Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 11263-2024 |
Hot-rolled H-shaped steel and split T-shaped steel 热轧H型钢和剖分T型钢 |
China National Standards rolled |
 English PDF |
| GB/T 29468-2024 |
Clean rooms and related controlled environments - Sandwich panels for enclosure structures 洁净室及相关受控环境-围护结构夹芯板 |
China National Standards rolled |
English PDF |
| GB/T 5132.3-2024 |
Industrial rigid circular laminated tubes and rods of thermosetting resins for electrical use - Part 3: Circular laminated rolled tubes 电气用热固性树脂工业硬质圆形层压管和棒-第3部分：圆形层压卷制管 |
China National Standards rolled |
English PDF |
| GB/T 25915.17-2024 |
Clean rooms and related controlled environments - Part 17: Application of particle deposition rate 洁净室及相关受控环境-第17部分：粒子沉积速率应用 |
China National Standards rolled |
English PDF |
| GB/T 29469-2024 |
Clean rooms and related controlled environments - Performance and rationality evaluation 洁净室及相关受控环境-性能及合理性评价 |
China National Standards rolled |
English PDF |
| GB/T 44148.3-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 3: Low temperature toughness nickel steel 承压设备用钢锻件、轧制或锻制钢棒-第3部分:低温韧性镍钢 |
China National Standards rolled |
English PDF |
| GB/T 44148.2-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 2: Low alloy and alloy (molybdenum, chromium and chromium-molybdenum) steels with specified high temperature properties 承压设备用钢锻件、轧制或锻制钢棒-第2部分：规定高温性能的低合金及合金（钼、铬和铬钼）钢 |
China National Standards rolled |
English PDF |
| GB/T 44148.1-2024 |
Steel forgings, rolled or forged steel bars for pressure equipment-Part 1: General requirements 承压设备用钢锻件、轧制或锻制钢棒-第1部分：一般要求 |
China National Standards rolled |
English PDF |
| GB-13788-2024 |
Cold-rolled ribbed steel bars 冷轧带肋钢筋 |
China National Standards rolled |
English PDF |
| GB-1499.2-2024 |
Steel for reinforced concrete-Part 2: Hot-rolled ribbed steel bars 钢筋混凝土用钢-第2部分：热轧带肋钢筋 |
China National Standards rolled |
English PDF |
| GB-1499.1-2024 |
Steel for reinforced concrete-Part 1: Hot-rolled plain round steel bars 钢筋混凝土用钢-第1部分：热轧光圆钢筋 |
China National Standards rolled |
English PDF |
| GB/T 44051-2024 |
Non-destructive testing of welds-Phase-controlled array ultrasonic testing of thin-walled steel components-Acceptance levels 焊缝无损检测-薄壁钢构件相控阵超声检测-验收等级 |
China National Standards rolled |
English PDF |
| GB/T 12668.7202-2024 |
Speed-controlled electric drive systems - Part 7-202: General interface and use specifications for electric drive systems - Type 2 specification description 调速电气传动系统-第7-202部分：电气传动系统的通用接口和使用规范-2型规范说明 |
China National Standards rolled |
English PDF |
| GB/T 32285-2024 |
Hot-rolled H-beam piles 热轧H型钢桩 |
China National Standards rolled |
English PDF |
| GB/T 43893-2024 |
Hot-rolled steel for prefabricated steel structure buildings 装配式钢结构建筑用热轧型钢 |
China National Standards rolled |
English PDF |
| GB/T 43947-2024 |
General technical requirements for low-speed wire-controlled chassis 低速线控底盘通用技术要求 |
China National Standards rolled |
English PDF |
| GB/T 36306-2024 |
Clean rooms and related controlled environments - Technical requirements for control of chemical pollution in air 洁净室及相关受控环境-空气化学污染控制技术要求 |
China National Standards rolled |
English PDF |
| GB/T 43657.2-2024 |
Energy efficiency of industrial vehicles - Test methods - Part 2: Self-propelled vehicles, tractors and carriers controlled by operators 工业车辆能效-试验方法-第2部分：操作者控制的自行式车辆、牵引车和载运车 |
China National Standards rolled |
English PDF |
| GB/T 25915.16-2024 |
Clean rooms and related controlled environments-Part 16: Improving the energy efficiency of clean rooms and air purification devices 洁净室及相关受控环境-第16部分：提升洁净室和空气净化装置的能效 |
China National Standards rolled |
