China National Standards		 HOME  CONTACT US to PC vesion

'steel'
China GB Standards List

 GB/T 20100-2006  
Stainless steel fiber sintering medium
不锈钢纤维烧结滤毡
 GB/T 222-2006  
Permissible tolerances for chemical composition of steel products
钢的成品化学成分允许偏差
 GB/T 8706-2006  
steel wire ropes - Vocabulary, designation and classification
钢丝绳-术语、标记和分类
 GB/T 20067-2006  
Large diameter steel wire ropes
粗直径钢丝绳
 GB/T 14291-2006  
Welded steel tubes for mine liquid service
矿山流体输送用电焊钢管
 GB 16487.6-2005  
Environmental protection control standard for imported solid wastes as raw materials -- Waste and scrap of iron and steel
进口可用作原料的固体废物环境保护控制标准 废钢铁
 GB 8903-2005  
steel wire ropes for elevators
电梯用钢丝绳
 GB/T 19976-2005  
Textiles-Determination of bursting strength-steel ball method
纺织品 顶破强力的测定 钢球法
 GB/T 20016-2005  
Metallic and other inorganic coatings -- Electropolishing as a means of smoothing and passivating stainless steel
金属和其它无机覆盖层 不锈钢部件平整和钝化的电抛光法
 GB/T 19879-2005  
steel Plates For Building Structure
建筑结构用钢板
 GB/T 10857-2005  
steel roller chains,types S and C,attachments and sprockets
S型和C型钢制滚子链条，附件和链轮
 GB/T 13401-2005  
steel plate butt-welding pipe fittings
钢板制对焊管件
 GB/T 12224-2005  
General requirements for industrial steel valves
钢制阀门 一般要求
 GB/T 5754.2-2005  
steel cord conveyor belt -- Longitudinal test -- Part 2: Measurement of tensile strength
钢丝绳芯输送带 纵向拉伸试验 第2部分:拉伸强度的测定
 GB/T 18570.5-2005  
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method)
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分：涂覆涂料前钢材表面的氯化物测定(离子探测管法)
 GB/T 18570.10-2005  
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分：水溶性氯化物的现场滴定测定法
 GB/T 19816.7-2005  
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定
 GB/T 18570.3-2005  
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method)
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分：涂覆涂料前钢材表面的灰尘评定(压敏粘带法)
 GB/T 18570.8-2005  
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分：湿气的现场折射测定法
 GB/T 18570.9-2005  
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts
涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分：水溶性盐的现场电导率测定法
 GB/T 19816.6-2005  
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定
 GB/T 19816.5-2005  
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定
 GB/T 19869.1-2005  
Welding procedure qualification test for steels,nickel and nickel alloys
钢、镍及镍合金的焊接工艺评定试验
 GB/T 9451-2005  
Determination of total or effective thickness of thin surface hardened layers of steel parts
钢件薄表面总硬化层深度或有效硬化层深度的测定
 GB/T 9450-2005  
steels-Determination and verification of the depth of carburized and hardened cases
钢件渗碳淬火硬化层深度的测定和校核
 GB/T 5617-2005  
Determination of effective depth of hardening after induction or flame hardening of steel
钢的感应淬火或火焰淬火后有效硬化层深度的测定
 GB/T 3524-2005  
Hot-rolled carbon and low alloy structural steel strips
碳素结构钢和低合金结构钢热轧钢带
 GB/T 3273-2005  
Hot-rolled steel plates(sheets)and strips for automobile frames
汽车大梁用热轧钢板和钢带
 GB/T 11354-2005  
Determination of nitrided case depth and metallographic microstructure examination for steel iron parts
钢铁零件 渗氮层深度测定和金相组织检验
 GB/T 12230-2005  
General purpose industrial valves-Specification of stainless steel castings
通用阀门 不锈钢铸件技术条件
 GB/T 12229-2005  
General Purpose industrial valves-Specification of carbon steel castings
通用阀门 碳素钢铸件技术条件
 GB/T 12612-2005  
General specification for multifunctional solution of iron and steel surface treatment
多功能钢铁表面处理液通用技术条件
 GB/T 19816.4-2005  
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定
 GB/T 19816.3-2005  
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定
 GB/T 19816.2-2005  
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定
 GB/T 19816.1-2005  
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling
涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样
 GB/T 10752-2005  
Marine steel butt-welding fittings
船用钢管对焊接头
 GB/T 5223.3-2005  
steel bars prestressed concrete
预应力混凝土用钢棒
 GB/T 10561-2005  
steel-Determination of content of nonmetallic inclusions-Micrographic method using standards diagrams
钢中非金属夹杂物含量的测定--标准评级图显微检验法
 GB/T 19743-2005  
Water atomized pure iron powder and alloyed steel powder for powder metallurgy
粉末冶金用水雾化纯铁粉、合金钢粉
 GB/T 19748-2005  
steel-Charpy V-notch pendulum impact test-Instrumented test method
钢材夏比V型缺口摆锤冲击试验 仪器化试验方法
 GB/T 19744-2005  
Determining of plane-strain crack-arrest fracture toughness,K Ia,for ferritic steels
铁素体钢平面应变止裂韧度 K Ia 试验方法
 GB/T 12459-2005  
steel butt-welding seamless pipe fittings
钢制对焊无缝管件
 GB 15066-2004  
Stainless steel pressure cooker
不锈钢压力锅
 GB/T 19554.1-2004  
Textile machinery and accessories--Main dimension of open end loop flat steelhealds and their corresponding heald-carrying rods--Part 1:C-shapes end loops
纺织机械与附件 开口式综耳钢片综及相应穿综杆的主要尺寸 第1部分:C型综耳
 GB/T 19554.3-2004  
Textile machinery and accessories--Main dimensions of open end loop flat steel healds and their corresponding heald-carrying rods--Part 3:Carrying rod for healds with C-and J-shaped end loops
纺织机械与附件 开口式综耳钢片综及相应穿综杆的主要尺寸 第3部分:C型和J型综耳钢片综用穿综杆
 GB/T 19554.2-2004  
Textile machinery and accessories--Main dimension of open end loop flat steelhealds and their corresponding heald-carrying rods--Part 2:J-shapes end loops
纺织机械与附件 开口式综耳钢片综及相应穿综杆的主要尺寸 第2部分:J型综耳
 GB/T 7734-2004  
Method for ultrasonic testing of clad steel plates
复合钢板超声波检验方法
 GB 19533-2004  
Periodic inspection and evaluation of steel gas cylinders for the on board storage of compressed natural gas as a fuel
汽车用压缩天然气钢瓶定期检验与评定
 GB 4223-2004  
Iron and steel scraps
废钢铁

Find out:1771Items   |   First -Previous-Next -Last  | [26] [27] [28] [29] [30] [31] [32]

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        [email protected] 
© Copyright  2001-2021 All Rights Reserved