Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 44212-2024 |
Quality grading of consumer products-kitchen and bathroom HArdware products 消费品质量分级-厨卫五金产品 |
China National Standards HA |
 English PDF |
| GB/T 44180-2024 |
General technical requirements for kitchen and bathroom HArdware products 厨卫五金产品通用技术要求 |
China National Standards HA |
English PDF |
| GB/T 44165.1-2024 |
Detection methods for key chemical substances in consumer products-Part 1: Short-cHAin chlorinated paraffins 消费品中重点化学物质检测方法-第1部分：短链氯化石蜡 |
China National Standards HA |
English PDF |
| GB/T 44155-2024 |
Steel forgings-Test frequency, sampling conditions and test methods for mecHAnical properties tests 钢锻件-力学性能试验的检测频次、取样条件和试验方法 |
China National Standards HA |
English PDF |
| GB/T 43723-2024 |
Performance requirements for semi-integrated LED lamps with a power supply voltage not greater tHAn 50V AC effective value or 120V DC without ripple for general lighting 普通照明用电源电压不大于交流有效值50V或无纹波直流120V的半集成式LED灯-性能要求 |
China National Standards HA |
English PDF |
| GB/T 39560.12-2024 |
Determination of certain substances in electronic and electrical products-Part 12: Simultaneous determination of polybrominated biphenyls, polybrominated diphenyl ethers and phtHAlates in polymers by gas chromatography-mass spectrometry 电子电气产品中某些物质的测定-第12部分：气相色谱-质谱法同时测定聚合物中的多溴联苯、多溴二苯醚和邻苯二甲酸酯 |
China National Standards HA |
English PDF |
| GB/T 28478-2024 |
General technical conditions for outdoor furniture - tables and cHAirs 户外家具-桌椅类通用技术条件 |
China National Standards HA |
English PDF |
| GB/T 19822-2024 |
Specifications for HArd anodized films of aluminum and aluminum alloys 铝及铝合金硬质阳极氧化膜规范 |
China National Standards HA |
English PDF |
| GB/T 18029.22-2024 |
WheelcHAirs - Part 22: Adjustment procedures 轮椅车-第22部分：调节程序 |
China National Standards HA |
English PDF |
| GB/T 18029.8-2024 |
WheelcHAirs - Part 8: Requirements and test methods for static strength, impact strength and fatigue strength 轮椅车-第8部分：静态强度、冲击强度及疲劳强度的要求和测试方法 |
China National Standards HA |
English PDF |
| GB/T 18029.1-2024 |
WheelcHAirs - Part 1: Determination of static stability 轮椅车-第1部分：静态稳定性的测定 |
China National Standards HA |
English PDF |
| GB/T 15597.2-2024 |
Plastics - Polymethyl metHAcrylate (PMMA) - Molding and extrusion materials - Part 2: Preparation of specimens and performance determination 塑料-聚甲基丙烯酸甲酯（PMMA）-模塑和挤出材料-第2部分：试样制备和性能测定 |
China National Standards HA |
English PDF |
| GB/T 15597.1-2024 |
Plastics - Polymethyl metHAcrylate (PMMA) molding and extrusion materials - Part 1: Nomenclature system and classification basis 塑料-聚甲基丙烯酸甲酯（PMMA）模塑和挤出材料-第1部分：命名系统和分类基础 |
China National Standards HA |
English PDF |
| GB/T 5169.23-2024 |
Fire HAzard tests for electrical and electronic products - Part 23: Test flame - 500W vertical flame test method for polymer tubular materials 电工电子产品着火危险试验-第23部分：试验火焰-聚合物管形材料500W垂直火焰试验方法 |
China National Standards HA |
English PDF |
| GB-18584-2024 |
Limits of HArmful substances in furniture 家具中有害物质限量 |
China National Standards HA |
English PDF |
| GB/T 44122-2024 |
Industrial Internet platform - Industrial mecHAnism model development guide 工业互联网平台-工业机理模型开发指南 |
China National Standards HA |
English PDF |
| GB/T 13305-2024 |
