China National Standards		 HOME  CONTACT US to PC vesion

'Qualification'
China GB Standards List

 GB/T 16608.1-2023  
Basic electromechanical relays for telecommunications with Qualification - Part 1: General specification and blank detail specification
有质量评定的电信用基础机电继电器 第1部分：总规范与空白详细规范
 GB/T 23718.7-2022  
Machine condition monitoring and diagnostics - Requirements for personnel Qualification and assessment - Part 7: Thermal imaging
机器状态监测与诊断 人员资格与人员评估的要求 第7部分：热成像
 GB/T 41979.4-2022  
Friction stir spot welding of aluminum and aluminum alloys - Part 4: Welding procedure specification and Qualification
搅拌摩擦点焊 铝及铝合金 第4部分:焊接工艺规程及评定
 GB/T 40424-2021  
Welding procedure Qualification test for tubes to tube-plate joints
管与管板的焊接工艺评定试验
 GB/T 40079-2021  
Classification system and Qualification procedures for fugitive emission type testing of valves
阀门逸散性试验分类和鉴定程序
 GB/T 41123.3-2021  
Non-destructive testing—Radiation methods for industrial computed tomography—Part 3:Qualification
无损检测 工业射线计算机层析成像检测 第3部分：验证
 GB/T 41113-2021  
Qualification testing of brazers and brazing operators
硬钎焊工和硬钎焊操作工技能评定
 GB/T 40740-2021  
Welding procedures Qualification for overlay welding
堆焊工艺评定试验
 GB/T 40800-2021  
Specification and Qualification of welding procedures for production welding of steel castings
铸钢件焊接工艺评定规范
 GB/T 40801-2021  
Welding procedure Qualification tests for titanium,zirconium and their alloys
钛、锆及其合金的焊接工艺评定试验
 GB/T 39312-2020  
Welding procedure Qualification test for copper and its alloys
铜及铜合金的焊接工艺评定试验
 GB/T 22720.2-2019  
Rotating electrical machines—Qualification tests for the partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters
旋转电机 电压型变频器供电的旋转电机耐局部放电电气绝缘结构（Ⅱ型）的鉴定试验
 GB/T 13062-2018  
Semiconductor devices—Integrated circuits—Part 21-1:Blank detail specification for film integrated circuits and hybrid film integrated circuits on the basis of the Qualification approval procedures
半导体器件-集成电路-第21-1部分：膜集成电路和混合膜集成电路空白详细规范(采用鉴定批准程序)
 GB/T 36234-2018  
Qualification testing of welders for fusion welding ontitanium and titanium alloys，zirconium and zirconium alloys
钛及钛合金、锆及锆合金熔化焊焊工技能评定
 GB/T 13625-2018  
Seismic Qualification of safety class electrical equipment for nuclear power plants
核电厂安全级电气设备抗震鉴定
 GB/T 36697-2018  
Discard Qualification for ladle crane
铸造起重机报废条件
 GB/T 36439-2018  
Non-destructive testing—Certification and Qualification of aerospace NDT personnel
无损检测 航空无损检测人员资格鉴定与认证
 GB/T 36044-2018  
Qualification procedure of electrical equipment important to safety for nuclear power plant
核电厂安全重要电气设备鉴定规程
 GB/T 11498-2018  
Semiconductor devices—Integrated circuits—Part 21：Sectional specification for film integrated circuits and hybrid film integrated circuits on the basis of the Qualification approval procedures
半导体器件-集成电路-第21部分：膜集成电路和混合膜集成电路分规范(采用鉴定批准程序)半导体器件-集成电路-第21部分：膜集成电路和混合膜集成电路分规范(采用鉴定批准程序)
 GB/T 22720.1-2017  
Rotating electrical machines—Qualification and quality control tests of partial discharge free electrical insulation systems (Type I) used in rotating electrical machines fed from voltage converters
旋转电机 电压型变频器供电的旋转电机无局部放电（Ⅰ型）电气绝缘结构的鉴别和质量控制试验
 GB/T 34828-2017  
Acoustics—Test methods for the Qualification of free-field environments
声学 自由场环境评定测试方法
 GB/T 34399-2017  
Temperature control facilities of pharmaceutical products cold chain logistics－Specification for performance Qualification
医药产品冷链物流温控设施设备验证 性能确认技术规范
 GB/T 34630.4-2017  
Friction stir welding—Aluminium and its alloys—Part 4：Specification and Qualification of welding procedures
搅拌摩擦焊 铝及铝合金 第4部分：焊接工艺规程及评定
 GB/T 34630.3-2017  
Friction stir welding—Aluminium and its alloys—Part 3：Qualification of welding operators
搅拌摩擦焊 铝及铝合金 第3部分：焊接操作工的技能评定
 GB/T 33645-2017  