English PDF |
| GB/T 43685-2024 |
General technical requirements for inflatable membrane structure cabins and controlled environments 充气膜结构舱室及受控环境通用技术要求 |
China National Standards rolled |
English PDF |
| GB/T 25915.3-2024 |
Clean rooms and related controlled environments-Part 3: Detection methods 洁净室及相关受控环境-第3部分：检测方法 |
China National Standards rolled |
English PDF |
| GB/T 43727-2024 |
Thyristor valves for thyristor controlled series capacitors (TCSC)-Electrical test 晶闸管控制串联电容器（TCSC）用晶闸管阀-电气试验 |
China National Standards rolled |
English PDF |
| GB/T 43665-2024 |
Hot-rolled rare earth steel bars for reinforced concrete 钢筋混凝土用热轧稀土钢筋 |
China National Standards rolled |
English PDF |
| GB/T 43619-2023 |
Overpressure protection safety device Controlled safety pressure relief system 超压保护安全装置 受控安全泄压系统 |
China National Standards rolled |
English PDF |
| GB/T 43459-2023 |
Technical specifications for cell culture operations in clean rooms and controlled environments 洁净室及受控环境中细胞培养操作技术规范 |
China National Standards rolled |
English PDF |
| GB/T 3195-2023 |
Aluminum and aluminum alloy drawn (rolled) round wire rods 铝及铝合金拉（轧）制圆线材 |
China National Standards rolled |
English PDF |
| GB/T 3279-2023 |
Spring steel hot rolled steel plates and strips 弹簧钢热轧钢板和钢带 |
China National Standards rolled |
English PDF |
| GB/T 3278-2023 |
Hot rolled steel plates and strips for tools 工具用热轧钢板和钢带 |
China National Standards rolled |
English PDF |
| GB/T 25368-2023 |
Diesel engine electronically controlled common rail system high-pressure fuel supply pump assembly 柴油机电控共轨系统 高压供油泵总成 |
China National Standards rolled |
English PDF |
| GB/T 42678-2023 |
Hot rolled steel for oil and gas engineering 石油天然气工程用热轧型钢 |
China National Standards rolled |
English PDF |
| GB/T 34215-2023 |
Cold-rolled non-oriented electrical steel strip (sheet) for electric vehicle drive motor 电动汽车驱动电机用冷轧无取向电工钢带（片） |
China National Standards rolled |
English PDF |
| GB/T 20564.14-2023 |
High-strength cold-rolled steel plates and strips for automobiles Part 14: Low-density steel 汽车用高强度冷连轧钢板及钢带 第14部分：低密度钢 |
China National Standards rolled |
English PDF |
| GB/T 20564.13-2023 |
High-strength cold-rolled steel plates and strips for automobiles Part 13: Medium manganese steel 汽车用高强度冷连轧钢板及钢带 第13部分：中锰钢 |
China National Standards rolled |
English PDF |
| GB/T 42826-2023 |
Radio controlled clock signal reception test method 电波钟 信号接收测试方法 |
China National Standards rolled |
English PDF |
| GB/T 2523-2022 |
Method for measuring surface roughness, peak number and waviness of cold-rolled metal sheet and strip 冷轧金属薄板和薄带表面粗糙度、峰值数和波纹度测量方法 |
China National Standards rolled |
English PDF |
| GB/T 20564.6-2022 |
High-strength cold-rolled steel sheets and strips for automobiles—Part 6: Transformation-induced plasticity steels 汽车用高强度冷连轧钢板及钢带 第6部分：相变诱导塑性钢 |
China National Standards rolled |
English PDF |
| GB/T 20564.5-2022 |
High-strength cold-rolled steel sheets and strips for automobiles - Part 5: Isotropic steels 汽车用高强度冷连轧钢板及钢带 第5部分：各向同性钢 |
China National Standards rolled |
English PDF |
| GB/T 20564.4-2022 |
High-strength cold-rolled steel sheets and strips for automobiles - Part 4: Low-alloy high-strength steels 汽车用高强度冷连轧钢板及钢带 第4部分：低合金高强度钢 |
China National Standards rolled |
English PDF |
| GB/T 41408-2022 |
Sensory analysis methodology - General guidelines for testing consumer preferences in controlled areas 感官分析 方法学 受控区域消费者喜好测试一般导则 |
China National Standards rolled |
English PDF |
| GB/T 20887.5-2022 |
High strength hot rolled steel sheet and strip for automobile part 5: martensitic steel 汽车用高强度热连轧钢板及钢带 第5部分:马氏体钢 |
China National Standards rolled |