Determination method of α-pHAse content in stainless steel 不锈钢中α-相含量测定法 |
China National Standards HA |
English PDF |
| GB/T 28843-2024 |
Food cold cHAin logistics traceability management requirements 食品冷链物流追溯管理要求 |
China National Standards HA |
English PDF |
| GB/T 44050.2-2024 |
Hydraulic transmission-Determination of oil noise cHAracteristics-Part 2: Measurement of oil sound velocity in pipelines 液压传动-油液噪声特性测定-第2部分：管道中油液声速的测量 |
China National Standards HA |
English PDF |
| GB/T 44050.1-2024 |
Hydraulic transmission-Determination of oil noise cHAracteristics-Part 1 Division: General rules- 液压传动-油液噪声特性测定-第1部分：通则- |
China National Standards HA |
English PDF |
| GB/T 17699.1-2024 |
Electronic data excHAnge for administration, commerce and transportation-Part 1: Data element directory 行政、商业和运输业电子数据交换-第1部分：数据元目录 |
China National Standards HA |
English PDF |
| GB/T 17699.2-2024 |
Electronic data excHAnge for administration, commerce and transportation-Part 2: Composite data element directory 行政、商业和运输业电子数据交换-第2部分：复合数据元目录 |
China National Standards HA |
English PDF |
| GB/T 17699.3-2024 |
Electronic data excHAnge for administration, commerce and transportation-Part 3: Segment directory 行政、商业和运输业电子数据交换-第3部分：段目录 |
China National Standards HA |
English PDF |
| GB/T 44051-2024 |
Non-destructive testing of welds-PHAse-controlled array ultrasonic testing of thin-walled steel components-Acceptance levels 焊缝无损检测-薄壁钢构件相控阵超声检测-验收等级 |
China National Standards HA |
English PDF |
| GB/T 9536.1-2024 |
ElectromecHAnical switches for electrical and electronic equipment-Part 1: General specifications 电气和电子设备用机电开关-第1部分：总规范 |
China National Standards HA |
English PDF |
| GB/T 44052-2024 |
Hydraulic transmission-Filters-Identification of performance cHAracteristics 液压传动-过滤器-性能特性的标识 |
China National Standards HA |
English PDF |
| GB/T 17105-2024 |
Classification of aluminum silicon dense sHAped refractory products 铝硅系致密定形耐火制品分类 |
China National Standards HA |
English PDF |
| GB/T 30757-2024 |
Carbon content 7% ~50% alkaline dense sHAped refractory products classification 碳含量7%～50%的碱性致密定形耐火制品分类 |
China National Standards HA |
English PDF |
| GB/T 7939.2-2024 |
Hydraulic transmission connection - Test method - Part 2: Quick-cHAnge connector 液压传动连接-试验方法-第2部分：快换接头 |
China National Standards HA |
English PDF |
| GB/T 44027.1-2024 |
Carbon material determination methods - Part 1: Determination of first discHArge specific capacity, first coulomb efficiency, and retention rate of discharge capacity at different rates 炭材料测定方法-第1部分：首次放电比容量、首次库仑效率、不同倍率放电容量保持率的测定 |
China National Standards HA |
English PDF |
| GB/T 44126.2-2024 |
Road vehicles - Roller brake test bench test method for brake systems of vehicles with a maximum allowable total mass of more tHAn 3.5t - Part 2: Air-over-liquid and pure hydraulic brake systems 道路车辆-最大允许总质量3.5t以上车辆制动系统滚筒制动试验台台架试验方法-第2部分：气顶液和纯液压制动系统 |
China National Standards HA |
English PDF |
| GB/T 44043-2024 |
Passenger cars - Free steering cHAracteristics - Steering release open-loop test method 乘用车-自由转向特性-转向释放开环试验方法 |
China National Standards HA |
English PDF |
| GB/T 13880-2024 |
Road vehicles-Drawbar-IntercHAngeability 道路车辆-牵引座-互换性 |
China National Standards HA |
English PDF |
| GB/T 44041-2024 |
