Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 43549-2023 |
Footwear - Test methods for insoles - Static coMPRession deformation 鞋类 鞋垫试验方法 静态压缩变形 |
China National Standards MPR |
 English PDF |
| GB/T 28545-2023 |
Guidelines for modernization and performance iMPRovement of turbines, storage pumps and water pump turbines 水轮机、蓄能泵和水泵水轮机更新改造和性能改善导则 |
China National Standards MPR |
English PDF |
| GB/T 22311-2023 |
Road vehicles - Brake linings - CoMPRessive strain test method 道路车辆 制动衬片 压缩应变试验方法 |
China National Standards MPR |
English PDF |
| GB/T 5072-2023 |
Refractory materials - Normal temperature coMPRessive strength test method 耐火材料 常温耐压强度试验方法 |
China National Standards MPR |
English PDF |
| GB/T 1964-2023 |
Porous ceramics - Test method for coMPRessive strength at room temperature 多孔陶瓷 室温压缩强度试验方法 |
China National Standards MPR |
English PDF |
| GB/T 43408-2023 |
Road Vehicles CoMPRessed Natural Gas (CNG) Refueling Connectors 道路车辆 压缩天然气（CNG）加气连接器 |
China National Standards MPR |
English PDF |
| GB/T 43239-2023 |
Specifications for setting signs of urban coMPRehensive pipe corridors 城市综合管廊标识设置规范 |
China National Standards MPR |
English PDF |
| GB/T 43235-2023 |
Urban ecosystem coMPRehensive assessment index system and calculation method 城市生态系统综合评估指标体系及计算方法 |
China National Standards MPR |
English PDF |
| GB/T 43091-2023 |
Powder coMPRessive strength test method 粉末抗压强度测试方法 |
China National Standards MPR |
English PDF |
| GB/T 24804-2023 |
Standards to iMPRove the safety of elevators in use 提高在用电梯安全性的规范 |
China National Standards MPR |
English PDF |
| GB/T 16739.2-2023 |
Business conditions for automobile maintenance industry Part 2: CoMPRehensive minor repair and special maintenance of automobiles 汽车维修业经营业务条件 第2部分：汽车综合小修及专项维修业户 |
China National Standards MPR |
English PDF |
| GB/T 12691-2021 |
Air coMPRessor oil "Modification No. 1" 空气压缩机油《第1号修改单》 |
China National Standards MPR |
English PDF |
| GB/T 42883-2023 |
Smart City Infrastructure Assessment and IMPRovement Maturity Model 智慧城市基础设施 评估和改善成熟度模型 |
China National Standards MPR |
English PDF |
| GB/T 42867-2023 |
Technical Guidelines for CoMPRehensive Utilization of Coal Mine Predrainage 煤矿预排水综合利用技术导则 |
China National Standards MPR |
English PDF |
| GB/T 3251-2023 |
CoMPRession test methods for aluminum and aluminum alloy products 铝及铝合金产品压缩试验方法 |
China National Standards MPR |
English PDF |
| GB/T 42655-2023 |
Test method for high temperature coMPRession properties of continuous fiber reinforced ceramic matrix composites 连续纤维增强陶瓷基复合材料高温压缩性能试验方法 |
China National Standards MPR |
English PDF |
| GB/T 42910-2023 |
Test method for high temperature coMPRession shear strength of inorganic adhesives 无机胶粘剂高温压缩剪切强度试验方法 |
China National Standards MPR |
English PDF |
| GB/T 42900-2023 |
High strain rate and high temperature coMPRession test method for metallic materials 金属材料 高应变速率高温压缩试验方法 |
China National Standards MPR |
English PDF |
| GB/T 42828.3-2023 |
General techniques for iMPRoving saline-alkali land Part 3: Biological improvement 盐碱地改良通用技术 第3部分：生物改良 |
China National Standards MPR |
English PDF |
| GB/T 42828.2-2023 |
General techniques for iMPRoving saline-alkali land Part 2: Improvement of rice fields, ponds, fisheries and agriculture 盐碱地改良通用技术 第2部分：稻田池塘渔农改良 |
China National Standards MPR |
English PDF |
| GB/T 42828.1-2023 |
General technology for saline-alkali land iMPRovement Part 1: Iron tailings improvement 盐碱地改良通用技术 第1部分：铁尾砂改良 |
China National Standards MPR |
English PDF |
| GB/T 42812-2023 |
General Technical Specifications for Soil IMPRovement in Continuous Cropping Barriers 连作障碍土壤改良通用技术规范 |
China National Standards MPR |
