Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 2820.9-2024 |
Alternating current generator sets driven by reciprocating internal combustion engines - Part 9: Measurement and evaluation of mechanical vibrations {译} 往复式内燃机驱动的交流发电机组-第9部分：机械振动的测量和评价 |
China National Standards vibration |
 English PDF |
| GB/T 43501-2023 |
Ships and Offshore Technology - vibration measurement, evaluation and reporting guidelines for habitability of ships with specific characteristics {译} 船舶和海上技术 特定特征船舶适居性的振动测量、评价和报告准则 |
China National Standards vibration |
English PDF |
| GB/Z 41305.7-2023 |
Environmental conditions vibration and shock of electronic equipment Part 7: Transport by rotorcraft {译} 环境条件 电子设备振动和冲击 第7部分：利用旋翼飞机运输 |
China National Standards vibration |
English PDF |
| GB/Z 43036-2023 |
Rotating electrical machines - Measurement of end vibration of stator formed windings {译} 旋转电机 定子成型绕组端部振动的测量 |
China National Standards vibration |
English PDF |
| GB/T 8419-2023 |
Earthmoving Machinery Laboratory Evaluation of Driver's Seat vibration {译} 土方机械 司机座椅振动的实验室评价 |
China National Standards vibration |
English PDF |
| GB/T 7184-2023 |
Reciprocating internal combustion engine vibration assessment method {译} 往复式内燃机 振动评定方法 |
China National Standards vibration |
English PDF |
| GB/T 5170.21-2023 |
Inspection methods for environmental testing equipment Part 21: Hydraulic vibration systems for vibration (random) testing {译} 环境试验设备检验方法 第21部分：振动（随机）试验用液压式振动系统 |
China National Standards vibration |
English PDF |
| GB/T 5170.14-2023 |
Inspection methods for environmental testing equipment Part 14: Electric vibration system for vibration (sinusoidal) testing {译} 环境试验设备检验方法 第14部分：振动（正弦）试验用电动式振动系统 |
China National Standards vibration |
English PDF |
| GB/T 2423.64-2023 |
Environmental testing Part 2: Test method Test Fj: vibration Long-term history reproduction {译} 环境试验 第2部分：试验方法 试验Fj：振动 长时间历程再现 |
China National Standards vibration |
English PDF |
| GB/T 2423.56-2023 |
Environmental testing Part 2: Test methods Test Fh: Broadband random vibration and guidelines {译} 环境试验 第2部分：试验方法 试验Fh：宽带随机振动和导则 |
China National Standards vibration |
English PDF |
| GB/T 15371-2023 |
Reciprocating internal combustion engine - Evaluation method for torsional vibration of crankshaft shafting {译} 往复式内燃机 曲轴轴系扭转振动评定方法 |
China National Standards vibration |
English PDF |
| GB/T 13750-2023 |
vibration pile sinking and pulling machine safety operating procedures {译} 振动沉拔桩机 安全操作规程 |
China National Standards vibration |
English PDF |
| GB/T 33061.7-2023 |
Plastics - Determination of dynamic mechanical properties - Part 7: Non-resonant torsional vibration method {译} 塑料 动态力学性能的测定 第7部分: 非共振扭转振动法 |
China National Standards vibration |
English PDF |
| GB/T 33061.6-2023 |
Plastics - Determination of dynamic mechanical properties - Part 6: Non-resonant shear vibration method {译} 塑料 动态力学性能的测定 第6部分：非共振剪切振动法 |
China National Standards vibration |
English PDF |
| GB/T 33061.5-2023 |
Plastics - Determination of dynamic mechanical properties - Part 5: Non-resonant bending vibration method {译} 塑料 动态力学性能的测定 第5部分：非共振弯曲振动法 |
China National Standards vibration |
English PDF |
| GB/T 33061.4-2023 |
Plastics - Determination of dynamic mechanical properties - Part 4: Non-resonant tensile vibration method {译} 塑料 动态力学性能的测定 第4部分: 非共振拉伸振动法 |
China National Standards vibration |
English PDF |
| GB/T 9239.31-2023 |
Mechanical vibration - Rotor balancing - Part 31: Machine unbalance variability and unbalance sensitivity {译} 机械振动 转子平衡 第31部分： 机器不平衡易变性和不平衡灵敏度 |
China National Standards vibration |
English PDF |
| GB/T 33521.31-2023 |
Mechanical vibrations - Ground-induced structure-borne noise and ground-borne vibrations from rail systems - Part 31: Guidelines for field measurements for the assessment of human exposure in buildings {译} 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第31部分：建筑物内人体暴露评价的现场测量指南 |
China National Standards vibration |
English PDF |
| GB/T 9239.13-2023 |
Mechanical vibration - Rotor balancing - Part 13: Criteria and safety precautions for on-site balancing of large and medium-sized rotors {译} 机械振动 转子平衡 第13部分：大中型转子现场平衡的准则和安全防护 |
China National Standards vibration |
English PDF |
| GB/Z 41305.2-2022 |
Environmental conditions - vibration and shock of electronic equipment - Part 2: storage and handling of equipment {译} 环境条件 电子设备振动和冲击 第2部分：设备的贮存和搬运 |
China National Standards vibration |
English PDF |
| GB/T 41492-2022 |
Rubber spring vibration isolator for floating plate of Urban Rail Transit {译} 城市轨道交通浮置板用橡胶弹簧隔振器 |
China National Standards vibration |
English PDF |
| GB/T 28784.5-2022 |
Mechanical vibration - Measurement of vibration in ships - Part 5: Guidelines for the measurement, evaluation and reporting of vibration for the habitability of passenger and merchant ships {译} 机械振动 船舶振动测量 第5部分：客船和商船适居性振动测量、评价和报告准则 |
China National Standards vibration |
English PDF |
| GB/T 12085.22-2022 |
Optics and photonics - Environmental test methods - Part 22: Combined test of low temperature, high temperature or temperature change with impact or random vibration {译} 光学和光子学 环境试验方法 第22部分: 低温、高温或温度变化与碰撞或随机振动综合试验 |
China National Standards vibration |
English PDF |
| GB/T 9239.23-2022 |
