Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 13790-2025 |
Cold-rolled Low-Carbon Steel Sheet and Strip for Enameling {译} 搪瓷用冷轧低碳钢板及钢带 |
China National Standards roll |
 English PDF |
| GB/T 713.8-2025 |
Steel Plates and Strips for Pressure Equipment - Part 8: Homogeneous and Heterogeneous rolled Composite Steel Plates {译} 承压设备用钢板和钢带-第8部分：同质和异质轧制复合钢板 |
China National Standards roll |
English PDF |
| GB 16808-2025 |
Combustible Gas Alarm Controllers {译} 可燃气体报警控制器 |
China National Standards roll |
English PDF |
| GB/T 34200-2025 |
Cold-rolled stainless steel plate and strip for building roofs and curtain walls {译} 建筑屋面和幕墙用冷轧不锈钢钢板和钢带 |
China National Standards roll |
English PDF |
| GB/T 9945-2025 |
Hot-rolled flat steel bulbs {译} 热轧球扁钢 |
China National Standards roll |
English PDF |
| GB/T 45682-2025 |
High-Pressure roller Mill Selection Test Method for Mining {译} 矿用高压辊磨机选型试验方法 |
China National Standards roll |
English PDF |
| GB/T 32197-2025 |
Open Communication Interface Specification for Industrial Robot Controllers {译} 工业机器人控制器开放式通信接口规范 |
China National Standards roll |
English PDF |
| GB/T 36066-2025 |
Cleanrooms and Related Controlled Environments - Testing Technology Requirements and Applications {译} 洁净室及相关受控环境-检测技术要求与应用 |
China National Standards roll |
English PDF |
| GB/T 19277.1-2025 |
Determination of the Ultimate Aerobic Biodegradability of Materials Under Controlled Composting Conditions - Method Using the Measurement of Released Carbon Dioxide - Part 1: General Method {译} 受控堆肥条件下材料最终需氧生物分解能力的测定-采用测定释放的二氧化碳的方法-第1部分：通用方法 |
China National Standards roll |
English PDF |
| GB/T 45648.2-2025 |
Technical Specifications for Energy Dissipators for HVDC Transmission - Part 2: AC Controllable Self-Restoring Energy Dissipators {译} 高压直流输电用消能装置技术规范-第2部分：交流可控自恢复消能装置 |
China National Standards roll |
English PDF |
| GB/T 45648.1-2025 |
Technical Specifications for Energy Dissipators for HVDC Transmission - Part 1: DC Controllable Self-Restoring Energy Dissipators {译} 高压直流输电用消能装置技术规范-第1部分：直流可控自恢复消能装置 |
China National Standards roll |
English PDF |
| GB/T 45602-2025 |
Ships and Offshore Technology - Adjustable roller Blade Chain Stoppers {译} 船舶与海洋技术-可调式滚轮闸刀掣链器 |
China National Standards roll |
English PDF |
| GB/T 36217-2025 |
Ships and Offshore Technology - Ship Mooring and Towing Equipment - roller Fairleads {译} 船舶与海上技术-船舶系泊和拖带设备-带上滚柱导缆器 |
China National Standards roll |
English PDF |
| GB/T 33555-2025 |
Technical Requirements for Static Electricity Control in Cleanrooms and Related Controlled Environments {译} 洁净室及相关受控环境-静电控制技术要求 |
China National Standards roll |
English PDF |
| GB/T 21307-2025 |
roller Cotton Ginning Machine {译} 皮辊轧花机 |
China National Standards roll |
English PDF |
| GB/T 45308-2025 |
Rail Transit - rolling Stock - Technical Requirements for Network Time Synchronization {译} 轨道交通-机车车辆-网络时间同步技术要求 |
China National Standards roll |
English PDF |
| GB/T 45306-2025 |
Rail Transit - Onboard Energy Storage and Power Supply for rolling Stock - Series Hybrid Power Systems {译} 轨道交通-机车车辆车载储能供电-串联混合动力系统 |
China National Standards roll |
English PDF |
| GB/T 44991-2025 |
Rail Transit - Test Methods for rolling Stock Before Production and Commissioning {译} 轨道交通-机车车辆制成后投入使用前的试验方法 |
China National Standards roll |
English PDF |
| GB/T 28807.3-2025 |
Rail Transit - Compatibility of rolling Stock and Train Detection Systems - Part 3: Compatibility with Detection Systems Compatibility of shafts {译} 轨道交通-机车车辆和列车检测系统的兼容性-第3部分：与计轴器的兼容性 |
China National Standards roll |
English PDF |
| GB/T 45022-2024 |
Railway transportation-Volume conversion equipment for locomotives and rolling stock-Chargers {译} 轨道交通-机车车辆变流设备-充电机 |
China National Standards roll |
English PDF |
| GB/T 33223-2024 |
rolling equipment-Terminology {译} 轧制设备-术语 |
China National Standards roll |
English PDF |
| GB/T 44386-2024 |
Railway transportation - rolling stock - On-board traction lithium-ion battery {译} 轨道交通-机车车辆-车载牵引锂离子电池 |
China National Standards roll |
English PDF |
| GB/T 34571-2024 |
Railway transportation - Wiring rules for rolling stock {译} 轨道交通-机车车辆布线规则 |
China National Standards roll |
English PDF |
| GB/T 45147-2024 |
Road vehicles - Test of air brake system of vehicles with a total mass greater than 3.5t - Obtaining and using reference values using a roller brake test bench {译} 道路车辆-总质量大于3.5t的车辆气制动系统试验-使用滚筒制动试验台获取和使用参考值 |
China National Standards roll |
English PDF |
| GB/T 26846-2024 |
Lead wires and connectors for electric bicycle motors and controllers {译} 电动自行车用电动机和控制器的引出线及接插件 |
