Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 34275-2024 |
Pressure piping specifications-Long-distance pipelines 压力管道规范-长输管道 |
China National Standards Pressure |
 English PDF |
| GB/T 44808.3-2024 |
Ergonomics-barrier-free design-Part 3: Sound Pressure level of voice broadcasts of products and public broadcasting systems 人类工效学-无障碍设计-第3部分：产品和公共广播系统语音播报的声压级 |
China National Standards Pressure |
English PDF |
| GB/T 45165-2024 |
Small high-Pressure cleaning machine - 小型高压清洗机- |
China National Standards Pressure |
English PDF |
| GB/T 4130.2-2024 |
Acoustics - hydrophone calibration - Part 2: calibration method for low-frequency sound Pressure field 声学-水听器校准-第2部分：低频声压场校准方法 |
China National Standards Pressure |
English PDF |
| GB/T 45146-2024 |
Road vehicles - Test methods for air Pressure and air-to-hydraulic brake systems 道路车辆-气压及气顶液制动系统试验方法 |
China National Standards Pressure |
English PDF |
| GB 23394-2024 |
Respiratory protection-Positive Pressure self-contained closed-circuit compressed oxygen respirator 呼吸防护-正压式自给闭路压缩氧气呼吸器 |
China National Standards Pressure |
English PDF |
| GB 15605-2024 |
Dust explosion Pressure relief specifications 粉尘爆炸泄压规范 |
China National Standards Pressure |
English PDF |
| GB/T 44911-2024 |
Aircraft - Environmental and operating conditions for airborne equipment - Humidity, temperature and atmospheric Pressure tests 航空器-机载设备环境和操作条件-湿度、温度和大气压力试验 |
China National Standards Pressure |
English PDF |
| GB/T 2624.5-2024 |
Measurement of full pipe fluid flow using a differential Pressure device installed in a circular cross-section pipe-Part 5: Conical device 用安装在圆形截面管道中的差压装置测量满管流体流量-第5部分：锥形装置 |
China National Standards Pressure |
English PDF |
| GB/T 2982-2024 |
Specifications, dimensions, Pressure and load of pneumatic tires for industrial vehicles 工业车辆充气轮胎规格、尺寸、气压与负荷 |
China National Standards Pressure |
English PDF |
| GB/T 14536.7-2024 |
Electric automatic controllers-Part 7: Special requirements for Pressure-sensitive electric automatic controllers, including mechanical requirements 电自动控制器-第7部分：压力敏感电自动控制器的特殊要求，包括机械要求 |
China National Standards Pressure |
English PDF |
| GB/T 44820-2024 |
General requirements for superPressure balloons 超压气球通用要求 |
China National Standards Pressure |
English PDF |
| GB/T 44845-2024 |
Low-frequency electromagnetic detection methods for Pressure-bearing equipment 承压设备低频电磁检测方法 |
China National Standards Pressure |
English PDF |
| GB/T 30661.9-2024 |
Wheelchair seats-Part 9: Guidelines for seat interface Pressure distribution 轮椅车座椅-第9部分：座椅界面压力分布指南 |
China National Standards Pressure |
English PDF |
| GB/T 44755-2024 |
Low-Pressure high-intensity ultraviolet lamp 低压高强紫外线灯 |
China National Standards Pressure |
English PDF |
| GB/T 17001.5-2024 |
Anti-counterfeiting ink - Part 5: Pressure-sensitive anti-counterfeiting ink 防伪油墨-第5部分：压敏防伪油墨 |
China National Standards Pressure |
English PDF |
| GB/T 35428-2024 |
Environmental control requirements for negative Pressure isolation wards in hospitals 医院负压隔离病房环境控制要求 |
China National Standards Pressure |
English PDF |
| GB/Z 44630-2024 |
Hydraulic machinery - Conversion of Pressure pulsation of Francis turbines 水力机械-混流式水轮机压力脉动换算 |
