![]() |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 25390-2010 |
Spheroidal graphite cast iron for Wind turbine 风力发电机组 球墨铸铁件 |
China National Standards W |
![]() English PDF |
GB/T 25389.2-2010 |
Wind turbine low-speed permanent magnet synchronous generator - Part 2: Testing methods 风力发电机组 低速永磁同步发电机 第2部分:试验方法 |
China National Standards W |
![]() English PDF |
GB/T 25389.1-2010 |
Wind turbine low-speed permanent magnet synchronous generator - Part 1: Technical conditions 风力发电机组 低速永磁同步发电机 第1部分:技术条件 |
China National Standards W |
![]() English PDF |
GB/T 25388.2-2010 |
Double-fed converter of Wind turbine generator system - Part 2: Test method 风力发电机组 双馈式变流器 第2部分:试验方法 |
China National Standards W |
![]() English PDF |
GB/T 25388.1-2010 |
Double-fed converter of Wind turbine generator system - Part 1: Technical condition 风力发电机组 双馈式变流器 第1部分:技术条件 |
China National Standards W |
![]() English PDF |
GB/T 25387.2-2010 |
Full-poWer converter of wind turbine generator systems - Part 2: Test method 风力发电机组 全功率变流器 第2部分:试验方法 |
China National Standards W |
![]() English PDF |
GB/T 25387.1-2010 |
Full-poWer converter of wind turbine generator systems - Part 1: Technical condition 风力发电机组 全功率变流器 第1部分:技术条件 |
China National Standards W |
![]() English PDF |
GB/T 25386.2-2010 |
Wind turbine generator system - Variable speed constant frequency control system - Part 2: Test method 风力发电机组 变速恒频控制系统 第2部分:试验方法 |
China National Standards W |
![]() English PDF |
GB/T 25386.1-2010 |
Wind turbine generator system variable speed constant frequency control system - Part 1: Technical condition 风力发电机组 变速恒频控制系统 第1部分:技术条件 |
China National Standards W |
![]() English PDF |
GB/T 25385-2010 |
Operation and maintenance requirement for Wind turbines 风力发电机组 运行及维护要求 |
China National Standards W |
![]() English PDF |
GB/T 25384-2010 |
Turbine blade of Wind turbine generator systems - Full-scale structural testing of rotor blades 风力发电机组 风轮叶片全尺寸结构试验 |
China National Standards W |
![]() English PDF |
GB/T 25383-2010 |
Wind turbine generator system - Rotor blades 风力发电机组 风轮叶片 |
China National Standards W |
![]() English PDF |
GB/T 25382-2010 |
Regulations for operational acceptance test of off-grid Wind/solar hybrid generator system 离网型风光互补发电系统 运行验收规范 |
China National Standards W |
![]() English PDF |
GB/T 25381-2010 |
Genealogy of Wind turbine generator system 风力发电机组 系列型谱 |
China National Standards W |
![]() English PDF |
GB/T 25379.2-2010 |
Modular units for machine tools - Workholding pallets - Part 2: Workholding pallets of nominal size greater than 800 mm 机床通用部件 工件随行托板 第2部分:名义尺寸大于800mm的工件随行托板 |
China National Standards W |
![]() English PDF |
GB/T 25379.1-2010 |
Modular units for machine tools - Workholding pallets - Part 1: Workholding pallets up to 800 mm nominal size 机床通用部件 工件随行托板 第1部分:名义尺寸至800mm的工件随行托板 |
China National Standards W |
![]() English PDF |
GB/T 25378-2010 |
Collets With 8°setting angle for tool shanks - Collets,nuts and fitting dimensions 工具柄用8°安装锥的弹簧夹头 弹簧夹头、螺母和配合尺寸 |
China National Standards W |
![]() English PDF |
GB/T 25369-2010 |
Metal cutting-bimetal band saW blades - Technical specifications 金属切割双金属带锯条 技术条件 |
China National Standards W |
![]() English PDF |
GB/T 25355-2010 |
Aircraft - Ground-based de-icing/anti-icing methods With fluids 航空器 地面除冰防冰液体法 |
China National Standards W |
![]() English PDF |
GB/T 25344-2010 |
Code for railWay lines of the People’s Republic of China 中华人民共和国铁路线路名称代码 |
