materials 非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松弛率试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.6-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分:垫片材料与金属表面黏附性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 13912-2020 |
Metallic coatings—Hot dip galvanized coatings on fabricated iron and steel articles—Specifications and test methods 金属覆盖层 钢铁制件热浸镀锌层 技术要求及试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 38822-2020 |
Metallic materials—Creep-fatigue test method 金属材料 蠕变-疲劳试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 38806-2020 |
Metallic materials—Sheet and strip—Test method for bending and folding properties 金属材料 薄板和薄带 弯折性能试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 38804-2020 |
Test method for oxidation of metallic materials exposed in high-temperature steam 金属材料高温蒸汽氧化试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 24522-2020 |
Metallic materials—Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳态裂纹扩展阻力的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 244-2020 |
Metallic material—Tube—Bend test method 金属材料 管 弯曲试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.1-2020 |
Classification system and test methods for nonmetallic gasket materials—Part 1:Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分:非金属垫片材料分类体系 |
China National Standards Test method metallic |
English PDF |
GB/T 21838.4-2020 |
Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压入试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 24523-2020 |
Metallic materials—Test method for rapid indentation (Brinell type) hardness testing 金属材料 快速压入(布氏型)硬度试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 38430-2019 |
Corrosion of metals and alloys—Test method for isothermal-exposure oxidation testing under high-temperature corrosion conditions for metallic materials 金属和合金的腐蚀 金属材料在高温腐蚀条件下的等温暴露氧化试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 37783-2019 |
Metallic materials—High strain rate tensile test method at elevated temperature 金属材料 高应变速率高温拉伸试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 21838.1-2019 |
Metallic materials—Instrumented indentation test for hardness and materials parameters—Part 1:Test method 金属材料 硬度和材料参数的仪器化压入试验 第1部分:试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 19748-2019 |
Metallic materials—Charpy V-notch pendulum impact test—Instrumented test method 金属材料 夏比V型缺口摆锤冲击试验 仪器化试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 228.4-2019 |
Metallic materials—Tensile testing—Part 4: Method of test in liquid helium 金属材料 拉伸试验 第4部分:液氦试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 228.3-2019 |
Metallic materials—Tensile testing—Part 3: Method of test at low temperature 金属材料 拉伸试验 第3部分:低温试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 37598-2019 |
Inspection of non-metallic inclusions in steel—Blue fracture test method 钢中非金属夹杂物的检验 发蓝断口法 |
China National Standards Test method metallic |
English PDF |
GB/T 37306.2-2019 |
Metallic materials—Fatigue testing—Variable amplitude fatiguetesting—Part 2: Cycle counting and related data reduction methods 金属材料 疲劳试验 变幅疲劳试验 第2部分:循环计数和相关数据缩减方法 |
China National Standards Test method metallic |
English PDF |
GB/T 37306.1-2019 |
Metallic materials—Fatigue testing—Variable amplitude fatigue testing—Part 1: General principles, test method and reporting requirements 金属材料 疲劳试验 变幅疲劳试验 第1部分:总则、试验方法和报告要求 |
China National Standards Test method metallic |
English PDF |
GB/T 230.1-2018 |
Metallic materials—Rockwell hardness test—Part 1:Test method 金属材料 洛氏硬度试验 第1部分: 试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 231.1-2018 |
Metallic materials—Brinell hardness test—Part 1: Test method 金属材料 布氏硬度试验 第1部分: 试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 34542.2-2018 |
Storage and transportation systems for gaseous hydrogen—Part 2: Test methods for evaluating metallic material compatibility in hydrogen atmosphere 氢气储存输送系统 第2部分:金属材料与氢环境相容性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 34542.3-2018 |
Storage and transportation systems for gaseous hydrogen—Part 3: Test method for determination of the susceptibility of metallic materials to hydrogen gas embrittlement (HGE) 氢气储存输送系统 第3部分:金属材料氢脆敏感度试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 15711-2018 |