China National Standards roll |
English PDF |
| GB/T 45023-2024 |
Automation systems and integration-CAN bus controller test methods {译} 自动化系统与集成-CAN总线控制器测试方法 |
China National Standards roll |
English PDF |
| GB/T 24055.1-2024 |
Environmental management-Guidelines for establishing good practices for preventing and controlling land degradation and desertification-Part 1: Framework for good practices {译} 环境管理-建立防治土地退化和荒漠化良好实践指南-第1部分：良好实践框架 |
China National Standards roll |
English PDF |
| GB/T 15969.2-2024 |
Programmable controller-Part 2:-Equipment requirements and tests {译} 可编程序控制器-第2部分:-设备要求和测试 |
China National Standards roll |
English PDF |
| GB/T 14536.12-2024 |
Electric automatic controllers-Part 12: Special requirements for energy regulators {译} 电自动控制器-第12部分：能量调节器的特殊要求 |
China National Standards roll |
English PDF |
| GB/T 14536.7-2024 |
Electric automatic controllers-Part 7: Special requirements for pressure-sensitive electric automatic controllers, including mechanical requirements {译} 电自动控制器-第7部分：压力敏感电自动控制器的特殊要求，包括机械要求 |
China National Standards roll |
English PDF |
| GB/T 44794-2024 |
Electric automatic controllers for household and similar purposes - Technical requirements and evaluation methods for microwave sensing functions {译} 家用和类似用途电自动控制器-微波传感功能的技术要求和评价方法 |
China National Standards roll |
English PDF |
| GB/T 44751-2024 |
Fine ceramics-Silicon nitride materials for rolling bearing balls and rollers {译} 精细陶瓷-滚动轴承球及滚子用氮化硅材料 |
China National Standards roll |
English PDF |
| GB/T 11263-2024 |
Hot-rolled H-shaped steel and split T-shaped steel {译} 热轧H型钢和剖分T型钢 |
China National Standards roll |
English PDF |
| GB/T 29468-2024 |
Clean rooms and related controlled environments - Sandwich panels for enclosure structures {译} 洁净室及相关受控环境-围护结构夹芯板 |
China National Standards roll |
English PDF |
| GB/T 5132.3-2024 |
Industrial rigid circular laminated tubes and rods of thermosetting resins for electrical use - Part 3: Circular laminated rolled tubes {译} 电气用热固性树脂工业硬质圆形层压管和棒-第3部分：圆形层压卷制管 |
China National Standards roll |
English PDF |
| GB/T 25764-2024 |
rolling bearings - For automotive gearboxes Roller bearings {译} 滚动轴承-汽车变速箱用滚子轴承 |
China National Standards roll |
English PDF |
| GB/T 25763-2024 |
rolling bearings - Needle roller bearings for automotive gearboxes {译} 滚动轴承-汽车变速箱用滚针轴承 |
China National Standards roll |
English PDF |
| GB/T 43617.4-2024 |
rolling bearings - Test for noise from rolling bearing grease - Part 4: Test and evaluation method NQ {译} 滚动轴承-滚动轴承润滑脂噪声测试-第4部分：测试和评估方法NQ |
China National Standards roll |
English PDF |
| GB/T 43617.3-2024 |
rolling bearings - Test for noise from rolling bearing grease - Part 3: Test and evaluation method MQ {译} 滚动轴承-滚动轴承润滑脂噪声测试-第3部分：测试和评估方法MQ |
China National Standards roll |
English PDF |
| GB/T 25770-2024 |
rolling bearings - Railway freight car bearings {译} 滚动轴承-铁路货车轴承 |
China National Standards roll |
English PDF |
| GB/T 25915.17-2024 |
Clean rooms and related controlled environments - Part 17: Application of particle deposition rate {译} 洁净室及相关受控环境-第17部分：粒子沉积速率应用 |
China National Standards roll |
English PDF |
| GB/T 29469-2024 |
Clean rooms and related controlled environments - Performance and rationality evaluation {译} 洁净室及相关受控环境-性能及合理性评价 |
China National Standards roll |
English PDF |
| GB/T 44424-2024 |
Walking trolleys-Requirements and test methods {译} 助行手推车-要求和测试方法 |
China National Standards roll |
English PDF |
| GB/T 6930-2024 |
rolling bearings - Vocabulary {译} 滚动轴承-词汇 |
China National Standards roll |
English PDF |
| GB/T 44232-2024 |
Technical specifications for battery charge and discharge controllers for stand-alone photovoltaic systems {译} 独立光伏系统用蓄电池充放电控制器技术规范 |
China National Standards roll |
English PDF |
| GB/T 44148.3-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 3: Low temperature toughness nickel steel {译} 承压设备用钢锻件、轧制或锻制钢棒-第3部分:低温韧性镍钢 |
China National Standards roll |
English PDF |
| GB/T 44148.2-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 2: Low alloy and alloy (molybdenum, chromium and chromium-molybdenum) steels with specified high temperature properties {译} 承压设备用钢锻件、轧制或锻制钢棒-第2部分：规定高温性能的低合金及合金（钼、铬和铬钼）钢 |
China National Standards roll |
English PDF |
| GB/T 44148.1-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 1: General requirements {译} 承压设备用钢锻件、轧制或锻制钢棒-第1部分：一般要求 |
China National Standards roll |
English PDF |
| GB-13788-2024 |
Cold-rolled ribbed steel bars {译} 冷轧带肋钢筋 |
China National Standards roll |
English PDF |
| GB-1499.2-2024 |