English PDF |
| GB/T 10095.2-2023 |
Cylindrical gear ISO tooth surface tolerance classification system Part 2: Definition and allowable value of radial coMPRehensive deviation 圆柱齿轮 ISO齿面公差分级制 第2部分：径向综合偏差的定义和允许值 |
China National Standards MPR |
English PDF |
| GB/T 34805-2023 |
Agricultural socialization service General requirements for coMPRehensive utilization of agricultural waste 农业社会化服务 农业废弃物综合利用通用要求 |
China National Standards MPR |
English PDF |
| GB/T 25283-2023 |
Specifications for CoMPRehensive Exploration and Evaluation of Mineral Resources 矿产资源综合勘查评价规范 |
China National Standards MPR |
English PDF |
| GB/T 42679-2023 |
Resource utilization of agricultural waste CoMPRehensive utilization of biomass resources 农业废弃物资源化利用 生物质资源综合利用 |
China National Standards MPR |
English PDF |
| GB/T 25359-2023 |
Oil and Gas Industry Integrated skid-mounted reciprocating coMPRessors 石油及天然气工业 集成撬装往复压缩机 |
China National Standards MPR |
English PDF |
| GB/T 20322-2023 |
Oil and Gas Industry Reciprocating CoMPRessors 石油及天然气工业 往复压缩机 |
China National Standards MPR |
English PDF |
| GB/T 42650-2023 |
Spatial data and information transmission system Lossless and near-lossless coMPRession of multispectral and hyperspectral images 空间数据与信息传输系统 多光谱和高光谱图像无损及近无损压缩 |
China National Standards MPR |
English PDF |
| GB/T 42651-2023 |
Spatial data and information transmission system Image data coMPRession 空间数据与信息传输系统 图像数据压缩 |
China National Standards MPR |
English PDF |
| GB/T 42636-2023 |
Spatial data and information transmission system Lossless data coMPRession 空间数据与信息传输系统 无损数据压缩 |
China National Standards MPR |
English PDF |
| GB/T 42626-2023 |
Regular inspection and evaluation of coMPRessed hydrogen fiber fully wound gas cylinders for vehicles 车用压缩氢气纤维全缠绕气瓶定期检验与评定 |
China National Standards MPR |
English PDF |
| GB/T 42612-2023 |
CoMPRessed hydrogen plastic liner carbon fiber fully wound gas cylinder for vehicles 车用压缩氢气塑料内胆碳纤维全缠绕气瓶 |
China National Standards MPR |
English PDF |
| GB/T 13277.1-2023 |
CoMPRessed air - Part 1: Pollutant purification levels 压缩空气 第1部分：污染物净化等级 |
China National Standards MPR |
English PDF |
| GB/T 42552.1-2023 |
Acoustics - Laboratory method for measuring impact sound iMPRovement of cladding with small slab modules - Part 1: Heavy dense slabs 声学 小楼板模块测量覆面层撞击声改善量的实验室方法 第1部分：重质密实楼板 |
China National Standards MPR |
English PDF |
| GB/T 42584-2023 |
Informatization project coMPRehensive performance evaluation specification 信息化项目综合绩效评估规范 |
China National Standards MPR |
English PDF |
| GB/T 5750.7-2023 |
Standard Examination Methods for Drinking Water Part 7: CoMPRehensive Index of Organic Matter 生活饮用水标准检验方法 第7部分：有机物综合指标 |
China National Standards MPR |
English PDF |
| GB/T 25861-2023 |
Vapor coMPRession cycle water source high temperature heat pump unit 蒸气压缩循环水源高温热泵机组 |
China National Standards MPR |
English PDF |
| GB/T 24421.5-2023 |
Standardization Work Guidelines for Service Industry Organizations Part 5: IMPRovement 服务业组织标准化工作指南 第5部分：改进 |
China National Standards MPR |
English PDF |
| GB/T 29780-2023 |
Hermetic motor-coMPRessors for heat pump water heaters for household and similar purposes 家用和类似用途热泵热水器用全封闭型电动机-压缩机 |
China National Standards MPR |
English PDF |
| GB/T 42346-2023 |
CoMPRehensive Utilization of Vanadium-Titanium Magnetite Terms and Definitions 钒钛磁铁矿综合利用 术语和定义 |
China National Standards MPR |
English PDF |
| GB/T 13277.8-2023 |
CoMPRessed air - Part 8: Methods of measurement of mass concentration of solid particles 压缩空气 第8部分：固体颗粒质量浓度测量方法 |
China National Standards MPR |
English PDF |
| GB/T 42382.1-2023 |
Information Technology Neural Network Representation and Model CoMPRession Part 1: Convolutional Neural Networks 信息技术 神经网络表示与模型压缩 第1部分：卷积神经网络 |
