Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 15022.10-2023 |
Resin-based reactive compounds for electrical insulation Part 10: Polyesterimide resin compounds {译} 电气绝缘用树脂基活性复合物 第10部分：聚酯亚胺树脂复合物 |
China National Standards Resin |
 English PDF |
| GB/T 1630.2-2023 |
Plastics Epoxy Resins Part 2: Specimen preparation and property determination of cross-linked epoxy resins {译} 塑料 环氧树脂 第2部分:试样制备和交联环氧树脂的性能测定 |
China National Standards Resin |
English PDF |
| GB/T 12598-2023 |
Plastics Ion exchange Resin Determination of sphericity rate after grinding and sphericity rate after grinding {译} 塑料 离子交换树脂 渗磨圆球率和磨后圆球率的测定 |
China National Standards Resin |
English PDF |
| GB/T 42917-2023 |
PVC Resin for matt products {译} 消光制品用聚氯乙烯树脂 |
China National Standards Resin |
English PDF |
| GB/T 42790-2023 |
Acrylic copolymer polyvinyl chloride Resin {译} 丙烯酸共聚聚氯乙烯树脂 |
China National Standards Resin |
English PDF |
| GB/T 5758-2023 |
Method for determination of particle size, effective particle size and uniformity coefficient of ion exchange Resin {译} 离子交换树脂粒度、有效粒径和均一系数的测定方法 |
China National Standards Resin |
English PDF |
| GB/T 15022.9-2022 |
Resin-based reactive compounds for electrical insulation - Part 9: Resins for cable accessories {译} 电气绝缘用树脂基活性复合物 第9部分：电缆附件用树脂 |
China National Standards Resin |
English PDF |
| GB/T 1303.12-2022 |
Industrial rigid laminates of thermosetting Resins for electrical purposes - Part 12: Typical values {译} 电气用热固性树脂工业硬质层压板 第12部分：典型值 |
China National Standards Resin |
English PDF |
| GB/T 24138-2022 |
petroleum Resin {译} 石油树脂 |
China National Standards Resin |
English PDF |
| GB/T 41926-2022 |
Plastics - Determination of 1,2-ethylene glycol content in epoxy Resins {译} 塑料 环氧树脂 1,2-乙二醇含量的测定 |
China National Standards Resin |
English PDF |
| GB/T 41928-2022 |
Plastics epoxy Resins - Determination of degree of crosslinking of crosslinked epoxy resins by differential scanning calorimetry (DSC) {译} 塑料 环氧树脂 差示扫描量热法（DSC）测定交联环氧树脂交联度 |
China National Standards Resin |
English PDF |
| GB/T 41929-2022 |
Plastics - epoxy Resins - test methods {译} 塑料 环氧树脂 试验方法 |
China National Standards Resin |
English PDF |
| GB/T 41874-2022 |
Plastic Polyphenylene ether (PPE) Resin {译} 塑料 聚苯醚（PPE）树脂 |
China National Standards Resin |
English PDF |
| GB/T 41873-2022 |
Plastic Polyether ether ketone (PEEK) Resin {译} 塑料 聚醚醚酮（PEEK）树脂 |
China National Standards Resin |
English PDF |
| GB/T 41880-2022 |
Plastics - epoxy Resins - determination of electrical conductivity of aqueous extracts {译} 塑料 环氧树脂 水萃取液电导率的测定 |
China National Standards Resin |
English PDF |
| GB/T 40280-2021 |
Plastics—Resins in the liquid state or as emulsions or dispersions—Determination of apparent viscosity using a single cylinder type rotational viscometer method 塑料 液态或乳液态或分散体系的树脂 用单筒旋转黏度计测定表观黏度 |
China National Standards Resin |
English PDF |
| GB/T 11175-2021 |
Testing methods for synthetic Resin emulsions 合成树脂乳液试验方法 |
China National Standards Resin |
English PDF |
| GB/T 2567-2021 |
Test methods for properties of Resin casting body 树脂浇铸体性能试验方法 |
China National Standards Resin |
English PDF |
| GB/T 15592-2021 |
Polyvinyl chloride paste Resins 聚氯乙烯糊用树脂 |
China National Standards Resin |
English PDF |
| GB/T 20186.2-2021 |
Secondary coating materials used for optical fibre—Part 2: Modified propylene Resin 光纤用二次被覆材料 第2部分：改性聚丙烯 |
China National Standards Resin |
English PDF |
| GB/T 38537-2020 |
Ultrasonic testing method for fiber reinforced Resin matrix composites—C-scan method 纤维增强树脂基复合材料超声检测方法 C扫描法 |
China National Standards Resin |
English PDF |
| GB/T 38535-2020 |
Test method on fiber reinforced Resin matrix composites by industrial computed tomography (CT) 纤维增强树脂基复合材料工业计算机层析成像（CT）检测方法 |
China National Standards Resin |
English PDF |
| GB/T 38515-2020 |
The method for high temperature mechanical properties of quartz fabric-reinforced Resin matrix composite materials 石英纤维织物增强树脂基复合材料高温力学性能试验方法 |
China National Standards Resin |
English PDF |
| GB/T 38286-2019 |
Polyethylene(PE)，polypropylene(PP) and polystyrene(PS) Resin―Determination of peroxide value 聚乙烯、聚丙烯、聚苯乙烯树脂 过氧化值的测定 |
China National Standards Resin |
English PDF |
| GB/T 38286-2019 |
Polyethylene(PE)，polypropylene(PP) and polystyrene(PS) Resin―Determination of peroxide value 聚乙烯、聚丙烯、聚苯乙烯树脂 过氧化值的测定 |
China National Standards Resin |
English PDF |
| GB/T 37195-2018 |