Inspection of non-metallic inclusions of steel—Etching test method of tower samples 钢中非金属夹杂物的检验 塔形发纹酸浸法 |
China National Standards Test method metallic |
English PDF |
GB/T 31723.411-2018 |
Metallic communication cable test methods—Part 4-11: Electromagnetic compatibility (EMC)—Coupling attenuation or screening attenuation of patch cords,coaxial cable assemblies,pre-connectorized cables—Absorbing clamp method 金属通信电缆试验方法 第4-11部分:电磁兼容 跳线、同轴电缆组件、接连接器电缆的耦合衰减或屏蔽衰减 吸收钳法 |
China National Standards Test method metallic |
English PDF |
GB/T 36024-2018 |
Metallic materials—Sheet and strip—Biaxial tensile testing method using a cruciform test piece 金属材料 薄板和薄带 十字形试样双向拉伸试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 34477-2017 |
Metallic materials—Sheet and strip—Dent resistance test method 金属材料 薄板和薄带 抗凹性能试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 34625-2017 |
Metallic and other inorganic coatings—Electrodeposited gold and gold alloy coatings for electrical, electronic and engineering purposes—Specification and test methods 金属及其他无机覆盖层 电气、电子和工程用金和金合金电镀层 技术规范和试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 34205-2017 |
Metallic materials—Hardness testing—Ultrasonic contact impedance method 金属材料 硬度试验 超声接触阻抗法 |
China National Standards Test method metallic |
English PDF |
GB/T 34108-2017 |
Metallic materials—High strain rate compression test method at ambient temperature 金属材料 高应变速率室温压缩试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 6398-2017 |
Metallic materials—Fatigue testing—Fatigue crack growth method 金属材料 疲劳试验 疲劳裂纹扩展方法 |
China National Standards Test method metallic |
English PDF |
GB/T 33812-2017 |
Metallic material—Fatigue testing—Strain-controlled thermomechanical fatigue testing method 金属材料 疲劳试验 应变控制热机械疲劳试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 7314-2017 |
Metallic materials—Compression test method at room temperature 金属材料 室温压缩试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 32967.1-2016 |
Metallic materials—Torsional test method at high strain rates—Part 1: Method of test at room temperature 金属材料 高应变速率扭转试验 第1部分:室温试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 32660.1-2016 |
Metallic materials—Webster hardness test—Part 1: Test method 金属材料 韦氏硬度试验 第1部分:试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20236-2015 |
Accelerated outdoor weathering test methods for nonmetallic materials using concentrated natural sunlight 非金属材料的聚光加速户外暴露试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 4337-2015 |
Metallic materials—Fatigue testing—Rotating bar bending method 金属材料 疲劳试验 旋转弯曲方法 |
China National Standards Test method metallic |
English PDF |
GB/T 228.2-2015 |
Metallic materials—Tensile testing—Part 2: Method of test at elevated temperature 金属材料 拉伸试验 第2部分:高温试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 31854-2015 |
Test method for measuring metallic impurities content in silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry 光伏电池用硅材料中金属杂质含量的电感耦合等离子体质谱测量方法 |
China National Standards Test method metallic |
English PDF |
GB/T 31723.406-2015 |
Metallic communication cable test methods—Part 4-6: Electromagnetic compatibility (EMC)—Surface transfer impedance—Line injection method 金属通信电缆试验方法 第4-6部分:电磁兼容 表面转移阻抗 线注入法 |
China National Standards Test method metallic |
English PDF |
GB/T 31723.405-2015 |
Metallic communication cable test methods—Part 4-5: Electromagnetic compatibility (EMC)—Coupling or screening attenuation—Absorbing clamp method 金属通信电缆试验方法 第4-5部分:电磁兼容 耦合或屏蔽衰减 吸收钳法 |
China National Standards Test method metallic |
English PDF |
GB/T 31566-2015 |
Metallic coatings—Physical vapour-deposited coatings of aluminium—Specification and test methods 金属覆盖层 物理气相沉积铝涂层 技术规范与检测方法 |
China National Standards Test method metallic |
English PDF |
GB/T 21143-2014 |
Metallic materials―Unified method of test for determination of quasistatic fracture toughness 金属材料 准静态断裂韧度的统一试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 17394.1-2014 |
Metallic materials―Leeb hardness test―Part 1: Test method 金属材料 里氏硬度试验 第1部分:试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 4372.6-2014 |
Methods for chemical analysis of zincoxide produced by direct process―Part 6:Testing of metallic zinc 直接法氧化锌化学分析方法 第6部分:金属锌的检验 |
China National Standards Test method metallic |
English PDF |
GB/T 4341.1-2014 |
