Cart:
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 32072-2015 |
Belt drives—Electrical conductivity of antistatic synchronous belts—characteristics and test method 带传动 抗静电同步带的导电性 要求和试验方法 |
China National Standards characteristic |
 English PDF |
| GB/T 31999-2015 |
Technical specification of evaluation of integration characteristics for connecting photovoltaic power system to distribution network 光伏发电系统接入配电网特性评价技术规范 |
China National Standards characteristic |
English PDF |
| GB/T 11313.8-2015 |
Radio-frequency connectors—Part 8: Sectional specification for RF coaxial connectors with inner diameter of outer conductor 6.5 mm (0.256 in) with bayonet lock—characteristic impedance 50Ω（75Ω）(type BNC) 射频连接器 第8部分：外导体内径为6.5mm(0.256in)、特性阻抗为50Ω（75Ω）、卡口连接的射频同轴连接器（BNC型）分规范 |
China National Standards characteristic |
English PDF |
| GB/T 11313.16-2015 |
Radio-frequency connectors—Part 16：Sectional specification for RF coaxial connectors with inner diameter of outer conductor 7 mm (0.276 in) with screw coupling—characteristics impedance 50 Ω (75 Ω) (type N) 射频连接器 第16部分：外导体内径为7mm（0.276in）、特性阻抗为50Ω（75Ω）、螺纹连接的射频同轴连接器（N型）分规范 |
China National Standards characteristic |
English PDF |
| GB/T 19125-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric characteristics of front and rear position lamps,stop lamps 三轮汽车和低速货车 前位灯、后位灯和制动灯配光性能 |
China National Standards characteristic |
English PDF |
| GB/T 19123-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric characteristics of turn signal lamps 三轮汽车和低速货车 转向信号灯配光性能 |
China National Standards characteristic |
English PDF |
| GB/T 19135-2015 |
Tri-wheel vehicles and low-speed goods vehicles—Photometric characteristics of reversing lamps 三轮汽车和低速货车 倒车灯配光性能 |
China National Standards characteristic |
English PDF |
| GB/T 31430-2015 |
Names and colorimetric characteristics of traditional colors in China 中国传统色色名及色度特性 |
China National Standards characteristic |
English PDF |
| GB/T 17618-2015 |
Information technology equipment—Immunity characteristics—Limits and methods of measurement 信息技术设备 抗扰度 限值和测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 30697-2014 |
Test methods of characteristics for spaceborne multispectral camera with wide field of view 星载大视场多光谱相机性能测试方法 |
China National Standards characteristic |
English PDF |
| GB/T 30661.2-2014 |
Wheelchair seating―Part 2: Determination of physical and mechanical characteristics of devices intended to manage tissue integrity―Seat cushions 轮椅车座椅 第2部分：维持组织完整性装置的物理和机械特性测定 座垫 |
China National Standards characteristic |
English PDF |
| GB/T 9869-2014 |
Rubber―Measurement of vulcanization characteristics with the oscillating disc curemeter 橡胶胶料 硫化特性的测定 圆盘振荡硫化仪法 |
China National Standards characteristic |
English PDF |
| GB/T 31020-2014 |
Mobile characteristic of mobile laboratories 移动实验室移动特性 |
China National Standards characteristic |
English PDF |
| GB/T 21421.2-2014 |
Composite string insulator units for overhead lines with a nominal voltage greater than 1 000 V― Part 2：Dimensions and characteristics 标称电压高于1 000V 的架空线路用复合绝缘子串元件 第2部分：尺寸与特性 |
China National Standards characteristic |
English PDF |
| GB/T 30823-2014 |
Nickel-alloy probe test method for determination cooling characteristics of industrial quenching oil 测定工业淬火油冷却性能的镍合金探头试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 30706-2014 |
Measurment method and evaluating of the antibacterial characteristics of photocatalysis materials under visible light irridation 可见光照射下光催化抗菌材料及制品抗菌性能测试方法及评价 |
China National Standards characteristic |
English PDF |
| GB/T 30511-2014 |
Photometric characteristics ofcornering lamps for motor vehicle 汽车用角灯配光性能 |
China National Standards characteristic |
English PDF |
| GB 4824-2013 |
Industrial, scientific and medical equipment—Radio-frequency disturbance characteristics-Limits and methods of measurement 工业、科学和医疗(ISM)射频设备 骚扰特性 限值和测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 30203-2013 |
characteristics of aircraft electrical system 飞机电气系统特性 |
China National Standards characteristic |
English PDF |
| GB/T 20320-2013 |
Measurement and assessment of power quality characteristics of wind turbines generator systems 风力发电机组 电能质量测量和评估方法 |
China National Standards characteristic |
English PDF |
| GB/T 18989-2013 |
Radionuclide imaging device—characteristics and test conditions—Gamma cameras 放射性核素成像设备 性能和试验规则 伽玛照相机 |
China National Standards characteristic |
English PDF |
| GB/T 18988.3-2013 |
Radionuclide imaging device―characteristics and test conditions―Part 3：Gamma camera based-wholebody imaging systems 放射性核素成像设备 性能和试验规则 第3部分：伽玛照相机全身成像系统 |
