Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 31057.1-2014 |
Granular materialS―The physical properties―Part 1: Determination of apparent density 颗粒材料 物理性能测试 第1部分：松装密度的测量 |
China National Standards S |
 English PDF |
| GB/T 31056-2014 |
Stone—Removed plate 大米去石筛板 |
China National Standards S |
English PDF |
| GB/T 31055-2014 |
Paddy Separating plate 谷糙分离筛板 |
China National Standards S |
English PDF |
| GB/T 31052.1-2014 |
Lifting applianceS―Code of inspection and maintenance—Part 1: General 起重机械 检查与维护规程 第1部分：总则 |
China National Standards S |
English PDF |
| GB/T 31051.1-2014 |
CraneS―Anchoring devices for in-service and out-of-service conditions―Part 1: General 起重机 工作和非工作状态下的锚定装置 第1部分：总则 |
China National Standards S |
English PDF |
| GB/T 31050-2014 |
Energy efficiency teSt methods for metallurgy cranes 冶金起重机能效测试方法 |
China National Standards S |
English PDF |
| GB/T 29613.2-2014 |
Rubber―AnalySis by pyrolytic gas-chromatographic methods―Part 2: Determination of styrene/butadiene/isoprene ratio 橡胶 裂解气相色谱分析法 第2部分：苯乙烯/丁二烯/异戊二烯比率的测定 |
China National Standards S |
English PDF |
| GB/T 22148.2-2014 |
TeSt method on electromagnetic emissions―Part 2: Electronic control gear for discharge lamps excluding fluorescent lamps 电磁发射的试验方法 第2部分：放电灯(荧光灯除外)用电子控制装置 |
China National Standards S |
English PDF |
| GB/T 22148.1-2014 |
TeSt method on electromagnetic emissions―Part 1: Electronic control gear for single-and double-capped fluorescent lamps 电磁发射的试验方法 第1部分：单端和双端荧光灯用电子控制装置 |
China National Standards S |
English PDF |
| GB/T 20641-2014 |
Empty encloSures for Low-voltage switchgear and controlgear assemblies―General requirements 低压成套开关设备和控制设备 空壳体的一般要求 |
China National Standards S |
English PDF |
| GB/T 19464-2014 |
AlkylpolyglycoSides 烷基糖苷 |
China National Standards S |
English PDF |
| GB/T 19428-2014 |
Code for earthquake loSs estimation and its information management system 地震灾害预测及其信息管理系统技术规范 |
China National Standards S |
English PDF |
| GB/T 18425-2014 |
Rubber hoSes and hose assemblies for steam―Test methods 蒸汽橡胶软管和软管组合件 试验方法 |
China National Standards S |
English PDF |
| GB/T 18595-2014 |
Equipment for general lighting purpoSes-EMC immunity requirements 一般照明用设备电磁兼容抗扰度要求 |
China National Standards S |
English PDF |
| GB/T 17626.21-2014 |
Electromagnetic compatibility―TeSting and measurement techniques―Reverberation chamber test methods 电磁兼容 试验和测量技术 混波室试验方法 |
China National Standards S |
English PDF |
| GB/T 17626.20-2014 |
Electromagnetic compatibility—TeSting and measurement techniques—Emission and immunity testing in transverse electromagnetic (TEM) waveguide 电磁兼容 试验和测量技术 横电磁波（TEM）波导中的发射和抗扰度试验 |
China National Standards S |
English PDF |
| GB/T 16895.6-2014 |
Low-voltage electrical inStallations―Part 5-52: Selection and erection of electrical equipment-Wiring systems 低压电气装置 第5-52部分：电气设备的选择和安装 布线系统 |
China National Standards S |
English PDF |
| GB/T 1689-2014 |
Rubber vulcanized―Determination of abraSion resistance (Akron machine) 硫化橡胶 耐磨性能的测定（用阿克隆磨耗试验机） |
China National Standards S |
English PDF |
| GB/T 16586-2014 |
Rubber,vulcanized―Determination of adheSion to wire cord 硫化橡胶 与钢丝帘线粘合强度的测定 |
China National Standards S |
English PDF |
| GB/T 15629.3-2014 |
Information technology—TelecommunicationS and information exchange between systems—Local and metropolitan area networks—Specific requirements—Part 3:Carrier sense multiple access with collision detection (CSMA/CD) access method and physical layer 信息技术 系统间远程通信和信息交换 局域网和城域网 特定要求 第3部分：带碰撞检测的载波侦听多址访问（CSMA/CD）的访问方法和物理层规范 |