Mechanical vibration - Rotor balancing - Part 23: Guards and other protective measures for measuring stations of balancing machines {译} 机械振动 转子平衡 第23部分:平衡机测量工位的防护罩和其他保护措施 |
China National Standards vibration |
English PDF |
| GB/T 41894.3-2022 |
Ships and Offshore Technology Determination of Shaft Power in Ship Propulsion Systems by Measuring Shaft Deformation Part 3: Elastic vibration Method {译} 船舶与海上技术 通过测量轴变形量确定船舶推进系统轴功率 第3部分：弹性振动法 |
China National Standards vibration |
English PDF |
| GB/T 41973-2022 |
Specifications for balance quality and vibration level of industrial ventilators {译} 工业通风机 平衡品质与振动等级规范 |
China National Standards vibration |
English PDF |
| GB/T 41850.8-2022 |
Mechanical vibration - Measurement and evaluation of machine vibration - Part 8: Reciprocating compressor systems {译} 机械振动 机器振动的测量和评价 第8部分:往复式压缩机系统 |
China National Standards vibration |
English PDF |
| GB/T 33521.32-2021 |
Mechanical vibration—Ground-borne noise and vibration arising from rail systems—Part 32: Measurement of dynamic properties of the ground 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第32部分：大地的动态性能测量 |
China National Standards vibration |
English PDF |
| GB/T 20485.43-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第43部分: 基于模型参数辨识的加速度计校准 |
China National Standards vibration |
English PDF |
| GB/T 20485.32-2021 |
Methods for the calibration of vibration and shock transducers—Part 32: Resonance testing—Testing the frequency and the phase response of accelerometers by means of shock excitation 振动与冲击传感器校准方法 第32部分：谐振测试 用冲击激励测试加速度计的频率和相位响应 |
China National Standards vibration |
English PDF |
| GB/T 9239.12-2021 |
Mechanical vibration—Rotor balancing—Part 12: Procedures and tolerances for rotors with flexible behaviour 机械振动 转子平衡 第12部分：具有挠性特性的转子的平衡方法与允差 |
China National Standards vibration |
English PDF |
| GB/T 18703-2021 |
Mechanical vibration and shock—Hand-arm vibration—Measurement and evaluation of the vibration transmissibility of gloves at the palm of the hand 机械振动与冲击 手传振动 手套掌部振动传递率的测量与评价 |
China National Standards vibration |
English PDF |
| GB/T 40132-2021 |
General specification of vibration motors for mobile devices 便携式电子产品用振动电机通用规范 |
China National Standards vibration |
English PDF |
| GB/T 29716.3-2021 |
Mechanical vibration and shock—Signal processing—Part 3:Methods of time-frequency analysis 机械振动与冲击 信号处理 第3部分：时频分析方法 |
China National Standards vibration |
English PDF |
| GB/T 4797.9-2021 |
Classification of environmental conditions—Environmental conditions appearing in nature—Measured shock and vibration data during storage, transportation and in-use 环境条件分类 自然环境条件 贮存、运输和使用过程中测得的冲击和振动数据 |
China National Standards vibration |
English PDF |
| GB/T 41095-2021 |
Mechanical vibration -- Methodology for selecting appropriate machinery vibration standards 机械振动? 选择适当的机器振动标准的方法 |
China National Standards vibration |
English PDF |
| GB/T 7777-2021 |
Measurement and evaluation of mechanical vibration of displacement compressors 容积式压缩机机械振动测量与评价 |
China National Standards vibration |
English PDF |
| GB/T 26548.12-2021 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 12：Die grinders 手持便携式动力工具 振动试验方法 第12部分：模具砂轮机 |
China National Standards vibration |
English PDF |
| GB/T 26548.8-2021 |
Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 8: Saws, polishing and filing machines with reciprocating action and small saws with oscillating or rotating action 手持便携式动力工具? 振动试验方法? 第8部分：往复式锯、抛光机和锉刀以及摆式或回转式锯 |
China National Standards vibration |
English PDF |
| GB/T 4857.23-2021 |
Packaging—Basic tests for transport packages—Part 23：Vertical random vibration test method 包装 运输包装件基本试验 第23部分：垂直随机振动试验方法 |
China National Standards vibration |
English PDF |
| GB/T 40819-2021 |
Aeolian vibration fatigue test method for overhead conductors and cables 架空线缆微风振动疲劳试验方法 |
China National Standards vibration |
English PDF |
| GB/T 26548.11-2021 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 11:Stone hammers 手持便携式动力工具 振动试验方法 第11部分：石锤 |
China National Standards vibration |
English PDF |
| GB/T 26548.10-2021 |
Hand-held portable power tools -- Test methods for evaluation of vibration emission -- Part 10: Percussive drills, hammers and breakers 手持便携式动力工具? 振动试验方法? 第10部分：冲击式凿岩机、锤和破碎器 |
China National Standards vibration |
English PDF |
| GB/T 39523-2020 |
Test method for torsional vibration of precision planetary cycloidal reducers 精密行星摆线减速器扭转振动性能测试方法 |
China National Standards vibration |
English PDF |
| GB/T 38924.6-2020 |
Environmental test methods for civil small and light unmanned aircraft system—Part 6: vibration test 民用轻小型无人机系统环境试验方法 第6部分：振动试验 |
China National Standards vibration |
English PDF |
| GB/T 26548.4-2020 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 4:Straight grinders 手持便携式动力工具 振动试验方法 第4部分：直柄式砂轮机 |
China National Standards vibration |
English PDF |
| GB/T 10068-2020 |
Mechanical vibration of certain machines with shaft heights 56 mm and higher—Measurement, evaluation and limits of vibration severity 轴中心高为56mm及以上电机的机械振动 振动的测量、评定及限值 |
China National Standards vibration |
English PDF |
| GB/T 38447-2020 |
Micro-electromechanical system technology—Fatigue testing method of MEMS structure using resonant vibration 微机电系统（MEMS）技术 MEMS结构共振疲劳试验方法 |
