China National Standards

China Plastic GB Standards English PDF List


GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards;  We provide Chinese GB standards and English version GB standards  Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services.
  •  China "Plastic" GB Standards English PDF List:
  • Standard  Code Standard Title Standard Class Order
    GB/T 19808-2005 Plastics pipes and fittings Peel decohesion test for polyethylene(PE)electrofusion assemblies of nominal outside diameter greater than or equal to 90 mm
    塑料管材和管件 公称外径大于或等于90mm的聚乙烯电熔组件的拉伸剥离试验
    China National Standards
    Plastic

    English PDF
    GB/T 19807-2005 Plastics pipes and fittings Preparation of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting
    塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备
    China National Standards
    Plastic

    English PDF
    GB/T 19806-2005 Plastics pipes and fittings Crushing decohesion test for polyethylene(PE)electrofusion assemblies
    塑料管材和管件 聚乙烯电熔组件的挤压剥离试验
    China National Standards
    Plastic

    English PDF
    GB/T 19712-2005 Plastics pipes and fittings Polyethylene(PE) tapping tees Test method for impact resistance
    塑料管材和管件 聚乙烯(PE)鞍形旁通抗冲击试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 19647-2005 Single wall corrugated Plastics pipes for agricultural drainage
    农田排水用塑料单壁波纹管
    China National Standards
    Plastic

    English PDF
    GB/T 19687-2005 Determination of the long-term change in thermal resistance of closed-cell Plastics(accelerated laboratory test methods)
    闭孔塑料长期热阻变化的测定 实验室加速测试方法
    China National Standards
    Plastic

    English PDF
    GB/T 19603-2004 Test method for drop-proof properties ofdrop-proof Plastic films
    塑料无滴薄膜无滴性能试验方法
    China National Standards
    Plastic

    English PDF
    GB 14232.1-2004 Plastics collapsible containers for human blood and blood components--Part1:Conventional containers
    人体血液及血液成分袋式塑料容器 第1部分:传统型血袋
    China National Standards
    Plastic

    English PDF
    GB/T 19467.2-2004 Plastics--Acquisition and presentation of comparable single-point data--Part 2:Long-fibre-reinforced plastics
    塑料 可比单点数据的获得和表示 第2部分:长纤维增强材料
    China National Standards
    Plastic

    English PDF
    GB/T 19467.1-2004 Plastics--Acquisition and presentation of comparable single-point data--Part 1:Moulding materials
    塑料 可比单点数据的获得和表示 第1部分:模塑材料
    China National Standards
    Plastic

    English PDF
    GB/T 19466.3-2004 Plastics--Differential scanning calorimetry(DSC)--Part 3:Determination of temperatureand enthalpy of melting and crystallization
    塑料 差示扫描量热法(DSC) 第3部分:熔融和结晶温度及热焓的测定
    China National Standards
    Plastic

    English PDF
    GB/T 19466.2-2004 Plastics--Differential scanning calorimetry(DSC)--Part 2:Determination of glass transition temperature
    塑料 差示扫描量热法(DSC) 第2部分:玻璃化转变温度的测定
    China National Standards
    Plastic

    English PDF
    GB/T 19466.1-2004 Plastics--Differential scanning calorimetry(DSC)--Part 1:General principles
    塑料 差示扫描量热法(DSC) 第1部分:通则
    China National Standards
    Plastic

    English PDF
    GB/T 1634.3-2004 Plastics--Determination of temperature of deflection under load--Part 3:High-strength thermosetting laminates
    塑料 负荷变形温度的测定 第3部分:高强度热固性层压材料
    China National Standards
    Plastic

    English PDF
    GB/T 1634.2-2004 Plastics--Determination of temperature of deflection under load--Part 2:Plastics,ebonite and long-fibre-reinforced composites
    塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤维增强复合材料
    China National Standards
    Plastic

