China Plastic GB Standards English PDF List

GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.

China "Plastic" GB Standards English PDF List:

Standard Code	Standard Title	Standard Class	Order
GB/T 1665-2008	Plasticizers - Determination of saponification value and ester-content 增塑剂皂化值及酯含量的测定	China National Standards Plastic	English PDF
GB/T 1660-2008	Determinating the kincmatic viscosity of Plasticizers 增塑剂运动黏度的测定	China National Standards Plastic	English PDF
GB/T 14522-2008	Artificial weathering test method for Plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps 机械工业产品用塑料、涂料、橡胶材料人工气候老化试验方法荧光紫外灯	China National Standards Plastic	English PDF
GB/T 9870.2-2008	Rubber, vulcanized or thermoPlastic - Determination of dynamic properties - Part 2:Torsion pendulum methods at low frequencies 硫化橡胶或热塑性橡胶动态性能的测定第2部分：低频扭摆法	China National Standards Plastic	English PDF
GB/T 9267-2008	Emulsions for coatings and polymer dispersions for coatings and Plastics - Determination of white point temperature and minimum film-forming temperature 涂料用乳液和涂料、塑料用聚合物分散体白点温度和最低成膜温度的测定	China National Standards Plastic	English PDF
GB/T 6743-2008	Plastics(polyester resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value 塑料用聚酯树脂、色漆和清漆用漆基部分酸值和总酸值的测定	China National Standards Plastic	English PDF
GB/T 533-2008	Rubber,vulcanized or thermoPlastic - Determination of density 硫化橡胶或热塑性橡胶密度的测定	China National Standards Plastic	English PDF
GB/T 532-2008	Rubber, vulcanized or thermoPlastic - Determination of adhesion to textile fabric 硫化橡胶或热塑性橡胶与织物粘合强度的测定	China National Standards Plastic	English PDF
GB/T 531.1-2008	Rubber, vulcanized or thermoPlastic - Determination of indentation hardness - Part 1：Duromerer method （Shore hardness）硫化橡胶或热塑性橡胶压入硬度试验方法第1部分：邵氏硬度计法（邵尔硬度）	China National Standards Plastic	English PDF
GB/T 529-2008	Rubber,vulcanized or thermoPlastic - Determination of tear strength（Trouser，angle and crescent test pieces）硫化橡胶或热塑性橡胶撕裂强度的测定（裤形、直角形和新月形试样）	China National Standards Plastic	English PDF
GB/T 21991-2008	Plastics - Preparation of PVC paste for test purpose - Planetary-mixer method 塑料试验用聚氯乙烯（PVC）糊的制备行星混合器法	China National Standards Plastic	English PDF
GB/T 21989-2008	Plastics - Poly(vinyl chloride)pastes - Determination of apparent viscosity using the severs rheometer 塑料聚氯乙烯糊用Severs流变仪测定表观黏度	China National Standards Plastic	English PDF
GB/T 21988-2008	Plastics-Vinyl chloride homopolymer and copolymer resins-Sieve analysis in water 塑料氯乙烯均聚和共聚树脂水中筛分析	China National Standards Plastic	English PDF
GB/T 1668-2008	Plasticizers - Determination of acid value and acidity 增塑剂酸值及酸度的测定	China National Standards Plastic	English PDF
GB/T 16613-2008	Plastics - Preparation of PVC pastes for test purposes - Dissolver method 塑料试验用聚氯乙烯（PVC）糊的制备分散器法	China National Standards Plastic	English PDF
GB/T 12830-2008	Rubber，vulcanized or thermoPlastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶与刚性板剪切模量和粘合强度的测定四板剪切法	China National Standards Plastic	English PDF
GB/T 21928-2008	Determination of phthalate esters in food Plastic packaging materials 食品塑料包装材料中邻苯二甲酸酯的测定	China National Standards Plastic	English PDF
GB/T 9348-2008	Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles 塑料聚氯乙烯树脂杂质与外来粒子数的测定	China National Standards Plastic	English PDF
GB/T 2914-2008	Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) 塑料氯乙烯均聚和共聚树脂挥发物(包括水)的测定	China National Standards Plastic	English PDF
GB/T 21843-2008	Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving 塑料氯乙烯均聚和共聚树脂用机械筛测定粒径	China National Standards Plastic	English PDF