China National Standards W |
![]() English PDF |
GB/T 25343.5-2010 |
RailWay applications - Welding of railway vehicles and components - Part 5: Inspection,testing and documentation 铁路应用 轨道车辆及其零部件的焊接 第5部分:检验、试验及文件 |
China National Standards W |
![]() English PDF |
GB/T 25343.4-2010 |
RailWay applications - Welding of railway vehicles and components - Part 4: Production requirements 铁路应用 轨道车辆及其零部件的焊接 第4部分:生产要求 |
China National Standards W |
![]() English PDF |
GB/T 25343.3-2010 |
RailWay applications - Welding of railway vehicles and components - Part 3: Design requirements 铁路应用 轨道车辆及其零部件的焊接 第3部分:设计要求 |
China National Standards W |
![]() English PDF |
GB/T 25343.2-2010 |
RailWay applications - Welding of railway vehicles and components - Part 2: Quality requirements and certification of welding manufacturer 铁路应用 轨道车辆及其零部件的焊接 第2部分:焊接制造商的质量要求及认证 |
China National Standards W |
![]() English PDF |
GB/T 25343.1-2010 |
RailWay applications - Welding of railway vehicles and components - Part 1: General 铁路应用 轨道车辆及其零部件的焊接 第1部分:总则 |
China National Standards W |
![]() English PDF |
GB/T 25342-2010 |
Vocabulary for railWay track-laying machine and girder-erecting machine 铁路铺轨机、架桥机词汇 |
China National Standards W |
![]() English PDF |
GB/T 25341.2-2010 |
Quality of railWay passenger service - Part 2:On board 铁路旅客运输服务质量 第2部分:列车 |
China National Standards W |
![]() English PDF |
GB/T 25341.1-2010 |
Quality of railWay passenger service - Part 1:Station 铁路旅客运输服务质量 第1部分:车站 |
China National Standards W |
![]() English PDF |
GB/T 25340-2010 |
Technical regulations for automatic equipment identification of railWay locomotive and vehicle 铁路机车车辆自动识别设备技术条件 |
China National Standards W |
![]() English PDF |
GB/T 25339-2010 |
RailWay track-laying machine 铁路轨排铺轨机 |
China National Standards W |
![]() English PDF |
GB/T 25338.2-2010 |
SWitch machine for railway - Part 2: Test methods 铁路道岔转辙机 第2部分:试验方法 |
China National Standards W |
![]() English PDF |
GB/T 25338.1-2010 |
SWitch machine for railway - Part 1: General specification 铁路道岔转辙机 第1部分:通用技术条件 |
China National Standards W |
![]() English PDF |
GB/T 25337-2010 |
General technical specifications for rail heavy-duty permanent Way machinery 铁路大型线路机械通用技术条件 |
China National Standards W |
![]() English PDF |
GB/T 25336-2010 |
Test and inspection method for rail heavy-duty permanent Way machinery 铁路大型线路机械检查与试验方法 |
China National Standards W |
![]() English PDF |
GB/T 25335-2010 |
RailWay T-girder erecting machine 铁路T梁架桥机 |
China National Standards W |
![]() English PDF |
GB/T 25334.2-2010 |
Technical specification for railWay locomotive car body - Part 2:Electric locomotiver car body 铁道机车车体技术条件 第2部分:电力机车车体 |
China National Standards W |
![]() English PDF |
GB/T 25334.1-2010 |
Technical specification for railWay locomotive car body - Part 1: Diesel locomotiver car body 铁道机车车体技术条件 第1部分:内燃机车车体 |
China National Standards W |
![]() English PDF |
GB/T 25281-2010 |
The vest With safety sign for the working people on roads 道路作业人员安全标志服 |
China National Standards W |
![]() English PDF |
GB/T 19072-2010 |
ToWer of wind turbine generator system 风力发电机组 塔架 |
China National Standards W |
![]() English PDF |
GB/T 18400.5-2010 |
Test conditions for machining centres - Part 5: Accuracy and repeatability of positioning of Work-holding pallets 加工中心检验条件 第5部分:工件夹持托板的定位精度和重复定位精度检验 |
China National Standards W |
![]() English PDF |
GB/T 18400.2-2010 |