    English PDF
    GB/T 1634.1-2004 Plastics--Determination of temperature of deflection under load--Part 1:General test method
    塑料 负荷变形温度的测定 第1部分:通用试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 8814-2004 UnPlasticized polyvinyl chloride(PVC-U)profiles for the doors and windows
    门、窗用未增塑聚氯乙烯(PVC-U)型材
    China National Standards
    Plastic

    English PDF
    GB/T 19471.2-2004 Plastics piping systems--Elastomeric-sealing-ring-type socket joints of unplasticized poly(vinyl chloride)(PVC-U)for use with PVC-U pipes--Test method for leaktightness under negative pressure
    塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 负压密封试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 19471.1-2004 Plastics piping systems--Elastomeric-sealing-ring-type socket joints for use with unplasticized poly(vinyl chloride)(PVC-U)pipes--Test method forleaktighness under internal pressure and angular deflection
    塑料管道系统 硬聚氯乙烯(PVC-U)管材弹性密封圈式承口接头 偏角密封试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 19470-2004 Geosythetics--Plastic geonet
    土工合成材料 塑料土工网
    China National Standards
    Plastic

    English PDF
    GB/T 12027-2004 Plastics--Film and sheeting--Determination of dimensional change on heating
    塑料 薄膜和薄片 加热尺寸变化率试验方法
    China National Standards
    Plastic

    English PDF
    GB 19434.8-2004 Safety code for theinspection of rigid Plastics IBCs for dangerous goods--Performance tests
    危险货物刚性塑料中型散装容器检验安全规范 性能检验
    China National Standards
    Plastic

    English PDF
    GB/T 12000-2003 Determination of the effects of exposure to damp heat,water spray and salt mist for Plastics
    塑料暴露于湿热、水喷雾和盐雾中影响的测定
    China National Standards
    Plastic

    English PDF
    GB/T 9350-2003 Plastics--Homopolymer andcopolymer resins of vinyl chloride--Determination of pH of aqueous extract
    塑料 氯乙烯均聚和共聚树脂水萃取液pH值的测定
    China National Standards
    Plastic

    English PDF
    GB/T 19280-2003 ThermoPlastics pipes for the conveyance of fluids--Determination of resistance to rapid crack propagation (RCP)--Small-scale steady-state test(S4 test)
    流体输送用热塑性塑料管材 耐快速裂纹扩展(RCP)的测定 小尺寸稳态试验(S4试验)
    China National Standards
    Plastic

    English PDF
    GB/T 19278-2003 General terms and their definitions of thermoPlastic pipes,fittings and valves
    热塑性塑料管材、管件及阀门通用术语及其定义
    China National Standards
    Plastic

    English PDF
    GB/T 19276.2-2003 Determination of the ultimate aerobic biodegradability of Plastic materials in an aqueous medium--Method by analysis of evolved carbon dioxide
    水性培养液中材料最终需氧生物分解能力的测定 采用测定释放的二氧化碳的方法
    China National Standards
    Plastic

    English PDF
    GB/T 19276.1-2003 Determination of the ultimate aerobic biodegradability of Plastic materials in an aqueous medium--Method by measuring the oxygen demand in a closed respirometer
    水性培养液中材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量的方法
    China National Standards
    Plastic

    English PDF
    GB/T 19275-2003 Evaluation of the potential biodegradability and disintegration of Plastic materials by the action of the specific microorganisms
    材料在特定微生物作用下潜在生物分解和崩解能力的评价
    China National Standards
    Plastic

    English PDF
    GB/T 19274-2003 Geosynthetics--Plastic geocell
    土工合成材料 塑料土工格室
    China National Standards
    Plastic

    English PDF
    GB/T 5009.98-2003 Method for analysis of hygienic standard of unsatur-ated polyester resin and glass fibre reinforced Plastics used as food containers and packaging materials
    食品容器及包装材料用不饱和聚酯树脂及其玻璃钢制品卫生标准的分析方法
    China National Standards
    Plastic