Technical specification for rehabilitation of pipeline corrosion prevention with Resin 以树脂为基料管道耐蚀修复作业技术规范 |
China National Standards Resin |
English PDF |
| GB/T 37197-2018 |
Ethylene-vinyl acetate Resin 乙烯-乙酸乙烯酯(EVAC)树脂 |
China National Standards Resin |
English PDF |
| GB/T 17931-2018 |
Poly(ethylene terephthalate) (PET) Resin for bottles 瓶用聚对苯二甲酸乙二酯（PET）树脂 |
China National Standards Resin |
English PDF |
| GB/T 37198-2018 |
Impact-resistant polystyrene（PS-I）Resin 抗冲击聚苯乙烯（PS-I）树脂 |
China National Standards Resin |
English PDF |
| GB/T 5761-2018 |
Suspension polyvinyl chloride Resins of general purpose 悬浮法通用型聚氯乙烯树脂 |
China National Standards Resin |
English PDF |
| GB 1886.300-2018 |
National Food Safety Standard - Food Additives - Ion Exchange Resins 食品安全国家标准-食品添加剂-离子交换树脂 |
China National Standards Resin |
English PDF |
| GB/T 9756-2018 |
Synthetic Resin emulsion coatings for interior wall 合成树脂乳液内墙涂料 |
China National Standards Resin |
English PDF |
| GB/T 36797-2018 |
Epoxy Resin joint sealant for anti-cracking in refurbishment 装修防开裂用环氧树脂接缝胶 |
China National Standards Resin |
English PDF |
| GB/T 36769-2018 |
Determination of percent regeneration of cation exchange Resins 阳离子交换树脂再生转型率测定方法 |
China National Standards Resin |
English PDF |
| GB/T 35817-2018 |
General technical requirements of modified wood with Resin impregnation for interior application 室内用树脂改性木材通用技术要求 |
China National Standards Resin |
English PDF |
| GB/T 34939.1-2017 |
D.C.±800kV composite post insulator—Part 1: Composite post insulator with Resin impregnated glass fibers solid core ±800kV直流支柱复合绝缘子 第1部分：环氧玻璃纤维实心芯体复合绝缘子 |
China National Standards Resin |
English PDF |
| GB/T 15022.7-2017 |
Resin based reactive compounds used for electrical insulation—Part 7: Epoxy-anhydride vacuum pressure impregnation(VPI) resin 电气绝缘用树脂基活性复合物 第7部分：环氧酸酐真空压力浸渍(VPI)树脂 |
China National Standards Resin |
English PDF |
| GB/T 34983-2017 |
Resin bond diamond wire for photovoltaic applications 光伏用树脂金刚石切割线 |
China National Standards Resin |
English PDF |
| GB/T 34722-2017 |
Surface decorated plywood and blockboard with paper impregnated thermosetting Resins 浸渍胶膜纸饰面胶合板和细木工板 |
China National Standards Resin |
English PDF |
| GB/T 34693-2017 |
Plastic—Chlorinated poly(vinyl chloride)Resins 塑料 氯化聚氯乙烯树脂 |
China National Standards Resin |
English PDF |
| GB/T 34694-2017 |
Plastic—Determination of residual chloride content of chlorinated poly (vinyl chloride)Resins—Potentiometric titration method 塑料 氯化聚氯乙烯树脂中残余氯含量的测定 电位滴定法 |
China National Standards Resin |
English PDF |
| GB/T 1303.5-2017 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins 电气用热固性树脂工业硬质层压板 第5部分：三聚氰胺树脂硬质层压板 |
China National Standards Resin |
English PDF |
| GB/T 15022.8-2017 |
Resin based reactive compounds used for electrical insulation— Part 8：Epoxy modified unsaturated polyester vacuum pressure impregnation (VPI) resin 电气绝缘用树脂基活性复合物 第8部分：环氧改性不饱和聚酯真空压力浸渍(VPI)树脂 |
China National Standards Resin |
English PDF |
| GB/T 34255-2017 |
Poly(butylene succinate-co-butylene adipate) (PBSA) Resin 聚丁二酸-己二酸丁二酯(PBSA)树脂 |
China National Standards Resin |
English PDF |
| GB/T 34030-2017 |
Ships and marine technology—Standard specification for thermosetting Resin fiberglass pipe and fittings to be used for marine applications 船舶和海上技术 船用热固树脂玻璃纤维管及附件技术要求 |
China National Standards Resin |
English PDF |
| GB/T 34006-2017 |
Cardanol modified phenolic Resin for composite material 复合材料用腰果酚改性酚醛树脂 |
China National Standards Resin |
English PDF |
| GB/T 35157-2017 |
Resinous agglomerated stone slab 树脂型合成石板材 |
China National Standards Resin |
English PDF |
| GB/T 15102-2017 |
Surface decorated fiberboard and particleboard with paper impregnated thermosetting Resins 浸渍胶膜纸饰面纤维板和刨花板 |
China National Standards Resin |
English PDF |
| GB/T 15022.2-2017 |
Resin based reactive compounds used for electrical insulation—Part 2: Methods of test 电气绝缘用树脂基活性复合物 第2部分：试验方法 |
China National Standards Resin |
English PDF |
| GB/T 14732-2017 |
Wood adhesives: urea-formaldehyde, phenol-formaldehyde and melamine-formaldehyde Resins 木材工业胶粘剂用脲醛、酚醛、三聚氰胺甲醛树脂 |
China National Standards Resin |
English PDF |
| GB/T 14074-2017 |
Testing methods for wood adhesives and Resins 木材工业用胶粘剂及其树脂检验方法 |
China National Standards Resin |
English PDF |
| GB/T 35499-2017 |
Code for quality and technology of anticorrosive construction with furan Resin 呋喃树脂耐蚀作业质量技术规范 |
China National Standards Resin |
English PDF |
| GB/T 33388-2016 |