GB/T 1685-2008	Rubber，vulcanized or thermoPlastic - Determination of stress relaxation in compression at ambient and at elevated temperatures 硫化橡胶或热塑性橡胶在常温和高温下压缩应力松弛的测定	China National Standards Plastic	English PDF
GB/T 9900-2008	Rubber - or Plastics-coated fabrics - Ventilation ducting 橡胶或塑料涂覆织物导风筒	China National Standards Plastic	English PDF
GB/T 21874-2008	Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - ThermoPlastic elastomers 弹性体密封件排水管道接口密封件材料要求热塑性弹性体	China National Standards Plastic	English PDF
GB/T 21283.5-2008	Rotary shaft lip-type seals incorporating thermoPlastic sealing elements - Part 5: Identification of visual imperfections 密封元件为热塑性材料的旋转轴唇形密封圈第5部分外观缺陷的识别	China National Standards Plastic	English PDF
GB/T 21283.4-2008	Rotary shaft lip-type seals incorporating thermoPlastic sealing elements - Part 4: Performance test procedures 密封元件为热塑性材料的旋转轴唇形密封圈第4部分：性能试验程序	China National Standards Plastic	English PDF
GB/T 21283.3-2008	Rotary shaft lip-type seals incorporating thermoPlastic sealing elements - Part 3 :Storage，handling and installation 密封元件为热塑性材料的旋转轴唇形密封圈第3部分：贮存、搬运和安装	China National Standards Plastic	English PDF
GB/T 15907-2008	Rubber and Plastics hoses - Method of test for flammability 橡胶和塑料软管可燃性试验方法	China National Standards Plastic	English PDF
GB/T 12722-2008	Rubber and Plastics hose assemblies - Flexing combined with hydraulic impulse test（half-omega test）橡胶和塑料软管组合件液压脉冲曲挠试验（半Ω试验）	China National Standards Plastic	English PDF
GB/T 12584-2008	Rubber or Plastics coated fabrics - Low-temperature impact test 橡胶或塑料涂覆织物低温冲击试验	China National Standards Plastic	English PDF
GB/T 17748-2008	Aluminium-Plastic composite panel for curtain wall 建筑幕墙用铝塑复合板	China National Standards Plastic	English PDF
GB/T 21662-2008	The puick testing method and evaluation for Plastic shopping bags 塑料购物袋的快速检测方法与评价	China National Standards Plastic	English PDF
GB/T 21661-2008	Plastic shopping bags 塑料购物袋	China National Standards Plastic	English PDF
GB 21660-2008	The general requirement for environmental protection, safety, identification and marking of Plastic shopping bags 塑料购物袋的环保、安全和标识通用技术要求	China National Standards Plastic	English PDF
GB/T 16288-2008	Marking of Plastics products 塑料制品的标志	China National Standards Plastic	English PDF
GB/T 21529-2008	Determination of water vapour transmission rate for Plastic film and sheeting - Electrolytic detection sensor method 塑料薄膜和薄片水蒸气透过率的测定电解传感器法	China National Standards Plastic	English PDF
GB/T 18943-2008	Cellular rubbers and Plastics - Determination of dynamic cushioning performance 多孔橡胶与塑料动态缓冲性能测定	China National Standards Plastic	English PDF
GB/T 9871-2008	Rubber，vulcanized or thermoPlastic-Determination of aging characteristics by measurement of stress relaxation 硫化橡胶或热塑性橡胶老化性能的测定拉伸应力松弛试验	China National Standards Plastic	English PDF
GB/T 9867-2008	Rubber, vulcanized or thermoPlastic-Determination of abrasion resistance using a rotating cylindrical drum device 硫化橡胶或热塑性橡胶耐磨性能的测定（旋转辊筒式磨耗机法）	China National Standards Plastic	English PDF
GB/T 3511-2008	Rubber, vulcanized or thermoPlastic - Resistance to weathering 硫化橡胶或热塑性橡胶耐候性	China National Standards Plastic	English PDF
GB/T 21526-2008	Structural adhesives - Guidelines for the surface preparation of metals and Plastics prior to adhesive bonding 结构胶粘剂粘接前金属和塑料表面处理导则	China National Standards Plastic	English PDF
GB/T 4219.1-2008	Plastics piping system for industrial applications - Unplasticized poly(vinyl chloride)(PVC-U) - Specifications for components and the system - Part 1: Pipes 工业用硬聚氯乙烯(PVC-U)管道系统第1部分：管材	China National Standards Plastic	English PDF