Welding procedure Qualification test for laser-arc hybrid welding of steels, nickel and nickel alloys
钢、镍及镍合金的激光-电弧复合焊接工艺评定试验
 GB/T 12727-2017  
Qualification of safety class electrical equipment for nuclear power plants
核电厂安全级电气设备鉴定
 GB/T 35409-2017  
Specification for auditing Qualification of merchants on E-commerce platform
电子商务平台商家入驻审核规范
 GB/T 33209-2016  
Welding procedure Qualification for welded gas cylinders
焊接气瓶焊接工艺评定
 GB/T 23718.4-2015  
Condition monitoring and diagnostics of machines—Requirements for Qualification and assessment of personnel—Part 4: Field lubricant analysis
机器状态监测与诊断 人员资格与人员评估的要求 第4部分：现场润滑剂分析
 GB/T 9445-2015  
Non-destructive testing—Qualification and certification of NDT personnel
无损检测 人员资格鉴定与认证
 GB/T 32257-2015  
Qualification testing of welders for fusion welding on nickel and nickel alloys
镍及镍合金熔化焊焊工技能评定
 GB/Z 32075-2015  
Non-destructive testing—Discontinuities in specimens for use in Qualification examinations
无损检测 资格鉴定考试用试样中的不连续
 GB/T 32080-2015  
Non-destructive testing—Qualification of personnel for limited application of non-destructive testing
无损检测 有限应用无损检测的人员资格鉴定
 GB/T 20112-2015  
Evaluation and Qualification of electrical insulation systems
电气绝缘系统的评定与鉴别
 GB/T 23718.6-2014  
Condition monitoring and diagnostics of machines―Requirements for Qualification and assessment of personnel―Part 6: Acoustic emission
机器状态监测与诊断 人员资格与人员评估的要求 第6部分：声发射
 GB/T 30563-2014  
Qualification test of welders―Fusion welding for copper and copper alloys
铜及铜合金熔化焊焊工技能评定
 GB/T 30340-2013  
Qualifications for vehicle drivers training organization
机动车驾驶员培训机构资格条件
 GB/Z 22720.2-2013  
Rotating electrical machines―Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters
旋转电机 电压型变频器供电的旋转电机耐局部放电电气绝缘结构（Ⅱ型）的鉴别和认可试验
 GB/T 29165.2-2012  
Petroleum and natural gas industries - Glass-reinforced plastics (GRP) piping - Part 2: Qualification and manufacture
石油天然气工业 玻璃纤维增强塑料管 第2部分：评定与制造
 GB/T 29074-2012  
Requirements for Qualification of space components
宇航元器件鉴定要求
 GB/T 12273.501-2012  
Quartz crystal units A specification in the quality assessment system for electronic components Part 5.1: Blank detail specification- Qualification approval
石英晶体元件 电子元器件质量评定体系规范 第5.1部分：空白详细规范 鉴定批准
 GB/T 28777-2012  
Process valve Qualification procedure for the petrochemical industry
石化工业用阀门的评定
 GB/T 19869.2-2012  
Welding procedure Qualification test for aluminum and its alloys
铝及铝合金的焊接工艺评定试验
 GB/T 12859.2-2012  
Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic components (IECQ) - Part 2: Sectional specification-Qualification approval
电子元器件质量评定体系规范 压电陶瓷谐振器 第2部分：分规范- 鉴定批准
 GB/T 12859.1-2012  
Piezoelectric ceramic resonators - A specification in the IEC quality assessment System for electronic components(IECQ) - Part 1: Generic specification-Qualification approval
电子元器件质量评定体系规范 压电陶瓷谐振器 第1部分：总规范- 鉴定批准
 GB/T 28266-2012  
Non-destructive testing of pressure equipment - Qualification of radiographic film digitization systems
承压设备无损检测 射线胶片数字化系统的鉴定方法
 GB/T 28158-2011  
Occupational classification and Qualification management of international trade
国际贸易业务的职业分类与资质管理
 GB/T 15473-2011  
Qualification of class 1E static battery chargers and inverters for nuclear power plants
核电厂安全级静止式充电装置及逆变装置的质量鉴定
 GB/T 26141.2-2010  
Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements
无损检测 射线照相底片数字化系统的质量鉴定 第2部分：最低要求
 GB/T 26141.1-2010  
Non-destructive testing - Qualification of radiographic film digitisation systems - Part1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
无损检测 射线照相底片数字化系统的质量鉴定 第1部分：定义、像质参数的定量测量、标准参考底片和定性控制

Find out:91Items   |   First -Previous-Next -Last  | 1 2

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        [email protected] 
© Copyright  2001-2021 All Rights Reserved