Plastics—Determination of phenolic Resin compositions—Liquid chromatography 塑料 酚醛树脂组分的测定 液相色谱法 |
China National Standards Resin |
English PDF |
| GB/T 33379-2016 |
Binders for paints and varnishes—Amino Resins—General methods of test 色漆和清漆用漆基 氨基树脂 通用试验方法 |
China National Standards Resin |
English PDF |
| GB/T 33371.1-2016 |
Binders for paints and varnishes—Alkyd Resins—Part 1: General methods of test 色漆和清漆用漆基 醇酸树脂 第1部分：通用试验方法 |
China National Standards Resin |
English PDF |
| GB/T 33323-2016 |
Plastics—Liquid phenolic Resins—Determinaiton of water miscibility 塑料 液体酚醛树脂 水溶性的测定 |
China National Standards Resin |
English PDF |
| GB/T 33312-2016 |
Binders for paints and varnishes—Polyisocyanate Resins—General methods of test 色漆和清漆用漆基 多异氰酸酯树脂 通用试验方法 |
China National Standards Resin |
English PDF |
| GB/T 33316-2016 |
Plastics—Phenolic Resins—Determination of reactivity on a B-transformation test plate 塑料 酚醛树脂 在乙阶转变试板上反应活性的测定 |
China National Standards Resin |
English PDF |
| GB/T 33315-2016 |
Plastics—Phenolic Resins—Determinaiton of the gel time 塑料 酚醛树脂 凝胶时间的测定 |
China National Standards Resin |
English PDF |
| GB/T 33317-2016 |
Plastics—Phenolic Resins—Determination of hexamethylenetetramine content—Kjeldahl method,perchloric acid method and hydrochloric acid method 塑料 酚醛树脂 六次甲基四胺含量的测定 凯氏定氮法、高氯酸法和盐酸法 |
China National Standards Resin |
English PDF |
| GB 4806.6-2016 |
National Food Safety Standard-Plastic Resin used in Food-contact 食品安全国家标准 食品接触用塑料树脂 |
China National Standards Resin |
English PDF |
| GB/T 33030-2016 |
Indentification of starches adulterant in oleoResin 松脂中淀粉类掺杂物鉴别方法 |
China National Standards Resin |
English PDF |
| GB/T 33028-2016 |
Indentification of industrial salt adulterant in oleoResin 松脂中工业盐掺杂物鉴别方法 |
China National Standards Resin |
English PDF |
| GB/T 33025-2016 |
Evaluation method for adulterated oleoResin 松脂掺杂评估方法 |
China National Standards Resin |
English PDF |
| GB 31604.6-2016 |
National Food Safety Standard-Food contact materials and products-DETERMINATION OF RESIDUES FROM Resin IN RESINS 食品安全国家标准 食品接触材料及制品 树脂中灼烧残渣的测定 |
China National Standards Resin |
English PDF |
| GB 31604.5-2016 |
National Food Safety Standard - Food Contact Materials and Products - Determination of Extract in Resin 食品安全国家标准 食品接触材料及制品 树脂中提取物的测定 |
China National Standards Resin |
English PDF |
| GB 31604.4-2016 |
National Food Safety Standard-Food contact materials and products-DETERMINATION OF VOLATILE IN ResinS 食品安全国家标准 食品接触材料及制品 树脂中挥发物的测定 |
China National Standards Resin |
English PDF |
| GB 31604.3-2016 |
National Food Safety Standard-Food contact materials and products-Determination of Resin loss on drying 食品安全国家标准 食品接触材料及制品 树脂干燥失重的测定 |
China National Standards Resin |
English PDF |
| GB/T 32788.2-2016 |
Test method for properties of prepreg—Part 2: Determination for Resin flow of prepreg 预浸料性能试验方法 第2部分：树脂流动度的测定 |
China National Standards Resin |
English PDF |
| GB/T 32788.5-2016 |
Test method for properties of prepreg—Part 5: Determination of Resin content 预浸料性能试验方法 第5部分：树脂含量的测定 |
China National Standards Resin |
English PDF |
| GB/T 32697-2016 |
Plastics—Phenol-formaldehyde—Determination of electrical conductivity of Resin extracts 塑料 酚醛树脂 萃取液电导率的测定 |
China National Standards Resin |
English PDF |
| GB/T 32679-2016 |
Ultra-high-molecular-weight polyethylene(PE-UHMW) Resin 超高分子量聚乙烯（PE-UHMW）树脂 |
China National Standards Resin |
English PDF |
| GB/T 32681-2016 |
Plastics—Phenolic Resin —Determination of heats and temperatures of reaction by differential scanning calorimetry 塑料 酚醛树脂 用差示扫描量热计法测定反应热和反应温度 |
China National Standards Resin |
English PDF |
| GB/T 32684-2016 |
Plastic—Phenolic Resins—Determination of free formaldehyde content 塑料 酚醛树脂 游离甲醛含量的测定 |
China National Standards Resin |
English PDF |
| GB/T 32675-2016 |
Plastics—Phenloic Resins—Determination of the pseudo-adiabatic temperature rise of liquid resols when cured under acid conditions 塑料 酚醛树脂 液体甲阶酚醛树脂在酸性条件下固化时假绝热温升的测定 |
China National Standards Resin |
English PDF |
| GB/T 32688-2016 |
Plastics—Phenloic Resin powder—Determination of flow distance on a heated glass plate 塑料 酚醛树脂 在加热玻璃板上流动距离的测定 |
China National Standards Resin |
English PDF |
| GB/T 32491-2016 |
Test method for long-Term hydrostatic pressure of glass fiber reinforced thermosetting Resin pipe and fittings 玻璃纤维增强热固性树脂管及管件长期静水压试验方法 |
China National Standards Resin |
English PDF |
| GB/T 32473-2016 |