China National Standards S |
English PDF |
| GB/T 15445.6-2014 |
RepreSentation of results of particle size analysis—Part 6: Descriptive and quantitative representation of particle shape and morphology 粒度分析结果的表述 第6部分：颗粒形状和形态的定性及定量表述 |
China National Standards S |
English PDF |
| GB/T 15357-2014 |
Surface active agents and detergents―Determination of viscosity and flow properties of liquid products using a rotational viscometer 表面活性剂和洗涤剂 旋转粘度计测定液体产品的粘度和流动性质 |
China National Standards S |
English PDF |
| GB/T 15254-2014 |
Rubber,vulcanized―Determination of adheSion to metal―180°Peel test method 硫化橡胶 与金属粘接 180°剥离试验 |
China National Standards S |
English PDF |
| GB/T 15252-2014 |
Rubber，compounded or vulcanized―Determination of Sulfide sulfur content―Lodometric method 混炼胶或硫化胶 硫化物型硫含量的测定 碘量法 |
China National Standards S |
English PDF |
| GB/T 14837.2-2014 |
Rubber and rubber productS―Determination of the composition of vulcanizates and uncured compounds by thermogravimetry―Part 2: Acrylonitrile-butadiene and halobutyl rubbers 橡胶和橡胶制品 热重分析法测定硫化胶和未硫化胶的成分 第2部分：丙烯腈-丁二烯橡胶和卤化丁基橡胶 |
China National Standards S |
English PDF |
| GB/T 13936-2014 |
Rubber,vulcanized―Method for determination of Strength properties of adhesive to metal in shear by tension loading 硫化橡胶 与金属粘接拉伸剪切强度测定方法 |
China National Standards S |
English PDF |
| GB 31094-2014 |
Safety rules for the construction and installation of lifts for explosive atmospheres 防爆电梯制造与安装安全规范 |
China National Standards S |
English PDF |
| GB 21861-2014 |
ItemS and methods of motor vehicles safety technology inspection 机动车安全技术检验项目和方法 |
China National Standards S |
English PDF |
| GB/T 18855-2014 |
Coal water Slurry for fuel 燃料水煤浆 |
China National Standards S |
English PDF |
| GB/T 51061-2014 |
Code for grid identification System 电网工程标识系统编码规范 |
China National Standards S |
English PDF |
| GB 6675.14-2014 |
Safety of toys―Part 14：Requirements and test methods of finger paints 玩具安全 第14部分：指画颜料技术要求及测试方法 |
China National Standards S |
English PDF |
| GB 6675.13-2014 |
Safety of toys―Part 13：Chemical toys (sets) other than experimental sets 玩具安全 第13部分：除实验玩具外的化学套装玩具 |
China National Standards S |
English PDF |
| GB 6675.12-2014 |
Safety of toys－Part 12: Toy scooter 玩具安全 第12部分：玩具滑板车 |
China National Standards S |
English PDF |
| GB 6675.11-2014 |
Safety of toys - Part 11：Swings, slides and similar activity toys for indoor and outdoor family domestic use 玩具安全 第11部分：家用秋千、滑梯及类似用途室内、室外活动玩具 |
China National Standards S |
English PDF |
| GB 4706.90-2014 |
HouSehold and similar electrical appliances―Safety―Particular requirements for commercial microwave ovens 家用和类似用途电器的安全 商用微波炉的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.82-2014 |
HouSehold and similar electrical appliances—Safety—Particular requirements for flexible sheet heating elements for room heating 家用和类似用途电器的安全 房间加热用软片加热元件的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.81-2014 |
HouSehold and similar electrical appliances—Safety—Particular requirements for vaporizers 家用和类似用途电器的安全 挥发器的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.80-2014 |
HouSehold and similar electrical appliances―Safety―Particular requirements for foot warmers and heating mats 家用和类似用途电器的安全 暖脚器和热脚垫的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.7-2014 |