Test conditions for machining centres - Part 2: Geometric tests for machines With vertical spindle or universal heads with vertical primary rotary axis (vertical Z-axis) 加工中心检验条件 第2部分:立式或带垂直主回转轴的万能主轴头机床几何精度检验(垂直Z轴) |
China National Standards W |
![]() English PDF |
GB/T 18400.1-2010 |
Test conditions for machining centres - Part 1: Geometric tests for machines With horizontal spindle and with accessory heads (horizontal Z -axis) 加工中心检验条件 第1部分:卧式和带附加主轴头机床几何精度检验(水平Z轴) |
China National Standards W |
![]() English PDF |
GB/T 17984-2010 |
TWist drills - Technical specifications 麻花钻 技术条件 |
China National Standards W |
![]() English PDF |
GB/T 17390-2010 |
Recommended practice for electrical submersible pump teardoWn report 潜油电泵拆卸报告的编写 |
China National Standards W |
![]() English PDF |
GB/T 14388-2010 |
Tungsten carbide tipped circular saW blade for woodworking 木工硬质合金圆锯片 |
China National Standards W |
![]() English PDF |
GB/T 13317-2010 |
Vocabulary for railWay passenger transport 铁路旅客运输词汇 |
China National Standards W |
![]() English PDF |
GB/T 12448-2010 |
Woodworking machines - Programming method for the types 木工机床 型号编制方法 |
China National Standards W |
![]() English PDF |
GB/T 1150-2010 |
Internal combustion engines - Cast iron Wet cylinder liners - Specifications 内燃机 湿式铸铁气缸套 技术条件 |
China National Standards W |
![]() English PDF |
GB/T 10961-2010 |
Woodworking machines - Symbols for indications 木工机床 操作指示形象化符号 |
China National Standards W |
![]() English PDF |
GB/T 14506.2-2010 |
Methods for chemical analysis of silicate rocks - Part 2: Determination of combined Water content 硅酸盐岩石化学分析方法 第2部分:化合水量测定 |
China National Standards W |
![]() English PDF |
GB/T 14506.1-2010 |
Methods for chemical analysis of silicate rocks - Part 1: Determination of hygroscopic Water content 硅酸盐岩石化学分析方法 第1部分:吸附水量测定 |
China National Standards W |
![]() English PDF |
GB/T 13072-2010 |
Geological Water samples - Determination of radioactive ratio 226Ra/228Ra - Emanation - β counting techniques 地质水样 226Ra/228Ra 放射性活度比值测定 射气法 - β 法 |
China National Standards W |
![]() English PDF |
GB/T 13071-2010 |
Geological Waters samples - Determination of radioactive ratios 234U/238U and 230Th/232Th - Extraction chromatograph and alpha spectrometry measure 地质水样 234U/238U、230Th/232Th 放射性活度比值的测定 - 萃淋树脂萃取色层分离 α 能谱法 |
China National Standards W |
![]() English PDF |
GB/Z 25458-2010 |
Rules and procedures for conformity testing and certification of Wind turbine generator system 风力发电机组 合格认证规则及程序 |
China National Standards W |
![]() English PDF |
GB/Z 25427-2010 |
Wind turbine generator systems - Lightning protection 风力发电机组 雷电防护 |
China National Standards W |
![]() English PDF |
GB/Z 25426-2010 |
Wind turbine generator systems measurement of mechanical loads 风力发电机组 机械载荷测量 |
China National Standards W |
![]() English PDF |
GB/Z 25425-2010 |
Declaration of apparent sound poWer level and tonality values for the wind turbine 风力发电机组 公称视在声功率级和音值 |
China National Standards W |
![]() English PDF |
GB 50634-2010 |
Code for design of industrial Waste composition in cement kiln 水泥窑协同处置工业废物设计规范(2015年版) |
China National Standards W |
![]() English PDF |
GB 50633-2010 |
Technical code for engineering surveying of nuclear poWer station 核电厂工程测量技术规范 |
China National Standards W |
![]() English PDF |
GB/T 50594-2010 |
Standard for Water function zoning 水功能区划分标准 |
China National Standards W |
![]() English PDF |
GB 25463-2010 |
Discharge standard of Water pollutants for printing ink industry 油墨工业水污染物排放标准 |