Steel for reinforced concrete-Part 2: Hot-rolled ribbed steel bars {译} 钢筋混凝土用钢-第2部分：热轧带肋钢筋 |
China National Standards roll |
English PDF |
| GB-1499.1-2024 |
Steel for reinforced concrete-Part 1: Hot-rolled plain round steel bars {译} 钢筋混凝土用钢-第1部分：热轧光圆钢筋 |
China National Standards roll |
English PDF |
| GB/T 44051-2024 |
Non-destructive testing of welds-Phase-controlled array ultrasonic testing of thin-walled steel components-Acceptance levels {译} 焊缝无损检测-薄壁钢构件相控阵超声检测-验收等级 |
China National Standards roll |
English PDF |
| GB/T 44128-2024 |
Road vehicles - Braking start pressure of pneumatic brake systems of heavy commercial trains - roller brake test bench measurement method {译} 道路车辆-重型商用列车气压制动系统制动开始压力-滚筒制动试验台测量方法 |
China National Standards roll |
English PDF |
| GB/T 44126.2-2024 |
Road vehicles - roller brake test bench test method for brake systems of vehicles with a maximum allowable total mass of more than 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems {译} 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 |
China National Standards roll |
English PDF |
| GB/T 12668.7202-2024 |
Speed-controlled electric drive systems - Part 7-202: General interface and use specifications for electric drive systems - Type 2 specification description {译} 调速电气传动系统-第7-202部分：电气传动系统的通用接口和使用规范-2型规范说明 |
China National Standards roll |
English PDF |
| GB/T 1243-2024 |
Short pitch precision roller chains, bushing chains, accessories and sprockets for transmission {译} 传动用短节距精密滚子链、套筒链、附件和链轮 |
China National Standards roll |
English PDF |
| GB-4717-2024 |
Fire alarm controllers {译} 火灾报警控制器 |
China National Standards roll |
English PDF |
| GB-14102.2-2024 |
Fire shutters - Part 2: rolling door machines for fire shutters {译} 防火卷帘-第2部分：防火卷帘用卷门机 |
China National Standards roll |
English PDF |
| GB-14102.3-2024 |
Fire shutters - Part 3: Fire shutter controllers {译} 防火卷帘-第3部分：防火卷帘控制器 |
China National Standards roll |
English PDF |
| GB/T 1503-2024 |
Cast steel rollers {译} 铸钢轧辊 |
China National Standards roll |
English PDF |
| GB/T 21956.1-2024 |
Agricultural and forestry tractors - rollover protection devices for narrow-track wheeled tractors - Part 1: Front-mounted {译} 农林拖拉机-窄轮距轮式拖拉机翻滚防护装置-第1部分：前置式 |
China National Standards roll |
English PDF |
| GB/T 21956.2-2024 |
Agricultural and forestry tractors - rollover protection devices for narrow-track wheeled tractors - Part 2: Rear-mounted {译} 农林拖拉机-窄轮距轮式拖拉机翻滚防护装置-第2部分：后置式 |
China National Standards roll |
English PDF |
| GB/T 32285-2024 |
Hot-rolled H-beam piles {译} 热轧H型钢桩 |
China National Standards roll |
English PDF |
| GB/T 43893-2024 |
Hot-rolled steel for prefabricated steel structure buildings {译} 装配式钢结构建筑用热轧型钢 |
China National Standards roll |
English PDF |
| GB/T 43947-2024 |
General technical requirements for low-speed wire-controlled chassis {译} 低速线控底盘通用技术要求 |
China National Standards roll |
English PDF |
| GB/T 43964-2024 |
Home Technical requirements for over-the-air download (OTA) of electric automatic controllers for use with and similar purposes {译} 家用和类似用途电自动控制器空中下载（OTA）技术要求 |
China National Standards roll |
English PDF |
| GB/T 43969-2024 |
General safety technical requirements for intelligent voice controllers {译} 智能语音控制器通用安全技术要求 |
China National Standards roll |
English PDF |
| GB/T 36306-2024 |
Clean rooms and related controlled environments - Technical requirements for control of chemical pollution in air {译} 洁净室及相关受控环境-空气化学污染控制技术要求 |
China National Standards roll |
English PDF |
| GB/T 43657.2-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 2: Self-propelled vehicles, tractors and carriers controlled by operators {译} 工业车辆能效-试验方法-第2部分：操作者控制的自行式车辆、牵引车和载运车 |
China National Standards roll |
English PDF |
| GB/T 30782-2024 |
Food processing equipment - Electric equipment - Dough roller {译} 饮食加工设备-电动设备-面团辊轧机 |
China National Standards roll |
English PDF |
| GB/T 43617.2-2024 |
rolling bearings-Noise test of rolling bearing grease-Part 2: Test and evaluation method BQ+ {译} 滚动轴承-滚动轴承润滑脂噪声测试-第2部分：测试和评估方法BQ+ |
China National Standards roll |
English PDF |
| GB/T 43617.1-2024 |
rolling bearings-Noise test of rolling bearing grease-Part 1: Basic principles, test components and testers {译} 滚动轴承-滚动轴承润滑脂噪声测试-第1部分：基本原则、测试组件和测试仪 |
China National Standards roll |
English PDF |
| GB/T 25915.16-2024 |
Clean rooms and related controlled environments-Part 16: Improving the energy efficiency of clean rooms and air purification devices {译} 洁净室及相关受控环境-第16部分：提升洁净室和空气净化装置的能效 |
China National Standards roll |