China National Standards Pressure |
English PDF |
| GB/T 44531-2024 |
Microelectromechanical systems (MEMS) technology - Technical specifications for automotive-grade Pressure sensors based on MEMS technology 微机电系统（MEMS）技术-基于MEMS技术的车规级压力传感器技术规范 |
China National Standards Pressure |
English PDF |
| GB/T 44518-2024 |
Underwater high-Pressure dry welding process assessment test 水下高压干式焊接工艺评定试验 |
China National Standards Pressure |
English PDF |
| GB/T 44527-2024 |
Underwater high-Pressure dry welding - Skill assessment for diving welders and welding operators 水下高压干式焊接潜水焊工和焊接操作工技能评定 |
China National Standards Pressure |
English PDF |
| GB/T 41980.3-2024 |
Hydraulic transmission - Method for determination of Pressure fluctuations in systems and components - Part 3: Hydraulic motors 液压传动-系统和元件中压力波动的测定方法-第3部分：液压马达 |
China National Standards Pressure |
English PDF |
| GB/T 2978-2024 |
Specifications, dimensions, Pressures and loads of passenger car tires 轿车轮胎规格、尺寸、气压与负荷 |
China National Standards Pressure |
English PDF |
| GB/T 2977-2024 |
Specifications, dimensions, Pressures and loads of truck tires 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards Pressure |
English PDF |
| GB/T 10476-2024 |
Technical conditions for urea high-Pressure condensers 尿素高压冷凝器技术条件 |
China National Standards Pressure |
English PDF |
| GB/T 22838.5-2024 |
Determination of physical properties of cigarettes and filter rods - Part 5: Cigarette draw resistance and filter rod Pressure drop 卷烟和滤棒物理性能的测定-第5部分：卷烟吸阻和滤棒压降 |
China National Standards Pressure |
English PDF |
| GB/T 2624.6-2024 |
Measurement of fullness using a differential Pressure device installed in a circular cross-section pipe Fluid flow in pipes - Part 6: Wedge devices 用安装在圆形截面管道中的差压装置测量满管流体流量-第6部分：楔形装置 |
China National Standards Pressure |
English PDF |
| GB/T 14271-2024 |
Test methods for the cleaning rate of fluff - oil Pressure method 毛绒洗净率试验方法-油压法 |
China National Standards Pressure |
English PDF |
| GB/T 44457-2024 |
Hydrogen storage Pressure vessels for hydrogen refueling stations 加氢站用储氢压力容器 |
China National Standards Pressure |
English PDF |
| GB/T 44279-2024 |
Temperature-humidity-vibration-low Pressure comprehensive environmental test system 温度-湿度-振动-低气压综合环境试验系统 |
China National Standards Pressure |
English PDF |
| GB/T 4732.1-2024 |
Analysis and design of Pressure vessels - Part 1: General requirements 压力容器分析设计-第1部分：通用要求 |
China National Standards Pressure |
English PDF |
| GB/T 4732.6-2024 |
Analysis and design of Pressure vessels - Part 6: Manufacturing, inspection and acceptance 压力容器分析设计-第6部分：制造、检验和验收 |
China National Standards Pressure |
English PDF |
| GB/T 4732.5-2024 |
Analysis and design of Pressure vessels - Part 5: Elastic-plastic analysis method 压力容器分析设计-第5部分：弹塑性分析方法 |
China National Standards Pressure |
English PDF |
| GB/T 4732.4-2024 |
Analysis and design of Pressure vessels - Part 4: Stress classification method 压力容器分析设计-第4部分：应力分类方法 |
China National Standards Pressure |
English PDF |
| GB/T 4732.3-2024 |
Analysis and design of Pressure vessels - Part 3: Formula method 压力容器分析设计-第3部分：公式法 |
