China National Standards		 HOME  CONTACT US to PC vesion

'gene'
China GB Standards List

 GB/T 39730-2020  
general requirements for cell counting—Flow cytometry
细胞计数通用要求 流式细胞测定法
 GB/T 39625-2020  
Sensory analysis—Methodology—general guidance for establishing a sensory profile
感官分析 方法学 建立感官剖面的导则
 GB/T 39692-2020  
Rubber,vulcanized or thermoplastic—Low temperature testing—general introduction and guide
硫化橡胶或热塑性橡胶 低温试验 概述与指南
 GB/T 39631-2020  
general specification for servo motor system in air conditioning compressor of new energy vehicles
新能源汽车空调压缩机用伺服电动机系统通用规范
 GB/T 18779.6-2020  
Geometrical product specifications (GPS)—Inspection by measurement of workpieces and measuring equipment—Part 6: generalized decision rules for the acceptance and rejection of instruments and workpieces
产品几何技术规范（GPS） 工件与测量设备的测量检验 第6部分：仪器和工件接受/拒收的通用判定规则
 GB/T 39722-2020  
Superconducting electronic devices—generic specification for sensors and detectors
超导电子器件 传感器和探测器通用规范
 GB/T 39633-2020  
general specification for integrated servo motors system for cooperative robot
协作机器人用一体式伺服电动机系统通用规范
 GB/T 39729-2020  
general requirements for measurement of cell purity—Flow cytometry
细胞纯度测定通用要求 流式细胞测定法
 GB/T 39590.1-2020  
Robot reliability—Part 1: general guidelines
机器人可靠性 第1部分：通用导则
 GB/T 39587-2020  
general requirements for electrostatic discharge protection management
静电防护管理通用要求
 GB/T 39581-2020  
Biological disaster prevention and early warning system based on public communication network—general technical requirements for networking
基于公用通信网的生物灾害防治和预警系统 联网总体技术要求
 GB/T 39568-2020  
general requirements for drive micro motors
驱动微电机通用技术要求
 GB/T 39567-2020  
general specification for brushless servo motor systems for multi-rotor unmanned aircraft
多旋翼无人机用无刷伺服电动机系统通用规范
 GB/T 39561.1-2020  
Interconnection and interoperation of numerical control equipment—Part 1: general technical requirement
数控装备互联互通及互操作 第1部分：通用技术要求
 GB/T 39559.1-2020  
Specifications for operational monitoring of urban rail transit facilities—Part 1: general
城市轨道交通设施运营监测技术规范 第1部分：总则
 GB/T 39515.1-2020  
Agricultural and forestry machinery—Environmental requirements for sprayers—Part 1: general
农林机械 喷雾机的环境要求 第1部分：通用要求
 GB/T 39553-2020  
general specification for DC servo motors
直流伺服电动机通用技术条件
 GB/T 39572.1-2020  
Bi-directional grid-connected power converters—Part 1: general requirements
并网双向电力变流器 第1部分：通用要求
 GB/T 39673.1-2020  
Home and building electronic systems (HBES) and building automation and control systems (BACS) — Part 1: general requirements
住宅和楼宇电子系统（HBES）及楼宇自动化和控制系统（BACS） 第1部分：通用要求
 GB-38598-2020  
Disinfection general requirements for product labels and instructions
消毒产品标签说明书通用要求
 GB/T 39334.1-2020  
Digital simulation of mechanical products manufacturing process—Part 1: general requirements
机械产品制造过程数字化仿真 第1部分：通用要求
 GB/T 39408-2020  
Electronic jetting dispenser robot system—general specifications
电子喷胶机器人系统 通用技术条件
 GB/T 39407-2020  
Grinding and polishing robot system—general specification
研磨抛光机器人系统 通用技术条件
 GB/T 39404-2020  
Information security general requirement for control unit of industrial robot
工业机器人控制单元的信息安全通用要求
 GB/T 39399-2020  
general specification for BeiDou navigation satellite system geodetic receiver
北斗卫星导航系统测量型接收机通用规范
 GB/T 39410-2020  
general specification for GNSS geodetic receivers onboard low earth orbit satellite