    English PDF
    GB/T 5566-2003 Rubber or Plastics hoses--Test method for crush resistance
    橡胶或塑料软管 耐压扁试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 19243-2003 Rubber,vulcanized or thermoPlastic--Methods of test for staining in contact with organic material
    硫化橡胶或热塑性橡胶与有机物接触污染的试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 7755-2003 Rubber,vulcanized of thermoPlastic--Determination of permeability to gases
    硫化橡胶或热塑性橡胶 透气性的测定
    China National Standards
    Plastic

    English PDF
    GB/T 12586-2003 Rubber or Plastics-coated fabrics--Determination of resistance to damage by flexing
    橡胶或塑料涂覆织物 耐屈挠破坏性的测定
    China National Standards
    Plastic

    English PDF
    GB/T 9647-2003 ThermoPlastics pipes--Determination of ringstiffness
    热塑性塑料管材环刚度的测定
    China National Standards
    Plastic

    English PDF
    GB/T 8804.3-2003 ThermoPlastic pipes--Determination of tensile properties--Part 3: Polyolefin pipes
    热塑性塑料管材 拉伸性能测定 第3部分: 聚烯烃管材
    China National Standards
    Plastic

    English PDF
    GB/T 8804.2-2003 ThermoPlastic pipes--Determination of tensile properties--Part 2: Pipes made of unplasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C)and high-impact poly(vinyl chloride)(PVC-HI)
    热塑性塑料管材 拉伸性能测定 第2部分: 硬聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)和高抗冲聚氯乙烯(PVC-HI)管材
    China National Standards
    Plastic

    English PDF
    GB/T 8804.1-2003 ThermoPlastic pipes--Determination of tensile properties--Part 1: General test method
    热塑性塑料管材 拉伸性能测定 第1部分:试验方法总则
    China National Standards
    Plastic

    English PDF
    GB/T 6111-2003 ThermoPlastics pipes for the conveyance of fluids--Resistance to internal pressure--Test method
    流体输送用热塑性塑料管材耐内压试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 18991-2003 ThermoPlastics pipes and fittings forhot and cold water systems
    冷热水系统用热塑性塑料管材和管件
    China National Standards
    Plastic

    English PDF
    GB 12953-2003 Chlorinated polyethylene Plastic sheets for waterproofing
    氯化聚乙烯防水卷材
    China National Standards
    Plastic

    English PDF
    GB/T 6594.2-2003 Plastics--Polystyrene(PS) moulding and extrusion materials--Part 2: Preparation of testspecimens and determination of properties
    塑料 聚苯乙烯(PS)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    Plastic

    English PDF
    GB/T 2546.2-2003 Plastics--Polypropylene(PP) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties
    塑料 聚丙烯(PP)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    Plastic

    English PDF
    GB/T 18964.2-2003 Plastics--Impact-resistant polystyrene(PS-I) moulding and extrusion materials--Part 2: Preparation of test specimens and determination of properties
    塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第2部分: 试样制备和性能测定
    China National Standards
    Plastic

    English PDF
    GB/T 17037.4-2003 Plastic--Injection moulding of test specimens of thermoplastic materials--Part 4: Determination of moulding shrinkage
    塑料 热塑性塑料材料注塑试样的制备 第4部分: 模塑收缩率的测定
    China National Standards
    Plastic

    English PDF
    GB/T 17037.3-2003 Plastics--Injection moulding of test specimens of thermoplastic materials--Part 3: Small plates
    塑料 热塑性塑料材料注塑试样的制备 第3部分: 小方试片
    China National Standards
    Plastic

    English PDF
    GB/T 7760-2003 Rubber,vulcanized or thermoPlastic--Determination of adhesion to a rigid substrate--90 degrees peel method
    硫化橡胶或热塑性橡胶与硬质板材粘合强度的测定 90°剥离法
    China National Standards
    Plastic

