China National Standards		 HOME  CONTACT US to PC vesion

'studs'
China GB Standards List

 GB/T 3098.6-2023  
Mechanical properties of fasteners Stainless steel bolts, screws and studs
紧固件机械性能 不锈钢螺栓、螺钉和螺柱
 GB/T 41157.1-2022  
Fasteners for nuclear power plants—Part 1：Bolts, screws and studs made of alloy steel
核电厂用紧固件 第1部分：合金钢螺栓、螺钉和螺柱
 GB/T 41157.3-2022  
Fasteners for nuclear power plants—Part 3：Bolts, screws and studs made of corrosion-resistant stainless steel
核电厂用紧固件 第3部分：不锈钢螺栓、螺钉和螺柱
 GB/T 3098.23-2020  
Mechanical properties of fasteners—M42～M72 bolts, screws and studs
紧固件机械性能 M42～M72螺栓、螺钉和螺柱
 GB/T 3098.24-2020  
Mechanical properties of fasteners—Stainless steel and nickel alloys bolts, screws, studs and nuts for high temperature applications
紧固件机械性能 高温用不锈钢和镍合金螺栓、螺钉、螺柱和螺母
 GB/T 39291-2020  
Test method for impact wear properties of studs
鞋钉冲击磨损性能试验方法
 GB/T 35480-2017  
Fastener—Steel bolts, screws and studs with microencapsulated adhesive pre-coating technical specification
紧固件 螺栓、螺钉和螺柱预涂微胶囊型粘合层技术条件
 GB/T 35478-2017  
Fastener—Steel bolts,screws and studs with polyamide locking pre-coating technical specification
紧固件 螺栓、螺钉和螺柱预涂聚酰胺锁紧层技术条件
 GB/T 3106-2016  
Fasteners—Bolts,screws and studs—Nominal lengths and thread lengths
紧固件 螺栓、螺钉和螺柱 公称长度和螺纹长度
 GB/T 5276-2015  
Fasteners—Bolts, screws, studs and nuts—Symbols and descriptions of dimensions
紧固件 螺栓、螺钉、螺柱及螺母 尺寸代号和标注
 GB/T 3098.6-2014  
Mechanical properties of fasteners―Stainless steel Bolts,screws and studs
紧固件机械性能 不锈钢螺栓、螺钉和螺柱
 GB/T 902.4-2010  
Threaded studs with flange （pitch）and stud with internal thread for short-cycle drawn arc stud welding
短周期电弧螺柱焊用焊接螺柱
 GB/T 902.2-2010  
Threaded studs for drawn arc stud welding with ceramic ferrule
电弧螺柱焊用焊接螺柱
 GB/T 3098.1-2010  
Mechanical properties of fasteners - Bolts,screws and studs
紧固件机械性能 螺栓、螺钉和螺柱
 GB/T 10432.3-2010  
Unthreaded studs for capacitor discharge welding
储能焊用无头焊钉
 GB/T 10432.1-2010  
Unthreaded studs for drawn arc stud welding with ceramic ferrule
电弧螺柱焊用无头焊钉
 GB/T 3098.22-2009  
Mechanical properties of fasteners made of the fine grain non-heat treatment steel - Bolts,screws and studs
紧固件机械性能 细晶非调质钢螺栓、螺钉和螺柱
 GB/T 16938-2008  
Fasteners - General requirements for bolts,screws,studs and nuts
紧固件 螺栓、螺钉、螺柱和螺母 通用技术条件
 GB/T 13807.2-2008  
Connections with waisted stud - studs
腰状杆螺柱连接副 螺柱
 GB/T 902.3-2008  
Weld studs for capacitor discharge welding
储能焊用焊接螺柱
 GB/T 902.1-2008  
Weld studs for manual welding
手工焊用焊接螺柱
 GB/T 3103.1-2002  
Tolerances for fasteners--Bolts，screws，studs and nuts
紧固件公差 螺栓、螺钉、螺柱和螺母
 GB/T 10433-2002  
Cheese head studs for arc stud welding
电弧螺柱焊用圆柱头焊钉
 GB/T 5779.3-2000  
Fasteners--Surface discontinuities--Bolts，screws and studs for special requirements
紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求
 GB/T 5779.1-2000  
Fasteners--Surface discontinuities--Bolts，screws and studs for general requirements
紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求
 GB/T 3098.10-1993  
Mechanical properties of fasteners--Bolts，screws，studs and nuts made of non-ferrous metals
紧固件机械性能 有色金属制造的螺栓、螺钉、螺柱和螺母
 GB/T 953-1988  
Double end studs (clamping type)--Product grade C
等长双头螺柱 C级
 GB/T 901-1988  
Double end studs (clamping type)--Product grade B
等长双头螺柱 B级
 GB/T 900-1988  
Double end studs--bm=2d
双头螺柱 bm=2d
 GB/T 899-1988  
Double end studs--bm=1.5d
双头螺柱 bm=1.5d
 GB/T 898-1988  
Double end studs--bm=1.25d
双头螺柱 bm=1.25d
 GB/T 897-1988  
Double end studs--bm=1d
双头螺柱 bm=1d
 GB/T 5276-1985  
Fasteners--Bolts，screws，studs and nuts--Symbols and designations of dimensions
紧固件 螺栓、螺钉、螺柱及螺母尺寸代号和标注
 GB/T 3106-1982  
Bolts，screws and studs--Nominal lengths，and thread lengths for general purpose bolts
螺栓、螺钉和螺柱的公称长度和普通螺栓的螺纹长度

Find out:34Items   |   First -Previous-Next -Last  | 1

                
      www.rjs.cn         transcustoms.com       gbstandards.org

- Since 2001 -

+86-755-25831330        [email protected] 
© Copyright  2001-2021 All Rights Reserved