Metallic materials—Shore hardness test—Part 1: Test method 金属材料 肖氏硬度试验 第1部分:试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 15748-2013 |
The method of galvanic corrosion test for metallic ship materials 船用金属材料电偶腐蚀试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 29849-2013 |
Test method for measuring surface metallic contamination of silicon materials used for photovoltaic applications by inductively coupled plasma mass spectrometry 光伏电池用硅材料表面金属杂质含量的电感耦合等离子体质谱测量方法 |
China National Standards Test method metallic |
English PDF |
GB/T 10120-2013 |
Metallic materials - Tensile stress relaxation - Method of test 金属材料 拉伸应力松弛试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 29459.2-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 2:Method of test for tensile properties at room temperature 在役承压设备金属材料小冲杆试验方法 第2部分:室温下拉伸性能的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 29459.1-2012 |
Small punch test methods of metallic materials for in-service pressure equipments - Part 1:General requirements 在役承压设备金属材料小冲杆试验方法 第1部分:总则 |
China National Standards Test method metallic |
English PDF |
GB/T 28896-2012 |
Metallic Materials - Method of test for the determination of quasistatic fracture toughness of welds 金属材料 焊接接头准静态断裂韧度测定的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 2039-2012 |
Metallic materials - Uniaxial creep testing method in tension 金属材料 单轴拉伸蠕变试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 27970-2011 |
Test method for weight loss of non-metallic gasket materials upon exposure to elevated temperatures 非金属垫片材料烧失量试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 27795-2011 |
Test method for corrosion testing of non-metallic gaskets 非金属垫片腐蚀性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 26642-2011 |
Non-destructive testing - Test method for computed radiography of metallic materials 无损检测 金属材料计算机射线照相检测方法 |
China National Standards Test method metallic |
English PDF |
GB/T 26107-2010 |
Metallic and other inorganic coatings - Test for residual embrittlement in both metallic-coated and uncoated externally-threaded articles and rods - Inclined wedge method 金属与其他无机覆盖层 镀覆和未镀覆金属的外螺纹和螺杆的残余氢脆试验 斜楔法 |
China National Standards Test method metallic |
English PDF |
GB/T 26077-2010 |
Metallic materials - Fatigue testing - Axial-strain-controlled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards Test method metallic |
English PDF |
GB/T 228.1-2010 |
Metallic materials - Tensile testing - Part 1 : Method of test at room temperature 金属材料 拉伸试验 第1部分:室温试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 24523-2009 |
Test method for rapid indentation (Brinell) hardness testing of metallic materials 金属材料快速压痕(布氏)硬度试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 24522-2009 |
Metallic materials - Method of test for the determination of resistance to stable crack extension using specimens of low constraint 金属材料 低拘束试样测定稳定裂纹扩展阻力的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 24584-2009 |
Metallic materials - Tensile testing - Method of test in liquid helium 金属材料 拉伸试验 液氦试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 4340.1-2009 |
Metallic materials - Vickers hardness test - Part 1: Test method 金属材料 维氏硬度试验 第1部分:试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 231.1-2009 |
Metallic materials - Brinell hardness test - Part 1: Test method 金属材料 布氏硬度试验 第1部分:试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 230.1-2009 |
Metallic materials - Rockwell hardness test - Part 1: Test method(scales A、B、C、D、E、F、G、H、K、N、T) 金属材料 洛氏硬度试验 第1部分:试验方法(A、B、C、D、E、F、G、H、K、N、T标尺) |
China National Standards Test method metallic |
English PDF |
GB/T 18449.1-2009 |
Metallic materials - Knoop hardness test - Part 1: Test method 金属材料 努氏硬度试验 第1部分:试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 23262-2009 |
Test method for nonmetallic sealing packings 非金属密封填料试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 4339-2008 |
Test methods for thermal expansion characteristic parameters of metallic materials 金属材料热膨胀特征参数的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 4337-2008 |
Metallic materials - Fatigue testing - Rotating bar bending method 金属材料 疲劳试验 旋转弯曲方法 |
China National Standards Test method metallic |
English PDF |
GB/T 3075-2008 |
Metallic materials - Fatigue testing - Axial-force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards Test method metallic |