    English PDF
    GB/T 18950-2003 Rubber and Plastics hoses--Determination of ultra-violet resistance under static conditions
    橡胶和塑料软管 静态下耐紫外线性能测定
    China National Standards
    Plastic

    English PDF
    GB/T 18949-2003 Rubber and Plastics hoses--Assessment of ozone resistance under dynamic conditions
    橡胶和塑料软管 动态条件下耐臭氧性能的评定
    China National Standards
    Plastic

    English PDF
    GB/T 12588-2003 Plastics coated fabrics--Polyvinyl chloride coatings--Rapid method for checking fusion
    塑料涂覆织物 聚氯乙烯涂覆层 融合程度快速检验法
    China National Standards
    Plastic

    English PDF
    GB/T 12587-2003 Rubber or Plastics-coated fabrics--Determination of crush resistance
    橡胶或塑料涂覆织物 抗压裂性的测定
    China National Standards
    Plastic

    English PDF
    GB/T 7139-2002 Plastics--Vinyl chloride homopolymers and copolymers--Determination of chlorine content
    塑料 氯乙烯均聚物和共聚物 氯含量的测定
    China National Standards
    Plastic

    English PDF
    GB/T 3400-2002 Plastics--Homopolymer and copolymer resins of vinyl chloeride for general use--Determination of plasticizer absorption at room temperature
    塑料 通用型氯乙烯均聚和共聚树脂 室温下增塑剂吸收量的测定
    China National Standards
    Plastic

    English PDF
    GB/T 18843-2002 Dip Plastic gloves
    浸塑手套
    China National Standards
    Plastic

    English PDF
    GB/T 16273.5-2002 Graphical symbols for use on equipment--Part 5:Common symbols for Plastic machine
    设备用图形符号 第5部分:塑料机械通用符号
    China National Standards
    Plastic

    English PDF
    GB/T 18744-2002 Geosynthetics--Plastic three dimensional erosion control mat
    土工合成材料 塑料三维土工网垫
    China National Standards
    Plastic

    English PDF
    GB/T 18743-2002 ThermoPlastics pipes for the transport of fluids--Determination of impact by the charpy method
    流体输送用热塑性塑料管材简支梁冲击试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 7142-2002 Determination of time-temperature limits for Plastics after prolonged exposure to heat
    塑料长期热暴露后时间-温度极限的测定
    China National Standards
    Plastic

    English PDF
    GB 18545-2001 Occupational exposure limit for fiberglass reinforced Plastic dust in the air of workplace
    车间空气中玻璃钢粉尘职业接触限值
    China National Standards
    Plastic

    English PDF
    GB/T 8803-2001 Injection-moulded unPlasticized poly(vinyl chloride)(PVC-U),chlorinated poly(vinyl chloride)(PVC-C),acrylonitrile butadiene-styrene(ABS)and acrylonitrile-styrene-acrylester(ASA)fittings--Hot oven test method
    注射成型硬质聚氯乙烯(PVC-U)、氯化聚氯乙烯(PVC-C)、丙烯腈-丁二烯-苯乙烯三元共聚物(ABS)和丙烯腈-苯乙烯-丙烯酸盐三元共聚物(ASA)管件 热烘箱试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 8802-2001 ThermoPlastics pipes and fitting--Determination of vicat softening temperature
    热塑性塑料管材、管件 维卡软化温度的测定
    China National Standards
    Plastic

    English PDF
    GB/T 6673-2001 Plastics film and sheeting--Determination of length and width
    塑料薄膜和薄片长度和宽度的测定
    China National Standards
    Plastic

    English PDF
    GB/T 6672-2001 Plastics film and sheeting--Determination of thickness by mechanical scanning
    塑料薄膜和薄片厚度测定 机械测量法
    China National Standards
    Plastic

    English PDF
    GB/T 6671-2001 ThermoPlastics pipes--Determination of longitudinal reversion
    热塑性塑料管材 纵向回缩率的测定
    China National Standards
    Plastic

