Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| XB/T 239-2022 |
Terbium fluoride and Dysprosium fluoride for grain boundary diffusion Sintered NdFeB permanent magnet materials {译} 晶界扩散烧结钕铁硼永磁材料用氟化铽、氟化镝 |
China Rare Earth Industry
Standards Sintered |
 English PDF |
| YS/T 1538-2022 |
Sintered metal porous materials - Determination of damping properties {译} 烧结金属多孔材料 阻尼性能的测定 |
China Non-ferrous Metal Industry
Standards Sintered |
English PDF |
| YB/T 6015-2022 |
Test method for surface air volume of Sintered material {译} 烧结料面风量测试方法 |
China Metallurgy Industry
Standards Sintered |
English PDF |
| JB/T 9132-2022 |
Sintered iron-phosphorus soft magnetic material technical specification {译} 烧结铁磷软磁材料 技术规范 |
China Machinery Industry
Standards Sintered |
English PDF |
| JB/T 4115-2022 |
Sintered bimetal sheet for hydraulic pump and hydraulic motor side plate {译} 液压泵、液压马达侧板用烧结双金属板材 |
China Machinery Industry
Standards Sintered |
English PDF |
| JB/T 4114-2022 |
Sintered pure iron soft magnetic material technical specification {译} 烧结纯铁软磁材料 技术规范 |
China Machinery Industry
Standards Sintered |
English PDF |
| JB/T 14680-2022 |
Determination of effective hardening depth of Sintered iron-based parts after induction hardening {译} 烧结铁基零件感应淬火后有效淬硬深度的测定 |
China Machinery Industry
Standards Sintered |
English PDF |
| XB/T 807-2021 |
Technical specification for recycling of waste Sintered NdFeB magnets{译} {译} 废旧烧结钕铁硼磁体再生利用技术规范 |
China Rare Earth Industry
Standards Sintered |
English PDF |
| YB/T 4899-2021 |
Modified Sintered FGD ash used in concrete {译} 用于混凝土中的改性烧结烟气脱硫灰 |
China Metallurgy Industry
Standards Sintered |
English PDF |
| YS/T 1483-2021 |
Sintered metallic porous materials - Determination of sulfidation corrosion properties{译} {译} 烧结金属多孔材料 硫化腐蚀性能的测定 |
China Non-ferrous Metal Industry
Standards Sintered |
English PDF |
| YS/T 1482-2021 |
Sintered metallic porous materials - Determination of the strength of tubular compacts{译} {译} 烧结金属多孔材料 管状压坯强度的测定 |
China Non-ferrous Metal Industry
Standards Sintered |
English PDF |
| YS/T 1480-2021 |
Nickel-aluminum intermetallic compound Sintered porous material tubular filter element{译} {译} 镍铝金属间化合物烧结多孔材料管状过滤元件 |
China Non-ferrous Metal Industry
Standards Sintered |
English PDF |
| JG/T 575-2020 |
Non-Sintered regenerated product of construction waste 工程渣土免烧再生制品 |
China JG - Building Industry
Standards Sintered |
English PDF |
| JB/T 13967-2020 |
Sintered powder metallurgy hollow camshaft Specifications {译} 烧结式粉末冶金中空凸轮轴 技术条件 |
China Machinery Industry
Standards Sintered |
English PDF |
| JB/T 13966-2020 |
Technical conditions for Sintered inner and outer rotors of vehicle fuel pumps {译} 车用燃油泵烧结内外转子技术条件 |
China Machinery Industry
Standards Sintered |
English PDF |
| JB/T 13965-2020 |
Specifications for Sintered cover plate and stator of electronic vacuum pump for vehicle brake system {译} 车用刹车系统电子真空泵烧结盖板和定子技术条件 |
China Machinery Industry
Standards Sintered |
English PDF |
| JB/T 13946-2020 |
Silicon Carbide Special Products Reaction Sintered Silicon Carbide Cantilever Propeller {译} 碳化硅特种制品 反应烧结碳化硅 悬臂桨 |
China Machinery Industry
Standards Sintered |
English PDF |
| JB/T 13945-2020 |
Silicon Carbide Special Products Reaction Sintered Silicon Carbide Saggar {译} 碳化硅特种制品 反应烧结碳化硅 匣钵 |
China Machinery Industry
Standards Sintered |
English PDF |
| YS/T 1375-2020 |
Powder metallurgy iron-based copper infiltration Sintered parts {译} 粉末冶金铁基渗铜烧结件 |
China Non-ferrous Metal Industry
Standards Sintered |
English PDF |
| JB/T 13701-2019 |
Automotive variable pump Sintered rotor, eccentric ring technical conditions {译} 汽车变量泵烧结转子、偏心环 技术条件 |
China Machinery Industry
Standards Sintered |
English PDF |
| NB/T 31102.2-2016 |
(Sintered magnet wires for wind turbine generator sets - Part 2: Test methods) 风力发电机组 发电机用烧结电磁线 第2部分：试验方法 |
China Energy industry
Standards Sintered |
English PDF |
| NB/T 31102.1-2016 |
(Sintered magnet wires for wind turbine generators - Part 1: Technical conditions) 风力发电机组 发电机用烧结电磁线 第1部分：技术条件 |
China Energy industry
Standards Sintered |
English PDF |
| JC/T 2363-2016 |
(General specification for complete sets of production equipment for Sintered insulation bricks and thermal insulation masonry units) 烧结保温砖和保温砌块成套生产设备通用技术条件 |
China Building Materials
Standards Sintered |