China National Standards characteristic |
English PDF |
| GB/T 18988.2-2013 |
Radionuclide imaging device―characteristics and test conditions―Part 2：Single photon emission computed tomograph 放射性核素成像设备 性能和试验规则 第2部分：单光子发射计算机断层装置 |
China National Standards characteristic |
English PDF |
| GB/T 18988.1-2013 |
Radionuclide imaging device—characteristics and test conditions—Part 1：Positron emission tomograph 放射性核素成像设备 性能和试验规则 第1部分：正电子发射断层成像装置 |
China National Standards characteristic |
English PDF |
| GB/T 30048-2013 |
Test method for characteristic of pressure filtration of slime 煤泥压滤性试验方法 |
China National Standards characteristic |
English PDF |
| GB 18409-2013 |
Photometric characteristics of parking lamps for power-driven vehicles 汽车驻车灯配光性能 |
China National Standards characteristic |
English PDF |
| GB 18099-2013 |
Photometric characteristics of side-marker lamps for motor vehicles and their trailers 机动车及挂车侧标志灯配光性能 |
China National Standards characteristic |
English PDF |
| GB/T 15168-2013 |
Vibration and shock isolators measuring method for its static and dynamic characteristics 振动与冲击隔离器静、动态性能测试方法 |
China National Standards characteristic |
English PDF |
| GB/T 13288.4-2013 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 4: Method for the calibration of ISO surface profile comparator and for the determination of surface p 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第4部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 触针法 |
China National Standards characteristic |
English PDF |
| GB/T 8107-2012 |
Hydraulic fluid power-Valves - Determination of pressure differential/flow characteristics 液压阀 压差-流量特性的测定 |
China National Standards characteristic |
English PDF |
| GB/T 17469-2012 |
characteristics evaluation of brake linings for automobile - Small sample bench test method 汽车制动器衬片摩擦性能评价 小样台架试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 6791-2012 |
Road vehicles - Spark-plugs and their cylinder head housing - Basic characteristics and dimensions 道路车辆 火花塞及其气缸盖安装孔 基本特征及尺寸 |
China National Standards characteristic |
English PDF |
| GB/T 28950.2-2012 |
Road vehicles and internal combustion engines - Filter vocabulary - Part 2: Definitions of characteristics of filters and their components 道路车辆和内燃机 滤清器名词术语 第2部分：滤清器及其部件性能指标定义 |
China National Standards characteristic |
English PDF |
| GB 13837-2012 |
Sound and television broadcast receivers and associated equipment - Radio disturbance characteristics - Limits and methods of measurement 声音和电视广播接收机及有关设备 无线电骚扰特性 限值和测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 29266-2012 |
Radio frequency identification - 13.56MHz Tag basic electrical characteristics 射频识别 13.56MHz标签基本电特性 |
China National Standards characteristic |
English PDF |
| GB/T 28987-2012 |
Standard methods for development of characteristic mechanical values for structural lumber 结构用规格材特征值的测试方法 |
China National Standards characteristic |
English PDF |
| GB/T 14617.3-2012 |
Propagation characteristics in land mobile service and fixed service - Part 3: Propagation characteristics of line-of-sight radio-relay communications systems 陆地移动业务和固定业务传播特性 第3部分：视距微波接力通信系统传播特性 |
China National Standards characteristic |
English PDF |
| GB/T 14617.2-2012 |
Propagation characteristics in land mobile service and fixed service - Part 2: Propagation characteristics for the terrestrial fixed service in 100 MHz～1 000 MHz 陆地移动业务和固定业务传播特性 第2部分：100 MHz～1 000 MHz固定业务传播特性 |
China National Standards characteristic |
English PDF |
| GB/T 14617.1-2012 |
Propagation characteristics in land mobile service and fixed service - Part 1: Propagation characteristics in land mobile service 陆地移动业务和固定业务传播特性 第1部分：陆地移动业务传播特性 |
China National Standards characteristic |
English PDF |
| GB/T 11441.1-2012 |
Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 1：Mechanical and electrical characteristics 通信和电子设备用变压器和电感器铁心片 第1部分：机械和电性能 |
China National Standards characteristic |
English PDF |
| GB/T 28764-2012 |
Test method for sealing characteristics of packaging containers - Ultrasonic method 包装容器密闭性检测方法 超声波法 |
China National Standards characteristic |
English PDF |
| GB/T 14123-2012 |
Mechanical shock - Testing machines - characteristics and performance 机械冲击 试验机 性能特性 |
China National Standards characteristic |
English PDF |
| GB/T 5295-2012 |
The spectral response characteristic series of photocathodes 光阴极光谱响应特性系列 |
China National Standards characteristic |
English PDF |
| GB/T 28880-2012 |
Non-destructive testing - Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments 无损检测 不用电子测量仪器对脉冲反射式超声检测系统性能特性的评定 |
China National Standards characteristic |