Road vehicles-40 mm drawbar hook-IntercHAngeability 道路车辆-40毫米牵引杆挂环-互换性 |
China National Standards HA |
English PDF |
| GB/T 15692-2024 |
PHArmaceutical machinery-Terminology 制药机械-术语 |
China National Standards HA |
English PDF |
| GB/T 18449.1-2024 |
Metallic materials-Knoop HArdness test-Part 1:-Test method 金属材料-努氏硬度试验-第1部分:-试验方法 |
China National Standards HA |
English PDF |
| GB/T 4340.1-2024 |
Metallic materials-Vickers HArdness test-Part 1:-Test method 金属材料-维氏硬度试验-第1部分:-试验方法 |
China National Standards HA |
English PDF |
| GB/T 44075-2024 |
Nanotechnology-surface enHAnced Raman solid-phase substrate uniformity measurement-Raman imaging analysis method 纳米技术-表面增强拉曼固相基片均匀性测量-拉曼成像分析法 |
China National Standards HA |
English PDF |
| GB/T 1243-2024 |
Short pitch precision roller cHAins, bushing chains, accessories and sprockets for transmission 传动用短节距精密滚子链、套筒链、附件和链轮 |
China National Standards HA |
English PDF |
| GB/T 44130.1-2024 |
Electric vehicle cHArging and swapping service information exchange - Part 1: General 电动汽车充换电服务信息交换-第1部分:总则 |
China National Standards HA |
English PDF |
| GB-31830-2024 |
Energy consumption limit per unit product for toluene diisocyanate and diphenylmetHAne diisocyanate 甲苯二异氰酸酯和二苯基甲烷二异氰酸酯单位产品能源消耗限额 |
China National Standards HA |
English PDF |
| GB-21257-2024 |
Energy consumption limits per unit product of caustic soda, polyvinyl chloride resin and metHAne chloride 烧碱、聚氯乙烯树脂和甲烷氯化物单位产品能源消耗限额 |
China National Standards HA |
English PDF |
| GB/Z 29014.3-2024 |
Cut Cutting tool data expression and excHAnge - Part 3: Tool project reference dictionary 切削刀具数据表达与交换-第3部分：刀具项目参考字典 |
China National Standards HA |
English PDF |
| GB/T 17215.302-2024 |
Electrical measuring equipment (AC) - Particular requirements - Part 2: Static HArmonic active energy meters 电测量设备（交流）-特殊要求-第2部分：静止式谐波有功电能表 |
China National Standards HA |
English PDF |
| GB/T 18891-2024 |
Clock timing number identification of pHAse difference in three-phase AC system 三相交流系统相位差的钟时序数标识 |
China National Standards HA |
English PDF |
| GB/T 20790-2024 |
Semi-feed combine HArvesters - Technical conditions 半喂入联合收割机-技术条件 |
China National Standards HA |
English PDF |
| GB/T 23561.11-2024 |
Methods for determination of physical and mecHAnical properties of coal and rock - Part 11: Determination of shear strength of coal and rock 煤和岩石物理力学性质测定方法-第11部分：煤和岩石抗剪强度测定方法 |
China National Standards HA |
English PDF |
| GB/T 23561.1-2024 |
Methods for determination of physical and mecHAnical properties of coal and rock - Part 1: General provisions for sampling 煤和岩石物理力学性质测定方法-第1部分：采样一般规定 |
China National Standards HA |
English PDF |
| GB/T 24675.1-2024 |
Conservation tillage machinery - Part 1: - SHAllow tillage machine 保护性耕作机械-第1部分：-浅松机 |
China National Standards HA |
English PDF |
| GB/T 2820.9-2024 |
Alternating current generator sets driven by reciprocating internal combustion engines - Part 9: Measurement and evaluation of mecHAnical vibrations 往复式内燃机驱动的交流发电机组-第9部分：机械振动的测量和评价 |
China National Standards HA |
English PDF |
| GB/T 3880.2-2024 |
Aluminium and aluminium alloy plates and strips for general industrial use - Part 2: MecHAnical properties 一般工业用铝及铝合金板、带材-第2部分：力学性能 |
China National Standards HA |
English PDF |
| GB/T 40344.3-2024 |