    English PDF
    GB/T 18475-2001 ThermoPlastics materials for pipes and fittings for pressure applications classification and designation--Overall service(design) coefficient
    热塑性塑料压力管材和管件用材料分级和命名 总体使用(设计)系数
    China National Standards
    Plastic

    English PDF
    GB/T 14152-2001 ThermoPlastics pipes--Determination of resistance to external blows--Round-the-clock method
    热塑性塑料管材耐外冲击性能试验方法 时针旋转法
    China National Standards
    Plastic

    English PDF
    GB/T 10798-2001 ThermoPlastics pipes--Universal wall thickness table
    热塑性塑料管材通用壁厚表
    China National Standards
    Plastic

    English PDF
    GB/T 9577-2001 Rubber and Plastics hose and hose assemblies--Rules for marking,package and transportation
    橡胶和塑料软管及软管组合件 标志、包装和运输规则
    China National Standards
    Plastic

    English PDF
    GB/T 9574-2001 Rubber and Plastics hoses and hose assemblies--Ratios of proof and burst pressure to design working pressure
    橡胶和塑料软管及软管组合件 试验压力、爆破压力与设计工作压力的比率
    China National Standards
    Plastic

    English PDF
    GB/T 7129-2001 Rubber or Plastics hoses--Determinationof volumetric expansion
    橡胶或塑料软管 容积膨胀的测定
    China National Standards
    Plastic

    English PDF
    GB/T 6036-2001 Rubber,vulcanized or thermoPlastic--Determination of low temperature stiffening(Gehman test)
    硫化橡胶或热塑性橡胶 低温刚性的测定(吉门试验)
    China National Standards
    Plastic

    English PDF
    GB/T 2439-2001 Conducting and dissipative rubbers,vulcanized or thermoPlastic--Measurement of resistivity
    硫化橡胶或热塑性橡胶 导电性能和耗散性能电阻率的测定
    China National Standards
    Plastic

    English PDF
    GB/T 18426-2001 Rubber or Plastics-coated fabrics--Low-temperature bend test
    橡胶或塑料涂覆织物 低温弯曲试验
    China National Standards
    Plastic

    English PDF
    GB/T 18424-2001 Rubber and Plastics hoses--Exposure to a xenon arc lamp--Determination of changes in colour andappearance
    橡胶和塑料软管 氙弧灯曝晒 颜色和外观变化的测定
    China National Standards
    Plastic

    English PDF
    GB/T 1669-2001 Plasticizers--Determination of mass loss on heating
    增塑剂加热减量的测定
    China National Standards
    Plastic

    English PDF
    GB/T 1663-2001 Plasticizers--Determination of crytallizing point
    增塑剂结晶点的测定
    China National Standards
    Plastic

    English PDF
    GB/T 12585-2001 Rubber,vulcanized or thermoPlastic--Rubber sheet and rubber-coated fabric--Determination rate of volatile liquids(gravimetic technique)
    硫化橡胶或热塑性橡胶 橡胶片材和橡胶涂覆织物 挥发性液体透过速率的测定(质量法)
    China National Standards
    Plastic

    English PDF
    GB/T 3682-2000 Determination of the melt mass-flow rate (MFR) and the melt volume-flow rate (MVR) of thermoPlastics
    热塑性塑料熔体质量流动速率和熔体体积流动速率的测定
    China National Standards
    Plastic

    English PDF
    GB/T 12783-2000 Editorial nominating method for the modeldesignation of rubber and Plastics machinery
    橡胶塑料机械产品型号编制方法
    China National Standards
    Plastic

    English PDF
    GB/T 1633-2000 Plastics--Thermoplastic materials--Determination of Vicat softening temperature(VST)
    热塑性塑料维卡软化温度(VST)的测定
    China National Standards
    Plastic

    English PDF
    GB 18072-2000 Health protection zone standard for Plastics plant
    塑料厂卫生防护距离标准
    China National Standards
    Plastic