China National Standards Pressure |
English PDF |
| GB/T 4732.2-2024 |
Analysis and design of Pressure vessels - Part 2: Materials 压力容器分析设计-第2部分：材料 |
China National Standards Pressure |
English PDF |
| GB/T 150.4-2024 |
Pressure vessels - Part 4: Manufacturing, inspection and acceptance 压力容器-第4部分：制造、检验和验收 |
China National Standards Pressure |
English PDF |
| GB/T 150.3-2024 |
Pressure vessels - Part 3: Design 压力容器-第3部分：设计 |
China National Standards Pressure |
English PDF |
| GB/T 150.2-2024 |
Pressure vessels - Part 2: Materials 压力容器-第2部分：材料 |
China National Standards Pressure |
English PDF |
| GB/T 150.1-2024 |
Pressure vessels - Part 1: General requirements 压力容器-第1部分：通用要求 |
China National Standards Pressure |
English PDF |
| GB/T 4706.89-2024 |
Safety of household and similar electrical appliances - Part 89: Special requirements for high-Pressure cleaners and steam cleaners 家用和类似用途电器的安全-第89部分：高压清洁器和蒸汽清洁器的特殊要求 |
China National Standards Pressure |
English PDF |
| GB/T 44148.3-2024 |
Steel forgings, rolled or forged steel bars for Pressure equipment-Part 3: Low temperature toughness nickel steel 承压设备用钢锻件、轧制或锻制钢棒-第3部分:低温韧性镍钢 |
China National Standards Pressure |
English PDF |
| GB/T 44148.2-2024 |
Steel forgings, rolled or forged steel bars for Pressure equipment-Part 2: Low alloy and alloy (molybdenum, chromium and chromium-molybdenum) steels with specified high temperature properties 承压设备用钢锻件、轧制或锻制钢棒-第2部分：规定高温性能的低合金及合金（钼、铬和铬钼）钢 |
China National Standards Pressure |
English PDF |
| GB/T 44148.1-2024 |
Steel forgings, rolled or forged steel bars for Pressure equipment-Part 1: General requirements 承压设备用钢锻件、轧制或锻制钢棒-第1部分：一般要求 |
China National Standards Pressure |
English PDF |
| GB/T 41666.7-2024 |
Plastic pipe systems for trenchless repair of underground non-Pressure drainage networks - Part 7: Spiral winding lining method 地下无压排水管网非开挖修复用塑料管道系统-第7部分：螺旋缠绕内衬法 |
China National Standards Pressure |
English PDF |
| GB/T 44128-2024 |
Road vehicles - Braking start Pressure of pneumatic brake systems of heavy commercial trains - Roller brake test bench measurement method 道路车辆-重型商用列车气压制动系统制动开始压力-滚筒制动试验台测量方法 |
China National Standards Pressure |
English PDF |
| GB/T 19624-2019 |
Safety assessment of in-use Pressure vessels with defects 在用含缺陷压力容器安全评定 |
China National Standards Pressure |
English PDF |
| GB/T 32270-2024 |
Pressure pipeline specifications-power pipelines 压力管道规范-动力管道 |
China National Standards Pressure |
English PDF |
| GB/T 33488.5-2024 |
Inspection methods for plastic welded Pressure-bearing equipment for chemical industry-Part 5: Ultrasonic testing by time-of-flight diffraction 化工用塑料焊接制承压设备检验方法-第5部分：衍射时差法超声检测 |
China National Standards Pressure |
English PDF |
| GB/T 43849-2024 |
Basic Environmental Test Methods for Underwater Robot Complete Machines and Components-Hydrostatic Pressure Test Method 水下机器人整机及零部件基本环境试验方法-水静压力试验方法 |
China National Standards Pressure |
English PDF |
| GB/T 19936.2-2024 |
Gears - FZG test procedure - Part 2: Relative bonding load capacity of high extreme Pressure oils FZG step loading test A10/16.6R/120 齿轮-FZG试验程序-第2部分：高极压油的相对胶合承载能力FZG阶梯加载试验A10/16.6R/120 |