HouSehold and similar electrical appliances―Safety―Particular requirements for vacuum cleaners and water-suction cleaning appliances 家用和类似用途电器的安全 真空吸尘器和吸水式清洁器具的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.47-2014 |
HouSehold and similar electrical appliances—Safety—Particular requirements for electrical heating appliances for breeding and rearing animals 家用和类似用途电器的安全 动物繁殖和饲养用电加热器的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.46-2014 |
HouSehold and similar electrical appliances―Safety―Particular requirements for milking machines 家用和类似用途电器的安全 挤奶机的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.36-2014 |
HouSehold and similar electrical appliances―Safety―Particular requirements for commercial water electric boilers and liquid heaters 家用和类似用途电器的安全 商用电开水器和液体加热器的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.18-2014 |
HouSehold and similar electrical appliances―Safety―Particular requirements for battery chargers 家用和类似用途电器的安全 电池充电器的特殊要求 |
China National Standards S |
English PDF |
| GB 4706.13-2014 |
HouSehold and similar electrical appliances―Safety―Particular requirements for refrigerating appliances, ice-cream appliances and ice-makers 家用和类似用途电器的安全 制冷器具、冰淇淋机和制冰机的特殊要求 |
China National Standards S |
English PDF |
| GB/T 9694-2014 |
PreServed egg 皮蛋 |
China National Standards S |
English PDF |
| GB/T 31323-2014 |
InStant rice 方便米饭 |
China National Standards S |
English PDF |
| GB/T 31307-2014 |
Single electromagnetic piston air pump for aquariums and similar application 水族箱用及类似用途的单级电磁活塞式气泵 |
China National Standards S |
English PDF |
| GB/T 31306-2014 |
Circulating water temperature regulator for aquariumS and similar application 水族箱用及类似用途循环水温调节机 |
China National Standards S |
English PDF |
| GB/T 31305-2014 |
Electromagnetic vibration air pump for aquariumS and similar application 水族箱用及类似用途的电磁振动式气泵 |
China National Standards S |
English PDF |
| GB/T 31299-2014 |
HouSehold electric thermal storage room heaters─Methods for measuring performance 家用储热式室内加热器 性能测试方法 |
China National Standards S |
English PDF |
| GB/T 20291.1-2014 |
Vacuum cleanerS for household use—Part 1：Dry vacuumcleaners—Methods for measuring the performance 家用真空吸尘器 第1部分：干式真空吸尘器 性能测试方法 |
China National Standards S |
English PDF |
| GB/T 15765-2014 |
Hermetic motor-compreSsors for room conditioners 房间空气调节器用全封闭型电动机―压缩机 |
China National Standards S |
English PDF |
| GB/T 13516-2014 |
Canned peacheS 桃罐头 |
China National Standards S |
English PDF |
| GB 31040-2014 |
Limit of reSidual formaldehyde from the concrete admixtures 混凝土外加剂中残留甲醛的限量 |
China National Standards S |
English PDF |
| GB 31039-2014 |
PretenSioned spun concrete special-shaped piles 先张法预应力离心混凝土异型桩 |
China National Standards S |
English PDF |
| GB 5959.5-2014 |
Safety in electroheat installations―Part 5: Particular requirements for plasma installations 电热装置的安全 第5部分：对等离子体装置的特殊要求 |
China National Standards S |
English PDF |
| GB 3883.1-2014 |
Safety of motor-operated hand-held, transportable electric tools and lawn and garden tools―Part 1：General requirements 手持式、可移式电动工具和园林工具的安全 第1部分：通用要求 |
China National Standards S |
English PDF |
| GB 3836.9-2014 |
ExploSive atmospheres―Part 9: Equipment protection by type of protection “m” 爆炸性环境 第9部分：由浇封型“m”保护的设备 |
China National Standards S |
English PDF |
| GB 3836.8-2014 |