English PDF |
GB/T 6384-2008 |
The testing methods for seawater corrosion in natural environment of metallic materials for ship and offshore structures 船舶及海洋工程用金属材料在天然环境中的海水腐蚀试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 22218-2008 |
Ships and marine technology - Fire resistance of metallic pipe components with resilient and elastomeric seals - Test methods 船舶与海上技术 配有弹性密封件的金属管路附件耐火性能 试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 13913-2008 |
Metallic coatings - Autocatalytic (Electroless) nickel-phosphorus alloy coatings - Specification and test methods 金属覆盖层 化学镀镍-磷合金镀层 规范和试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 3903.19-2008 |
Footwear - Test methods for accessories:Metallic accessories - Corrosion resistance 鞋类 金属附件试验方法 耐腐蚀性 |
China National Standards Test method metallic |
English PDF |
GB/T 13813-2008 |
Testing method and judging rule of safety to friction spark of metallic material for coal mine 煤矿用金属材料摩擦火花安全性试验方法和判定规则 |
China National Standards Test method metallic |
English PDF |
GB/T 7732-2008 |
Metallic materials - Fracture toughness testing method with surface crack tension specimens 金属材料 表面裂纹拉伸试样断裂韧度试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 21838.4-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 4: Test method for metallic and non-metallic coatings 金属材料 硬度和材料参数的仪器化压痕试验 第4部分:金属和非金属覆盖层的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 21838.1-2008 |
Metallic materials - Instrumented indentation test for hardness and materials parameters - Part 1: Test method 金属材料 硬度和材料参数的仪器化压痕试验 第1部分:试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 12605-2008 |
Non-destructive testing - Test methods for radiographic testing of circumferential fusion-welded butt joints in metallic pipes and tubes 无损检测 金属管道熔化焊环向对接接头射线照相检测方法 |
China National Standards Test method metallic |
English PDF |
GB/T 15248-2008 |
The test method for axial loading constant-amplitude low-cycle fatigue of metallic materials 金属材料轴向等幅低循环疲劳试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 3048.2-2007 |
Test methods for electrical properties of electric cables and wires - Part 2:Test of electrical resistivity of metallic materials 电线电缆电性能试验方法 第2部分:金属材料电阻率试验 |
China National Standards Test method metallic |
English PDF |
GB/T 229-2007 |
Metallic materials - Charpy pendulum impact test method 金属材料 夏比摆锤冲击试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 12443-2007 |
Metallic materials - Torsional stress fatigue testing method 金属材料 扭应力疲劳试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 6400-2007 |
Metallic materials - Shear test method for wires and rivets 金属材料 线材和铆钉剪切试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 5482-2007 |
Test method of metallic materials - Dynamic tear 金属材料动态撕裂试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 13665-2007 |
Test method for damping capacity of metallic damping materials - Torsion pendulum method and Bending vibration 金属阻尼材料阻尼本领试验方法 扭摆法和弯曲振动法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.9-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 9: Standard test method for binder durability of cork composition gasket materials 非金属垫片材料分类体系及试验方法 第9部分: 软木垫片材料胶结物耐久性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.8-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 8: Standard test method for flexibility of non-metallic gasket materials 非金属垫片材料分类体系及试验方法 第8部分: 非金属垫片材料柔软性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.7-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 7: Standard test methods for tension testing of nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第7部分: 非金属垫片材料拉伸强度试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.6-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 6: Standard test method for adhesion of gasket materials to metal surfaces 非金属垫片材料分类体系及试验方法 第6部分: 垫片材料与金属表面粘附性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.5-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 5: Standard test method for creep relaxtion of gasket materials 非金属垫片材料分类体系及试验方法 第5部分:垫片材料蠕变松驰率试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.4-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 4: Standard test method for sealability of gasket materials 非金属垫片材料分类体系及试验方法 