低轨星载GNSS测量型接收机通用规范
 GB/T 39400-2020  
Industrial data quality—general technical specification
工业数据质量 通用技术规范
 GB/T 39425-2020  
general technical specfication for the permanent magnetic direct drive motor bogie of urban rail transit
城市轨道交通车辆永磁直驱转向架通用技术条件
 GB/T 39426-2020  
general technical specification for permanent magnetic direct drive motor vehicles of urban rail transit
城市轨道交通永磁直驱车辆通用技术条件
 GB/T 273.3-2020  
Rolling bearings—Boundary dimensions，general plan—Part 3:Radial bearings
滚动轴承 外形尺寸总方案 第3部分：向心轴承
 GB/T 5169.29-2020  
Fire hazard testing for electric and electronic products—Part 29: Heat release—general guidance
电工电子产品着火危险试验 第29部分：热释放 总则
 GB/T 39381.1-2020  
Cardiovascular implants—Vascular device-drug combination products—Part 1：general requirements
心血管植入物 血管药械组合产品 第1部分：通用要求
 GB/T 7251.8-2020  
Low-voltage switchgear and controlgear assemblies—Part 8: general technical requirements for intelligent assembly
低压成套开关设备和控制设备 第8部分：智能型成套设备通用技术要求
 GB/T 27400-2020  
Conformity assessment--general rules for service certification techniques
合格评定 服务认证技术通则
 GB/T 5862-2020  
Agricultural tractors and machinery—general purpose quick-action hydraulic couplers
农业拖拉机和机械 通用液压快换接头
 GB/T 39315.5-2020  
general resource of military and civilian—Data model—Part 5: Person
军民通用资源 数据模型 第5部分：人员类
 GB/T 39491-2020  
general technical requirements of carbon fiber composites covering parts for automobiles
汽车用碳纤维复合材料覆盖部件通用技术要求
 GB/T 39486-2020  
Chemical reagent—general rules for inductively coupled plasma mass spectrometry
化学试剂 电感耦合等离子体质谱分析方法通则
 GB/T 39304-2020  
general technical specification for sample pre-treatment of biological toxicity detection in reclaimed water
再生水生物毒性检测的样品前处理通用技术规范
 GB/T 39303-2020  
general technical specification for pre-treatment of microorganism samples in wastewater treatment system
废水处理系统微生物样品前处理通用技术规范
 GB/T 39188-2020  
general technical specification of electric windows and doors (gates)
电动门窗通用技术要求
 GB/T 5211.6-2020  
general methods of test for pigments and extenders—Part 6: Determination of pH value of an aqueous suspension
颜料和体质颜料通用试验方法 第6部分：水悬浮液pH值的测定
 GB/T 26949.1-2020  
Industrial trucks—Verification of stability—Part 1: general
工业车辆 稳定性验证 第1部分：总则
 GB/T 28029.1-2020  
Electronic railway equipment--Train communication network (TCN)--Part 1: general architecture
轨道交通电子设备 列车通信网络（TCN） 第1部分：基本结构
 GB/T 17989.1-2020  
Control charts--Part 1: general guidelines
控制图 第1部分：通用指南
 GB/T 39444-2020  
general framework for standard system of public credit information
公共信用信息标准总体架构
 GB/T 38477-2020  
Determination of gene expression—Western blot
基因表达的测定 蛋白印迹法
 GB/T 24986.1-2020  
Testing evaluation methods for reliability on household and similar electrical appliances —Part 1：general requirements
家用和类似用途电器可靠性试验及评价 第1部分：通用要求
 GB/T 17888.1-2020  
Safety of machinery—Permanent means of access to machinery—Part 1: Choice of fixed means and general requirements of access
机械安全 接近机械的固定设施 第1部分：固定设施的选择及接近的一般要求
 GB/T 5211.3-2020  
general methods of test for pigments and extenders—Part 3: Determination of matter volatile at 105℃
颜料和体质颜料通用试验方法 第3部分：105℃挥发物的测定

Find out:4239Items   |   First -Previous-Next -Last  | [14] [15] [16] [17] [18] [19] [20]

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        sales@gbstandards.org 
© Copyright  2001-2021 All Rights Reserved