ExploSive atmospheres―Part 8: Equipment protection by type of protection “n” 爆炸性环境 第8部分: 由“n”型保护的设备 |
China National Standards S |
English PDF |
| GB 3836.14-2014 |
ExploSive atmospheres—Part 14: Classification of areas—Explosive gas atmosphere 爆炸性环境 第14部分：场所分类 爆炸性气体环境 |
China National Standards S |
English PDF |
| GB 31252-2014 |
Electrical receptacleS and switches with fire monitoring and alarm function 防火监控报警插座与开关 |
China National Standards S |
English PDF |
| GB 19212.21-2014 |
Safety of transformers, reactors, power supply units and combinations thereof―Part 21: Particular requirements and tests for small reactors 变压器、电抗器、电源装置及其组合的安全 第21部分：小型电抗器的特殊要求和试验 |
China National Standards S |
English PDF |
| GB 19212.10-2014 |
Safety of transformers,reactors, power supply units and combinations thereof―Part 10: Particular requirements and tests for transformers and power supply units for class Ⅲ handlamps for tungsten filament lamps 变压器、电抗器、电源装置及其组合的安全 第10部分:Ⅲ类手提钨丝灯用变压器和电源装置的特殊要求和试验 |
China National Standards S |
English PDF |
| GB 15579.8-2014 |
Arc welding equipment—Part 8: GaS consoles for welding and plasma cutting systems 弧焊设备 第8部分：焊接和等离子切割系统的气路装置 |
China National Standards S |
English PDF |
| GB 15579.4-2014 |
Arc welding equipment—Part 4: Periodic inSpection and testing 弧焊设备 第4部分：周期检查和试验 |
China National Standards S |
English PDF |
| GB 15579.3-2014 |
Arc welding equipment—Part 3: Arc Striking and stabilizing devices 弧焊设备 第3部分：引弧和稳弧装置 |
China National Standards S |
English PDF |
| GB 15579.2-2014 |
Arc welding equipment―Part 2: Liquid cooling Systems 弧焊设备 第2部分：液体冷却系统 |
China National Standards S |
English PDF |
| GB/T 6326-2014 |
Tyre termS and definitions 轮胎术语及其定义 |
China National Standards S |
English PDF |
| GB/T 31296-2014 |
Sulfate-resistant and corrosion-inhibiting admixtures for concrete 混凝土防腐阻锈剂 |
China National Standards S |
English PDF |
| GB/T 31295-2014 |
The core to wind turbine blade―Determination of dimenSional stability at elevated temperatures with flexural load and with compressive load 风电叶片用芯材 弯曲载荷和压缩载荷下高温尺寸稳定性的测定 |
China National Standards S |
English PDF |
| GB/T 31294-2014 |
The core to wind turbine blade―TeSt method for facing cleavage of sandwich panels 风电叶片用芯材 夹芯板面层剥离强度的测定 |
China National Standards S |
English PDF |
| GB/T 31293-2014 |
Vacuum reSin infusion molding epoxy for wind blade 风电叶片用真空导入环氧树脂 |
China National Standards S |
English PDF |
| GB/T 31292-2014 |
Carbon fibre―Determination of carbon content―CombuStion absorption method 碳纤维 碳含量的测定 燃烧吸收法 |
China National Standards S |
English PDF |
| GB/T 31290-2014 |
Carbon fibre—Determination of the tenSile properties of single-filament specimens 碳纤维 单丝拉伸性能的测定 |
China National Standards S |
English PDF |
| GB/T 31288-2014 |
Iron tailingS sand 铁尾矿砂 |
China National Standards S |
English PDF |
| GB/T 2982-2014 |
DeSignation,dimensions,inflation pressure and load capacity of pneumatic tyres for industrial vehicles 工业车辆充气轮胎规格、尺寸、气压与负荷 |
China National Standards S |
English PDF |
| GB/T 2981-2014 |
Technical Specification of pneumatic tyres for industrial vehicles 工业车辆充气轮胎技术条件 |
China National Standards S |
English PDF |
| GB/T 2978-2014 |
Size designation,dimensions,inflation pressure and load capacity for passenger car tyres 轿车轮胎规格、尺寸、气压与负荷 |
China National Standards S |
English PDF |
| GB/T 19390-2014 |
Dipped polyeSter cord fabric for tyres 轮胎用聚酯浸胶帘子布 |
China National Standards S |