English PDF |
| GB/T 20887.4-2022 |
High strength hot rolled steel sheet and strip for automobile part 4: transformation induced plastic steel 汽车用高强度热连轧钢板及钢带 第4部分:相变诱导塑性钢 |
China National Standards rolled |
English PDF |
| GB/T 20887.3-2022 |
High strength hot rolled steel sheet and strip for automobile part 3: dual phase steel 汽车用高强度热连轧钢板及钢带 第3部分：双相钢 |
China National Standards rolled |
English PDF |
| GB/T 20887.2-2022 |
High strength hot rolled steel sheet and strip for automobile part 2: high reaming steel 汽车用高强度热连轧钢板及钢带 第2部分：高扩孔钢 |
China National Standards rolled |
English PDF |
| GB/T 20564.7-2022 |
High strength tandem cold rolled steel sheet and strip for automobile part 7: martensitic steel 汽车用高强度冷连轧钢板及钢带 第7部分：马氏体钢 |
China National Standards rolled |
English PDF |
| GB/T 4162-2022 |
Ultrasonic testing method for forged and rolled steel bars 锻轧钢棒超声检测方法 |
China National Standards rolled |
English PDF |
| GB/T 6893-2022 |
Aluminium and aluminium alloys cold drawn (rolled) tubes 铝及铝合金拉（轧）制管材 |
China National Standards rolled |
English PDF |
| GB/T 25915.15-2022 |
Clean rooms and related controlled environments - Part 15: Suitability assessment of equipment and materials by concentration of gaseous chemicals 洁净室及相关受控环境 第15部分： 按气态化学物浓度评定设备及材料的适用性 |
China National Standards rolled |
English PDF |
| GB/T 25915.14-2022 |
Clean rooms and related controlled environments - Part 14: Assessment of equipment suitability by particle concentration 洁净室及相关受控环境 第14部分：按粒子浓度评估设备适用性 |
China National Standards rolled |
English PDF |
| GB/T 25915.13-2022 |
Cleanrooms and related controlled environments - Part 13: Surface cleaning to particle and chemical cleanliness requirements 洁净室及相关受控环境 第13部分：达到粒子和化学洁净度要求的表面清洁 |
China National Standards rolled |
English PDF |
| GB/T 42125.19-2022 |
Safety requirements for electrical equipment for measurement, control and laboratory use - Part 19: Particular requirements for actuators of electrically controlled valves 测量、控制和实验室用电气设备的安全要求 第19部分：电动控制阀门执行器的特殊要求 |
China National Standards rolled |
English PDF |
| GB/T 41763-2022 |
Dimensions, shapes, weights and allowable deviations of twin-roll cast-rolled hot-rolled steel sheets and strips 双辊铸轧热轧薄钢板及钢带的尺寸、外形、重量及允许偏差 |
China National Standards rolled |
English PDF |
| GB/T 17396-2022 |
Hot-rolled seamless steel pipes for hydraulic props 液压支柱用热轧无缝钢管 |
China National Standards rolled |
English PDF |
| GB/T 41747-2022 |
Structural-grade and high-strength continuous hot-dip galvanized twin-roll cast-rolled steel sheet and strip 结构级和高强度连续热镀锌双辊铸轧薄钢板及钢带 |
China National Standards rolled |
English PDF |
| GB/T 41746-2022 |
Commercial-grade continuous hot-dip galvanized twin-roll cast-rolled steel sheet and strip 商品级连续热镀锌双辊铸轧薄钢板及钢带 |
China National Standards rolled |
English PDF |
| GB/T 41749-2022 |
General requirements for surface quality of hot-rolled section steel 热轧型钢表面质量一般要求 |
China National Standards rolled |
English PDF |
| GB/T 40383-2021 |
Hot-rolled twin-roll cast carbon steel sheet and strip of commercial quality 商品级双辊铸轧热轧碳素钢薄钢板及钢带 |
China National Standards rolled |
English PDF |
| GB/T 40410-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled method 金属材料 多轴疲劳试验 轴向-扭转应变控制方法 |
China National Standards rolled |
English PDF |
| GB/T 40282-2021 |
Hot-rolled twin roll cast steel sheets and strips of structural quality and high strength steel 结构级和高强度双辊铸轧热轧薄钢板及钢带 |
China National Standards rolled |
English PDF |
| GB/T 25915.8-2021 |
Cleanrooms and associated controlled environments—Part 8: Classification of air cleanliness by chemical concentration (ACC) 洁净室及相关受控环境 第8部分：按化学物浓度划分空气洁净度(ACC)等级 |