GB/T 21558-2008	Rigid polyurethane cellular Plastics used in the thermal insulation of building 建筑绝热用硬质聚氨酯泡沫塑料	China National Standards Plastic	English PDF
GB/T 17689-2008	Geosynthetics - Plastic geogrids 土工合成材料塑料土工格栅	China National Standards Plastic	English PDF
GB/T 21492-2008	Glass fiber reinforced Plastics jacking pipe 玻璃纤维增强塑料顶管	China National Standards Plastic	English PDF
GB/T 21461.2-2008	Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料超高分子量聚乙烯(PE-UHMW)模塑和挤出材料第2部分: 试样制备和性能测定	China National Standards Plastic	English PDF
GB/T 21460.2-2008	Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料苯乙烯-丙烯腈(SAN)模塑和挤出材料第2部分: 试样制备和性能测定	China National Standards Plastic	English PDF
GB/T 8813-2008	Rigid cellular Plastics - Determination of compression properties 硬质泡沫塑料压缩性能的测定	China National Standards Plastic	English PDF
GB/T 8811-2008	Test method for dimensional stability of rigid cellular Plastics 硬质泡沫塑料尺寸稳定性试验方法	China National Standards Plastic	English PDF
GB/T 21333-2008	Cellular Plastics,rigid - Test methods for self-skinned,high-density materials 硬质泡沫塑料自结皮高密度材料试验方法	China National Standards Plastic	English PDF
GB/T 21332-2008	Rigid cellular Plastics - Determination of water vapour transmission properties 硬质泡沫塑料水蒸气透过性能的测定	China National Standards Plastic	English PDF
GB/T 19812.3-2008	Plastic equipment for water saving irrigation - Drip pipe and tape inlaid with emitters inside 塑料节水灌溉器材内镶式滴灌管、带	China National Standards Plastic	English PDF
GB/T 10799-2008	Rigid cellular Plastics - Determination of the volume percentage of open cells and of closed cells 硬质泡沫塑料开孔和闭孔体积百分率的测定	China National Standards Plastic	English PDF
GB/T 21283.2-2007	Rotary shaft lip-type seals incorporating thermoPlastic sealing element - Part 2：Vocabulary 密封元件为热塑性材料的旋转轴唇形密封圈第2部分：词汇	China National Standards Plastic	English PDF
GB/T 21283.1-2007	Rotary shaft lip-type seals incorporating thermoPlastic sealing elements－Part 1: Nominal dimensions and tolerances 密封元件为热塑性材料的旋转轴唇形密封圈第1部分：基本尺寸和公差	China National Standards Plastic	English PDF
GB/T 21282-2007	Rubber/Plastics weatherstrip for automobile 乘用车用橡塑密封条	China National Standards Plastic	English PDF
GB/T 8812.2-2007	Rigid cellular Plastics - Determination of flexural properties - Part 2: Determination of flexural strength and apparent flexural modulus of elasticity 硬质泡沫塑料弯曲性能的测定第2部分: 弯曲强度和表观弯曲弹性模量的测定	China National Standards Plastic	English PDF
GB/T 8812.1-2007	Rigid cellular Plastics - Determination of flexural properties - Part 1: Basic bending test 硬质泡沫塑料弯曲性能的测定第1部分：基本弯曲试验	China National Standards Plastic	English PDF
GB/T 8801-2007	Test method for unPlasticized polyvinyl chloride(PVC-U)fittings by falling 硬聚氯乙烯（PVC-U）管件坠落试验方法	China National Standards Plastic	English PDF
GB/T 21300-2007	Plastics pipes and fittings - Determination of opacity 塑料管材和管件不透光性的测定	China National Standards Plastic	English PDF
GB/T 18477.1-2007	UnPlasticized polyvinyl chloride (PVC-U) structure wall pipline system for underground soil waste and drainage - Part 1: double wall corrugated pipes 埋地排水用硬聚氯乙烯(PVC-U)结构壁管道系统第1部分：双壁波纹管材	China National Standards Plastic	English PDF
GB/T 13526-2007	UnPlasticized polyvinyl chloride(PVC-U) pipes dichloromethane resistance test method 硬聚氯乙烯(PVC-U) 管材二氯甲烷浸渍试验方法	China National Standards Plastic	English PDF
GB/T 3048.3-2007	Test methods for electrical properties of electric cables and wires - Part 3：Test of volume resistivity of semi-conducting rubbers and Plastics 电线电缆电性能试验方法第3部分：半导电橡塑材料体积电阻率试验	China National Standards Plastic	English PDF