English PDF |
| GB/T 43685-2024 |
General technical requirements for inflatable membrane structure cabins and controlled environments {译} 充气膜结构舱室及受控环境通用技术要求 |
China National Standards roll |
English PDF |
| GB/T 25915.3-2024 |
Clean rooms and related controlled environments-Part 3: Detection methods {译} 洁净室及相关受控环境-第3部分：检测方法 |
China National Standards roll |
English PDF |
| GB/T 43727-2024 |
Thyristor valves for thyristor controlled series capacitors (TCSC)-Electrical test {译} 晶闸管控制串联电容器（TCSC）用晶闸管阀-电气试验 |
China National Standards roll |
English PDF |
| GB/T 11047.3-2024 |
Textiles-Detection and evaluation of fabric snagging properties-Part 3: Needle cloth roller method {译} 纺织品-织物勾丝性能的检测和评价-第3部分：针布滚筒法 |
China National Standards roll |
English PDF |
| GB/T 43665-2024 |
Hot-rolled rare earth steel bars for reinforced concrete {译} 钢筋混凝土用热轧稀土钢筋 |
China National Standards roll |
English PDF |
| GB/T 43666-2024 |
Computer program controller for household and similar refrigeration appliances {译} 金属和合金的腐蚀-电化学噪声测量腐蚀试验导则 |
China National Standards roll |
English PDF |
| GB/T 43778-2024 |
Cast iron rollers {译} 细胞培养液中苯乙烯、2-氯乙醇的测定-气相色谱-质谱（GC-MS）法 |
China National Standards roll |
English PDF |
| GB/T 43619-2023 |
Overpressure protection safety device Controlled safety pressure relief system {译} 超压保护安全装置 受控安全泄压系统 |
China National Standards roll |
English PDF |
| GB/T 43459-2023 |
Technical specifications for cell culture operations in clean rooms and controlled environments {译} 洁净室及受控环境中细胞培养操作技术规范 |
China National Standards roll |
English PDF |
| GB/T 32151.14-2023 |
Carbon emission accounting and reporting requirements Part 14: Other non-ferrous metal smelting and rolling processing enterprises {译} 碳排放核算与报告要求 第14部分：其他有色金属冶炼和压延加工企业 |
China National Standards roll |
English PDF |
| GB/T 25022.3-2023 |
Rail transit rolling stock electrical connectors Part 3: Communication control connectors {译} 轨道交通 机车车辆电连接器 第3部分：通信控制连接器 |
China National Standards roll |
English PDF |
| GB/T 24609-2023 |
rolling bearing rated thermal speed calculation method {译} 滚动轴承 额定热转速 计算方法 |
China National Standards roll |
English PDF |
| GB/T 24608-2023 |
Inspection rules for rolling bearings and their commercial parts {译} 滚动轴承及其商品零件检验规则 |
China National Standards roll |
English PDF |
| GB/T 24607-2023 |
rolling bearing life reliability test and evaluation method {译} 滚动轴承 寿命可靠性试验及评定方法 |
China National Standards roll |
English PDF |
| GB/T 292-2023 |
rolling bearings Angular contact ball bearings Dimensions {译} 滚动轴承 角接触球轴承 外形尺寸 |
China National Standards roll |
English PDF |
| GB 24544-2023 |
Fall protection speed difference automatic controller {译} 坠落防护 速差自控器 |
China National Standards roll |
English PDF |
| GB 8109-2023 |
Trolley mounted fire extinguisher {译} 推车式灭火器 |
China National Standards roll |
English PDF |
| GB/T 34575-2023 |
Rail transit rolling stock converter equipment locomotives and EMU auxiliary converters {译} 轨道交通 机车车辆变流设备 机车、动车组辅助变流器 |
China National Standards roll |
English PDF |
| GB/T 25120-2023 |
Rail transit rolling stock traction transformers and reactors {译} 轨道交通 机车车辆牵引变压器和电抗器 |
China National Standards roll |
English PDF |
| GB/T 21413.5-2023 |
Rail transit - Electrical equipment for rolling stock - Part 5: Electrical devices - High voltage fuse rules {译} 轨道交通 机车车辆电气设备 第5部分：电工器件 高压熔断器规则 |
China National Standards roll |
English PDF |
| GB/T 21413.4-2023 |
Rail transit - Electrical equipment for rolling stock - Part 4: Electrical components - Rules for AC circuit breakers {译} 轨道交通 机车车辆电气设备 第4部分：电工器件 交流断路器规则 |
China National Standards roll |
English PDF |
| GB/T 21413.3-2023 |
Rail transit - Electrical equipment for rolling stock - Part 3: Electrical devices - Rules for DC circuit breakers {译} 轨道交通 机车车辆电气设备 第3部分：电工器件 直流断路器规则 |
China National Standards roll |
English PDF |
| GB/T 3195-2023 |
Aluminum and aluminum alloy drawn (rolled) round wire rods {译} 铝及铝合金拉（轧）制圆线材 |
China National Standards roll |
English PDF |
| GB/T 43342-2023 |
Safety requirements for automatic controllers of household and similar electrical appliances with remote operation functions {译} 带有远程操作功能的家用和类似用途电器自动控制器的安全要求 |
China National Standards roll |
English PDF |
| GB/T 43229-2023 |
Communication protocol between traffic signal controller and vehicle detector {译} 交通信号控制机与车辆检测器间通信协议 |
China National Standards roll |
English PDF |
| GB/T 43061-2023 |
Semiconductor integrated circuit PWM controller test method {译} 半导体集成电路 PWM控制器测试方法 |
China National Standards roll |
English PDF |
| GB/T 3279-2023 |