China National Standards W |
![]() English PDF |
GB 25462-2010 |
The discharge standard of Water pollutants for yeast industry 酵母工业水污染物排放标准 |
China National Standards W |
![]() English PDF |
GB 25461-2010 |
Discharge standards of Water pollutants for starch industry 淀粉工业水污染物排放标准 |
China National Standards W |
![]() English PDF |
GB/T 25279-2010 |
HolloW fiber flat-plat membrane module 中空纤维帘式膜组件 |
China National Standards W |
![]() English PDF |
GB/T 25275-2010 |
Polarizing film for Liquid Crystal Display (LCD) - Method of test for the properties of photics and Weather resistance 液晶显示器(LCD)用偏振片 光学性能和耐候性能测试方法 |
China National Standards W |
![]() English PDF |
GB/T 25273-2010 |
Films for liquid crystal display(LCD) - Determination of haze With integrating sphere 液晶显示器(LCD)用薄膜 雾度测定方法 积分球法 |
China National Standards W |
![]() English PDF |
GB/T 25257-2010 |
Optical functional films - Determination of Warping degree 光学功能薄膜 翘曲度测定方法 |
China National Standards W |
![]() English PDF |
GB/T 25250-2010 |
Imaging materials - Colour images on paper prints - Determination of indoor Water resistance of printed colour images 成像材料 纸质照片上的彩色影像 打印彩色影像室内耐水性测定 |
China National Standards W |
![]() English PDF |
GB/T 25188-2010 |
Thickness measurements for ultrathin silicon oxide layers on silicon Wafers X-ray photoelectron spectroscopy 硅晶片表面超薄氧化硅层厚度的测量 X射线光电子能谱法 |
China National Standards W |
![]() English PDF |
GB/T 25183-2010 |
Paste for compressive strength test of Wall brick 砌墙砖抗压强度试验用净浆材料 |
China National Standards W |
![]() English PDF |
GB/T 25180-2010 |
Technical requirements for integrated treatment and resource utilization of municipal solid Waste 生活垃圾综合处理与资源利用技术要求 |
China National Standards W |
![]() English PDF |
GB/T 25179-2010 |
Technical requirements for site utilization after stabilization in municipal solid Waste landfill 生活垃圾填埋场稳定化场地利用技术要求 |
China National Standards W |
![]() English PDF |
GB/T 25178-2010 |
Reduced-pressure type backfloW preventer 减压型倒流防止器 |
China National Standards W |
![]() English PDF |
GB/T 25175-2010 |
Technical requirements for collection and recycling of bulky Waste 大件垃圾收集和利用技术要求 |
China National Standards W |
![]() English PDF |
GB/T 21782.9-2010 |
Coating poWders - Part 9:Sampling 粉末涂料 第9部分:取样 |
China National Standards W |
![]() English PDF |
GB/T 21782.5-2010 |
Coating poWders - Part 5:Determination of flow properties of a powder/air mixture 粉末涂料 第5部分:粉末空气混合物流动性的测定 |
China National Standards W |
![]() English PDF |
GB/T 21782.14-2010 |
Coating poWders - Part 14: Terminology 粉末涂料 第14部分:术语 |
China National Standards W |
![]() English PDF |
GB/T 21782.12-2010 |
Coating poWders - Part 12:Determination of compatibility 粉末涂料 第12部分:相容性的测定 |
China National Standards W |
![]() English PDF |
GB/T 21782.11-2010 |
Coating poWders - Part 11: Inclined-plane flow test 粉末涂料 第11部分:倾斜板流动性的测定 |
China National Standards W |
![]() English PDF |
GB/T 17431.2-2010 |
LightWeight aggregates and its test methods - Part 2: Test methods for lightweight aggregates 轻集料及其试验方法 第2部分:轻集料试验方法 |
China National Standards W |
![]() English PDF |
GB 25131-2010 |
Safety requirements for Water chillers (heat pump) using the vapor compression cycle 蒸气压缩循环冷水(热泵)机组 安全要求 |
China National Standards W |
![]() English PDF |
GB/T 25166-2010 |
Wakame 裙带菜 |
China National Standards W |
![]() English PDF |
GB/T 8577-2010 |
Determination of free Water for compound fertilizers - Karl Fischer method 复混肥料中游离水含量的测定 卡尔.费休法 |