GB/T 21189-2007	Verification of pendulum impact-testing machines used for Charpy, lzod and tensile impact-testing of Plastics 塑料简支梁、悬臂梁和拉伸冲击试验用摆锤冲击试验机的检验	China National Standards Plastic	English PDF
GB/T 21239-2007	Test method for compression after impact properties of fiber reinforced Plastic laminates 纤维增强塑料层合板冲击后压缩性能试验方法	China National Standards Plastic	English PDF
GB/T 21238-2007	Glass fiber reinforced Plastics mortar pipes 玻璃纤维增强塑料夹砂管	China National Standards Plastic	English PDF
GB/T 1725-2007	Paints,varnishes and Plastics - Determination of non-volatile-matter content 色漆、清漆和塑料不挥发物含量的测定	China National Standards Plastic	English PDF
GB/T 5027-2007	Metallic materials - Sheet and strip - Determination of Plastic strain ratio 金属材料薄板和薄带塑性应变比（r值）的测定	China National Standards Plastic	English PDF
GB/T 2916-2007	Plastic - Vinyl chloride homopolymer and copolymer resins - Sieve analysis using air-jet sieve apparatus 塑料氯乙烯均聚和共聚树脂用空气喷射筛装置的筛分析	China National Standards Plastic	English PDF
GB/T 21060-2007	Plastics - Determination of pourability 塑料流动性的测定	China National Standards Plastic	English PDF
GB/T 21059-2007	Plastics - polymers/resins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate 塑料液态或乳液态或分散体系聚合物/树脂用旋转黏度计在规定剪切速率下黏度的测定	China National Standards Plastic	English PDF
GB/T 14663-2007	Specification of Plastic packaging moulds 塑封模技术条件	China National Standards Plastic	English PDF
GB/T 328.9-2007	Test methods for building sheets for waterproofing - Part 9: Plastic and rubber sheets for waterproofing-tensile properties 建筑防水卷材试验方法第9部分：高分子防水卷材拉伸性能	China National Standards Plastic	English PDF
GB/T 328.7-2007	Test methods for building sheets for waterproofing - Part 7: Plastic and rubber sheets for waterproofing-length,width,straightness and flatness 建筑防水卷材试验方法第7部分：高分子防水卷材长度、宽度、平直度和平整度	China National Standards Plastic	English PDF
GB/T 328.5-2007	Test methods for building sheets for waterproofing - Part 5: Plastic and rubber sheets for waterproofing-thickness and mass per unit area 建筑防水卷材试验方法第5部分：高分子防水卷材厚度、单位面积质量	China National Standards Plastic	English PDF
GB/T 328.3-2007	Test methods for building sheets for waterproofing - Part 3: Plastic and rubber sheets for waterproofing-visible defects 建筑防水卷材试验方法第3部分：高分子防水卷材外观	China National Standards Plastic	English PDF
GB/T 328.27-2007	Test methods for building sheets for waterproofing - Part 27: Bitumen,Plastic and rubber sheets for waterproofing-water absorption 建筑防水卷材试验方法第27部分：沥青和高分子防水卷材吸水性	China National Standards Plastic	English PDF
GB/T 328.25-2007	Test methods for building sheets for waterproofing - part 25: Bitumen,Plastic and rubber sheets for waterproofing-resistance to static loading 建筑防水卷材试验方法第25部分：沥青和高分子防水卷材抗静态荷载	China National Standards Plastic	English PDF
GB/T 328.24-2007	Test methods for building sheets for waterproofing - Part 24: Bitumen,Plastic and rubber sheets for waterproofing-resistance to impact 建筑防水卷材试验方法第24部分：沥青和高分子防水卷材抗冲击性能	China National Standards Plastic	English PDF
GB/T 328.23-2007	Test methods for building sheets for waterproofing - Part 23: Plastic and rubber sheets for waterproofing-resistance to shearing of joints 建筑防水卷材试验方法第23部分：高分子防水卷材接缝剪切性能	China National Standards Plastic	English PDF
GB/T 328.19-2007	Test methods for building sheets for waterproofing - Part 19: Plastic and rubber sheets for waterproofing-resistance to tearing 建筑防水卷材试验方法第19部分：高分子防水卷材撕裂性能	China National Standards Plastic	English PDF
GB/T 328.16-2007	Test methods for building sheets for waterproofing - Part 16: Plastic and rubber sheets for waterproofing-exposure to liquid chemicals including water 建筑防水卷材试验方法第16部分：高分子防水卷材耐化学液体（包括水）	China National Standards Plastic	English PDF