    English PDF
    GB/T 18042-2000 ThermoPlastics pipes--Determination of creep ratio
    热塑性塑料管材蠕变比率的试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 1038-2000 Plastics--Film and sheeting--Determination of gas transmission--Differential-pressure method
    塑料薄膜和薄片气体透过性试验方法 压差法
    China National Standards
    Plastic

    English PDF
    GB/T 18022-2000 Acoustics--Methods for measuring the longitudinal sound speed and attenuation coefficient of rubbers and Plastics in the frequency range 1 MHz to 10 MHz
    声学 1~10 MHz频率范围内橡胶和塑料纵波声速与衰减系数的测量方法
    China National Standards
    Plastic

    English PDF
    GB/T 17690-1999 Geosynthetics--Plastic woven film yarn geotextile
    土工合成材料 塑料扁丝编织土工布
    China National Standards
    Plastic

    English PDF
    GB/T 17603-1998 Method for outdoor exposure testing of photodegradable Plastics
    光解性塑料户外暴露试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 7530-1998 Rubber or Plastics-coated fabrics--Glossary of terms
    橡胶或塑料涂覆织物 术语
    China National Standards
    Plastic

    English PDF
    GB/T 6031-1998 Rubber,vulcanized or thermoPlastic--Determination of hardness (hardness between 10IRHD and 100 IRHD)
    硫化橡胶或热塑性橡胶硬度的测定(10~100 IRHD)
    China National Standards
    Plastic

    English PDF
    GB/T 2918-1998 Plastics--Standard atmospheres for conditioning and testing
    塑料试样状态调节和试验的标准环境
    China National Standards
    Plastic

    English PDF
    GB/T 17037.1-1997 Injection moulding of test specimens of thermoPlastic materials--Part 1:General principles and moulding of multipurpose and bar test specimens
    热塑性塑料材料注塑试样的制备 第1部分:一般原理及多用途试样和长条试样的制备
    China National Standards
    Plastic

    English PDF
    GB/T 6342-1996 Cellular Plastics and rubbers--Determination of linear dimensions
    泡沫塑料与橡胶 线性尺寸的测定
    China National Standards
    Plastic

    English PDF
    GB/T 16276-1996 Test method for blocking of Plastic film
    塑料薄膜粘连性试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 5738-1995 Plastic crates for beverage bottled
    瓶装酒、饮料塑料周转箱
    China National Standards
    Plastic

    English PDF
    GB/T 5737-1995 Plastic container for food
    食品塑料周转箱
    China National Standards
    Plastic

    English PDF
    GB/T 15662-1995 Method of testing volume resistivity of conducting and antistatic Plastics
    导电、防静电塑料体积电阻率测试方法
    China National Standards
    Plastic

    English PDF
    GB 15593-1995 Plasticized polyvinyl chloride (PVC) compounds for transfusion (infusion) equipment
    输血(液)器具用软聚氯乙烯塑料
    China National Standards
    Plastic

    English PDF
    GB/T 15560-1995 Standard test method for short-time hydraulic failure and resistance to constant internal pressure of the Plastics pipes for the transport of fluids
    流体输送用塑料管材液压瞬时爆破和耐压试验方法
    China National Standards
    Plastic

    English PDF
    GB/T 1664-1995 Plasticizers--Determination of colour
    增塑剂外观色度的测定
    China National Standards
    Plastic

    English PDF
    GB/T 15234-1994 Plastics flat pallets
    塑料平托盘
    China National Standards
    Plastic

    English PDF

    Find out:1333Items   |  To Page of: First -Previous-Next -Last  | [7] [8] [9] [10] [11] [12] [13]

     

    +86-755-25831330        sales@gbstandards.org 
    106# Zhongmao Mansion,No.1 Beizhan Road,Shenzhen,China
    ©  RJS Copyright  2001-2025 All Rights Reserved

    - Since 2001 -
    Focus on China Standards & Compliance Services

    www.gbstandards.org

    China National Standards