China National Standards W |
![]() English PDF |
GB/T 8576-2010 |
Determination of free Water for compound fertilizers - Vacuum oven method 复混肥料中游离水含量的测定 真空烘箱法 |
China National Standards W |
![]() English PDF |
GB/T 8570.5-2010 |
Determination of liquefied anhydrous ammonia - Part 5: Water content Karl Fishcer method 液体无水氨的测定方法 第5部分:水分 卡尔.费休法 |
China National Standards W |
![]() English PDF |
GB/T 325.3-2010 |
Packaging container - Steel drums - Part 3:Non-removable head (tight head) drums With a minimum total capacity of 212l, 216.5l and 230l 包装容器 钢桶 第3部分:最小总容量212L、216.5L和230L闭口钢桶 |
China National Standards W |
![]() English PDF |
GB/T 325.2-2010 |
Packaging container - Steel drums - Part 2:Removable head (open head) drums With a minimum total capacity of 208l, 210l and 216.5l 包装容器 钢桶 第2部分:最小总容量208L、210L和216.5L全开口钢桶 |
China National Standards W |
![]() English PDF |
GB/T 25243-2010 |
Gansu alpine fine-Wool sheep 甘肃高山细毛羊 |
China National Standards W |
![]() English PDF |
GB/T 25242-2010 |
Ao han fineWool sheep 敖汉细毛羊 |
China National Standards W |
![]() English PDF |
GB/T 25237-2010 |
Grain and oil machinery - Starch Washing cyclone 粮油机械 淀粉洗涤旋流器 |
China National Standards W |
![]() English PDF |
GB/T 25171-2010 |
Animal Waste management terminology 畜禽养殖废弃物管理术语 |
China National Standards W |
![]() English PDF |
GB/T 25167-2010 |
Xinji fine Wool sheep 新吉细毛羊 |
China National Standards W |
![]() English PDF |
GB/T 25151.4-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 4: Intergranular corrosion tendency test specimen preparation for ultra loW-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第4部分:尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验的试样制取 |
China National Standards W |
![]() English PDF |
GB/T 25151.3-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 3: Intergranular corrosion tendency test for ultra loW-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第3部分:尿素级超低碳铬镍钼奥氏体不锈钢晶间腐蚀倾向试验 |
China National Standards W |
![]() English PDF |
GB/T 25151.2-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 2: Selective corrosion examination and metallography examination for ultra loW-carbon chromated nickel molybdenum austenitic stainless steel of urea grade 尿素高压设备制造检验方法 第2部分:尿素级超低碳铬镍钼奥氏体不锈钢选择性腐蚀检查和金相检查 |
China National Standards W |
![]() English PDF |
GB/T 25151.1-2010 |
Fabrication and inspection method for high pressure urea equipment - Part 1: Ultrasonic examination on the automatic strip overlay Welds of stainless steel 尿素高压设备制造检验方法 第1部分:不锈钢带极自动堆焊层超声波检测 |
China National Standards W |
![]() English PDF |
GB/T 25231-2010 |
Grain and oil machinery - Jet-air Whitening machine 粮油机械 喷风碾米机 |
China National Standards W |
![]() English PDF |
GB/T 25229-2010 |
Grain and oils storage - Requirement of airtightness of Warehouse 粮油储藏 平房仓气密性要求 |
China National Standards W |
![]() English PDF |
GB/T 25228-2010 |
Inspection of grain and oils - Determination of fumonisins in corn and its products by high liquid chromatography and fluorometer With immunoaffinity column cleanup 粮油检验 玉米及其制品中伏马毒素含量测定 免疫亲和柱净化高效液相色谱法和荧光光度法 |
China National Standards W |
![]() English PDF |
GB 5135.16-2010 |
Automatic sprinkler system - Part 16:Flexible sprinkler hose With fittings 自动喷水灭火系统 第16部分:消防洒水软管 |
China National Standards W |
![]() English PDF |
Find out:16192Items | To Page of: First -Previous-Next -Last | [93] [94] [95] [96] [97] [98] [99] |