Vacuum technology - Standard methods for measuring the performance of vacuum pumps - Part 3: Specific parameters for mecHAnical booster pumps 真空技术-真空泵性能测量标准方法-第3部分：机械增压泵的特定参数 |
China National Standards HA |
English PDF |
| GB/T 40565.1-2024 |
Hydraulic transmission connections - Quick-cHAnge connectors - Part 1: General type 液压传动连接-快换接头-第1部分：通用型 |
China National Standards HA |
English PDF |
| GB/T 4074.3-2024 |
Test methods for winding wires - Part 3: MecHAnical properties 绕组线试验方法-第3部分：机械性能 |
China National Standards HA |
English PDF |
| GB/T 43259.556-2024 |
Energy management system application program interface (EMS-API) Part 556: Based on CIM graphics excHAnge format (CIM/G) 能量管理系统应用程序接口（EMS-API）第556部分：基于CIM图形交换格式（CIM/G） |
China National Standards HA |
English PDF |
| GB/T 43698-2024 |
Cybersecurity technology-Software supply cHAin security requirements 网络安全技术-软件供应链安全要求 |
China National Standards HA |
English PDF |
| GB/T 43882-2024 |
Odorless aspHAlt concrete 净味沥青混凝土 |
China National Standards HA |
English PDF |
| GB/T 43891-2024 |
Non-metallic chemical equipment - Test method for heat transfer coefficient and flow resistance performance of impermeable graphite heat excHAngers 非金属化工设备-不透性石墨换热器传热系数和流阻性能测试方法 |
China National Standards HA |
English PDF |
| GB/T 43899-2024 |
Pig iron - Determination of multi-element content - Spark discHArge atomic emission spectrometry (conventional method) 生铁-多元素含量的测定-火花放电原子发射光谱法（常规法） |
China National Standards HA |
English PDF |
| GB/T 43900-2024 |
Nondestructive testing of steel products - Ultrasonic testing method for torsional residual stress distribution of sHAft components 钢产品无损检测-轴类构件扭转残余应力分布状态超声检测方法 |
China National Standards HA |
English PDF |
| GB/T 43902-2024 |
Green manufacturing - Green supply cHAin management of manufacturing enterprises - Implementation guide 绿色制造-制造企业绿色供应链管理-实施指南 |
China National Standards HA |
English PDF |
| GB/T 43903-2024 |
Green manufacturing - Green supply cHAin management of manufacturing enterprises - Information traceability and disclosure requirements 绿色制造-制造企业绿色供应链管理-信息追溯及披露要求 |
China National Standards HA |
English PDF |
| GB/T 43938.1-2024 |
Test method for mecHAnical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 1: Tensile test 碳纤维增强复合材料薄壁管件力学性能试验方法-第1部分：拉伸试验 |
China National Standards HA |
English PDF |
| GB/T 43938.2-2024 |
Test method for mecHAnical properties of thin-walled pipes of carbon fiber reinforced composite materials-Part 2: Compression test 碳纤维增强复合材料薄壁管件力学性能试验方法-第2部分：压缩试验 |
China National Standards HA |
English PDF |
| GB/T 43947-2024 |
General technical requirements for low-speed wire-controlled cHAssis 低速线控底盘通用技术要求 |
China National Standards HA |
English PDF |
| GB/T 43976-2024 |
Electronic gas - tetrafluorometHAne 电子气体-四氟甲烷 |
China National Standards HA |
English PDF |
| GB/T 43997.1-2024 |
Surface Temperature Thermal Infrared Remote Sensing Inversion - Part 1: Single CHAnnel Method 地表温度热红外遥感反演-第1部分：单通道法 |
China National Standards HA |
English PDF |
| GB/T 44003-2024 |
MecHAnical Property Measurement - Test Method for Delamination Strength of REBCO Coated Conductors (Copper Plating) 力学性能测量-REBCO涂层导体（镀铜）脱层强度测试方法 |
China National Standards HA |
English PDF |
| GB/T 44004-2024 |