Ion exchange Resins for condensate polishing treatment 凝结水精处理用离子交换树脂 |
China National Standards Resin |
English PDF |
| GB/T 32472-2016 |
D113 macroporous weak acid acrylic type cation exchange Resins D113大孔弱酸性丙烯酸系阳离子交换树脂 |
China National Standards Resin |
English PDF |
| GB/T 32364-2015 |
Plastics—Phenloic Resins—Determination of pH 塑料 酚醛树脂 pH值的测定 |
China National Standards Resin |
English PDF |
| GB/T 32462-2015 |
Determination of the migration of antimony in polyester Resin and products—Atomic fluorescence spectrophotometer 聚酯树脂及其成型品中锑迁移量的测定 原子荧光光度法 |
China National Standards Resin |
English PDF |
| GB/T 32461-2015 |
Determination of formaldehyde in amino Resins and phenolic resins and the migration of formaldehyde in their molding—High performance liquid chromatography 氨基树脂、酚醛树脂中甲醛含量及其成型品中甲醛迁移量的测定 高效液相色谱法 |
China National Standards Resin |
English PDF |
| GB/T 18001-2015 |
OleoResin from Pinus elliottii Engelm 湿地松松脂 |
China National Standards Resin |
English PDF |
| GB 31572-2015 |
Emission standard of pollutants for synthetic Resin industry 合成树脂工业污染物排放标准 |
China National Standards Resin |
English PDF |
| GB/T 31293-2014 |
Vacuum Resin infusion molding epoxy for wind blade 风电叶片用真空导入环氧树脂 |
China National Standards Resin |
English PDF |
| GB/T 15022.6-2014 |
Resin based reactive compounds used for electrical insulation―Part 6：Epoxy casting resinous compounds use for class 1E distribution transformer in nuclear power generating stations 电气绝缘用树脂基活性复合物 第6部分：核电站1E级配电变压器绝缘用环氧浇注树脂 |
China National Standards Resin |
English PDF |
| GB/T 9755-2014 |
Synthetic Resin emulsion coatings for exterior wall 合成树脂乳液外墙涂料 |
China National Standards Resin |
English PDF |
| GB/T 30794-2014 |
Determination of polyvinylidene fluoride (PVDF) content of hot-melt fluorocarbon Resin coatings (dry film)—Dropping of the melting temperature 热熔型氟树脂涂层（干膜）中聚偏二氟乙烯（PVDF）含量测定 熔融温度下降法 |
China National Standards Resin |
English PDF |
| GB/T 30787-2014 |
Binder Resin applied in digital printing materials―The determination average molecular weight and its distribution―gel permeation chromatography 数字印刷材料用成膜树脂 平均分子量及其分布的测定 凝胶渗透色谱法 |
China National Standards Resin |
English PDF |
| GB/T 30773-2014 |
Determination of residual phenol content in phenolic Resins by gas chromatography 气相色谱法测定 酚醛树脂中游离苯酚含量 |
China National Standards Resin |
English PDF |
| GB/T 30772-2014 |
Phenolic Resin for phenolic moulding compound 酚醛模塑料用酚醛树脂 |
China National Standards Resin |
English PDF |
| GB/T 24148.9-2014 |
Plastics—Unsaturated polyester Resins (UP-R)—Part 9: Determination of overall volume shrinkage 塑料 不饱和聚酯树脂(UP-R） 第9部分：总体积收缩率测定 |
China National Standards Resin |
English PDF |
| GB/T 24148.8-2014 |
Plastics—Unsaturated polyester Resin—Part 8：Determination of color using platinum-cobalt colormetric method 塑料 不饱和聚酯树脂（UP-R） 第8部分：铂-钴比色法测定颜色 |
China National Standards Resin |
English PDF |
| GB/T 24148.7-2014 |
Plastics—Unsaturated polyester Resins—Part 7: Measurement of gel time at ambient temperature 塑料 不饱和聚酯树脂（UP-R） 第7部分: 室温条件下凝胶时间的测定 |
China National Standards Resin |
English PDF |
| GB 30527-2014 |
The norm of energy consumption per unit product of polyvinyl chloride Resin 聚氯乙烯树脂单位产品能源消耗限额 |
China National Standards Resin |
English PDF |
| GB/T 7911-2013 |
High-pressure decorative laminates—Sheets made from thermosetting Resins 热固性树脂浸渍纸高压装饰层积板(HPL) |
China National Standards Resin |
English PDF |
| GB/T 30389-2013 |
Chillies and chilli oleoResins—Determination of total capsaicinoid content—Spectrophotometric methods 辣椒及其油树脂 总辣椒碱含量的测定 分光光度法 |
China National Standards Resin |
English PDF |
| GB/T 30388-2013 |
Chillies and chilli oleoResins―Determination of total capsaicinoid content―Method using HPLC 辣椒及其油树脂 总辣椒碱含量的测定 高效液相色谱法 |
China National Standards Resin |
English PDF |
| GB/T 7351-2013 |
Fiber grade polyvinyl alcohol Resins 纤维级聚乙烯醇树脂 |
China National Standards Resin |
English PDF |
| GB 29947-2013 |
National Food Safety Standard Food Additive Identification Allyl disulfide Food Additive Identification Terpine Resin 食品安全国家标准 食品添加剂 萜烯树脂 |
China National Standards Resin |
English PDF |
| GB/T 29874-2013 |
Plastics - Homopolymer and copolymer Resins of vinyl chloride - Determination of residual vinyl chloride monomer by gas-chromatographic analysis of dry powder 塑料 氯乙烯均聚和共聚树脂 气相色谱法对干粉中残留氯乙烯单体的测定 |
China National Standards Resin |
English PDF |
| GB/T 5476-2013 |
Methods of pretreating ion exchange Resins 离子交换树脂预处理方法 |