Spring steel hot rolled steel plates and strips {译} 弹簧钢热轧钢板和钢带 |
China National Standards roll |
English PDF |
| GB/T 3278-2023 |
Hot rolled steel plates and strips for tools {译} 工具用热轧钢板和钢带 |
China National Standards roll |
English PDF |
| GB/T 25368-2023 |
Diesel engine electronically controlled common rail system high-pressure fuel supply pump assembly {译} 柴油机电控共轨系统 高压供油泵总成 |
China National Standards roll |
English PDF |
| GB/T 42678-2023 |
Hot rolled steel for oil and gas engineering {译} 石油天然气工程用热轧型钢 |
China National Standards roll |
English PDF |
| GB/T 34215-2023 |
Cold-rolled non-oriented electrical steel strip (sheet) for electric vehicle drive motor {译} 电动汽车驱动电机用冷轧无取向电工钢带（片） |
China National Standards roll |
English PDF |
| GB/T 20564.14-2023 |
High-strength cold-rolled steel plates and strips for automobiles Part 14: Low-density steel {译} 汽车用高强度冷连轧钢板及钢带 第14部分：低密度钢 |
China National Standards roll |
English PDF |
| GB/T 20564.13-2023 |
High-strength cold-rolled steel plates and strips for automobiles Part 13: Medium manganese steel {译} 汽车用高强度冷连轧钢板及钢带 第13部分：中锰钢 |
China National Standards roll |
English PDF |
| GB/T 42826-2023 |
Radio controlled clock signal reception test method {译} 电波钟 信号接收测试方法 |
China National Standards roll |
English PDF |
| GB/T 15969.10-2023 |
Programmable Controller Part 10: XML Open Interaction Format for PLC {译} 可编程序控制器 第10部分：PLC的XML开放交互格式 |
China National Standards roll |
English PDF |
| GB/T 21559.2-2023 |
rolling bearings - Rolling bearings for linear motion - Part 2: Static load ratings {译} 滚动轴承 直线运动滚动支承 第2部分：额定静载荷 |
China National Standards roll |
English PDF |
| GB/T 21559.1-2023 |
rolling bearings - Rolling bearings for linear motion - Part 1: Dynamic load ratings and rating life {译} 滚动轴承 直线运动滚动支承 第1部分：额定动载荷和额定寿命 |
China National Standards roll |
English PDF |
| GB/T 300-2023 |
rolling bearings Four-row tapered roller bearings Dimensions {译} 滚动轴承 四列圆锥滚子轴承 外形尺寸 |
China National Standards roll |
English PDF |
| GB/T 299-2023 |
rolling bearings Double row tapered roller bearings Dimensions {译} 滚动轴承 双列圆锥滚子轴承 外形尺寸 |
China National Standards roll |
English PDF |
| GB/T 274-2023 |
rolling bearing Chamfer size Max. {译} 滚动轴承 倒角尺寸 最大值 |
China National Standards roll |
English PDF |
| GB/T 273.1-2023 |
rolling bearings - Overall scheme of dimensions - Part 1: Tapered roller bearings {译} 滚动轴承 外形尺寸总方案 第1部分：圆锥滚子轴承 |
China National Standards roll |
English PDF |
| GB/T 42539-2023 |
rolling bearings - Ceramic balls for bearings - Determination of strength (notched ball test) {译} 滚动轴承 轴承用陶瓷球 强度测定（缺口球试验） |
China National Standards roll |
English PDF |
| GB/T 42694-2023 |
Textiles - Testing and evaluation of surface wetting resistance - Contact angle and rolling angle method {译} 纺织品 表面抗润湿性能的检测和评价 接触角和滚动角法 |
China National Standards roll |
English PDF |
| GB/T 5859-2023 |
rolling bearings Thrust spherical roller bearings Dimensions {译} 滚动轴承 推力调心滚子轴承 外形尺寸 |
China National Standards roll |
English PDF |
| GB/T 42356-2023 |
Test method for rolling resistance of industrial vehicle tires {译} 工业车辆轮胎滚动阻力试验方法 |
China National Standards roll |
English PDF |
| GB/T 41655-2022 |
Nondestructive Testing Ultrasonic Testing Welding, rolling and Explosive Composite Cladding Testing Technology {译} 无损检测 超声检测 焊接、轧制和爆炸复合覆层检测技术 |
China National Standards roll |
English PDF |
| GB/T 2523-2022 |
Method for measuring surface roughness, peak number and waviness of cold-rolled metal sheet and strip {译} 冷轧金属薄板和薄带表面粗糙度、峰值数和波纹度测量方法 |
China National Standards roll |
English PDF |
| GB/T 41103-2022 |
rolling bearings - Ceramic cylindrical rollers - Dimensions, product geometric specifications (GPS) and tolerance values {译} 滚动轴承 陶瓷圆柱滚子 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards roll |
English PDF |
| GB/T 20564.6-2022 |
High-strength cold-rolled steel sheets and strips for automobiles—Part 6: Transformation-induced plasticity steels {译} 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards roll |
English PDF |
| GB/T 20564.5-2022 |
High-strength cold-rolled steel sheets and strips for automobiles - Part 5: Isotropic steels {译} 汽车用高强度冷连轧钢板及钢带 第5部分：各向同性钢 |
China National Standards roll |
English PDF |
| GB/T 20564.4-2022 |
High-strength cold-rolled steel sheets and strips for automobiles - Part 4: Low-alloy high-strength steels {译} 汽车用高强度冷连轧钢板及钢带 第4部分：低合金高强度钢 |
China National Standards roll |
English PDF |
| GB/T 41605-2022 |
Silicon nitride materials for rolling bearing balls - Test method for indentation fracture resistance at room temperature - Indentation method {译} 滚动轴承球用氮化硅材料 室温压痕断裂阻力试验方法 压痕法 |
