China National Standards

HOME CONTACT US

to PC vesion

GB Standards

CNS Standards

China HS code & Tariff

'of'
China GB Standards List

GB/T 11213.2-2007
Sodium hydroxide for chemical fiber use - Determination of sodium chloride content - Spectrometric method
化纤用氢氧化钠　氯化钠含量的测定分光光度法

GB/T 21067-2007
Electrical equipment of industrial machines - Electromagnetic compatibility - Immunity of general requirements
工业机械电气设备电磁兼容通用抗扰度要求

GB/T 21066-2007
Electrical installations of ships and mobile and fixed offshore units - Procedures for calculating short-circuit currents in three phase a.c.
船舶和移动式及固定式近海设施的电气装置三相交流短路电流计算方法

GB/T 21065-2007
Electrical installation in ships - Installation and test of completed installation
船舶电气装置安装和完工试验

GB/T 27021-2007
Conformity assessment - Requirements for bodies providing audit and certification of management systems
合格评定管理体系审核认证机构的要求

GB/T 21006-2007
Surface chemical analysis - X-ray photoelectron and Auger electron spectrometers - Linearity of intensity scale
表面化学分析 X射线光电子能谱仪和俄歇电子能谱仪强度标的线性

GB/T 21000.1-2007
Commercial refrigerated cabinets - Methods of test - Part 1: General test conditions and temperature test
商用冷藏柜试验方法第1部分：通用试验条件及温度试验

GB/T 4681-2007
External cylindrical centreless grinding machines - Testing of the accuracy
无心外圆磨床精度检验

GB/T 4682-2007
Internal cylindrical grinding machines with horizontal spindle - Testing of the accuracy
内圆磨床精度检验

GB/T 4685-2007
External cylindrical grinding machines - Testing of the accuracy
外圆磨床精度检验

GB/T 5288-2007
Slideways grinding machines with two columns - Testing of the accuracy
龙门导轨磨床精度检验

GB/T 6476-2007
Surface grinding machines with vertical grinding wheel spindle and reciprocating table - Testing of the accuracy
立轴矩台平面磨床精度检验

GB/T 4022.1-2007
Surface grinding machines with horizontal grinding wheel spindle and reciprocating table - Testing of the accuracy - Part 1：Machines with a table surface length of up to 1600 mm
卧轴矩台平面磨床精度检验第1部分：工作台面长度至1600mm的机床

GB/T 20432.10-2007
Photography - Photographic-grade chemicals - Test methods - Part 10： Determination of sulfide content
摄影照相级化学品试验方法第10部分: 硫化物的测定

GB/T 16462.4-2007
Test conditions for numerically controlled turning machines and turning centres - Part 4: Accuracy and repeatability of positioning of linear and rotary axes
数控车床和车削中心检验条件第4部分：线性和回转轴线的定位精度及重复定位精度检验

GB/T 20432.11-2007
Photography - Photographic-grade chemicals - Test methods - Part 11： Determination of specific gravity
摄影照相级化学品试验方法第11部分：相对密度的测定

GB/T 20432.13-2007
Photography - Photographic-grade chemicals - Test methods - Part 13: Determination of pH
摄影照相级化学品试验方法第13部分：pH值的测定

GB/T 968-2007
Manufacturing tolerances on the threaded of portion taps
丝锥螺纹公差

GB/T 21013-2007
Machine tools - Mounting of plain grinding wheels by means of hub flanges
机床紧固平砂轮用砂轮卡盘

GB/T 20957.4-2007
Test conditions for precision machining centres - Part 4：Accuracy and repeatability of positioning of linear and rotary axes
精密加工中心检验条件第4部分：线性和回转轴线的定位精度和重复定位精度检验

GB/T 2075-2007
Classification and application of hard cutting materials for metal removal with defined cutting edges ― Designation of the main groups and groups of application
切削加工用硬切削材料的分类和用途大组和用途小组的分类代号

GB/T 18400.9-2007
Test conditions for machining centres - Part 9: Evaluation of the operating times of tool change and pallet change
加工中心检验条件第9部分：刀具交换和托板交换操作时间的评定

GB/T 20432.5-2007
Photography Photographic-grade chemicals - Test methods Part 5： Determination of heavy metals and iron content
摄影照相级化学品试验方法第5部分：重金属和铁含量的测定

GB/T 20432.8-2007
Photography - Photographic-grade chemicals - Test methods - Part 8： Determination of volatile matter
摄影照相级化学品试验方法第8部分：挥发性物质的测定