China National Standards Resin |
English PDF |
| GB/T 5475-2013 |
Methods for samping ion exchange Resins 离子交换树脂取样方法 |
China National Standards Resin |
English PDF |
| GB/T 2915-2013 |
Determination of conductivity of water extract of polyvinyl chloride Resins 聚氯乙烯树脂 水萃取液电导率的测定 |
China National Standards Resin |
English PDF |
| GB/T 16580-2013 |
D201 macroporous strongly basic styrene type anion exchange Resins D201大孔强碱性苯乙烯系阴离子交换树脂 |
China National Standards Resin |
English PDF |
| GB/T 16579-2013 |
D001 macroporous strongly acidic styrene type cation exchange Resins D001大孔强酸性苯乙烯系阳离子交换树脂 |
China National Standards Resin |
English PDF |
| GB/T 29499-2013 |
Synthetic Resin curtain-wall-imitation coating on architectural 建筑用仿幕墙合成树脂涂层 |
China National Standards Resin |
English PDF |
| GB/T 29290-2012 |
Button general technical requirements and testing methods - Unsaturated polyester Resin buttons 钮扣通用技术要求和检测方法 不饱和聚酯树脂类 |
China National Standards Resin |
English PDF |
| GB/T 28690-2012 |
Resin-bonded sand reclamation equipment - Technical requirements 树脂砂再生成套设备 技术条件 |
China National Standards Resin |
English PDF |
| GB 9686-2012 |
National Food Safety Standard - Epoxy Polyamide Resin Coating for Inner Wall 食品安全国家标准 内壁环氧聚酰胺树脂涂料 |
China National Standards Resin |
English PDF |
| GB 11677-2012 |
National Food Safety Standard - Water-based Modified Epoxy Resin Coating on the Inner Wall of Pop Can 食品安全国家标准 易拉罐内壁水基改性环氧树脂涂料 |
China National Standards Resin |
English PDF |
| GB 28314-2012 |
National Food Safety Standard Food Additive Capsicum OleoResin 食品安全国家标准 食品添加剂 辣椒油树脂 |
China National Standards Resin |
English PDF |
| GB/T 27868-2011 |
Starch-based biodegradable Resin 可生物降解淀粉树脂 |
China National Standards Resin |
English PDF |
| GB/T 27797.7-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分：树脂传递模塑 |
China National Standards Resin |
English PDF |
| GB/T 27811-2011 |
Natural Resin coatings for woodenware for indoor decorating and refurbishing 室内装饰装修用天然树脂木器涂料 |
China National Standards Resin |
English PDF |
| GB/T 27809-2011 |
Bisphenol A epoxy Resins for thermosetting powder coatings 热固性粉末涂料用双酚A型环氧树脂 |
China National Standards Resin |
English PDF |
| GB/T 27808-2011 |
Saturated polyester Resins for thermosetting powder coatings 热固性粉末涂料用饱和聚酯树脂 |
China National Standards Resin |
English PDF |
| GB/T 13657-2011 |
Bisphenol-A epoxy Resin 双酚A型环氧树脂 |
China National Standards Resin |
English PDF |
| GB/T 15022.5-2011 |
Resin based reactive compounds used for electrical insulation - Part 5：Quartz filled epoxy resinous compounds 电气绝缘用树脂基活性复合物 第5部分：石英填料环氧树脂复合物 |
China National Standards Resin |
English PDF |
| GB/T 15022.3-2011 |
Resin based reactive compounds used for electrical insulation - Part 3: Unfilled epoxy resinous compounds 电气绝缘用树脂基活性复合物 第3部分：无填料环氧树脂复合物 |
China National Standards Resin |
English PDF |
| GB/T 27593-2011 |
Textile dyeing and finishing auxiliaries - Determination of free formaldehyde content of amino Resin agent 纺织染整助剂 氨基树脂整理剂中游离甲醛含量的测定 |
China National Standards Resin |
English PDF |
| GB/T 26749-2011 |
Carbon fiber - Determination of tensile properties of Resin-impregnated yarn 碳纤维 浸胶纱拉伸性能的测定 |
China National Standards Resin |
English PDF |
| GB/T 26735-2011 |
Glass fiber reinforced thermosetting Resin spray pipe 玻璃纤维增强热固性树脂喷淋管 |
China National Standards Resin |
English PDF |
| GB/T 25264-2010 |
Solvent-based acrylic Resin coatings 溶剂型丙烯酸树脂涂料 |
China National Standards Resin |
English PDF |
| GB/T 25259-2010 |
Perchlorovinyl Resin coatings 过氯乙烯树脂涂料 |
China National Standards Resin |
English PDF |
| GB/T 25258-2010 |
Perchlorovinyl Resin anticorrosive coatings 过氯乙烯树脂防腐涂料 |
China National Standards Resin |
English PDF |
| GB/T 25253-2010 |
Phenolic Resin coatings 酚醛树脂涂料 |
China National Standards Resin |
English PDF |
| GB/T 25252-2010 |
Phenolic Resin anticorrosive coatings 酚醛树脂防锈涂料 |
China National Standards Resin |
English PDF |
| GB/T 25251-2010 |
Alkyd Resin coatings 醇酸树脂涂料 |
China National Standards Resin |
English PDF |
| GB/T 25249-2010 |
Amino - alkyd Resin coatings 氨基醇酸树脂涂料 |
China National Standards Resin |
English PDF |
| GB/T 3402.2-2010 |
Plastics - Homopolymer and copolymer Resins of vinyl chloride - Part 2: Preparation of test samples and determination of properties 塑料 氯乙烯均聚和共聚树脂 第2部分：试样制备及性能测定 |
China National Standards Resin |
English PDF |
| GB/T 25043-2010 |