China National Standards roll |
English PDF |
| GB/T 41588.4-2022 |
Road vehicles - Controller area network (CAN) - Part 4: Time-triggered communication {译} 道路车辆 控制器局域网（CAN） 第4部分：时间触发通信 |
China National Standards roll |
English PDF |
| GB/T 41588.3-2022 |
Road vehicles - Controller area network (CAN) - Part 3: Low-speed fault-tolerant, media-dependent interfaces {译} 道路车辆 控制器局域网（CAN） 第3部分：低速容错、媒介相关接口 |
China National Standards roll |
English PDF |
| GB/T 41588.2-2022 |
Road vehicles - Controller area network (CAN) - Part 2: High speed media access unit {译} 道路车辆 控制器局域网（CAN） 第2部分：高速媒介访问单元 |
China National Standards roll |
English PDF |
| GB/T 41588.1-2022 |
Road vehicles - Controller area network (CAN) - Part 1: Data link layer and physical signaling {译} 道路车辆 控制器局域网（CAN） 第1部分：数据链路层和物理信令 |
China National Standards roll |
English PDF |
| GB/T 21944.3-2022 |
Silicon carbide special products - Reaction sintered silicon carbide kiln furniture - Part 3: rollers {译} 碳化硅特种制品 反应烧结碳化硅窑具 第3部分：辊棒 |
China National Standards roll |
English PDF |
| GB/T 41408-2022 |
Sensory analysis methodology - General guidelines for testing consumer preferences in controlled areas {译} 感官分析 方法学 受控区域消费者喜好测试一般导则 |
China National Standards roll |
English PDF |
| GB/T 20887.5-2022 |
High strength hot rolled steel sheet and strip for automobile part 5: martensitic steel {译} 汽车用高强度热连轧钢板及钢带 第5部分:马氏体钢 |
China National Standards roll |
English PDF |
| GB/T 20887.4-2022 |
High strength hot rolled steel sheet and strip for automobile part 4: transformation induced plastic steel {译} 汽车用高强度热连轧钢板及钢带 第4部分:相变诱导塑性钢 |
China National Standards roll |
English PDF |
| GB/T 20887.3-2022 |
High strength hot rolled steel sheet and strip for automobile part 3: dual phase steel {译} 汽车用高强度热连轧钢板及钢带 第3部分：双相钢 |
China National Standards roll |
English PDF |
| GB/T 20887.2-2022 |
High strength hot rolled steel sheet and strip for automobile part 2: high reaming steel {译} 汽车用高强度热连轧钢板及钢带 第2部分：高扩孔钢 |
China National Standards roll |
English PDF |
| GB/T 20564.7-2022 |
High strength tandem cold rolled steel sheet and strip for automobile part 7: martensitic steel {译} 汽车用高强度冷连轧钢板及钢带 第7部分：马氏体钢 |
China National Standards roll |
English PDF |
| GB/T 4162-2022 |
Ultrasonic testing method for forged and rolled steel bars {译} 锻轧钢棒超声检测方法 |
China National Standards roll |
English PDF |
| GB/T 41490-2022 |
Test method for rolling contact fatigue of silicon nitride ceramics at room temperature ball plate method {译} 氮化硅陶瓷 室温下滚动接触疲劳试验方法 球板法 |
China National Standards roll |
English PDF |
| GB/T 41480-2022 |
Test method for smoke resistance of doors and rolling shutters {译} 门和卷帘的防烟性能试验方法 |
China National Standards roll |
English PDF |
| GB/T 13564-2022 |
roller opposite forces type automobile brake tester 滚筒反力式汽车制动检验台 |
China National Standards roll |
English PDF |
| GB/T 6893-2022 |
Aluminium and aluminium alloys cold drawn (rolled) tubes 铝及铝合金拉（轧）制管材 |
China National Standards roll |
English PDF |
| GB/T 25915.15-2022 |
Clean rooms and related controlled environments - Part 15: Suitability assessment of equipment and materials by concentration of gaseous chemicals {译} 洁净室及相关受控环境 第15部分： 按气态化学物浓度评定设备及材料的适用性 |
China National Standards roll |
English PDF |
| GB/T 25915.14-2022 |
Clean rooms and related controlled environments - Part 14: Assessment of equipment suitability by particle concentration {译} 洁净室及相关受控环境 第14部分：按粒子浓度评估设备适用性 |
China National Standards roll |
English PDF |
| GB/T 25915.13-2022 |
Cleanrooms and related controlled environments - Part 13: Surface cleaning to particle and chemical cleanliness requirements {译} 洁净室及相关受控环境 第13部分：达到粒子和化学洁净度要求的表面清洁 |
China National Standards roll |
English PDF |
| GB/T 42120-2022 |
Frozen Lamb rolls {译} 冻卷羊肉 |
China National Standards roll |
English PDF |
| GB/T 14536.15-2022 |
Electric automatic controllers - Part 15: Particular requirements for humidity sensitive controllers {译} 电自动控制器 第15部分：湿度敏感控制器的特殊要求 |
China National Standards roll |
English PDF |
| GB/T 14536.13-2022 |
Electric automatic controllers - Part 13: Particular requirements for electric door locks {译} 电自动控制器 第13部分：电动门锁的特殊要求 |
China National Standards roll |
English PDF |
| GB/T 14536.6-2022 |
Electric automatic controllers - Part 6: Particular requirements for electric automatic control systems for burners {译} 电自动控制器 第6部分：燃烧器电自动控制系统的特殊要求 |
China National Standards roll |
English PDF |
| GB/T 14536.3-2022 |
Electric automatic controllers - Part 3: Particular requirements for motor thermal protectors {译} 电自动控制器 第3部分：电动机热保护器的特殊要求 |