China National Standards vibration |
English PDF |
| GB/T 36668.4-2020 |
Condition monitoring and fault diagnostics of amusement device—Part 4:vibration monitoring method 游乐设施状态监测与故障诊断 第4部分：振动监测方法 |
China National Standards vibration |
English PDF |
| GB/T 39705-2020 |
Track bed vibration isolating mat for rail traffic 轨道交通用道床隔振垫 |
China National Standards vibration |
English PDF |
| GB/T 10910-2020 |
Agricultural wheeled tractors and field machinery—Measurement of whole-body vibration of the operator 农业轮式拖拉机和田间作业机械 驾驶员全身振动的测量 |
China National Standards vibration |
English PDF |
| GB/T 8421-2020 |
Agricultural wheeled tractors—Operator's seat—Laboratory measurement of transmitted vibration 农业轮式拖拉机 驾驶员座椅 传递振动的实验室测量 |
China National Standards vibration |
English PDF |
| GB/T 26548.7-2020 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 7:Nibbler and shears 手持便携式动力工具 振动试验方法 第7部分：冲剪机和剪刀 |
China National Standards vibration |
English PDF |
| GB 50463-2019 |
Code for design of engineering vibration isolation 工程隔振设计标准 |
China National Standards vibration |
English PDF |
| GB/T 19873.3-2019 |
Condition monitoring and diagnostics of machines—vibration condition monitoring—Part 3:Guidelines for vibration diagnosis 机器状态监测与诊断 振动状态监测 第3部分:振动诊断指南 |
China National Standards vibration |
English PDF |
| GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分：试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards vibration |
English PDF |
| GB/T 2423.10-2019 |
Environmental testing—Part 2:Test methods—Test Fc:vibration(sinusoidal) 环境试验 第2部分：试验方法 试验Fc: 振动(正弦) |
China National Standards vibration |
English PDF |
| GB/T 2423.35-2019 |
Environmental testing—Part 2:Tests and guidance—Combined climatic(temperature/humidity)and dynamic(vibration/shock) tests 环境试验 第2部分：试验和导则 气候(温度、湿度)和动力学(振动、冲击)综合试验 |
China National Standards vibration |
English PDF |
| GB/T 2423.10-2019 |
Environmental testing—Part 2:Test methods—Test Fc:vibration(sinusoidal) 环境试验 第2部分：试验方法 试验Fc: 振动(正弦) |
China National Standards vibration |
English PDF |
| GB/T 2423.63-2019 |
Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode) 环境试验 第2部分:试验方法 试验:温度(低温、高温)/低气压/振动(混合模式)综合 |
China National Standards vibration |
English PDF |
| GB/T 32065.9-2019 |
Environmental test methods for oceanographic instruments—Part 14 : vibration test 海洋仪器环境试验方法 第9部分:长霉试验 |
China National Standards vibration |
English PDF |
| GB/T 2423.62-2018 |
Environmental testing—Part 2:Test motheds—Test Fx and guidance:Mulit input mulit output vibration test 环境试验-第2部分:试验方法-试验Fx和导则:多输入多输出振动 |
China National Standards vibration |
English PDF |
| GB/T 5170.13-2018 |
Inspection methods for environmental testing equipments—Part 13: Mechanical vibrating type system for vibration(sinusoidal) test 环境试验设备检验方法-第13部分：振动(正弦)试验用机械式振动系统 |
China National Standards vibration |
English PDF |
| GB/T 5170.15-2018 |
Inspection methods for environmental testing equipments—Part 15：Hydraulic vibrating type system for vibration(sinusoidal) test 环境试验设备检验方法-第15部分：振动(正弦)试验用液压式振动系统 |
China National Standards vibration |
English PDF |
| GB/T 5170.19-2018 |
Inspection methods for environmental testing equipments—Part 19:Combined temperature vibration(sinusoidal) testing equipment 环境试验设备检验方法-第19部分：温度、振动(正弦)综合试验设备 |
China National Standards vibration |
English PDF |
| GB/T 2423.47-2018 |
Environmental testing—Part 2: Test methods—Test Fg: Acoustic vibration 环境试验-第2部分：试验方法-试验Fg：声振 |
China National Standards vibration |
English PDF |
| GB/T 2423.48-2018 |
Environmental testing—Part 2:Test methods—Test Ff: vibration—Time-history and sine-beat method 环境试验-第2部分:-试验方法-试验Ff:振动-时间历程和正弦拍频法 |
China National Standards vibration |
English PDF |
| GB/T 2423.56-2018 |
Environmental testing—Part 2：Test methods—Test Fh：vibration, broadband random and guidance 环境试验-第2部分：试验方法-试验Fh：宽带随机振动和导则 |
China National Standards vibration |
English PDF |
| GB/T 50355-2018 |
Standard of limit and measurement method of vibration in the room of residential buildings 住宅建筑室内振动限值及其测量方法标准 |
China National Standards vibration |
English PDF |
| GB/T 51306-2018 |
Engineering vibration terminology and symbol standards 工程振动术语和符号标准 |
China National Standards vibration |
English PDF |
| GB/T 21563-2018 |
Railway applications—Rolling stock equipment—Shock and vibration tests 轨道交通 机车车辆设备 冲击和振动试验 |
China National Standards vibration |
English PDF |
| GB/T 11349.1-2018 |
Mechanical vibration and shock—Experimental determination of mechanical mobility—Part 1: Basic terms and definitions, and transducer specifications 机械振动与冲击 机械导纳的试验确定 第1部分：基本术语与定义、传感器特性 |
China National Standards vibration |
English PDF |
| GB/T 36416.3-2018 |
Testing machine vocabulary—Part3： vibration test system and shock testing machines 试验机词汇 第3部分：振动试验系统与冲击试验机 |
China National Standards vibration |
English PDF |
| GB/T 36709-2018 |
vibration damping clad steel sheet 减振复合钢板 |
China National Standards vibration |
English PDF |
| GB/T 4937.12-2018 |
Semiconductor devices—Mechanical and climatic test methods—Part 12: vibration, variable frequency 半导体器件 机械和气候试验方法 第12部分：扫频振动 |
China National Standards vibration |
English PDF |
