China National Standards
HOME
CONTACT US
to PC vesion
GB Standards
CNS Standards
China HS code & Tariff
'of'
China GB Standards List
GB/T 21994.4-2008
Chemical analysis
of
magnesium fluoride - Part 4: Determination of magnesium - EDTA volumetric method
氟化镁化学分析方法 第4部分：镁含量的测定 EDTA容量法
GB/T 18207.1-2008
Terminology
of
protecting against and mitigating earthquake disasters - Part 1:Basic terms
防震减灾术语 第1部分：基本术语
GB/T 11880-2008
Specification
of
large die-blocks used for die-forging hammer and mechanical forging press
模锻锤和大型机械锻压机用模块技术条件
GB/T 21981-2008
Determination
of
hormone multiresidues in foodstuffs of animal origin - LC-MS/MS method
动物源食品中激素多残留检测方法 液相色谱-质谱/质谱法
GB/T 21982-2008
Determination
of
residues of zearalanol, β-zearalanol, α-zearalenol, β-zearalenol, zearalanone and zearalenone in foodstuffs of animal origin - LC-MS/MS method
动物源食品中玉米赤霉醇、β-玉米赤霉醇、α-玉米赤霉烯醇、β-玉米赤霉烯醇、玉米赤霉酮和玉米赤霉烯酮残留量检测方法 液相色谱-质谱/质谱法
GB/T 6743-2008
Plastics(polyester resins) and paints and varnishes(binders) - Determination
of
partial acid value and total acid value
塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定
GB/T 6488-2008
Liquid chemicals - Determination
of
refrative index at 20℃
液体化工产品 折光率的测定(20℃)
GB/T 6324.5-2008
Test method
of
organic chemical products - Part 5: Determination of trace quantities of carbonyl compounds in organic chemicals
有机化工产品试验方法 第5部分：有机化工产品中羰基化合物含量的测定
GB/T 5211.11-2008
Determination
of
water-soluble sulfates, chlorides and nitrates of pigments
颜料水溶硫酸盐、氯化物和硝酸盐的测定
GB/T 5832.2-2008
Determination
of
moisture in gases - Part 2:Dew point method
气体中微量水分的测定 第2部分：露点法
GB/T 533-2008
Rubber,vulcanized or thermoplastic - Determination
of
density
硫化橡胶或热塑性橡胶 密度的测定
GB/T 532-2008
Rubber, vulcanized or thermoplastic - Determination
of
adhesion to textile fabric
硫化橡胶或热塑性橡胶与织物粘合强度的测定
GB/T 6744-2008
Binders for paints and varnishes - Determination
of
saponification value - Titrmetric method
色漆和清漆用漆基 皂化值的测定 滴定法
GB/T 529-2008
Rubber,vulcanized or thermoplastic - Determination
of
tear strength（Trouser，angle and crescent test pieces）
硫化橡胶或热塑性橡胶撕裂强度的测定（裤形、直角形和新月形试样）
GB/T 8295-2008
Natural Rubber and latex - Determination
of
copper content - Photometric method
天然橡胶和胶乳 铜含量的测定 光度法
GB/T 5211.5-2008
Method for the determination
of
resistance to materials of pigments
颜料耐性测定法
GB/T 1721-2008
Determination
of
appearance and transparency of varnishes, boiled oils and thinners
清漆、清油及稀释剂外观和透明度测定法
GB/T 1766-2008
Paints and varnishes - Rating schemes
of
degradation of coats
色漆和清漆 涂层老化的评级方法
GB/T 21910-2008
Method for measuring relative wet grip performance
of
passenger car tyres
轿车轮胎湿路面相对抓着性能试验方法
GB/T 21989-2008
Plastics - Poly(vinyl chloride)pastes - Determination
of
apparent viscosity using the severs rheometer
塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度
GB/T 21990-2008
Polyvinyl chloride (PVC) pastes - Determination
of
fineness of grind
聚氯乙烯（PVC）糊 刮板细度的测定
GB/T 21991-2008
Plastics - Preparation
of
PVC paste for test purpose - Planetary-mixer method
塑料 试验用聚氯乙烯（PVC）糊的制备 行星混合器法
GB/T 21992-2008
Polyvinyl chloride resins for Paste - Determination
of
number of impurities particles and foreign particles
糊用聚氯乙烯树脂 杂质与外来粒子数的测定
GB/T 21993-2008
Polyvinyl chloride resins - Determination
of
the content of methanol or ethanol extract
聚氯乙烯树脂 甲醇或乙醇萃取物含量的测定
GB/T 4611-2008
Determination method
of
"fish eyes"for polyvinyl chloride resins of general use
通用型聚氯乙烯树脂“鱼眼”的测定方法