Multiaxial warp-knitted reinforcement for Resin-matrix prepreg 连续树脂基预浸料用多轴向经编增强材料 |
China National Standards Resin |
English PDF |
| GB/T 50590-2010 |
Technical code for anticorrosion engineering of vinyl ester Resins 乙烯基酯树脂防腐蚀工程技术规范 |
China National Standards Resin |
English PDF |
| GB/T 50589-2010 |
Technical code of construction for epoxy Resins self-leveling flooring 环氧树脂自流平地面工程技术规范 |
China National Standards Resin |
English PDF |
| GB/T 24507-2009 |
Decorative sheets based on thermosetting Resins laminated parquet 浸渍纸层压板饰面多层实木复合地板 |
China National Standards Resin |
English PDF |
| GB/T 24413-2009 |
Phenolic urethane Resin for foundry 铸造用酚脲烷树脂 |
China National Standards Resin |
English PDF |
| GB/T 24412-2009 |
Phenolic Resins for abrasives 磨料磨具用酚醛树脂 |
China National Standards Resin |
English PDF |
| GB/T 24411-2009 |
Phenolic Resin for friction materials 摩擦材料用酚醛树脂 |
China National Standards Resin |
English PDF |
| GB/T 24396-2009 |
Test method of adsorption Resin for food industrial use 食品工业用吸附树脂产品测定方法 |
China National Standards Resin |
English PDF |
| GB/T 24395-2009 |
Adsorption Resin for food industrial use 食品工业用吸附树脂 |
China National Standards Resin |
English PDF |
| GB/T 12672-2009 |
Acrylonitrile-butadiene-styrene(ABS) Resin 丙烯腈-丁二烯-苯乙烯(ABS)树脂 |
China National Standards Resin |
English PDF |
| GB/T 11115-2009 |
Polyethylene(PE) Resin 聚乙烯（PE）树脂 |
China National Standards Resin |
English PDF |
| GB/T 24148.6-2009 |
Plastics - Unsaturated-polyester Resins - Part 6: Determination of reactivity at 130℃ 塑料 不饱和聚酯树脂 (UP-R) 第6部分：130℃反应活性测定 |
China National Standards Resin |
English PDF |
| GB/T 24148.4-2009 |
Plastics - Unsaturated polyester Resin - Part 4: Determination of viscosity 塑料 不饱和聚酯树脂(UP-R) 第4部分：粘度的测定 |
China National Standards Resin |
English PDF |
| GB/T 24148.2-2009 |
Plastics - Unsaturated-polyester Resins (UP-R) - Part 2: Preparation of test specimens and determination of properties 塑料 不饱和聚酯树脂（UP-R） 第2部分：试样制备和性能测定 |
China National Standards Resin |
English PDF |
| GB/T 24148.1-2009 |
Plastics - Unsaturated-polyester Resins (UP-R) - Part 1: Designation system 塑料 不饱和聚酯树脂（UP-R） 第1部分：命名系统 |
China National Standards Resin |
English PDF |
| GB/T 24147-2009 |
Waterborne ultraviolet curable Resin - Water soluble unsaturated polyester acrylate resin 水性紫外光（UV）固化树脂 水溶性不饱和聚酯丙烯酸酯树脂 |
China National Standards Resin |
English PDF |
| GB/T 24138-2009 |
Petroleum Resin 石油树脂 |
China National Standards Resin |
English PDF |
| GB/T 5132.5-2009 |
Industrial rigid round laminated tubes and rods based on thermosetting Resins for electrical purposes - Part 5: Round laminated moulded rods 电气用热固性树脂工业硬质圆形层压管和棒 第5部分：圆形层压模制棒 |
China National Standards Resin |
English PDF |
| GB/T 5132.2-2009 |
Industrial rigid round laminated tubes and rods based on thermosetting Resins for electrical purposes - Part 2: Methods of test 电气用热固性树脂工业硬质圆形层压管和棒 第2部分：试验方法 |
China National Standards Resin |
English PDF |
| GB/T 5132.1-2009 |
Industrial rigid round laminated tubes and rods based on thermosetting Resins for electrical purposes - Part 1: General requirements 电气用热固性树脂工业硬质圆形层压管和棒 第1部分：一般要求 |
China National Standards Resin |
English PDF |
| GB/T 5019.9-2009 |
Insulating materials based on mica - Part 9: Polyester film mica paper with an epoxy Resin binder for single conductor taping 以云母为基的绝缘材料 第9部分：单根导线包绕用环氧树脂粘合聚酯薄膜云母带 |
China National Standards Resin |
English PDF |
| GB/T 5019.8-2009 |
Specification for insulating materials based on mica - Part 8: Glass-backed mica paper with a B-stage epoxy Resin binder 以云母为基的绝缘材料 第8部分：玻璃布补强B阶环氧树脂粘合云母带 |
China National Standards Resin |
English PDF |
| GB/T 5019.7-2009 |
Insulating materials based on mica - Part 7: Glass-backed and film-backed mica paper with an epoxy Resin binder for vacuum pressure impregnation(VPI) 以云母为基的绝缘材料 第7部分：真空压力浸渍（VPI）用玻璃布及薄膜补强环氧树脂粘合云母带 |
China National Standards Resin |
English PDF |
| GB/T 24124-2009 |
C850 system phenolic Resins cotton cloth laminated sheets C850系列酚醛棉布层压板 |
China National Standards Resin |
English PDF |
| GB/T 15022.4-2009 |
Resin based reactive compounds used for electrical insulation - Part 4: Unsaturated polyester based impregnating resins 电气绝缘用树脂基活性复合物 第4部分：不饱和聚酯为基的浸渍树脂 |
China National Standards Resin |
English PDF |
| GB/T 15022.1-2009 |
Resin based reactive compounds used for electrical insulation - Part 1: Definitions and general requirements 电气绝缘用树脂基活性复合物 第1部分：定义及一般要求 |
China National Standards Resin |