China National Standards roll |
English PDF |
| GB/T 14536.10-2022 |
Electric automatic controllers - Part 10: Particular requirements for temperature sensitive controllers {译} 电自动控制器 第10部分：温度敏感控制器的特殊要求 |
China National Standards roll |
English PDF |
| GB/T 14536.1-2022 |
Electric automatic controllers Part 1: General requirements {译} 电自动控制器 第1部分：通用要求 |
China National Standards roll |
English PDF |
| GB/T 39693.8-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 8: Determination of apparent hardness of rubber rollers by Zhao's hardness (P&J) method {译} 硫化橡胶或热塑性橡胶 硬度的测定 第8部分：赵氏硬度（P&J)法测定胶辊的表观硬度 |
China National Standards roll |
English PDF |
| GB/T 39693.7-2022 |
Vulcanized rubber or thermoplastic rubber - Determination of hardness - Part 7: Determination of the apparent hardness of rubber rollers by the Shore hardness method {译} 硫化橡胶或热塑性橡胶 硬度的测定 第7部分：邵氏硬度法测定胶辊的表观硬度 |
China National Standards roll |
English PDF |
| GB/T 42125.19-2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves {译} 测量、控制和实验室用电气设备的安全要求 第19部分：电动控制阀门执行器的特殊要求 |
China National Standards roll |
English PDF |
| GB/T 41763-2022 |
Dimensions, shapes, weights and allowable deviations of twin-roll cast-rolled hot-rolled steel sheets and strips {译} 双辊铸轧热轧薄钢板及钢带的尺寸、外形、重量及允许偏差 |
China National Standards roll |
English PDF |
| GB/T 17396-2022 |
Hot-rolled seamless steel pipes for hydraulic props {译} 液压支柱用热轧无缝钢管 |
China National Standards roll |
English PDF |
| GB/T 11047.2-2022 |
Textiles - Testing and evaluation of snagging properties of fabrics - Part 2: rolling box method {译} 纺织品 织物勾丝性能的检测和评价 第2部分：滚箱法 |
China National Standards roll |
English PDF |
| GB/T 15546-2022 |
Metallurgical roll Terminology {译} 冶金轧辊术语 |
China National Standards roll |
English PDF |
| GB/T 42049-2022 |
rolling bearings for aircraft airframes - Characteristics, dimensions, tolerances and static load ratings {译} 飞机机体用滚动轴承 特性、外形尺寸、公差和额定静负荷 |
China National Standards roll |
English PDF |
| GB/T 41747-2022 |
Structural-grade and high-strength continuous hot-dip galvanized twin-roll cast-rolled steel sheet and strip {译} 结构级和高强度连续热镀锌双辊铸轧薄钢板及钢带 |
China National Standards roll |
English PDF |
| GB/T 41746-2022 |
Commercial-grade continuous hot-dip galvanized twin-roll cast-rolled steel sheet and strip {译} 商品级连续热镀锌双辊铸轧薄钢板及钢带 |
China National Standards roll |
English PDF |
| GB/T 41749-2022 |
General requirements for surface quality of hot-rolled section steel {译} 热轧型钢表面质量一般要求 |
China National Standards roll |
English PDF |
| GB/T 40383-2021 |
Hot-rolled twin-roll cast carbon steel sheet and strip of commercial quality 商品级双辊铸轧热轧碳素钢薄钢板及钢带 |
China National Standards roll |
English PDF |
| GB/T 40430-2021 |
Road vehicles—Diagnostic communication over controller area network（DoCAN）—Dictionary 道路车辆 基于控制器局域网的诊断通信 符号集 |
China National Standards roll |
English PDF |
| GB/T 40410-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled method 金属材料 多轴疲劳试验 轴向-扭转应变控制方法 |
China National Standards roll |
English PDF |
| GB/T 40325-2021 |
Performance test for rubber sealing device of railway vehicle wheel rolling bearing 轨道车辆轮对滚动轴承橡胶密封装置性能试验 |
China National Standards roll |
English PDF |
| GB/T 40282-2021 |
Hot-rolled twin roll cast steel sheets and strips of structural quality and high strength steel 结构级和高强度双辊铸轧热轧薄钢板及钢带 |
China National Standards roll |
English PDF |
| GB/T 25915.8-2021 |
Cleanrooms and associated controlled environments—Part 8: Classification of air cleanliness by chemical concentration (ACC) 洁净室及相关受控环境 第8部分：按化学物浓度划分空气洁净度(ACC)等级 |
China National Standards roll |
English PDF |
| GB/T 25915.2-2021 |
Cleanrooms and associated controlled environments—Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration 洁净室及相关受控环境 第2部分：洁净室空气粒子浓度的监测 |
China National Standards roll |
English PDF |
| GB/T 25915.1-2021 |
Cleanrooms and associated controlled environments—Part 1: Classification of air cleanliness by particle concentration 洁净室及相关受控环境 第1部分：按粒子浓度划分空气洁净度等级 |
China National Standards roll |
English PDF |
| GB/T 25915.10-2021 |
Cleanrooms and associated controlled environments—Part 10: Classification of surface cleanliness by chemical concentration 洁净室及相关受控环境 第10部分：按化学物浓度划分表面洁净度等级 |
China National Standards roll |
English PDF |
| GB/T 22590-2021 |
Refractory castables for rolling mill reheating furnace 轧钢加热炉用耐火浇注料 |
China National Standards roll |
English PDF |
| GB/T 15969.9-2021 |
Programmable controllers—Part 9: Single-drop digital communication interface for small sensors and actuators (SDCI) 可编程序控制器 第9部分：用于小型传感器和执行器的单点数字通信接口(SDCI) |