China National Standards Pressure |
English PDF |
| GB/T 7911-2024 |
Thermosetting resin impregnated paper high Pressure decorative laminate (HPL) 热固性树脂浸渍纸高压装饰层积板（HPL） |
China National Standards Pressure |
English PDF |
| GB/T 43852-2024 |
Steel reinforced plastic composite Pressure pipe for hot and cold water 冷热水用钢增强塑料复合压力管 |
China National Standards Pressure |
English PDF |
| GB/T 43664.1-2024 |
Plastic pipe systems for trenchless repair of underground non-Pressure drainage networks-Part-4: In-situ curing lining method 水处理剂分散性能测定方法-第1部分：分散高岭土法 |
China National Standards Pressure |
English PDF |
| GB/T 43619-2023 |
OverPressure protection safety device Controlled safety pressure relief system 超压保护安全装置 受控安全泄压系统 |
China National Standards Pressure |
English PDF |
| GB/T 43537-2023 |
Sound system equipment Headphones and personal music players Maximum sound Pressure level measurement method 声系统设备 耳机及个人音乐播放器 最大声压级测量方法 |
China National Standards Pressure |
English PDF |
| GB/T 43324-2023 |
Foil Bearings Gas Dynamic Pressure Thrust Bearing Performance Static Load Capacity, Friction Torque, Friction Factor and Life Test 箔片轴承 气体动压止推轴承性能 静态承载能力、摩擦力矩、摩擦因数和寿命测试 |
China National Standards Pressure |
English PDF |
| GB/T 18688-2023 |
Agricultural irrigation equipment - Pressure loss in irrigation valves - Test methods 农业灌溉设备 灌溉阀的压力损失 试验方法 |
China National Standards Pressure |
English PDF |
| GB/T 19699-2023 |
Ships and Offshore Technology Cargo Tank Pressure-Vacuum Valves and Flame Arrestors 船舶和海上技术 液货舱压力-真空阀和阻火装置 |
China National Standards Pressure |
English PDF |
| GB/T 43316.4-2023 |
Plastics - Determination of environmental stress cracking (ESC) resistance - Part 4: Ball or pin Pressure method 塑料 耐环境应力开裂(ESC)的测定 第4部分:球压或针压法 |
China National Standards Pressure |
English PDF |
| GB 8599-2023 |
Technical requirements for large Pressure steam sterilizers 大型压力蒸汽灭菌器技术要求 |
China National Standards Pressure |
English PDF |
| GB/T 6881-2023 |
Acoustics - Determination of sound power level and sound energy level of noise sources by sound Pressure method - Reverberation chamber precision method 声学 声压法测定噪声源声功率级和声能量级 混响室精密法 |
China National Standards Pressure |
English PDF |
| GB/T 5310-2023 |
Seamless steel pipe for high Pressure boiler 高压锅炉用无缝钢管 |
China National Standards Pressure |
English PDF |
| GB/T 43142-2023 |
Ultra-high Pressure water jet ship rust removal complete equipment 超高压水射流船舶除锈成套装备 |
China National Standards Pressure |
English PDF |
| GB/T 43139-2023 |
Density testing of cast aluminum alloy liquid reduced Pressure solidification samples 铸造铝合金液减压凝固试样密度检测 |
China National Standards Pressure |
English PDF |
| GB/T 43123-2023 |
Ship and Offshore Technology LNG Fuel Gas Supply System (FGSS) High Pressure Pump Performance Test Requirements 船舶与海上技术 LNG燃气供应系统（FGSS）高压泵性能测试要求 |
China National Standards Pressure |
English PDF |
| GB/T 43107-2023 |
Stainless steel seamless steel pipe for instrument Pressure induction in nuclear power plants 核电站仪表引压用不锈钢无缝钢管 |
China National Standards Pressure |
English PDF |
| GB/T 43073-2023 |
Pneumatics - Test method for measuring sound Pressure levels of exhaust mufflers 气动 测量排气消声器声压级的试验方法 |