| GB/T 26548.1-2018 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 1:Angle and vertical grinders 手持便携式动力工具 振动试验方法 第1部分：角式和端面式砂轮机 |
China National Standards vibration |
English PDF |
| GB/T 26548.6-2018 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 6:Rammers 手持便携式动力工具 振动试验方法 第6部分：夯实机 |
China National Standards vibration |
English PDF |
| GB/T 20485.16-2018 |
Methods for the calibration of vibration and shock transducers—Part 16: Calibration by Earth’s gravitation 振动与冲击传感器校准方法 第16部分：地球重力法校准 |
China National Standards vibration |
English PDF |
| GB/T 35982-2018 |
Mechanical vibration and shock—Coupling forces at the man-machine interface for hand-transmitted vibration 机械振动与冲击 手传振动人机界面的耦合力 |
China National Standards vibration |
English PDF |
| GB/T 29716.2-2018 |
Mechanical vibration and shock—Signal processing—Part 2: Time domain windows for Fourier Transform analysis 机械振动与冲击 信号处理 第2部分：傅里叶变换分析的时域窗 |
China National Standards vibration |
English PDF |
| GB/T 8243.15-2018 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 15: vibration fatigue test for composite filter housings 内燃机全流式机油滤清器试验方法 第15部分：复合材料滤清器的振动疲劳试验 |
China National Standards vibration |
English PDF |
| GB/T 21231.1-2018 |
Acoustics—Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices—Part 1: Airborne noise measurement 声学 小型通风装置辐射的空气噪声和引起的结构振动的测量 第1部分：空气噪声测量 |
China National Standards vibration |
English PDF |
| GB/T 29716.4-2018 |
Mechanical vibration and shock—Signal processing—Part4：Shock-response spectrum analysis 机械振动与冲击 信号处理 第4部分：冲击响应谱分析 |
China National Standards vibration |
English PDF |
| GB/T 21231.2-2018 |
Acoustics—Measurement of airborne noise emitted and structure-borne vibration induced by small air-moving devices—Part 2: Structure-borne vibration measurements 声学 小型通风装置辐射的空气噪声和引起的结构振动的测量 第2部分：结构振动测量 |
China National Standards vibration |
English PDF |
| GB/T 20485.33-2018 |
Methods for the calibration of vibration and shock transducers—Part 33: Testing of magnetic field sensitivity 振动与冲击传感器校准方法 第33部分：磁灵敏度测试 |
China National Standards vibration |
English PDF |
| GB/T 20485.42-2018 |
Methods for the calibration of vibration and shock transducers—Part 42: Calibration of seismometers with high accuracy using acceleration of gravity 振动与冲击传感器校准方法 第42部分：高精度地震计的重力加速度法校准 |
China National Standards vibration |
English PDF |
| GB/T 35854-2018 |
Mechanical vibration measurement and evaluation for the wind turbines and their components 风力发电机组及其组件机械振动测量与评估 |
China National Standards vibration |
English PDF |
| GB/T 17737.325-2018 |
Coaxial communication cables—Part 1-325: Mechanical test methods—Aeolian vibration 同轴通信电缆 第1-325部分：机械试验方法 风激振动试验 |
China National Standards vibration |
English PDF |
| GB/T 34898-2017 |
Micro electromechanical system technology—Test method for the nonlinear vibration of the MEMS resonant sensitive element 微机电系统（MEMS）技术 MEMS谐振敏感元件非线性振动测试方法 |
China National Standards vibration |
English PDF |
| GB/T 22159.5-2017 |
Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 5: Driving point method for determination of the low-frequency transfer stiffness of resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第5部分：弹性支撑件低频平动动刚度的驱动点测量方法 |
China National Standards vibration |
English PDF |
| GB/T 22159.4-2017 |
Acoustics and vibration―Laboratory measurement of vibro-acoustic transfer properties of resilient elements―Part 4: Dynamic stiffness of elements other than resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第4部分：弹性非支撑件平动动刚度 |
China National Standards vibration |
English PDF |
| GB/T 34516-2017 |
vibration test method for spacecraft 航天器振动试验方法 |
China National Standards vibration |
English PDF |
| GB/T 34186-2017 |
Refractory products—Determination of dynamic Young’s modulus(MOE)at elevated temperatures by impulse excitation of vibration 耐火材料 高温动态杨氏模量试验方法(脉冲激振法) |
China National Standards vibration |
English PDF |
| GB/T 8243.7-2017 |
Methods of test for full-flow lubricating oil filters for internal combustion engines—Part 7：vibration fatigue test 内燃机全流式机油滤清器试验方法 第7部分：振动疲劳试验 |
China National Standards vibration |
English PDF |
| GB/T 26548.9-2017 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 9:Scaling hammers and needle scalers 手持便携式动力工具 振动试验方法 第9部分：除锈锤和针束除锈器 |
China National Standards vibration |
English PDF |
| GB/T 26548.3-2017 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 3:Polishers and rotary ,orbital and random orbital sanders 手持便携式动力工具 振动试验方法 第3部分：抛光机,回转式、滑板式和复式磨光机 |
China National Standards vibration |
English PDF |
| GB/T 26548.5-2017 |
Hand-held portable power tools—Test methods for evaluation of vibration emission—Part 5: Drills and impact drills 手持便携式动力工具 振动试验方法 第5部分：钻和冲击钻 |
China National Standards vibration |
English PDF |
| GB/T 9239.14-2017 |
Mechanical vibration—Rotor balancing—Part14：Procedures for assessing balance errors 机械振动 转子平衡 第14部分：平衡误差的评估规程 |
China National Standards vibration |
English PDF |
| GB/T 9239.32-2017 |
Mechanical vibration—Rotor balancing—Part32：Shaft and fitment key convention 机械振动 转子平衡 第32部分：轴与配合件平衡的键准则 |
China National Standards vibration |
English PDF |
| GB/T 33511-2017 |
Mechanical vibration—Evaluation of measurement results from dynamic tests and investigation on bridges 机械振动 桥梁动态测试与检测测量结果的评估 |