GB/T 328.15-2007	Test methods for building sheets for waterproofing - Part 15: Plastic and rubber sheets for waterproof-foldability at low temperature 建筑防水卷材试验方法第15部分：高分子防水卷材低温弯折性	China National Standards Plastic	English PDF
GB/T 328.13-2007	Test methods for building sheets for waterproofing - Part 13: Plastic and rubber sheets for waterproofing-dimensional stability 建筑防水卷材试验方法第13部分：高分子防水卷材尺寸稳定性	China National Standards Plastic	English PDF
GB/T 328.1-2007	Test methods for building sheets for waterproofing - Part 1: Bitumen,Plastic and rubber sheets for waterproofing-rules for sampling 建筑防水卷材试验方法第1部分：沥青和高分子防水卷材抽样规则	China National Standards Plastic	English PDF
GB/T 328.10-2007	Test methods for building sheets for waterproofing - Part 10: Bitumen,Plastic and rubber sheets for waterproofing-watertightness 建筑防水卷材试验方法第10部分：沥青和高分子防水卷材不透水性	China National Standards Plastic	English PDF
GB/T 20860-2007	Packaging - Sacks made from thermoPlastic flexible film - Tear propagation on edge folds 包装热塑性软质薄膜袋折边处撕裂扩展试验方法	China National Standards Plastic	English PDF
GB/T 20875.1-2007	Method of test the hydrolytic stability of electrical insulating materials - Part 1: Plastic films 电气绝缘材料水解稳定性的试验方法第1部分：塑料薄膜	China National Standards Plastic	English PDF
GB/T 5565-2006	Rubber or Plastics hoses tubing - Bending tests 橡胶或塑料增强软管和非增强软管弯曲试验	China National Standards Plastic	English PDF
GB/T 5564-2006	Rubber and Plastics hoses - Subambient temperature flexibility tests 橡胶及塑料软管低温曲挠试验	China National Standards Plastic	English PDF
GB/T 3510-2006	Rubber，unvulcanized - Determination of Plasticity - Rapid plastimeter method 未硫化胶塑性的测定快速塑性计法	China National Standards Plastic	English PDF
GB/T 13934-2006	Rubber，vulcanized or thermoPlastic - Determination of flex cracking and crack growth(De Mattia) 硫化橡胶或热塑性橡胶屈挠龟裂和裂口增长的测定（德墨西亚型）	China National Standards Plastic	English PDF
GB/T 12828-2006	Rubber，raw and unvalcanized compounded - Determination of Plasticity number and recovery number - Parallel plate method 生胶和未硫化混炼胶塑性值及复原值的测定平行板法	China National Standards Plastic	English PDF
GB/T 4170-2006	Specification of components of injection moulds for Plastics 塑料注射模零件技术条件	China National Standards Plastic	English PDF
GB/T 4169.9-2006	Components of injection moulds for Plastics - Part 9: Stop pin 塑料注射模零件第9部分：限位钉	China National Standards Plastic	English PDF
GB/T 4169.8-2006	Components of injection moulds for Plastics ― Part 8:Mould plate 塑料注射模零件第8部分：模板	China National Standards Plastic	English PDF
GB/T 4169.7-2006	Components of injection moulds for Plastics - Part 7: Ejector plate 塑料注射模零件第7部分：推板	China National Standards Plastic	English PDF
GB/T 4169.6-2006	Components of injection moulds for Plastics - Part 6: Spacer block 塑料注射模零件第6部分：垫块	China National Standards Plastic	English PDF
GB/T 4169.5-2006	Components of injection moulds for Plastics - Part 5: Shouldered guide pillar 塑料注射模零件第5部分：带肩导柱	China National Standards Plastic	English PDF
GB/T 4169.4-2006	Components of injection moulds for Plastics - Part 4: Headed guide pillar 塑料注射模零件第4部分：带头导柱	China National Standards Plastic	English PDF
GB/T 4169.3-2006	Components of injection moulds for Plastics - Part 3: Headed guide bush 塑料注射模零件第3部分：带头导套	China National Standards Plastic	English PDF

Find out:1333Items | To Page of: First -Previous-Next -Last | [5] [6] [7] [8] [9] [10] [11]

- Since 2001 -
Focus on China Standards & Compliance Services

www.gbstandards.org
China National Standards