China National Standards
HOME
CONTACT US
to PC vesion
GB Standards
CNS Standards
China HS code & Tariff
'of'
China GB Standards List
GB/T 28192-2011
Surface active agents - Detergents - Determination
of
anionic-active matter hydrolyzable and non-hydrolyzable under acid conditions
表面活性剂 洗涤剂 在酸性条件下可水解和不可水解的阴离子活性物的测定
GB/T 27969-2011
The system
of
assess and the method of monitor for the energy consumption per unit products of architecture and sanitary ceramics
建筑卫生陶瓷单位产品能耗评价体系和监测方法
GB/T 27970-2011
Test method for weight loss
of
non-metallic gasket materials upon exposure to elevated temperatures
非金属垫片材料烧失量试验方法
GB/T 27973-2011
Methods for chemical analysis
of
volatilized silica
硅灰的化学分析方法
GB/T 27974-2011
Methods for chemical analysis
of
fly ash and coal gangue as building material
建材用粉煤灰及煤矸石化学分析方法
GB/T 27975-2011
Methods for chemical analysis
of
granulated blastfurnace slag
粒化高炉矿渣的化学分析方法
GB/T 27977-2011
Test and calculation methods
of
electricity efficiency of cement production
水泥生产电能能效测试及计算方法
GB/T 27978-2011
Determination
of
the waste content in the raw mix of cement
水泥生产原料中废渣用量的测定方法
GB/T 28112-2011
Determination
of
residual dimethylcyclosiloxane volatiles in silicone rubber
硅橡胶中挥发性甲基环硅氧烷残留量的测定
GB/T 28122-2011
Polyvinyl alcohol (PVA) films for liquid crystal display(LCD)-Determination
of
thickness
液晶显示器(LCD)用聚乙烯醇(PVA)膜 厚度测定方法
GB/T 28124-2011
Determination
of
trace hydrogen,oxygen,methane and carbon monoxide in the inert gases - Gas chromatographic method
惰性气体中微量氢、氧、甲烷、一氧化碳的测定 气相色谱法
GB/T 28125.1-2011
Determination
of
hazardous materials in air separation process - Part 1: Determination of hydrocarbons
空分工艺中危险物质的测定 第1部分:碳氢化合物的测定
GB/T 27945.3-2011
The management
of
hazardous solid wastes from heat treatment salts Part 3 :Method of innocent treatment
热处理盐浴有害固体废物的管理 第3部分:无害化处理方法
GB/T 4472-2011
Detemination
of
density and relative density for chemical products
化工产品密度、相对密度的测定
GB/T 27945.2-2011
The management
of
hazardous solid wastes from heat treatment salts Part 2:Test method of extractives
热处理盐浴有害固体废物的管理 第2部分:浸出液检测方法
GB/T 5832.3-2011
Determination
of
moisture in gases - Part 3: The method of Cavity Ring-Down Spectroscopy
气体中微量水分的测定 第3部分:光腔衰荡光谱法
GB/T 6075.3-2011
Mechanical vibration - Evaluation
of
machine vibration by measurements on non-rotating parts - Part 3:Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ
机械振动 在非旋转部件上测量评价机器的振动 第3部分:额定功率大于15kW额定转速在120 r/min至15000r/min之间的在现场测量的工业机器
GB/T 8923.1-2011
Preparation
of
steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou
涂覆涂料前钢材表面处理 表面清洁度的目视评定 第1部分:未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级
GB/T 9799-2011
Metallic and other inorganic coatings - Electroplated coatings
of
zinc with supplementary treatments on iron or steel
金属及其他无机覆盖层 钢铁上经过处理的锌电镀层
GB 27701-2011
Mechanical safety
of
cathode ray tubes
阴极射线管机械安全
GB 27789-2011
Thermoplastic polyolefin sheets for waterpro
of
ing
热塑性聚烯烃(TPO)防水卷材
GB 11929-2011
Regulations for designing storage building
of
high level radioactive liquid waste
高水平放射性废液贮存厂房设计规定
GB 12952-2011
Polyvinyl chloride plastic sheets for waterpro
of
ing
聚氯乙烯(PVC)防水卷材
GB 17258-2011
Steel cylinders for the on-board storage
of
compressed natural gas as a fuel for automotive vehicles
汽车用压缩天然气钢瓶
GB 28051-2011
Regulation for filling
of
welded insulated cylinder
焊接绝热气瓶充装规定
GB 28052-2011
Regulation for filling
of