China National Standards vibration |
English PDF |
| GB/T 28784.4-2017 |
Mechanical vibration—Measurement of vibration on ships—Part 4: Measurement and evaluation of vibration of the ship propulsion machinery 机械振动 船舶振动测量 第4部分：船舶推进装置振动的测量和评价 |
China National Standards vibration |
English PDF |
| GB/T 33521.1-2017 |
Mechannical vibration—Ground-borne noise and vibration arising from rail systems—Part1:General guidance 机械振动 轨道系统产生的地面诱导结构噪声和地传振动 第1部分：总则 |
China National Standards vibration |
English PDF |
| GB/T 14598.23-2017 |
Electrical relays—Part 21: vibration, shock, bump and seismic tests on measuring relays and protection equipment—Section 3: Seismic tests 电气继电器 第21部分：量度继电器和保护装置的振动、冲击、碰撞和地震试验 第3篇：地震试验 |
China National Standards vibration |
English PDF |
| GB/T 17189-2017 |
Code for field measurement of vibrations and pulsation in hydraulic machines (turbines, storage pumps and pump-turbines) 水力机械（水轮机、蓄能泵和水泵水轮机）振动和脉动现场测试规程 |
China National Standards vibration |
English PDF |
| GB/T 33199.1-2016 |
Mechanical vibration—Torsional vibration of rotating machinery— Part 1: Land-based steam and gas turbine generator sets in excess of 50 MW 机械振动 旋转机械扭振 第1部分：50MW以上陆地安装的透平和燃气轮机发电机组 |
China National Standards vibration |
English PDF |
| GB/T 7094-2016 |
vibration (sinusoidal) test method for electrical installations in ships 船用电气设备振动（正弦）试验方法 |
China National Standards vibration |
English PDF |
| GB/T 6075.7-2015 |
Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 7: Rotodynamic pumps for industrial applications, including measurements on rotating shafts 机械振动 在非旋转部件上测量评价机器的振动 第7部分：工业应用的旋转动力泵（包括旋转轴测量） |
China National Standards vibration |
English PDF |
| GB/T 32584-2016 |
Evaluation of mechanical vibration for machine sets in hydraulic power plants and pump-storage plants 水力发电厂和蓄能泵站机组机械振动的评定 |
China National Standards vibration |
English PDF |
| GB/T 20140-2016 |
Measurement method and evaluation criteria of dynamic characteristic and vibration on stator end windings of cylindrical synchronous generators 隐极同步发电机定子绕组端部动态特性和振动测量方法及评定 |
China National Standards vibration |
English PDF |
| GB/T 10283-2016 |
Forestry machinery—Portable pneumatic fire extinguisher—Measurement of vibration 林业机械 便携式风力灭火机 振动的测定 |
China National Standards vibration |
English PDF |
| GB/T 33437-2016 |
The test method of static vibration for all terrain vehicles 全地形车静态振动试验方法 |
China National Standards vibration |
English PDF |
| GB/T 6075.4-2015 |
Mechanical vibration—Evaluation of machine vibration by measurements on non-rotating parts—Part 4: Gas turbine sets with fluid-film bearings 机械振动 在非旋转部件上测量评价机器的振动 第4部分：具有滑动轴承的燃气轮机组 |
China National Standards vibration |
English PDF |
| GB/T 32335-2015 |
Mechanical vibration and shock—Parameters to be specified for the acquisition of vibration data 机械振动与冲击 振动数据采集的参数规定 |
China National Standards vibration |
English PDF |
| GB/T 13824-2015 |
Mechanical vibration of rotating and reciprocating machinery—Requirements for instruments for measuring vibration severity 旋转与往复式机器的机械振动 对振动烈度测量仪的要求 |
China National Standards vibration |
English PDF |
| GB/T 13441.5-2015 |
Mechanical vibration and shock—Evaluation of human exposure to whole-body vibration—Part 5: Method for evaluation of vibration containing multiple shocks 机械振动与冲击 人体暴露于全身振动的评价 第5部分：包含多次冲击的振动的评价方法 |
China National Standards vibration |
English PDF |
| GB/T 11348.4-2015 |
Mechanical vibration—Evaluation of machine vibration by measurements on rotating shafts—Part 4: Gas turbine sets with fluid-film bearings 机械振动 在旋转轴上测量评价机器的振动 第4部分：具有滑动轴承的燃气轮机组 |
China National Standards vibration |
English PDF |
| GB/T 32333-2015 |
Rolling bearings—Measuring methods and specifications for vibration (acceleration) 滚动轴承 振动（加速度）测量方法及技术条件 |
China National Standards vibration |
English PDF |
| GB/T 32325-2015 |
Rolling bearings—Specifications for vibration(velocity)of deep groove ball bearings 滚动轴承 深沟球轴承振动（速度）技术条件 |
China National Standards vibration |
English PDF |
| GB/T 20485.41-2015 |
Methods for the calibration of vibration and shock transducers—Part 41: Calibration of laser vibrometers 振动与冲击传感器校准方法 第41部分：激光测振仪校准 |
China National Standards vibration |
English PDF |
| GB/T 31544-2015 |
Test method for elastic properties of glass at high temperatures—Impulse excitation of vibration 玻璃材料高温弹性性能试验方法 脉冲激振法 |
China National Standards vibration |
English PDF |
| GB 51076-2015 |
Technical code for anti-microvibration engineering of electronics industry 电子工业防微振工程技术规范 |
China National Standards vibration |
English PDF |
| GB/T 31305-2014 |
Electromagnetic vibration air pump for aquariums and similar application 水族箱用及类似用途的电磁振动式气泵 |
China National Standards vibration |
English PDF |
| GB/T 5395-2014 |
Forestry and gardening machinery—vibration test code for portable hand-held machines with internal combustion engine—Vibration at the handles 林业及园林机械 以内燃机为动力的便携式手持操作机械振动测定规范 手把振动 |
China National Standards vibration |
English PDF |
| GB/T 30173.2-2014 |
Mechanical vibration and shock―Resilient mounting systems―Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems 机械振动与冲击 弹性安装系统 第2部分：轨道交通系统隔振应用需交换的技术信息 |
China National Standards vibration |
English PDF |
| GB/T 28784.2-2014 |