GB/T 531.1-2008
Rubber, vulcanized or thermoplastic - Determination
of
indentation hardness - Part 1：Duromerer method （Shore hardness）
硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分：邵氏硬度计法（邵尔硬度）
GB/T 1668-2008
Plasticizers - Determination
of
acid value and acidity
增塑剂酸值及酸度的测定
GB/T 10707-2008
Rubber - Determination
of
the burning
橡胶燃烧性能的测定
GB/T 1192-2008
Techincal specification
of
agricultural tyres
农业轮胎技术条件
GB/T 12830-2008
Rubber，vulcanized or thermoplastic - Determination
of
shear modulus and adhesion to rigid plates - Quadruple shear methods
硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法
GB/T 5208-2008
Determination
of
flash point - Rapid equilibrium closed cup method
闪点的测定 快速平衡闭杯法
GB/T 13248-2008
Rubber and rubber latices - Determination
of
manganese content - Sodium periodate photometric methodes
橡胶和胶乳 锰含量的测定 高碘酸钠光度法
GB/T 13893-2008
Paints and varnishes - Determination
of
resistnace to humidity - Continuous condensation
色漆和清漆 耐湿性的测定 连续冷凝法
GB/T 16881-2008
Coagulation-Deposition jar test
of
water
水的混凝、沉淀试杯试验方法
GB/T 1688-2008
Rubber,vulcanized - Determination
of
tension fatigue
硫化橡胶 伸张疲劳的测定
GB/T 8081-2008
Rubber, raw natural - Guidelines for the specification
of
technically specified rubber(TSR)
天然生胶 技术分级橡胶(TSR)规格导则
GB/T 16613-2008
Plastics - Preparation
of
PVC pastes for test purposes - Dissolver method
塑料 试验用聚氯乙烯（PVC）糊的制备 分散器法
GB/T 7124-2008
Adhesives - Determination
of
tensile lap-shear strength of rigid-to-rigid bonded assemblies
胶粘剂 拉伸剪切强度的测定(刚性材料对刚性材料)
GB/T 1713-2008
Determination
of
density of pigments - Pyknometer method
颜料密度的测定 比重瓶法
GB/T 9870.2-2008
Rubber, vulcanized or thermoplastic - Determination
of
dynamic properties - Part 2:Torsion pendulum methods at low frequencies
硫化橡胶或热塑性橡胶动态性能的测定 第2部分：低频扭摆法
GB/T 9768-2008
Regulation
of
application and maintenance of tyre
轮胎使用与保养规程
GB/T 9751.1-2008
Paints and varnishes - Determination
of
viscosity using rotary viscometers - Part1:Cone-and-plate viscometer operated at a high rate of shear
色漆和清漆 用旋转黏度计测定黏度 第1部分：以高剪切速率操作的锥板黏度计
GB/T 9267-2008
Emulsions for coatings and polymer dispersions for coatings and plastics - Determination
of
white point temperature and minimum film-forming temperature
涂料用乳液和涂料、塑料用聚合物分散体 白点温度和最低成膜温度的测定
GB/T 8296-2008
Raw natural rubber and rubber latices - Determination
of
manganese content - Sodium periodate photmetric methods
天然生胶和胶乳 锰含量的测定 高碘酸钠光度法
GB/T 8291-2008
Natural rubber latex concentrate - Determination
of
coagulum content (sieve residue)
浓缩天然胶乳 凝块含量（筛余物）的测定
GB/T 7531-2008
Determination
of
ignition residue for organic chemical products
有机化工产品灼烧残渣的测定
GB/T 21986-2008
Assessment
of
agroclimate impact: classfication method of annual crop climate types
农业气候影响评价：农作物气候年型划分方法
GB/T 21948.2-2008
Test conditions for CNC milling machines with table
of
variable height - Testing of accuracy - Part 2: Machines with vertical spindle
数控升降台铣床检验条件 精度检验 第2部分：立式铣床
GB/T 16456.3-2008
End mills with brazed helical hardmetal tips - Part 3: Dimensions
of
end mills with morse typer shank
硬质合金螺旋齿立铣刀 第3部分：莫氏锥柄立铣刀 型式和尺寸
GB/T 17111-2008
Cutting tool - Designation
of
high-speed steel groups
切削刀具 高速钢分组代号
Find out:
27688
Items
|
First
-
Previous
-
Next
-
Last
|
[402]
[403]
[404]
[405]
[406]
[407]
[408]
www.rjs.cn
transcustoms.com
gbstandards.org
-
Since 2001
-
+86-755-25831330
[email protected]
© Copyright 2001-2021 All Rights Reserved
GB/T 21994.4-2008
+86-755-25831330