China National Standards MPR |
English PDF |
| GB/T 26749-2022 |
Carbon fiber - Determination of tensile properties of iMPRegnated yarn 碳纤维 浸胶纱拉伸性能的测定 |
China National Standards MPR |
English PDF |
| GB/T 1927.11-2022 |
Test methods for physical and mechanical properties of small unblemished specimens of wood - Part 11: Determination of coMPRessive strength along the grain 无疵小试样木材物理力学性质试验方法 第11部分：顺纹抗压强度测定 |
China National Standards MPR |
English PDF |
| GB/T 41658-2022 |
Metal powders (excluding cemented carbide) copper-based iMPRegnated powder test method 金属粉末（不包括硬质合金） 铜基浸渗粉检验方法 |
China National Standards MPR |
English PDF |
| GB/T 1927.13-2022 |
Test methods for physical and mechanical properties of wood with small unblemished specimens - Part 13: Determination of transverse grain coMPRessive modulus of elasticity 无疵小试样木材物理力学性质试验方法 第13部分：横纹抗压弹性模量测定 |
China National Standards MPR |
English PDF |
| GB/T 1481-2022 |
Determination of coMPRessibility of metal powders (excluding cemented carbide powders) in uniaxial compaction 金属粉末(不包括硬质合金粉末) 在单轴压制中压缩性的测定 |
China National Standards MPR |
English PDF |
| GB/T 24162-2022 |
Periodic inspection and evaluation of coMPRessed natural gas metal liner fiber ring wound gas cylinders for automobiles 汽车用压缩天然气金属内胆纤维环缠绕气瓶定期检验与评定 |
China National Standards MPR |
English PDF |
| GB/T 34722-2017 |
IMPRegnated film paper veneer plywood and blockboard "No. 1 Amendment" 浸渍胶膜纸饰面胶合板和细木工板《第1号修改单》 |
China National Standards MPR |
English PDF |
| GB/T 1453-2022 |
Test method for flat coMPRessive properties of sandwich structures or cores 夹层结构或芯子平压性能试验方法 |
China National Standards MPR |
English PDF |
| GB/T 24160-2022 |
Hoop-wrapped composite cylinders with steel liner for the on-board storage of coMPRessed natural gas as a fuel for automotive vehicles 车用压缩天然气钢质内胆环向缠绕气瓶 |
China National Standards MPR |
English PDF |
| GB/T 11106-2022 |
Metallic powder—Determination of green strength by coMPRession of cylinder compacts 金属粉末 用圆柱形压坯的压缩测定压坯强度的方法 |
China National Standards MPR |
English PDF |
| GB/T 17926-2022 |
CoMPRessed natural gas cylinder valve for vehicle 车用压缩天然气瓶阀 |
China National Standards MPR |
English PDF |
| GB/T 41369-2022 |
Quality evaluation of coMPRehensive performance of units operation of small hydropower stations 小型水电站机组运行综合性能质量评定 |
China National Standards MPR |
English PDF |
| GB/T 41345-2022 |
General technical requirements for coMPRession molding molds for plastic bottle caps 塑料瓶盖压塑成型模具通用技术要求 |
China National Standards MPR |
English PDF |
| GB/T 42267-2022 |
Determination of coMPRession set of flexible porous polymeric materials under wet conditions 柔性多孔聚合物材料 在潮湿条件下压缩永久变形的测定 |
China National Standards MPR |
English PDF |
| GB/T 41955-2022 |
Non-opening coMPRession test method for multidirectional laminates of polymer matrix composites 聚合物基复合材料多向层合板无开孔压缩试验方法 |
China National Standards MPR |
English PDF |
| GB/T 42249-2022 |
Technical indicators and calculation methods for coMPRehensive utilization of mineral resources 矿产资源综合利用技术指标及其计算方法 |
China National Standards MPR |
English PDF |
| GB/T 13477.23-2022 |
Test methods for building sealing materials - Part 23: Determination of durability after tension-coMPRession cycles under artificial accelerated weathering 建筑密封材料试验方法 第23部分：人工加速气候老化下拉伸-压缩循环后耐久性的测定 |
China National Standards MPR |
English PDF |
| GB/T 42231-2022 |
General requirements for coMPRehensive passenger transport hubs 综合客运枢纽通用要求 |
China National Standards MPR |
English PDF |
| GB/T 13277.9-2022 |
CoMPRessed air - Part 9: Methods of measurement of liquid water content 压缩空气 第9部分：液态水含量测量方法 |