China National Standards rolled |
English PDF |
| GB/T 25915.2-2021 |
Cleanrooms and associated controlled environments—Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration 洁净室及相关受控环境 第2部分：洁净室空气粒子浓度的监测 |
China National Standards rolled |
English PDF |
| GB/T 25915.1-2021 |
Cleanrooms and associated controlled environments—Part 1: Classification of air cleanliness by particle concentration 洁净室及相关受控环境 第1部分：按粒子浓度划分空气洁净度等级 |
China National Standards rolled |
English PDF |
| GB/T 25915.10-2021 |
Cleanrooms and associated controlled environments—Part 10: Classification of surface cleanliness by chemical concentration 洁净室及相关受控环境 第10部分：按化学物浓度划分表面洁净度等级 |
China National Standards rolled |
English PDF |
| GB/T 8749-2021 |
Hot-rolled quality carbon structural steel strip 优质碳素结构钢热轧钢带 |
China National Standards rolled |
English PDF |
| GB/T 3639-2021 |
Seamless cold-drawn or cold-rolled steel tubes for precision applications 冷拔或冷轧精密无缝钢管 |
China National Standards rolled |
English PDF |
| GB/T 3075-2021 |
Metallic materials—Fatigue testing—Axial force-controlled method 金属材料 疲劳试验 轴向力控制方法 |
China National Standards rolled |
English PDF |
| GB/T 26077-2021 |
Metallic materials—Fatigue testing—Axial-strain-controlled method 金属材料 疲劳试验 轴向应变控制方法 |
China National Standards rolled |
English PDF |
| GB/T 39856-2021 |
Hot rolled titanium and titanium alloy seamless tubes 热轧钛及钛合金无缝管材 |
China National Standards rolled |
English PDF |
| GB/T 17421.10-2021 |
Test code for machine tools -- Part 10: Determination of the measuring performance of probing systems of numerically controlled machine tools 机床检验通则 第10部分：数控机床探测系统测量性能的测定 |
China National Standards rolled |
English PDF |
| GB/T 2585-2021 |
Hot-rolled steel rails for railway 铁路用热轧钢轨 |
China National Standards rolled |
English PDF |
| GB/T 41154-2021 |
Metallic materials—Multiaxial fatigue testing—Axial-torsional strain-controlled thermo-mechanical fatigue testing method 金属材料 多轴疲劳试验 轴向-扭转应变控制热机械疲劳试验方法 |
China National Standards rolled |
English PDF |
| GB/T 3836.32-2021 |
Explosive atmospheres—Part 32:Intrinsically safe systems with electronically controlled spark duration limitation 爆炸性环境 第32部分：电子控制火花时限本质安全系统 |
China National Standards rolled |
English PDF |
| GB/T 12274.4-2021 |
Quartz crystal controlled oscillators of assessed quality—Part 4: Sectional specification—Capability approval 有质量评定的石英晶体振荡器 第4部分:分规范 能力批准 |
China National Standards rolled |
English PDF |
| GB/T 40868-2021 |
Planning and design of controlled environments for research and production at the nanometer scale 纳米尺度科研生产受控环境规划与设计 |
China National Standards rolled |
English PDF |
| GB/T 25915.12-2021 |
Cleanrooms and associated controlled environments—Part 12: Specifications for monitoring of air cleanliness by nanoscale particle concentration 洁净室及相关受控环境 第12部分：监测空气中纳米粒子浓度的技术要求 |
China National Standards rolled |
English PDF |
| GB/T 8601-2021 |
Forged and rolled solid wheels for railway 铁路用辗钢整体车轮 |
China National Standards rolled |
English PDF |
| GB/T 20933-2021 |
Hot rolled sheet pile 热轧钢板桩 |
China National Standards rolled |
English PDF |
| GB/T 39521-2020 |
Tractors and machinery for agriculture—Auto-guidance systems for operator-controlled tractors and self-propelled machines—Safety requirements 农业拖拉机和机械 拖拉机和自走式机械的自动导航系统 安全要求 |
China National Standards rolled |
English PDF |
| GB/T 22869-2020 |
Interleaving paper for cold rolled metal sheets 冷轧金属板衬纸 |
China National Standards rolled |
English PDF |
| GB/T 38960-2020 |
Cryogenic-resistant controlled expansion alloys 耐低温定膨胀合金 |
China National Standards rolled |
English PDF |
| GB/T 38933-2020 |