Mechanical vibration—Measurement of vibration on ships—Part 2: Measurement of structural vibration 机械振动 船舶振动测量 第2部分：结构振动测量 |
China National Standards vibration |
English PDF |
| GB/T 30758-2014 |
Refractory products―Determination of dynamic Young’s modulus(MOE) by impulse excitation of vibration 耐火材料 动态杨氏模量试验方法（脉冲激振法） |
China National Standards vibration |
English PDF |
| GB/T 30575-2014 |
Mechanical vibration and shock―Human exposure―Biodynamic coordinate systems 机械振动与冲击 人体暴露 生物动力学坐标系 |
China National Standards vibration |
English PDF |
| GB/T 14790.2-2014 |
Mechanical vibration―Measurement and evaluation of human exposure to hand-transmitted vibration―Part 2: Practical guidance for measurement at the workplace 机械振动 人体暴露于手传振动的测量与评价 第2部分：工作场所测量实用指南 |
China National Standards vibration |
English PDF |
| GB/T 30173.1-2013 |
Mechanical vibration and shock—Resilient mounting systems—Part 1: Technical information to be exchanged for the application of isolation systems 机械振动与冲击 弹性安装系统 第1部分：用于交换的隔振系统的技术信息 |
China National Standards vibration |
English PDF |
| GB/T 29895-2013 |
Standard test methods for nondestructive evaluation of wood-based flexural members using transverse vibration 横向振动法测试木质材料动态弯曲弹性模量方法 |
China National Standards vibration |
English PDF |
| GB/T 29716.1-2013 |
Mechanical vibration and shock - Signal processing - Part 1: General introduction 机械振动与冲击 信号处理 第1部分：引论 |
China National Standards vibration |
English PDF |
| GB/T 29715-2013 |
Mechanical vibration and shock - Guidelines for dynamic tests and investigations on bridges and viaducts 机械振动与冲击 桥和高架桥动态试验和检测指南 |
China National Standards vibration |
English PDF |
| GB/T 29714-2013 |
Mechanical vibration - Balancing - Guidance on the use and application of balancing standards 机械振动 平衡 平衡标准的用法和应用指南 |
China National Standards vibration |
English PDF |
| GB/T 15168-2013 |
vibration and shock isolators measuring method for its static and dynamic characteristics 振动与冲击隔离器静、动态性能测试方法 |
China National Standards vibration |
English PDF |
| GB/T 29531-2013 |
Methods of measuring and evaluating vibration of pumps 泵的振动测量与评价方法 |
China National Standards vibration |
English PDF |
| GB 50868-2013 |
Standard for allowable vibration of building engineering 建筑工程容许振动标准 |
China National Standards vibration |
English PDF |
| GB/T 22159.2-2012 |
Acoustics and vibration - Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 2: Direct method for determination of the dynamic stiffness of resilient supports for translatory motion 声学与振动 弹性元件振动-声传递特性实验室测量方法 第2部分：弹性支撑件平动动刚度的直接测量方法 |
China National Standards vibration |
English PDF |
| GB/T 22159.1-2012 |
Acoustics and vibration-Laboratory measurement of vibro-acoustic transfer properties of resilient elements - Part 1 : Principles and guidelines 声学与振动 弹性元件振动-声传递特性实验室测量方法 第1部分：原理与指南 |
China National Standards vibration |
English PDF |
| GB/T 4857.23-2012 |
Packaging - Basic tests for transport packages - Part 23：Random vibration test method 包装 运输包装件基本试验 第23部分: 随机振动试验方法 |
China National Standards vibration |
English PDF |
| GB/T 6075.2-2012 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min，1800r/min，3000r/min and 3600r/min 机械振动 在非旋转部件上测量评价机器的振动 第2部分：50MW以上，额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards vibration |
English PDF |
| GB/T 6075.1-2012 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 1: General guidelines 机械振动 在非旋转部件上测量评价机器的振动 第1部分：总则 |
China National Standards vibration |
English PDF |
| GB/T 28785-2012 |
Mechanical vibration - Criteria and safeguards for the in-situ balancing of medium and large rotors 机械振动 大中型转子现场平衡的准则和防护 |
China National Standards vibration |
English PDF |
| GB/T 28784.3-2012 |
Mechanical vibration - Measurement of vibration on ships - Part 3: Pre-installation vibration measurement of shipboard equipment 机械振动 船舶振动测量 第3部分：船上设备安装前的振动测量 |
China National Standards vibration |
English PDF |
| GB/T 13441.4-2012 |
Mechanical vibration and shock - Evaluation of human exposure to whole-body vibration - Part 4: Guidelines for the evaluation of the effects of vibration and rotational motion on passenger and crew comfort in fixed-guideway transport systems 机械振动与冲击 人体暴露于全身振动的评价 第4部分：振动和旋转运动对固定导轨运输系统中的乘客及乘务员舒适影响的评价指南 |
China National Standards vibration |
English PDF |
| GB/T 11348.2-2012 |
Mechanical vibration - Evaluation of machines vibration by measurements on rotating shafts - Part 2: Land-based steam turbine - generators in excess of 50MW with normal operating speeds of 1500r/min，1800r/min，3000r/min and 3600r/min 机械振动 在旋转轴上测量评价机器的振动 第2部分：功率大于50MW,额定工作转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards vibration |
English PDF |
| GB/T 6075.3-2011 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 3：Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ 机械振动 在非旋转部件上测量评价机器的振动 第3部分：额定功率大于15kW额定转速在120 r/min至15000r/min之间的在现场测量的工业机器 |
China National Standards vibration |
English PDF |
| GB/T 20485.31-2011 |
Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity 振动与冲击传感器的校准方法 第31部分：横向振动灵敏度测试 |
China National Standards vibration |
English PDF |
| GB/T 11348.3-2011 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines 机械振动 在旋转轴上测量评价机器的振动 第3部分：耦合的工业机器 |
China National Standards vibration |