China National Standards Pressure |
English PDF |
| GB/T 43062-2023 |
Nuclear energy - Determination of neutron fluence and number of atomic dislocations (dpa) in reactor Pressure vessels and internal components 核能 反应堆压力容器和堆内构件中子注量和原子离位次数（dpa）的确定 |
China National Standards Pressure |
English PDF |
| GB/T 43019.5-2023 |
Determination of water vapor transmission rate of plastic films and sheets Part 5: Pressure sensor method 塑料薄膜和薄片水蒸气透过率的测定 第5部分：压力传感器法 |
China National Standards Pressure |
English PDF |
| GB/T 29171-2023 |
Determination of rock capillary Pressure curve 岩石毛管压力曲线的测定 |
China National Standards Pressure |
English PDF |
| GB/T 25368-2023 |
Diesel engine electronically controlled common rail system high-Pressure fuel supply pump assembly 柴油机电控共轨系统 高压供油泵总成 |
China National Standards Pressure |
English PDF |
| GB/T 20221-2023 |
Pressureless buried sewage and drainage rigid polyvinyl chloride (PVC-U) pipes 无压埋地排污、排水用硬聚氯乙烯（PVC-U）管材 |
China National Standards Pressure |
English PDF |
| GB/T 19258.2-2023 |
Sources of ultraviolet radiation for germicidal purposes Part 2: Cold cathode low Pressure mercury vapor discharge lamps 杀菌用紫外辐射源 第2部分：冷阴极低气压汞蒸气放电灯 |
China National Standards Pressure |
English PDF |
| GB/T 13664-2023 |
Rigid polyvinyl chloride (PVC-U) pipes for low-Pressure irrigation 低压灌溉用硬聚氯乙烯（PVC-U）管材 |
China National Standards Pressure |
English PDF |
| GB/T 42911-2023 |
Carbon fiber reinforced composite materials accelerated moisture absorption and supersaturation adjustment method for sealed Pressure vessels 碳纤维增强复合材料 密封压力容器加速吸湿和过饱和调节方法 |
China National Standards Pressure |
English PDF |
| GB/T 42857-2023 |
Safety requirements for Pressure swing adsorption hydrogen purification system 变压吸附提纯氢气系统安全要求 |
China National Standards Pressure |
English PDF |
| GB/T 25198-2023 |
Pressure vessel head 压力容器封头 |
China National Standards Pressure |
English PDF |
| GB/T 29918-2023 |
Test method for Pressure-composition isotherm (PCI) of rare earth hydrogen storage alloys 稀土系储氢合金 压力-组成等温线（PCI）的测试方法 |
China National Standards Pressure |
English PDF |
| GB/T 713.7-2023 |
Steel plates and strips for Pressure equipment Part 7: Stainless steel and heat-resistant steel 承压设备用钢板和钢带 第7部分：不锈钢和耐热钢 |
China National Standards Pressure |
English PDF |
| GB/T 713.6-2023 |
Steel plates and strips for Pressure-bearing equipment Part 6: Quenched and tempered high-strength steels 承压设备用钢板和钢带 第6部分：调质高强度钢 |
China National Standards Pressure |
English PDF |
| GB/T 713.5-2023 |
Steel plates and strips for Pressure equipment Part 5: High manganese steels with specified low temperature properties 承压设备用钢板和钢带 第5部分：规定低温性能的高锰钢 |
China National Standards Pressure |
English PDF |
| GB/T 713.4-2023 |
Steel plates and strips for Pressure equipment Part 4: Nickel alloy steels with specified low temperature properties 承压设备用钢板和钢带 第4部分：规定低温性能的镍合金钢 |
China National Standards Pressure |
English PDF |
| GB/T 713.3-2023 |
Steel plates and strips for Pressure equipment Part 3: Low alloy steels with specified low temperature properties 承压设备用钢板和钢带 第3部分：规定低温性能的低合金钢 |
China National Standards Pressure |
English PDF |