Nanotechnology - Test Methods for CHAracterization of Organic Transistors and Materials 纳米技术-有机晶体管和材料表征试验方法 |
China National Standards HA |
English PDF |
| GB/T 4701.12-2024 |
Ferrotitanium - Determination of titanium content - Diantipyryl metHAne spectrophotometry 钛铁-钛含量的测定-二安替吡啉甲烷分光光度法 |
China National Standards HA |
English PDF |
| GB/T 28952-2024 |
China Forest Certification-CHAin of Custody 中国森林认证-产销监管链 |
China National Standards HA |
English PDF |
| GB/T 23561.8-2024 |
Methods for determination of physical and mecHAnical properties of coal and rock - Part 8: Methods for determination of deformation parameters of coal and rock 煤和岩石物理力学性质测定方法-第8部分：煤和岩石变形参数测定方法 |
China National Standards HA |
English PDF |
| GB/T 43791-2024 |
International trade business process specification - data pipeline carrier - data excHAnge architecture 国际贸易业务流程规范-数据管道载体-数据交换架构 |
China National Standards HA |
English PDF |
| GB/T 22076-2024 |
Pneumatics - Cylindrical quick-cHAnge connectors 气动-圆柱形快换接头 |
China National Standards HA |
English PDF |
| GB/T 15843.4-2024 |
Information technology - Security technology - Entity authentication - Part 4: MecHAnisms using cryptographic check functions 信息技术-安全技术-实体鉴别-第4部分：采用密码校验函数的机制 |
China National Standards HA |
English PDF |
| GB/T 17903.3-2024 |
Information technology - Security technology - Non-repudiation - Part 3: MecHAnisms using asymmetric technology 信息技术-安全技术-抗抵赖-第3部分：采用非对称技术的机制 |
China National Standards HA |
English PDF |
| GB/T 37364.2-2024 |
Technical regulations for surveying terrestrial wildlife and their HAbitats-Part 2: Survey zoning 陆生野生动物及其栖息地调查技术规程-第2部分：调查区划 |
China National Standards HA |
English PDF |
| GB/T 37364.3-2024 |
Technical regulations for surveying terrestrial wildlife and their HAbitats-Part 3: Mammals 陆生野生动物及其栖息地调查技术规程-第3部分：兽类 |
China National Standards HA |
English PDF |
| GB/T 37364.4-2024 |
Technical regulations for surveying terrestrial wildlife and their HAbitats-Part 4: Birds 陆生野生动物及其栖息地调查技术规程-第4部分：鸟类 |
China National Standards HA |
English PDF |
| GB/T 23897-2024 |
Post-HArvest treatment of major cut flower products Technical regulations for management 主要切花产品采后处理技术规程 |
China National Standards HA |
English PDF |
| GB/T 20042.6-2024 |
Proton excHAnge membrane fuel cells - Part 6 ：Test methods for bipolar plate characteristics 质子交换膜燃料电池-第6部分：双极板特性测试方法 |
China National Standards HA |
English PDF |
| GB/T 23751.3-2024 |
Micro fuel cell power generation systems - Part 3: IntercHAngeability of fuel containers 微型燃料电池发电系统-第3部分：燃料容器互换性 |
China National Standards HA |
English PDF |
| GB/T 43828.1-2024 |
Printing technology - Prepress data excHAnge - Color scale for input scanner calibration - Part 1: Color scale for input scanner calibration 印刷技术-印前数据交换-输入扫描仪校准用色标-第1部分：输入扫描仪校准用色标 |
China National Standards HA |
English PDF |
| GB/T 43835-2024 |
Printing technology - Prepress data excHAnge - Preparation and visualization of RGB images for use in RGB-based printing workflows 印刷技术-印前数据交换-基于RGB印刷工作流程中使用RGB图像的准备和可视化 |
China National Standards HA |
English PDF |
| GB/T 18721.5-2024 |
Printing technology - Prepress data excHAnge - Part 5: Scene-related standard colour image data - (RIMM/SCID) 印刷技术-印前数据交换-第5部分：场景相关的标准彩色图像数据-（RIMM/SCID） |