China National Standards MPR |
English PDF |
| GB/T 41825-2022 |
Management Specifications for Cross-border E-commerce CoMPRehensive Service Business of Small, Medium and Micro Enterprises 中小微企业跨境电商综合服务业务管理规范 |
China National Standards MPR |
English PDF |
| GB/T 12085.17-2022 |
Optics and photonics—Environmental test methods—Part 17: CoMPRehensive test for pollution and solar radiation 光学和光子学 环境试验方法 第17部分：污染、太阳辐射综合试验 |
China National Standards MPR |
English PDF |
| GB/T 26237.15-2022 |
Information technology - Biometric data exchange format - Part 15: PalMPRint image data 信息技术 生物特征识别数据交换格式 第15部分：掌纹图像数据 |
China National Standards MPR |
English PDF |
| GB/T 17258-2022 |
CoMPRessed Natural Gas Cylinders for Automobiles 汽车用压缩天然气钢瓶 |
China National Standards MPR |
English PDF |
| GB/T 16825.1-2022 |
Metallic materials - Inspection and calibration of static uniaxial testing machines - Part 1: Tensile and (or) coMPRession testing machines - Inspection and calibration of force measuring systems 金属材料 静力单轴试验机的检验与校准 第1部分：拉力和（或）压力试验机 测力系统的检验与校准 |
China National Standards MPR |
English PDF |
| GB/T 21239-2022 |
Test method for coMPRessive properties of fiber reinforced plastic laminates after impact 纤维增强塑料层合板冲击后压缩性能试验方法 |
China National Standards MPR |
English PDF |
| GB/T 41826-2022 |
Guidelines for Reliability IMPRovement of Consumer Products Based on Quality Assurance Data 基于质保数据的消费品可靠性改进指南 |
China National Standards MPR |
English PDF |
| GB/T 41597-2022 |
Quality Management Culture and Mechanism Support Service IMPRovement Guide 质量管理 文化和机制支撑服务提升指南 |
China National Standards MPR |
English PDF |
| GB/T 41790-2022 |
Guidelines for Quality and Safety IMPRovement of Smart Consumer Products 智能消费品质量安全改进指南 |
China National Standards MPR |
English PDF |
| GB/T 41594-2022 |
Technical requirements for coMPRehensive emergency command system of urban rail transit network 城市轨道交通线网综合应急指挥系统技术要求 |
China National Standards MPR |
English PDF |
| GB/T 41753-2022 |
Test method for artificial weathering pull-down coMPRession cycle durability of sealants 密封胶人工气候老化下拉压循环耐久性试验方法 |
China National Standards MPR |
English PDF |
| GB/T 41850.8-2022 |
Mechanical vibration - Measurement and evaluation of machine vibration - Part 8: Reciprocating coMPRessor systems 机械振动 机器振动的测量和评价 第8部分:往复式压缩机系统 |
China National Standards MPR |
English PDF |
| GB/T 40406-2021 |
Standard test method for static modulus of elasticity and poisson's ratio of carbon materials in coMPRession 炭素材料压缩静态弹性模量和泊松比测定方法 |
China National Standards MPR |
English PDF |
| GB/T 20081.3-2021 |
Pneumatic fluid power—CoMPRessed air pressure regulators and filter-regulators—Part 3:Alternative test methods for measuring the flow-rate characteristics of pressure regulators 气动 减压阀和过滤减压阀 第3部分：测试减压阀流量特性的可选方法 |
China National Standards MPR |
English PDF |
| GB/T 20081.2-2021 |
Pneumatic fluid power—CoMPRessed air pressure regulators and filter-regulators—Part 2: Test methods to determine the main characteristics to be included in literature from suppliers 气动 减压阀和过滤减压阀 第 2 部分：评定商务文件中应包含的主要特性的试验方法 |
China National Standards MPR |
English PDF |
| GB/T 20081.1-2021 |
Pneumatic fluid power—CoMPRessed air pressure regulators and filter-regulators—Part 1:Main characteristics to be included in literature from suppliers and product-marking requirements 气动 减压阀和过滤减压阀 第1部分：商务文件中应包含的主要特性和产品标识要求 |
China National Standards MPR |
English PDF |
| GB/T 31838.5-2021 |
Solid insulating materials - Dielectric and resistive properties - Part 5: Resistive properties(DC method) - Volume resistance and volume resistivity of iMPRegnation and coating materials 固体绝缘材料 介电和电阻特性 第5部分：电阻特性(DC方法) 浸渍和涂层材料的体积电阻和体积电阻率 |