Cold rolled steel sheet for automobile—Test method of phosphate conversion coatings 汽车用冷轧钢板 磷酸盐转化膜试验方法 |
China National Standards rolled |
English PDF |
| GB/T 38813-2020 |
General requirements for hot-rolled pickled steel sheet and strip 热轧酸洗钢板及钢带的一般要求 |
China National Standards rolled |
English PDF |
| GB/T 38749-2020 |
Technical requirements of controlled atmosphere heat treatment 可控气氛热处理技术要求 |
China National Standards rolled |
English PDF |
| GB/T 38737-2020 |
Plastics—Determination of the ultimate anaerobic biodegradation of plastic materials in controlled slurry digestion systems—Method by measurement of biogas production 塑料 受控污泥消化系统中材料最终厌氧生物分解率测定 采用测量释放生物气体的方法 |
China National Standards rolled |
English PDF |
| GB/T 38690-2020 |
Corrosion-resistant alloy hot-rolled sheets and strips 耐蚀合金热轧薄板及带材 |
China National Standards rolled |
English PDF |
| GB/T 38689-2020 |
Corrosion-resistant alloy cold-rolled sheets and strips 耐蚀合金冷轧薄板及带材 |
China National Standards rolled |
English PDF |
| GB/T 38688-2020 |
Corrosion-resistant alloy of hot rolled plates 耐蚀合金热轧厚板 |
China National Standards rolled |
English PDF |
| GB/T 24595-2020 |
Hot-rolled steel bars for quenched and tempered automobile crankshafts 汽车调质曲轴用热轧钢棒 |
China National Standards rolled |
English PDF |
| GB 9706.217-2020 |
Medical electrical equipment—Part 2-17: Particular requirements for the basic safety and essential performance of automatically-controlled brachytherapy afterloading equipment 医用电气设备 第2-17部分：自动控制式近距离治疗后装设备的基本安全和基本性能专用要求 |
China National Standards rolled |
English PDF |
| GB/T 38347-2019 |
Hot-rolled wire rod of ultra-low carbon steel with high boron 超低碳高硼钢热轧盘条 |
China National Standards rolled |
English PDF |
| GB/T 38364.2-2019 |
Garden equipment—Safety requirements for combustion-engine-powered lawnmowers—Part 2:Pedestrian-controlled lawnmowers 园林机械 以内燃机为动力的草坪修剪机安全要求 第2部分：步进式草坪修剪机 |
China National Standards rolled |
English PDF |
| GB/T 38347-2019 |
Hot-rolled wire rod of ultra-low carbon steel with high boron 超低碳高硼钢热轧盘条 |
China National Standards rolled |
English PDF |
| GB/T 37892-2019 |
Digital integrated full frequency conversion controlled constant pressure water supply equipment 数字集成全变频控制恒压供水设备 |
China National Standards rolled |
English PDF |
| GB/T 37800-2019 |
Hot rolled longitudinally profiled steel plate 热轧纵向变厚度钢板 |
China National Standards rolled |
English PDF |
| GB/T 37622-2019 |
Hot rolled steel bar of fire resistant for the reinforcement of concrete 钢筋混凝土用热轧耐火钢筋 |
China National Standards rolled |
English PDF |
| GB/T 37616-2019 |
Aluminium alloys extruded profiles-axial force controlled fatigue testing method 铝合金挤压型材轴向力控制疲劳试验方法 |
China National Standards rolled |
English PDF |
| GB/T 37601-2019 |
Hot rolled steel sheet and strip of alloy structure steel 合金结构钢热连轧钢板和钢带 |
China National Standards rolled |
English PDF |
| GB/T 37593-2019 |
Cold-rolled grain-oriented electrical steel strip specialized for UHV transformers 特高压变压器用冷轧取向电工钢带 |
China National Standards rolled |
English PDF |
| GB/T 37591-2019 |
Cold-rolled non-grain oriented electrical steel strip specialized for large generators with power of 700MW or higher 700MW及以上级大电机用冷轧无取向电工钢带 |
China National Standards rolled |
English PDF |
| GB/T 37501-2019 |
Brass wires for unidirectional travelling wire electrical-discharge machining in numerically controlled machines 数控机床用单向走丝电火花加工用黄铜线 |
China National Standards rolled |
English PDF |
| GB/T 25832-2019 |
Hot rolled steel plate and strip for porcelain enameling 搪瓷用热轧钢板和钢带 |
China National Standards rolled |
English PDF |
| Find out:350Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |
+86-755-25831330