第4部分:垫片材料密封性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.3-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 3: Standard test method for fluid resistance of gasket materials 非金属垫片材料分类体系及试验方法 第3部分: 垫片材料耐液性试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.2-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 2: Standard test method for compressibility and recovery of gasket materials 非金属垫片材料分类体系及试验方法 第2部分: 垫片材料压缩率回弹率试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.1-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 1: Standard classification system for nonmetallic gasket materials 非金属垫片材料分类体系及试验方法 第1部分: 非金属垫片材料分类体系 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.11-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 11: Standard practice for determining resistance of synthetic polymeric materials to fungi 非金属垫片材料分类体系及试验方法 第11部分: 合成聚合材料抗霉性测定方法 |
China National Standards Test method metallic |
English PDF |
GB/T 20671.10-2006 |
Classification system and test methods for nonmetallic gasket materials - Part 10: Standard practice for evaluating thermal conductivity of gasket materials 非金属垫片材料分类体系及试验方法 第10部分: 垫片材料导热系数测定方法 |
China National Standards Test method metallic |
English PDF |
GB/T 12444-2006 |
Metallic materials - Wear test method - Block-on-ring sliding wear test 金属材料 磨损试验方法 试环-试块滑动磨损试验 |
China National Standards Test method metallic |
English PDF |
GB/T 19816.7-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 19816.6-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 11020-2005 |
Flammability of solid non-metallic meterials when exposed to flame sources-List of test methods 固体非金属材料暴露在火焰源时的燃烧性试验方法清单 |
China National Standards Test method metallic |
English PDF |
GB/T 5270-2005 |
Metallic coatings on metallic substrates-Electrodeposited and chemically deposited coatings-Review of methods available for testing adhesion 金属基体上的金属覆盖层 电沉积和化学沉积层 附着强度试验方法评述 |
China National Standards Test method metallic |
English PDF |
GB/T 19816.4-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 19816.3-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 19816.2-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 19816.1-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 |
China National Standards Test method metallic |
English PDF |
GB/T 6461-2002 |
Methodsfor corrosion testing of metallic and other inorganic coatings on metallic substrates--Rating of test specimens and manufactured articles subjected to corrosion tests 金属基体上金属和其他无机覆盖层 经腐蚀试验后的试样和试件的评级 |
China National Standards Test method metallic |
English PDF |
GB/T 12599-2002 |
Metallic coatings--Electroplated coatings of tin--Specification and test methods 金属覆盖层 锡电镀层 技术规范和试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 13912-2002 |
Metallic coatings--Hot dip galvanized coatings on fabricated iron and steel articles--Specifications and test methods 金属覆盖层 钢铁制件热浸镀锌层技术要求及试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 6398-2000 |
Standard test method for fatigue crack growth rates of metallic materials 金属材料疲劳裂纹扩展速率试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 4067-1999 |
Testing method for electrical resistance-temperature characteristic parameters of metallic materials 金属材料电阻温度特征参数的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 17849-1999 |
Preparation of steel substrates before application of paints and related products--Test methodsfor non-metallic blast-cleaning abrasives 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的试验方法 |
China National Standards Test method metallic |
English PDF |
GB/T 12307.3-1997 |
Metalliccoatings--Test methods for electrodeposited silver and silver alloy coatings--Part 3:Determination of the presence of residual salts 金属覆盖层 银和银合金电镀层的试验方法 第三部分:残留盐的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 12305.6-1997 |
Metalliccoating--Test methods for electrodeposited gold and gold alloy coatings--Part 6:Determination of the presence of residual salts 金属覆盖层 金和金合金电镀层的试验方法 第六部分:残留盐的测定 |
China National Standards Test method metallic |
English PDF |
GB/T 16745-1997 |
Standard test method for solderability of metallic-coated products 金属覆盖层产品钎焊性的标准试验方法 |
China National Standards Test method metallic |
English PDF |
Find out:142Items | To Page of: First -Previous-Next -Last | 1 |