English PDF |
| GB/T 18370-2014 |
GlaSs fibre woven roving 玻璃纤维无捻粗纱布 |
China National Standards S |
English PDF |
| GB 25325-2014 |
The norm of energy conSumption for prebaked anode products for aluminium 铝电解用预焙阳极单位产品能源消耗限额 eletrolyzation |
China National Standards S |
English PDF |
| GB 25324-2014 |
The norm of energy conSumption for cathode carbon block for aluminium eletrolyzation 铝电解用石墨质阴极炭块单位产品能源消耗限额 |
China National Standards S |
English PDF |
| GB/T 5216-2014 |
Structural steel with specified hardenability bands 保证淬透性结构钢 |
China National Standards S |
English PDF |
| GB/T 31321-2014 |
The teSt methods for frozen drink products 冷冻饮品检验方法 |
China National Standards S |
English PDF |
| GB/T 31317-2014 |
CorroSion of metals and alloys—Black box exposure test method 金属和合金的腐蚀 黑箱暴露试验方法 |
China National Standards S |
English PDF |
| GB/T 31316-2014 |
General principleS of cathodic protection in sea water 海水阴极保护总则 |
China National Standards S |
English PDF |
| GB/T 31315-2014 |
Cold drawn or cold rolled preciSion weld steel tubes for mechanical structures 机械结构用冷拔或冷轧精密焊接钢管 |
China National Standards S |
English PDF |
| GB/T 31314-2014 |
Multi wireS of large diameter strand with high-strength and low-relaxation strand for prestressing 多丝大直径高强度低松驰预应力钢绞线 |
China National Standards S |
English PDF |
| GB/T 31313-2014 |
FluorSpas—Determination of particle size distribution by sieving 萤石 粒度的筛分测定 |
China National Standards S |
English PDF |
| GB/T 31312-2014 |
Metallurgical grade fluorSpar―Determination of antimony content―Solvent extraction atomic absorption spectrometric method 冶金级萤石 锑含量的测定 溶剂萃取原子吸收光谱法 |
China National Standards S |
English PDF |
| GB/T 31311-2014 |
Metallurgical-grade fluorSpar―Determination of lead content―Solvent extraction atomic absorption spectrometric method 冶金级萤石 铅含量的测定 溶剂萃取原子吸收光谱法 |
China National Standards S |
English PDF |
| GB/T 31310-2014 |
Metallic material—Determination of reSidual stress—Hole drilling strain-gauge method 金属材料 残余应力测定 钻孔应变法 |
China National Standards S |
English PDF |
| GB/T 31309-2014 |
Calculation of electoron vacancy number in nickel-baSe superalloys 镍基高温合金电子空位数计算方法 |
China National Standards S |
English PDF |
| GB/T 31304-2014 |
Epoxy-coated high Strength wire stay cable 环氧涂层高强度钢丝拉索 |
China National Standards S |
English PDF |
| GB/T 31303-2014 |
AuStenitic-Ferritic duplex stainless steel bars 奥氏体-铁素体型双相不锈钢棒 |
China National Standards S |
English PDF |
| GB/T 21143-2014 |
Metallic materialS―Unified method of test for determination of quasistatic fracture toughness 金属材料 准静态断裂韧度的统一试验方法 |
China National Standards S |
English PDF |
| GB/T 17394.1-2014 |
Metallic materialS―Leeb hardness test―Part 1: Test method 金属材料 里氏硬度试验 第1部分：试验方法 |
China National Standards S |
English PDF |
| GB/T 1299-2014 |
Tool and mould Steels 工模具钢 |
China National Standards S |
English PDF |
| GB 31247-2014 |
ClaSsification for burning behavior of electric and optical cables 电缆及光缆燃烧性能分级 |
China National Standards S |
English PDF |
| GB/T 4372.7-2014 |
MethodS for chemical analysis of zinc oxide produced by direct process―Part 7：Determinantion of ferric oxide content―Flame atomic absorption spectrometry method 直接法氧化锌化学分析方法 第7部分：三氧化二铁量的测定 火焰原子吸收光谱法 |
China National Standards S |
English PDF |
| Find out:56282Items | To Page of: First -Previous-Next -Last | [253] [254] [255] [256] [257] [258] [259] |
+86-755-25831330