China National Standards roll |
English PDF |
| GB/T 14172-2021 |
Bench test methods of static roll stability for motor vehicles, trailers and combination vehicles 汽车、挂车及汽车列车静侧倾稳定性台架试验方法 |
China National Standards roll |
English PDF |
| GB/T 8749-2021 |
Hot-rolled quality carbon structural steel strip 优质碳素结构钢热轧钢带 |
China National Standards roll |
English PDF |
| GB/T 3639-2021 |
Seamless cold-drawn or cold-rolled steel tubes for precision applications 冷拔或冷轧精密无缝钢管 |
China National Standards roll |
English PDF |
| GB/T 3075-2021 |
Metallic materials—Fatigue testing—Axial force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards roll |
English PDF |
| GB/T 13345-2021 |
Oil film bearing for flat rolling mill 板带轧机轧辊油膜轴承 |
China National Standards roll |
English PDF |
| GB/T 26077-2021 |
Metallic materials—Fatigue testing—Axial-strain-controlled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards roll |
English PDF |
| GB/T 39856-2021 |
Hot rolled titanium and titanium alloy seamless tubes 热轧钛及钛合金无缝管材 |
China National Standards roll |
English PDF |
| GB/T 39851.2-2021 |
Road vehicles—Diagnostic communication over Controller Area Network (DoCAN) —Part 2:Transport protocol and network layer services 道路车辆 基于控制器局域网的诊断通信 第2部分：传输层协议和网络层服务 |
China National Standards roll |
English PDF |
| GB/T 39819-2021 |
Conveyor belts—Determination of minimum transition distance on three idler rollers 输送带 三辊托辊最小过渡距离的确定 |
China National Standards roll |
English PDF |
| GB/T 17421.10-2021 |
Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools 机床检验通则 第10部分：数控机床探测系统测量性能的测定 |
China National Standards roll |
English PDF |
| GB/T 2585-2021 |
Hot-rolled steel rails for railway 铁路用热轧钢轨 |
China National Standards roll |
English PDF |
| GB/T 283-2021 |
rolling bearings—Cylindrical roller bearings—Boundary dimensions 滚动轴承 圆柱滚子轴承 外形尺寸 |
China National Standards roll |
English PDF |
| GB/T 24604-2021 |
rolling bearings－Angular contact thrust ball bearings and units for machine tool screws 滚动轴承 机床丝杠用推力角接触球轴承及单元 |
China National Standards roll |
English PDF |
| GB/T 6445-2021 |
rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 滚动轴承 滚轮滚针轴承 外形尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards roll |
English PDF |
| GB/T 309-2021 |
rolling bearings—Needle roller 滚动轴承 滚针 |
China National Standards roll |
English PDF |
| GB/T 25684.13-2021 |
Earth-moving machinery—Safety—Part 13: Requirements for rollers 土方机械 安全 第13部分：压路机的要求 |
China National Standards roll |
English PDF |
| GB/T 41154-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled thermo-mechanical fatigue testing method 金属材料 多轴疲劳试验 轴向-扭转应变控制热机械疲劳试验方法 |
China National Standards roll |
English PDF |
| GB/T 21413.2-2021 |
Railway applications—Electric equipment for rolling stock—Part 2:Electrotechnical components—General rules 轨道交通 机车车辆电气设备 第2部分：电工器件 通用规则 |
China National Standards roll |
English PDF |
| GB/T 21414-2021 |
Railway applications—rolling stock—Protective provisions against electrical hazards 轨道交通 机车车辆 电气隐患防护的规定 |
China National Standards roll |
English PDF |
| GB/T 41217-2021 |
City metro and composite pipe gallery hot-rolling channel 城市地铁与综合管廊用热轧槽道 |
China National Standards roll |
English PDF |
| GB/T 25119-2021 |
Railway applications—Electronic equipment used on rolling stock 轨道交通 机车车辆电子装置 |
China National Standards roll |
English PDF |
| GB/T 24606-2021 |
rolling bearings—Non-destructive testing—Magnetic particle testing 滚动轴承 无损检测 磁粉检测 |
China National Standards roll |
English PDF |
| GB/T 20882.4-2021 |
rolling bearings—Needle roller bearing track rollers—Boundary dimensions, geometrical product specifications (GPS) and tolerance values 淀粉糖质量要求 第4部分：果葡糖浆 |
China National Standards roll |
English PDF |
| GB 9706.224-2021 |
Medical electrical equipment—Part 2-24: Particular requirements for the basic safety and essential performance of infusion pumps and controllers 医用电气设备 第2-24部分：输液泵和输液控制器的基本安全和基本性能专用要求 |
China National Standards roll |
English PDF |
| GB/T 21969-2021 |
YGP series variable-frequency adjustable-speed three-phase induction motors for roll table application—Technical specification YGP系列辊道用变频调速三相异步电动机 技术条件 |
China National Standards roll |
English PDF |
| GB/T 40867-2021 |
Technical specifications for unified power flow controller 统一潮流控制器技术规范 |
China National Standards roll |
English PDF |
| GB/T 20096-2021 |
roller skate 轮滑鞋 |
China National Standards roll |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