English PDF |
| GB/T 27864-2011 |
Packaging for dangerous goods - vibration test of intermediate bulk containers 危险货物包装 中型散装容器振动试验 |
China National Standards vibration |
English PDF |
| GB/T 27694-2011 |
Safety of industrial trucks - Test methods for measuring vibration 工业车辆安全 振动的测量方法 |
China National Standards vibration |
English PDF |
| GB/T 26894-2011 |
Grain and oil machinery - vibration separator 粮油机械 振动清理筛 |
China National Standards vibration |
English PDF |
| GB/T 26548.2-2011 |
Hand-held portable power tools - Test methods for evaluation of vibration emission - Part 2: Wrenches,nutrunners and screwdrivers 手持便携式动力工具 振动试验方法 第2部分：气扳机、螺母扳手和螺丝刀 |
China National Standards vibration |
English PDF |
| GB/T 26506-2011 |
vibration screen with cantilever mesh 悬臂筛网振动筛 |
China National Standards vibration |
English PDF |
| GB/Z 26139-2010 |
Earth-moving machinery - Guidelines for assessment of exposure to whole-body vibration of ride-on machines - Use of harmonized data measured by international institutes, organizations and manufacturers 土方机械 驾乘式机器暴露于全身振动的评价指南 国际协会、组织和制造商所测定协调数据的应用 |
China National Standards vibration |
English PDF |
| GB/T 12085.15-2010 |
Optics and optical instruments - Environmental test methods - Part 15: Combined digitally controlled broad-band random vibration and dry heat or cold 光学和光学仪器 环境试验方法 第15部分：宽带随机振动(数字控制)与高温、低温综合试验 |
China National Standards vibration |
English PDF |
| GB/T 12085.10-2010 |
Optics and optical instruments - Environmental test methods - Part 10: Combined sinusoidal vibration and dry heat or cold 光学和光学仪器 环境试验方法 第10部分：振动(正弦)与高温、低温综合试验 |
China National Standards vibration |
English PDF |
| GB/T 20485.15-2010 |
Methods for the calibration of vibration and shock transducers - Part 15: Primary angular vibration calibration by laser interferometry 振动与冲击传感器校准方法 第15部分：激光干涉法角振动绝对校准 |
China National Standards vibration |
English PDF |
| GB/T 2298-2010 |
Mechanical vibration，shock and condition monitoring - Vocabulary 机械振动、冲击与状态监测 词汇 |
China National Standards vibration |
English PDF |
| GB/T 18707.2-2010 |
Mechanical vibration - Laboratory method for evaluating vehicle seat vibration - Part 2：Application to railway vehicle 机械振动 评价车辆座椅振动的实验室方法 第2部分：应用于机车车辆 |
China National Standards vibration |
English PDF |
| GB/T 25631-2010 |
Mechanical vibration - Hand-held and hand-guided machinery - Principles for evaluation of vibration emission 机械振动 手持式和手导式机械 振动评价规则 |
China National Standards vibration |
English PDF |
| GB/T 13670-2010 |
Mechanical vibration - Measurement and analysis of whole-body vibration to which passengers and crew are exposed in railway vehicles 机械振动 铁道车辆内乘客及乘务员暴露于全身振动的测量与分析 |
China National Standards vibration |
English PDF |
| GB/T 24610.4-2009 |
Rolling bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第4部分：具有圆柱孔和圆柱外表面的圆柱滚子轴承 |
China National Standards vibration |
English PDF |
| GB/T 24610.3-2009 |
Rolling bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第3部分：具有圆柱孔和圆柱外表面的调心滚子轴承和圆锥滚子轴承 |
China National Standards vibration |
English PDF |
| GB/T 24610.2-2009 |
Rolling bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第2部分：具有圆柱孔和圆柱外表面的向心球轴承 |
China National Standards vibration |
English PDF |
| GB/T 24610.1-2009 |
Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals 滚动轴承 振动测量方法 第1部分：基础 |
China National Standards vibration |
English PDF |
| GB/T 24145-2009 |
Rubber hoses and hose assemblies for rotary drilling and vibration application - Specification 旋转钻探和减震用橡胶软管和软管组合件 规范 |
China National Standards vibration |
English PDF |
| GB/T 23718.2-2009 |
Condition monitoring and diagnostics of machines - Requirements for training and certification of personnel - Part 2: vibration condition monitoring and diagnostics 机器状态监测与诊断 人员培训与认证的要求 第2部分：振动状态监测与诊断 |
China National Standards vibration |
English PDF |
| GB/T 5170.14-2009 |
Inspection methods for basic parameters of environmental testing equipments - Electrodynamic vibrating type machines for vibration(sinusoidal) test 环境试验设备基本参数检验方法 振动（正弦）试验用电动振动台 |
China National Standards vibration |
English PDF |
| GB/T 7670-2009 |
Electrodynamic vibration generating systems(equipment) - Performance characteristics 电动振动发生系统（设备） 性能特性 |
China National Standards vibration |
English PDF |
| GB/T 6557-2009 |
Mechanical vibration - Methods and criteria for the mechanical balancing of flexible rotors 挠性转子机械平衡的方法和准则 |
China National Standards vibration |
English PDF |
| GB/T 23717.2-2009 |
Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 2: Classification 机械振动与冲击 装有敏感设备建筑物内的振动与冲击 第2部分：分级 |
China National Standards vibration |
English PDF |
| GB/T 23717.1-2009 |
Mechanical vibration and shock - Vibration and shock in buildings with sensitive equipment - Part 1: Measurement and evaluation 机械振动与冲击 装有敏感设备建筑物内的振动与冲击 第1部分：测量与评价 |
China National Standards vibration |
English PDF |
| GB/T 23716-2009 |
Human response to vibration - Measuring instrumentation 人体对振动的响应 测量仪器 |
China National Standards vibration |
English PDF |
| GB/T 23715-2009 |
vibration and shock generating systems - Vocabulary 振动与冲击发生系统 词汇 |
China National Standards vibration |
English PDF |
| GB/T 23714-2009 |
Mechanical vibration and shock - Performance parameters for condition monitoring of structures 机械振动与冲击 结构状态监测的性能参数 |