English PDF |
| GB/T 1303.9-2009 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 9: Requirements for rigid laminated sheets based on polyimide resins 电气用热固性树脂工业硬质层压板 第9部分：聚酰亚胺树脂硬质层压板 |
China National Standards Resin |
English PDF |
| GB/T 1303.8-2009 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 8: Requirements for rigid laminated sheets based on silicone resins 电气用热固性树脂工业硬质层压板 第8部分：有机硅树脂硬质层压板 |
China National Standards Resin |
English PDF |
| GB/T 1303.7-2009 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 7: Requirements for rigid laminated sheets based on polyester resins 电气用热固性树脂工业硬质层压板 第7部分：聚酯树脂硬质层压板 |
China National Standards Resin |
English PDF |
| GB/T 1303.6-2009 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 6: Requirements for rigid laminated sheets based on phenolic resins 电气用热固性树脂工业硬质层压板 第6部分：酚醛树脂硬质层压板 |
China National Standards Resin |
English PDF |
| GB/T 1303.4-2009 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 4: Requirements for rigid laminated sheets based on epoxy resins 电气用热固性树脂工业硬质层压板 第4部分：环氧树脂硬质层压板 |
China National Standards Resin |
English PDF |
| GB/T 1303.1-2009 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 1: Definitions, designations and general requirements 电气用热固性树脂工业硬质层压板 第1部分：定义、分类和一般要求 |
China National Standards Resin |
English PDF |
| GB/T 1303.11-2009 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 11: Requirements for rigid laminated sheets based on polyamide-imide resins 电气用热固性树脂工业硬质层压板 第11部分：聚酰胺酰亚胺树脂硬质层压板 |
China National Standards Resin |
English PDF |
| GB/T 1303.10-2009 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 10: Requirements for rigid laminated sheets based on bis-maleimide resins 电气用热固性树脂工业硬质层压板 第10部分：双马来酰亚胺树脂硬质层压板 |
China National Standards Resin |
English PDF |
| GB/T 9756-2009 |
Synthetic Resin emulsion coatings for interior wall 合成树脂乳液内墙涂料 |
China National Standards Resin |
English PDF |
| GB/T 18446-2009 |
Binders for paints and varnishes - Determination of monomeric diisocyanates in isocyanate Resins 色漆和清漆用漆基 异氰酸酯树脂中二异氰酸酯单体的测定 |
China National Standards Resin |
English PDF |
| GB/T 23653-2009 |
Plastics - PVC Resins for general use - Determination of hot plasticizer absorption 塑料 通用型聚氯乙烯树脂 热增塑剂吸收量的测定 |
China National Standards Resin |
English PDF |
| GB/T 23652-2009 |
Plastics - PVC Resins - Determination of compacted apparent bulk density 塑料 氯乙烯均聚和共聚树脂 振实表观密度的测定 |
China National Standards Resin |
English PDF |
| GB/T 23472-2009 |
Surface decorated strawboard with paper impregnated thermosetting Resin 浸渍胶膜纸饰面秸秆板 |
China National Standards Resin |
English PDF |
| GB/T 14208.4-2009 |
Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced Resin - Part 4: Determination of apparent interlaminar shear strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第4部分：表观层间剪切强度的测定 |
China National Standards Resin |
English PDF |
| GB/T 14208.3-2009 |
Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced Resin - Part 3: Determination of compressive strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分：压缩强度的测定 |
China National Standards Resin |
English PDF |
| GB/T 14208.2-2009 |
Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving- reinforced Resin - Part 2: Determination of flexural strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第2部分：弯曲强度的测定 |
China National Standards Resin |
English PDF |
| GB/T 14208.1-2009 |
Textile-glass-reinforced plastics - Determination of mechanical properties on rods made of roving-reinforced Resin - Part 1: General considerations and preparation of rods 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第1部分：通则和棒的制备 |
China National Standards Resin |
English PDF |
| GB/T 23100-2008 |
Industrial rigid round winded tubes based on thermosetting Resins for electrical purposes 电气用热固性树脂工业硬质玻璃纤维缠绕管 |
China National Standards Resin |
English PDF |
| GB/T 1303.3-2008 |
Industrial rigid laminated sheets based on thermosetting Resins for electrical purposes - Part 3: Requirements for types of industrial rigid laminated sheets 电气用热固性树脂工业硬质层压板 第3部分：工业硬质层压板型号 |
China National Standards Resin |
English PDF |
| GB/T 22471.2-2008 |
Resin impregnated glass banding tape for electrical insulation - Part 2: Test methods 电气绝缘用树脂浸渍玻璃纤维网状无纬绑扎带 第2部分：试验方法 |
China National Standards Resin |
English PDF |
| GB/T 22293-2008 |