GB/T 20432.2-2007
Photography - Photographic-grade chemicals - Test methods - Part 2: Determination of matter insoluble in water
摄影照相级化学品试验方法第2部分:水不溶物的测定

GB 20997-2007
Limits of fuel consumption for light duty commercial vehicles
轻型商用车辆燃料消耗量限值

GB/T 6300-2007
Regulations for submission of the ship’s finished documents
提交船舶产品完工文件的规定

GB/T 20897.2-2007
Inflatable boats - Part 2: Boats with a maximum motor power rating of 4.5 kW to 15 kW inclusive
充气艇第2部分: 发动机最大额定功率为4.5kW～15kW的艇

GB/T 11144-2007
Standard test method for measurement of extreme-perssure prosperties of lubricating fluids - Timken method
润滑液极压性能测定法梯姆肯法

GB/T 4798.4-2007
Environmental conditions existing in the application of electric and electronic products - Section 4: Stationary use at non-weather-protected locations
电工电子产品应用环境条件第4部分：无气候防护场所固定使用

GB/T 4798.3-2007
Environmental conditions existing in the application of electric and electronic products - Section 3: Stationary use at weather-protected locations
电工电子产品应用环境条件第3部分：有气候防护场所固定使用

GB/T 4798.5-2007
Environmental conditions existing in the application of electric and electronic products - Section 5: Ground vehicle installations
电工电子产品应用环境条件第5部分：地面车辆使用

GB/T 4798.7-2007
Environmental conditions existing in the application of electric and electronic products - Section 7: Portable and non-stationary use
电工电子产品应用环境条件第7部分：携带和非固定使用

GB/T 13182-2007
Thallium-actived sodium iodide scintillator and scintillation detectors of sodium iodide(thallium)
碘化钠（铊）闪烁体和碘化钠（铊）闪烁探测器

GB/T 20982.3-2007
Textile machinery and accessories - Weaving machines - Part 3: Parts of the machine - Vocabulary
纺织机械与附件织机第3部分：织机零部件词汇

GB 9706.6-2007
Medical electrical equipment - Part 2：Particular requirements for the safety of microwave therapy equipment
医用电气设备第二部分：微波治疗设备安全专用要求

GB/T 20485.13-2007
Methods for the calibration of vibration and shock transducers - Part 13: Primary shock calibration by laser interferometry
振动与冲击传感器校准方法第13部分: 激光干涉法冲击绝对校准

GB/T 20485.21-2007
Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a reference transducer
振动与冲击传感器校准方法第21部分：振动比较法校准

GB/T 20968-2007
Non-destructive testing - Aids to visual inspection - Selection of low-power magnifiers
无损检测目视检测辅助工具低倍放大镜的选用

GB/T 16172-2007
Test method for heat release rate of building materials
建筑材料热释放速率试验方法

GB/T 5332-2007
Method of test for ignition temperature of flammable liquids and gases
可燃液体和气体引燃温度试验方法

GB/T 14041.2-2007
Hydraulic fluid power - Filter elements - Verification of material compatibility with fluids
液压滤芯材料与液体相容性检验方法

GB/T 20966-2007
Determination of particle size distribution for colliery powders
煤矿粉尘粒度分布测定方法

GB/T 20969.3-2007
Special environmental condition - Machinery for plateau - Part 3: The specification of select type and acceptance check for construction machinery on plateau
特殊环境条件高原机械第3部分：高原型工程机械选型、验收规范

GB/T 11313.4-2007
Radio-frequency connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16)
射频连接器第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型)

GB/T 18311.16-2007
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules
纤维光学互连器件和无源器件基本试验和测量程序第3-16部分：检查和测量球面抛光套管端面半径

GB/T 18311.20-2007
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices
纤维光学互连器件和无源器件基本试验和测量程序第3-20部分：检查和测量纤维光学分路器件的方向性

GB/T 18311.26-2007
Fibre optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes
纤维光学互连器件和无源器件基本试验和测量程序第3-26部分：检查和测量光纤和插针轴线间的角偏差的测量

GB/T 21024-2007
General specification of Chinese speech synthesis system
中文语音合成系统通用技术规范

GB/T 21026-2007
Specification for Chinese office software application programming interface
中文办公软件应用编程接口规范

Find out:27688Items | First -Previous-Next -Last | [427] [428] [429] [430] [431] [432] [433]


www.rjs.cn	transcustoms.com	gbstandards.org

- Since 2001 -

+86-755-25831330 [email protected]
© Copyright 2001-2021 All Rights Reserved