non-refillable steel welded cylinder
非重复充装焊接钢瓶充装规定
GB/T 28086-2011
Detection and identification
of
Longidorus spp. as virus vectors
长针线虫属(传毒种类)检疫鉴定方法
GB/T 3681-2011
Plastics methods
of
exposure to direct weathering, to weathering using glass-filtered daylight, and to intensified weathering by daylight using Fresnel mirrors
塑料 自然日光气候老化、玻璃过滤后日光气候老化和菲涅耳镜加速日光气候老化的暴露试验方法
GB/T 27674-2011
Copper,lead and zinc sulfide concentrates - Determination
of
hygroscopic moisture in the analysis sample - ?Gravimetric method
硫化铜、铅和锌精矿 试样中湿存水分的测定 重量法
GB/T 28197-2011
Methods for characterising tristimulus colorimeters for measuring the colour
of
light
测量光源颜色用三刺激值色度计的表征方法
GB/T 28201-2011
Assessment code for energy consumption
of
laundry powders manufacture
合成洗衣粉生产能耗评定规范
GB/T 28203-2011
Technical requirements and test methods
of
furniture connectors
家具用连接件技术要求及试验方法
GB/T 11348.3-2011
Mechanical vibration - Evaluation
of
machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines
机械振动 在旋转轴上测量评价机器的振动 第3部分:耦合的工业机器
GB/T 12613.7-2011
Plain bearings - Wrapped bushes - Part 7:Measurement
of
wall thickness of thin-walled bushes
滑动轴承 卷制轴套 第7部分:薄壁轴套壁厚测量
GB/T 12716-2011
Pipe threads with the thread angle
of
60 degrees where pressure-tight joints are made on threads
60°密封管螺纹
GB/T 13288.2-2011
Preparation
of
steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure
涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法
GB/T 17850.6-2011
Preparation
of
steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag
涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣
GB/T 18570.6-2011
Preparation
of
steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法
GB/T 20485.31-2011
Methods for the calibration
of
vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity
振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试
GB/T 27613-2011
Hydraulic fluid power - Fluid contamination - Determination
of
particulate contamination by the gravimetric method
液压传动 液体污染 采用称重法测定颗粒污染度
GB/T 27670-2011
Clad aluminium alloy welded tubes for heat exchangers
of
vehicles
车辆热交换器用复合铝合金焊管
GB/T 27946-2011
Limited value
of
hazardous substance in the air of heat treatment working place
热处理工作场所空气中有害物质的限值
GB/T 27673-2011
Copper,lead,zinc and nickel concentrates - Determination
of
mass loss of bulk material on drying
硫化铜、铅、锌和镍精矿 散装干物料质量损失的测定
GB/T 28196-2011
Determination
of
annealing point and strain point for glass
玻璃退火点和应变点测试方法
GB/T 27678-2011
The technical specification
of
waste water recycle fo hydrometallurgical zinc enterprise
湿法炼锌企业废水循环利用技术规范
GB/T 27679-2011
Copper, lead, zinc and nickel concentrates - Experimental methods for checking the precision
of
sampling
铜、铅、锌和镍精矿 检查取样精密度的实验方法
GB/T 27680-2011
Copper,lead ,zinc and nickel concentrates - Experimental methods for checking the bias
of
sampling
铜、铅、锌和镍精矿 检查取样误差的实验方法
GB/T 27681-2011
Specification on zero emissions and recycling
of
cooling water during melting and casting for copper and copper alloy
铜及铜合金熔铸冷却水零排放和循环利用规范
GB/T 27683-2011
Specifications for recovery
of
cutting filings of free-cutting copper alloys
易切削铜合金切削废屑回收规范
GB/T 27687-2011
Scraps
of
molybdenum and molybdenum alloy
钼及钼合金废料
Find out:
27688
Items
|
First
-
Previous
-
Next
-
Last
|
[288]
[289]
[290]
[291]
[292]
[293]
[294]
www.rjs.cn
transcustoms.com
gbstandards.org
-
Since 2001
-
+86-755-25831330
[email protected]
© Copyright 2001-2021 All Rights Reserved