China National Standards		 HOME  CONTACT US to PC vesion

'loaded'
China GB Standards List

 GB/T 43782-2024  
Preloaded high-strength bolted structural connection pairs-Part 11: Load indicating washers
人工智能-机器学习系统技术要求
 GB/T 42725-2023  
International Trade Business Process Specification Verified Gross Mass of loaded Containers
国际贸易业务流程规范 经核实的载货集装箱总质量
 GB/T 12243-2021  
Spring loaded safety valves
弹簧直接载荷式安全阀
 GB/T 39484-2020  
Fibre-reinforced plastic composites—Determination of the mode Ⅱ fracture resistanc for unidirectionally reinforced materials using the calibrated end-loaded split(C-ELS) test and an effective crack length approach
纤维增强塑料复合材料 用校准端载荷分裂试验（C-ELS）和有效裂纹长度法测定单向增强材料的Ⅱ型断裂韧性
 GB/Z 36517-2018  
Rolling bearings—Methods for calculating the modified reference rating life for universally loaded bearings
滚动轴承 一般载荷条件下轴承修正参考额定寿命计算方法
 GB/T 1149.15-2017  
Internal combustion engines—Piston rings—Part 15: Coil-spring-loaded oil control rings of narrow width made of cast iron
内燃机 活塞环 第15部分：薄型铸铁螺旋撑簧油环
 GB/T 30968.4-2014  
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 4: Test method of open-hole compressive strength
聚合物基复合材料层合板开孔/受载孔性能试验方法 第4部分：开孔压缩强度试验方法
 GB/T 30968.3-2014  
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 3: Test method of open-hole tensile strength strength
聚合物基复合材料层合板开孔/受载孔性能试验方法 第3部分：开孔拉伸强度试验方法
 GB/T 30968.2-2014  
Test method for open-hole/loaded-hole of polymer matrix composite laminates―Part 2: Test method of filled-hole tension and compression
聚合物基复合材料层合板开孔/受载孔性能试验方法 第2部分：充填孔拉伸和压缩试验方法
 GB/T 30968.1-2014  
Test method for open-hole/loaded-hole of polymer matrix composite laminates—Part 1: Test method of bearing response
聚合物基复合材料层合板开孔/受载孔性能试验方法 第1部分：挤压性能试验方法
 GB/T 29509.1-2013  
Methods for chemical analysis of gold-loaded carbon - Part 1: Determination of gold content
载金炭化学分析方法 第1部分：金量的测定
 GB/T 29509.2-2013  
Methods for chemical analysis of gold-loaded carbon - Part 2：Determination of silver content - Flame atomic absorption spectrometry
载金炭化学分析方法 第2部分：银量的测定 火焰原子吸收光谱法
 GB/T 29026-2012  
Spring loaded safety valve for cryogenic service
低温介质用弹簧直接载荷式安全阀
 GB/T 20633.2-2011  
Coatings for loaded printed wire boards (conformal coatings) - Part 2：Methods of test
承载印制电路板用涂料(敷形涂料) 第2部分：试验方法
 GB/T 20633.3-2011  
Coatings for loaded printed wire boards (conformal coatings) - Part 3：Coatings for general purpose (Class 1), high reliability (Class 2) and aerospace(Class 3)
承载印制电路板用涂料(敷形涂料) 第3部分：一般用(1级)、高可靠性用(2级)和航空航天用(3级)涂料
 GB/T 1149.14-2008  
Internal combustion engines - Piston rings - Part 14: Coil-spring-loaded oil control rings
内燃机 活塞环 第14部分：螺旋撑簧油环
 GB/T 20633.1-2006  
Coatings for loaded printed wire boards(conformal coating）- Part 1: Definitions,classification and general requirements
承载印制电路板用涂料（敷形涂料）第1部分：定义、分类和一般要求
 GB/T 19926-2005  
Hydraulic fluid power-Gas-loaded accumulators-Dimensions of gas port
液压传动 充气式蓄能器 气口尺寸
 GB/T 19925-2005  
Hydraulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port
液压传动 隔离式充气蓄能器 优先选择的液压油口
 GB/T 19739-2005  
Mechanical vibration and shock-Hand-arm vibration-Method for measuring the vibration transmissibility of resilient materials when loaded by the hand-arm system
机械振动与冲击 手臂振动 手臂系统为负载时弹性材料振动传递率的测量方法
 GB/T 12243-2005  
Spring loaded safety valves
弹簧直接载荷式安全阀
 GB/T 2352-2003  
Hydraulic fluid power--Gas-loaded accumulators with separator--Ranges of pressures and volumes and characteristic quantities
液压传动 隔离式充气蓄能器压力和容积范围及特征量
 GB/T 15970.4-2000  
Corrosion of metals and alloys--Stress corrosion testing--Part 4:Preparation and use of uniaxially loaded tension specimens
金属和合金的腐蚀 应力腐蚀试验 第4部分:单轴加载拉伸试样的制备和应用
 GB/T 14562-1999  
V-belts--Fatigue test--loaded method
V带疲劳试验方法 有扭矩法

Find out:24Items   |   First -Previous-Next -Last  | 1

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        sales@gbstandards.org 
© Copyright  2001-2021 All Rights Reserved