China National Standards MPR |
English PDF |
| GB/T 15765-2021 |
Hermetic motor-coMPRessors for room air conditioners 房间空气调节器用全封闭型电动机-压缩机 |
China National Standards MPR |
English PDF |
| GB/T 40169-2021 |
CoMPRession-moulded plates of ultra-high-molecular-weight polyethylene(PE-UHMW)and high density polyethylene (PE-HD) 超高分子量聚乙烯（PE-UHMW）和高密度聚乙烯（PE-HD）模塑板材 |
China National Standards MPR |
English PDF |
| GB/T 39780-2021 |
Specifications for evaluating enterprises in waste resource coMPRehensive utilization 资源综合利用企业评价规范 |
China National Standards MPR |
English PDF |
| GB/T 19237-2021 |
CoMPRessed natural gas dispenser for vehicles 汽车用压缩天然气加气机 |
China National Standards MPR |
English PDF |
| GB/T 1454-2021 |
Test method for edgewise coMPRessive properties of sandwich constructions 夹层结构侧压性能试验方法 |
China National Standards MPR |
English PDF |
| GB/T 41019-2021 |
Technical guideline for coMPRehensive utilization of mine water 矿井水综合利用技术导则 |
China National Standards MPR |
English PDF |
| GB/T 10892-2021 |
Stationary air coMPRessors -- Safety rules and code of practice 固定的空气压缩机 安全规则和操作规程 |
China National Standards MPR |
English PDF |
| GB/T 26281-2021 |
Methods for the calculation of heat balance，heat efficiency and coMPRehensive energy consumption of cement rotary kiln 水泥回转窑热平衡、热效率、综合能耗计算方法 |
China National Standards MPR |
English PDF |
| GB/T 1927.12-2021 |
Test methods for physical and mechanical properties of small clear wood specimens—Part 12:Determination of strength in coMPRession perpendicular to grain 无疵小试样木材物理力学性质试验方法 第12部分：横纹抗压强度测定 |
China National Standards MPR |
English PDF |
| GB/T 13277.7-2021 |
CoMPRessed air -- Part 7：Test method for viable microbiological contaminant content 压缩空气? 第7部分：活性微生物含量测量方法 |
China National Standards MPR |
English PDF |
| GB/T 13277.6-2021 |
CoMPRessed air -- Part 6：Test methods for gaseous contaminant content 压缩空气 第6部分：气态污染物含量测量方法 |
China National Standards MPR |
English PDF |
| GB/T 12691-2021 |
Air coMPRessor oils 空气压缩机油 |
China National Standards MPR |
English PDF |
| GB/T 41099-2021 |
Specifications for monitoring system for reciprocating coMPRessors 往复活塞压缩机监测系统规范 |
China National Standards MPR |
English PDF |
| GB/T 7777-2021 |
Measurement and evaluation of mechanical vibration of displacement coMPRessors 容积式压缩机机械振动测量与评价 |
China National Standards MPR |
English PDF |
| GB/T 39519-2020 |
Hydranlic cylindrically helical coMPRession spring with high working stress—Technical specifications 高应力液压件圆柱螺旋压缩弹簧 技术条件 |
China National Standards MPR |
English PDF |
| GB/T 39121-2020 |
Specification for operation management of biochar production from crop staw on soil quality iMPRovement project 农作物秸秆炭化还田土壤改良项目运营管理规范 |
China National Standards MPR |
English PDF |
| GB/T 39216-2020 |
Method and technical specification for iMPRovement of administrative licensing process 行政许可流程优化的方法与技术规范 |
China National Standards MPR |
English PDF |
| GB/T 39091-2020 |
Guidelines for industrial waste heat coMPRehensive cascade utilization 工业余热梯级综合利用导则 |
China National Standards MPR |
English PDF |
| GB/T 2589-2020 |
General rules for calculation of the coMPRehensive energy consumption 综合能耗计算通则 |
China National Standards MPR |
English PDF |
| GB/T 38989-2020 |
Uniaxial coMPRessive elastic modulus test method of materials stabilazed with inorganic binder（middle segment method） 无机结合料稳定类材料单轴压缩弹性模量试验方法（中间段法） |
China National Standards MPR |
English PDF |
| GB/T 8813-2020 |
Rigid cellular plastics—Determination of coMPRession properties 硬质泡沫塑料 压缩性能的测定 |
China National Standards MPR |
English PDF |
| Find out:514Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 |
+86-755-25831330