China National Standards vibration |
English PDF |
| GB/T 19873.2-2009 |
Condition monitoring and diagnostics of machines - vibration condition monitoring - Part 2: Processing, analysis and presentation of vibration data 机器状态监测与诊断 振动状态监测 第2部分：振动数据处理、分析与描述 |
China National Standards vibration |
English PDF |
| GB/T 18328.1-2009 |
vibration generating machines - Guidance for selection - Part 1: Equipment for environmental testing 振动发生设备选择指南 第1部分：环境试验设备 |
China National Standards vibration |
English PDF |
| GB/T 14790.1-2009 |
Mechanical vibration - Measurement and evaluation of human exposure to hand-transmitted vibration - Part 1: General requirements 机械振动 人体暴露于手传振动的测量与评价 第1部分：一般要求 |
China National Standards vibration |
English PDF |
| GB/T 14124-2009 |
Mechanical vibration and shock - Vibration of buildings - Guidelines for the measurement of vibrations and evaluation of their effects on buildings 机械振动与冲击 建筑物的振动 振动测量及其对建筑物影响的评价指南 |
China National Standards vibration |
English PDF |
| GB/T 13437-2009 |
Description of torsional vibration absorber characteristics 扭转振动减振器特性描述 |
China National Standards vibration |
English PDF |
| GB/T 10179-2009 |
Servo-hydraulic test equipment for generating vibration - Method of describing characteristics 液压伺服振动试验设备 特性的描述方法 |
China National Standards vibration |
English PDF |
| GB/T 23682-2009 |
Refrigerating systems and heat pumps - Flexible pipe elements, vibration isolators and expansion joints - Requirements, design and installation 制冷系统和热泵 软管件、隔震管和膨胀接头 要求、设计与安装 |
China National Standards vibration |
English PDF |
| GB/T 6383-2009 |
The method of vibration cavitation erosion test 振动空蚀试验方法 |
China National Standards vibration |
English PDF |
| GB/T 16305-2009 |
Torsional vibration absorbers 扭转振动减振器 |
China National Standards vibration |
English PDF |
| GB/T 5170.21-2008 |
Inspection methods for basic parameters of environmental testing equipments - Hydraulic vibrating type machines for vibration(random) test 电工电子产品环境试验设备基本参数检验方法 振动(随机)试验用液压振动台 |
China National Standards vibration |
English PDF |
| GB/T 4797.7-2008 |
Classification of environmental conditions - Environmental conditions of nature - Earthquake vibration and shock 电工电子产品环境条件分类 自然环境条件 地震振动和冲击 |
China National Standards vibration |
English PDF |
| GB/T 2423.59-2008 |
Environmental testing - Part 2: Test methods - Test Z/ABMFh: Combined temperature(cold and heat)/low air pressure/vibration（random） 电工电子产品环境试验 第2部分：试验方法 试验Z/ABMFh：温度（低温、高温）/低气压/振动（随机）综合 |
China National Standards vibration |
English PDF |
| GB/T 2424.26-2008 |
Environmental testing - Supporting documentation and guidance - Selecting amongst vibration tests 电工电子产品环境试验 第3部分：支持文件和导则 振动试验选择 |
China National Standards vibration |
English PDF |
| GB/T 22665.6-2008 |
Measurement of vibrations at the handle of hand-held electric tools - Part 6: Hammers 手持式电动工具手柄的振动测量方法 第6部分：锤类工具 |
China National Standards vibration |
English PDF |
| GB/T 22665.5-2008 |
Measurement of vibrations at the handle of hand-held electric tools - Part 5: Circular saws 手持式电动工具手柄的振动测量方法 第5部分：圆锯 |
China National Standards vibration |
English PDF |
| GB/T 22665.4-2008 |
Measurement of vibrations at the handle of hand-held electric tools - Part 4: Sanders and polishers other than disk type 手持式电动工具手柄的振动测量方法 第4部分：非盘式砂光机和抛光机 |
China National Standards vibration |
English PDF |
| GB/T 22665.3-2008 |
Measurement of vibrations at the handle of hand-held electric tools - Part 3: Grinders, polishers and disk-type sanders 手持式电动工具手柄的振动测量方法 第3部分：砂轮机、抛光机和盘式砂光机 |
China National Standards vibration |
English PDF |
| GB/T 22665.2-2008 |
Measurement of vibrations at the handle of hand-held electric tools - Part 2: Screwdrivers and impact wrenches 手持式电动工具手柄的振动测量方法 第2部分：螺丝刀和冲击扳手 |
China National Standards vibration |
English PDF |
| GB/T 22665.1-2008 |
Measurement of vibrations at the handle of hand-held electric tools - Part 1: Drills and impact drills 手持式电动工具手柄的振动测量方法 第1部分：电钻和冲击钻 |
China National Standards vibration |
English PDF |
| GB/T 10283-2008 |
Forestry machinery - Portable pneumatic fire extinguisher - Measurement of vibration at the handles 林业机械 便携式风力灭火机 手把振动的测定 |
China National Standards vibration |
English PDF |
| GB 50463-2008 |
Code for design of vibration isolation 隔振设计规范 |
China National Standards vibration |
English PDF |
| GB/T 6444-2008 |
Mechanical vibration - Balancing vocabulary 机械振动 平衡词汇 |
China National Standards vibration |
English PDF |
| GB/T 14125-2008 |
Mechanical vibration and shock - Measurement and evaluation of shock and vibration effects on sensitive equipment in buildings 机械振动与冲击 振动与冲击对建筑物内敏感设备影响的测量和评价 |
China National Standards vibration |
English PDF |
| GB/T 13823.20-2008 |
Methods for the calibration of vibration and shock pick-ups - Accelerometer resonance testing - General methods 振动与冲击传感器校准方法 加速度计谐振测试 通用方法 |
China National Standards vibration |
English PDF |
| GB/T 13823.19-2008 |
Methods for the calibration of vibration and shock pick-ups - Calibration by Earth’s gravitation 振动与冲击传感器的校准方法 地球重力法校准 |
China National Standards vibration |
English PDF |
| Find out:323Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