China National Standards HA |
English PDF |
| GB/T 29899-2024 |
Test method for the release of volatile organic compounds in artificial boards and their products-Small release cHAmber method 人造板及其制品中挥发性有机化合物释放量试验方法-小型释放舱法 |
China National Standards HA |
English PDF |
| GB/T 43809-2024 |
Technical requirements for the preparation of cHAracteristic profiles of plant extract feed additives 植物提取物类饲料添加剂特征图谱制定技术要求 |
China National Standards HA |
English PDF |
| GB/T 43657.3-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 3: Container HAndlers 工业车辆能效-试验方法-第3部分：集装箱搬运车 |
China National Standards HA |
English PDF |
| GB/T 43784-2024 |
Performance cHAracterization and measurement method of single photon source 单光子源性能表征及测量方法 |
China National Standards HA |
English PDF |
| GB/T 43785-2024 |
Performance cHAracterization and measurement method of optical clock 光钟性能表征及测量方法 |
China National Standards HA |
English PDF |
| GB/T 43718-2024 |
HAnd sanitizer 免洗洗手液 |
China National Standards HA |
English PDF |
| GB/T 18721.3-2024 |
Printing technology - prepress data excHAnge - Part 3: - CIELAB standard color image data (CIELAB/SCID) 印刷技术-印前数据交换-第3部分：-CIELAB标准彩色图像数据（CIELAB/SCID） |
China National Standards HA |
English PDF |
| GB/T 18721.4-2024 |
Printing technology - prepress data excHAnge - Part 4: Wide color gamut standard color image data for display - [Adobe-RGB- (1998) / SCID] 印刷技术-印前数据交换-第4部分：显示用宽色域标准彩色图像数据-[Adobe-RGB-（1998）/SCID] |
China National Standards HA |
English PDF |
| GB/Z 43728.200-2024 |
Power system management and information excHAnge-Part 1 : Reference architecture 电力系统管理及其信息交换-第200部分：从互联网协议版本4-（IPv4）-到互联网协议版本6-（IPv6）-的迁移指南 |
China National Standards HA |
English PDF |
| GB/T 15153.1-2024 |
Power system management and information excHAnge-Part 200: Migration guide from Internet Protocol version 4-(IPv4)-to Internet Protocol version 6-(IPv6)- 远动设备及系统-第2部分：工作条件-第1篇：电源和电磁兼容性 |
China National Standards HA |
English PDF |
| GB/T 1504-2024 |
Information technology-Remote communication and information excHAnge between systems-Visual networking system requirements 铸铁轧辊 |
China National Standards HA |
English PDF |
| GB/T 43654-2024 |
Determination of styrene and 2-chloroetHAnol in cell culture medium-Gas chromatography-mass spectrometry (GC-MS) method 智能化立磨粉磨系统-技术要求 |
China National Standards HA |
English PDF |
| GB/T 40753.3-2024 |
Supply CHAin Security Management System-ISO-28000 Implementation Guide-Part 4: Additional specific guidelines for the implementation of ISO-28000 with compliance to GB/T-38702 as the management target 供应链安全管理体系-ISO-28000实施指南-第3部分：中小企业采用ISO-28000的附加特定指南（海港除外） |
China National Standards HA |
English PDF |
| GB/T 43632-2024 |
Supply CHAin Security Management System-ISO-28000 Implementation Guide-Part 3: Additional specific guidelines for the adoption of ISO-28000 by small and medium-sized enterprises (excluding seaports) 供应链安全管理体系-供应链韧性的开发-要求及使用指南 |
China National Standards HA |
English PDF |
| GB/T 43756-2024 |
Supply cHAin security management system-Development of supply chain resilience-Requirements and use =Guidelines for use 叉车设计规范 |
China National Standards HA |
English PDF |
| Find out:6835Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 |
+86-755-25831330