Ginger and its oleoResins - Determination of the main pungent components （gingerols and shogaols）- Method using high-performance liquid chromatography 姜及其油树脂 主要刺激成分测定 HPLC法 |
China National Standards Resin |
English PDF |
| GB/T 4618.2-2008 |
Plastics - Epoxy Resins - Determination of chlorine content - Part 2: Easily saponifiabLe chlorine 塑料 环氧树脂氯含量的测定 第2部分：易皂化氯 |
China National Standards Resin |
English PDF |
| GB/T 4618.1-2008 |
Plastics - Epoxy Resins - Determination of chlorine content - Part 1: Inorganic chlorine 塑料 环氧树脂氯含量的测定 第1部分：无机氯 |
China National Standards Resin |
English PDF |
| GB/T 4616-2008 |
Plastics - Phenolic moulding materials - Determination of acetone-soluble matter（apparent Resin content of material in the unmoulded state） 塑料 酚醛模塑料 丙酮可溶物（未模塑态材料的表观树脂含量）测定 |
China National Standards Resin |
English PDF |
| GB/T 2895-2008 |
Plastics polyester Resin - Determination of partial acid value and total acid value 塑料 聚酯树脂 部分酸值和总酸值的测定 |
China National Standards Resin |
English PDF |
| GB/T 2547-2008 |
Plastic Resins - Sampling 塑料 取样方法 |
China National Standards Resin |
English PDF |
| GB/T 22314-2008 |
Plastics - Epoxide Resins - Determination of viscosity 塑料 环氧树脂 黏度测定方法 |
China National Standards Resin |
English PDF |
| GB/T 1630.1-2008 |
Plastics - Epoxy Resins - Part 1: Designation 塑料 环氧树脂 第1部分：命名 |
China National Standards Resin |
English PDF |
| GB/T 15223-2008 |
Plastics - Liquid Resins - Determination of density by the pyknometer method 塑料 液体树脂 用比重瓶法测定密度 |
China National Standards Resin |
English PDF |
| GB/T 12671-2008 |
Polystyrene (PS) Resin 聚苯乙烯(PS)树脂 |
China National Standards Resin |
English PDF |
| GB/T 11992-2008 |
Determination of exchange capacity of strong basic anion exchange Resins in chloride form 氯型强碱性阴离子交换树脂交换容量测定方法 |
China National Standards Resin |
English PDF |
| GB/T 20186.2-2008 |
Secondary coating materials used for optical fiber - Part 2：Modified propylene Resin 光纤用二次被覆材料 第2部分：改性聚丙烯 |
China National Standards Resin |
English PDF |
| GB/T 7672.5-2008 |
Glass-fiber wound winding wires - Part 5: Glass-fiber wound Resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 200 玻璃丝包绕组线 第5部分：200级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards Resin |
English PDF |
| GB/T 7672.4-2008 |
Glass-fiber wound winding wires - Part 4: Glass-fiber wound Resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 180 玻璃丝包绕组线 第4部分：180级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards Resin |
English PDF |
| GB/T 7672.3-2008 |
Glass-fiber wound winding wires - Part 3: Glass-fiber wound Resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 155 玻璃丝包绕组线 第3部分：155级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards Resin |
English PDF |
| GB/T 7672.24-2008 |
Glass-fiber wound winding wires - Part 24: Glass-fiber wound Resin or varnish impregnated, bare or enamelled round copper wire, temperature index 200 玻璃丝包绕组线 第24部分：200级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
China National Standards Resin |
English PDF |
| GB/T 7672.23-2008 |
Glass-fiber wound winding wires - Part 23: Glass-fiber wound Resin or varnish impregnated, bare or enamelled round copper wire, temperature index 180 玻璃丝包绕组线 第23部分：180级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
China National Standards Resin |
English PDF |
| GB/T 7672.22-2008 |
Glass-fiber wound winding wires - Part 22: Glass-fiber wound Resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 玻璃丝包绕组线 第22部分：155级浸漆玻璃丝包铜圆线和玻璃丝包漆包铜圆线 |
China National Standards Resin |
English PDF |
| GB/T 7672.2-2008 |
Glass-fiber wound winding wires - Part 2: Glass-fiber wound Resin or varnish impregnated, bare or enamelled rectangular copper wire, temperature index 130 玻璃丝包绕组线 第2部分：130级浸漆玻璃丝包铜扁线和玻璃丝包漆包铜扁线 |
China National Standards Resin |
English PDF |
| GB/T 7193-2008 |
Test methods for unsaturated polyester Resins 不饱和聚酯树脂试验方法 |
China National Standards Resin |
English PDF |
| GB/T 2567-2008 |
Test methods for properties of Resin casting boby 树脂浇铸体性能试验方法 |
China National Standards Resin |
English PDF |
| GB/T 15928-2008 |
Reinforced plastics based on unsaturated polyester Resins - Determination of residual styrene monomer content 不饱和聚酯树脂基增强塑料中残留苯乙烯单体含量的测定 |
China National Standards Resin |
English PDF |
| GB/T 14354-2008 |
Food containers of glass fiber reinforced unsaturated polyester Resin 玻璃纤维增强不饱和聚酯树脂食品容器 |
China National Standards Resin |
English PDF |
| Find out:287Items | To Page of: First -Previous-Next -Last | 1 2 |
+86-755-25831330