English PDF |
| JC/T 2212-2014 |
Solid-state pressureless Sintered silicon carbide ceramic heat exchanger tubes 常压固相烧结碳化硅陶瓷热交换管 |
China Building Materials
Standards Sintered |
English PDF |
| SN/T 3469.6-2014 |
Rules for the inspection of unrefined & Sintered copper material for import 进口粗炼或烧结铜物料检验规程 |
China Import Export Inspection
Standards Sintered |
English PDF |
| SN/T 3469.5-2014 |
Determination of platinum and palladium in imported Sintered copper material of coarse smelting. Inductively coupled plasma mass spectrometry 进口粗炼或烧结铜物料中铂、钯含量的测定 |
China Import Export Inspection
Standards Sintered |
English PDF |
| NB/T 31048.2-2014 |
Winding wires for wind turbine generator. Part 2: Aromatic polyimide tape wrapped and Sintered rectangular copper wire, class 240 风力发电机用绕组线 第2部分：240级 |
China Energy industry
Standards Sintered |
English PDF |
| SN/T 3469.4-2013 |
Determination of gold and silver content in import copper matte or Sintered copper material. Flame atomic absorption spectrometry 进口粗炼或烧铜物料中金、银含量的测定方法 火焰原子吸收光谱法 |
China Import Export Inspection
Standards Sintered |
English PDF |
| SN/T 3469.3-2013 |
Determination of sulfur content in import copper matte and Sintered copper material. High frequency combustion with infrared absorption method 进口粗炼或烧结铜物料中硫含量的测定 高频燃烧红外吸收法 |
China Import Export Inspection
Standards Sintered |
English PDF |
| SN/T 3469.2-2013 |
Determination of flurine in import copper matte or Sintered copper material by ion. Selective electrode 进口粗炼或烧结铜物料中氟含量的测定方法 离子选择电极法 |
China Import Export Inspection
Standards Sintered |
English PDF |
| SN/T 3469.1-2013 |
Determination of copper content in crude refining of copper and copper-based Sintered mineral for import. Short iodometric method 进口粗炼或烧结物料中铜含量的测定 短碘量法 |
China Import Export Inspection
Standards Sintered |
English PDF |
| HG/T 4379-2012 |
Sintered high flux tubes for heat exchanger 烧结型高通量换热管 |
China Chemical Industry
Standards Sintered |
English PDF |
| SN/T 3106-2012 |
Determination of iron,lead,zinc,arsenic,cadmium,aluminum,calcium,magnesium,molybdenum,antimony and mercury in imported Sintered copper material of coarse smelting. Inductively coupled plasma atomic emission spectrometry 进口粗炼含铜烧结物料中铁、铅、锌、砷、镉、铝、钙、镁、钼、锑、汞含量的测定 电感耦合等离子体原子发射光谱法 |
China Import Export Inspection
Standards Sintered |
English PDF |
| JC/T 2042-2011 |
General technical specifications of automatic control system in Sintered brick producing field 烧结砖自动化控制系统通用技术条件 |
China Building Materials
Standards Sintered |
English PDF |
| QB/T 4008-2010 |
UnSintered polyterafluoroethylene(PTFE) tapes for thread sealing 螺纹密封用聚四氟乙烯未烧结带（生料带） |
China Light Industry
Standards Sintered |
English PDF |
| JC/T 925-2003 |
Sintered AZS brick for glass furnace 玻璃窑用烧结AZS砖 |
China Building Materials
Standards Sintered |
English PDF |
| SJ 51520/4-2003 |
Capacitors, electrolytic (solid electrolyte), tantalum, (polarized, Sintered slug), moulded, established reliability, Type CAK41 detail specification for cak41型有可靠性指标的模压固体电解质钽电容器详细规范 |
China Electronics
Standards Sintered |
English PDF |
| SJ 51520/3-2002 |
Capacitors, electrolytic (solid electrolyte), tantalum (polarized, Sintered slug), moulded, established reliability, Type CAK43 detail specification for cak43型可靠性指标的模压固体电解质钽电容器详细规范 |
China Electronics
Standards Sintered |
English PDF |
| SJ 50063/3-2002 |
Capacitors, electrolytic (solid electrolyte), tantalum, (polarized, Sintered slug) hermetically Sealed established reliability type CAK-8 detail specification for cak-8型有可靠性指标的气密封固体电解质钽电容器详细规范 |
China Electronics
Standards Sintered |
English PDF |
| SJ 20210-1992 |
Capacitors, Electrolytic (solid electrolyte), Tantalum, (Polarized, Sintered slug), tape CA420, Detail specification for ｃａ４２０型固体电解质钽电容器详细规范 |
China Electronics
Standards Sintered |
English PDF |
| SJ 20208-1992 |
Capacitors, Electrolytic (solid electrolyte), Tantalum, (nonpolarized, Sintered slug), Established reliability, stapes CAK70, Detail specification for ｃａｋ７０型有可靠性指标的双极性固体电解质钽电容器详细规范 |
China Electronics
Standards Sintered |
English PDF |
| JJG(JB)95-1992 |
(Diamond Sintered body wear ratio analyzer test procedures) |
China Metrological
Standards Sintered |
English PDF |
| Find out:42Items | To Page of: First -Previous-Next -Last | 1 |
+86-755-25831330