| GB/T 713.2-2023 |
Steel plates and strips for Pressure equipment Part 2: Non-alloy and alloy steels with specified temperature properties 承压设备用钢板和钢带 第2部分：规定温度性能的非合金钢和合金钢 |
China National Standards Pressure |
English PDF |
| GB/T 713.1-2023 |
Steel plates and strips for Pressure equipment Part 1: General requirements 承压设备用钢板和钢带 第1部分：一般要求 |
China National Standards Pressure |
English PDF |
| GB/T 20818.13-2023 |
Industrial process measurement and control. Data structures and elements in process equipment catalogs. Part 13: List of properties (LOP) for electronic data exchange of Pressure measuring equipment. 工业过程测量和控制 过程设备目录中的数据结构和元素 第13部分：压力测量设备电子数据交换用属性列表（LOP） |
China National Standards Pressure |
English PDF |
| GB/T 28782.2-2023 |
Hydraulic transmissions - Measurement technology Part 2: Measurement of mean steady-state Pressure in closed circuits 液压传动 测量技术 第2部分：密闭回路中平均稳态压力的测量 |
China National Standards Pressure |
English PDF |
| GB/T 42542-2023 |
Fiber-reinforced composite materials, sealed Pressure vessel, accelerated moisture absorption and supersaturated state adjustment method 纤维增强复合材料 密封压力容器加速吸湿及过饱和状态调节方法 |
China National Standards Pressure |
English PDF |
| GB/T 7233.2-2023 |
Steel castings - Ultrasonic testing - Part 2: High Pressure steel castings 铸钢件 超声检测 第2部分：高承压铸钢件 |
China National Standards Pressure |
English PDF |
| GB/T 42434-2023 |
General specification for aircraft constant Pressure variable hydraulic pump 飞机恒压变量液压泵通用规范 |
China National Standards Pressure |
English PDF |
| GB/T 42605-2023 |
Guidelines for Repair of Portable Pressure Vessels 移动式压力容器修理导则 |
China National Standards Pressure |
English PDF |
| GB/T 42606-2023 |
Guidelines for Repair of Stationary Pressure Vessels 固定式压力容器修理导则 |
China National Standards Pressure |
English PDF |
| GB/T 42610-2023 |
Test method for compatibility between plastic liner and hydrogen gas of high-Pressure hydrogen cylinder 高压氢气瓶塑料内胆和氢气相容性试验方法 |
China National Standards Pressure |
English PDF |
| GB/T 42536-2023 |
Combination valve for high-Pressure hydrogen storage cylinders for vehicles 车用高压储氢气瓶组合阀门 |
China National Standards Pressure |
English PDF |
| GB/Z 42625-2023 |
Vacuum technology Vacuum gauges Quadrupole mass spectrometer characteristics for partial Pressure measurement 真空技术 真空计 用于分压力测量的四极质谱仪特性 |
China National Standards Pressure |
English PDF |
| GB/T 42594-2023 |
Guidelines for Hazard Classification of Media for Pressure Equipment 承压设备介质危害分类导则 |
China National Standards Pressure |
English PDF |
| GB/T 42595-2023 |
Basic requirements for Pressure equipment repair 承压设备修理基本要求 |
China National Standards Pressure |
English PDF |
| GB/T 42567.2-2023 |
Reference conditions and procedures for testing transmitters for industrial process measurement Part 2: Specific procedures for Pressure transmitters 工业过程测量变送器试验的参比条件和程序 第2部分：压力变送器的特定程序 |
China National Standards Pressure |
English PDF |
| GB/T 42191-2023 |
MEMS piezoresistive Pressure sensitive device performance test method MEMS压阻式压力敏感器件性能试验方法 |
China National Standards Pressure |
English PDF |
| Find out:759Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 |
+86-755-25831330