English PDF |
| GB/T 28866-2012 |
characteristic parameters of stand-alone photovoltaic(PV) systems 独立光伏（PV）系统的特性参数 |
China National Standards characteristic |
English PDF |
| GB/T 5800.2-2012 |
Rolling bearings -Instrument precision bearings - Part 2: Boundary dimensions，tolerances and characteristics of inch series bearings 滚动轴承 仪器用精密轴承 第2部分：英制系列轴承的外形尺寸、公差和特性 |
China National Standards characteristic |
English PDF |
| GB/T 5800.1-2012 |
Rolling bearings - Instrument precision bearings - Part 1: Boundary dimensions，tolerances and characteristics of metric series bearings 滚动轴承 仪器用精密轴承 第1部分：公制系列轴承的外形尺寸、公差和特性 |
China National Standards characteristic |
English PDF |
| GB/Z 28623-2012 |
Health informatics - Interoperability and compatibility in messaging and communication standards - Key characteristics 健康信息学 消息传输与通信标准中的互操作性与兼容性 关键特性 |
China National Standards characteristic |
English PDF |
| GB/T 7052-2012 |
Colour carbon black - Determination of flow characteristic 色素炭黑 流动度的测定 |
China National Standards characteristic |
English PDF |
| GB/T 9771.7-2012 |
Single-mode optical fibres for telecommunication - Part 7: characteristics of a bending loss insensitive single-mode optical fibre for the access network 通信用单模光纤 第7部分：接入网用弯曲损耗不敏感单模光纤特性 |
China National Standards characteristic |
English PDF |
| GB/T 28504.1-2012 |
Rare earth doped optical fibre - Part 1: characteristics of double-cladding ytterbium-doped optical fibre 掺稀土光纤 第1部分：双包层掺镱光纤特性 |
China National Standards characteristic |
English PDF |
| GB/T 28281-2012 |
Plain bearings - Quality characteristics - Statistical process control (SPC) 滑动轴承 质量特性 统计过程控制(SPC) |
China National Standards characteristic |
English PDF |
| GB/T 28280-2012 |
Plain bearings - Quality characteristics - Calculation of machine and process capabilities 滑动轴承 质量特性 机器能力及过程能力的计算 |
China National Standards characteristic |
English PDF |
| GB/T 28279.2-2012 |
Plain bearings - Hydrostatic plain journal bearings with drainage grooves under steady-state conditions - Part 2: characteristic values for calculation of oil-lubricated plain journal bearings with drainage grooves 滑动轴承 稳态条件下带回油槽流体静压径向滑动轴承 第2部分：带回油槽油润滑径向滑动轴承计算的特性值 |
China National Standards characteristic |
English PDF |
| GB/T 28278.2-2012 |
Plain bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: characteristic values for calculation of oil-lubricated plain journal bearings without drainage grooves 滑动轴承 稳态条件下不带回油槽流体静压径向滑动轴承 第2部分：不带回油槽油润滑径向滑动轴承计算的特性值 |
China National Standards characteristic |
English PDF |
| GB/T 27939-2011 |
Plain bearings - Quality control techniques and inspection of geometrical and material quality characteristics 滑动轴承 几何和材料质量特性的质量控制技术和检验 |
China National Standards characteristic |
English PDF |
| GB/T 13288.2-2011 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分：磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法 |
China National Standards characteristic |
English PDF |
| GB/T 28177.1-2011 |
Identification cards - Thin flexible cards - Part 1: Physical characteristics 识别卡 柔性薄卡 第1部分：物理特性 |
China National Standards characteristic |
English PDF |
| GB/T 27894.2-2011 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 2: Measuring-system characteristics and statistics for processing of data 天然气 在一定不确定度下用气相色谱法测定组成 第2部分：测量系统的特性和数理统计 |
China National Standards characteristic |
English PDF |
| GB/T 5203-2011 |
Safety logic assemblies of nuclear reactor characteristics and test methods 核反应堆安全逻辑装置特性和检验方法 |
China National Standards characteristic |
English PDF |
| GB/T 27669-2011 |
Non-destructive testing - Ultrasonic inspection - Evaluating electronic characteristics of ultrasonic test instruments 无损检测 超声检测 超声检测仪电性能评定 |
China National Standards characteristic |
English PDF |
| GB/T 2018-2011 |
Methods of measuring the characteristics of recording and reproducing equipment for sound on magnetic tape 磁带录音机测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 27904-2011 |
Testing method for fire characteristics of furniture and subassemblies exposed to flaming ignition source 火焰引燃家具和组件的燃烧性能试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 25753.3-2011 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 3: Measurement of overflow valve differential pressure 真空技术 罗茨真空泵性能测量方法 第3部分：溢流阀压差的测量 |
China National Standards characteristic |
English PDF |
| GB/T 4959-2011 |
Methods of measurement for the characteristics of sound reinforcement in auditoria 厅堂扩声特性测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 12060.5-2011 |
Sound system equipment - Part 5: Methods of measurement for main characteristics of loudspeakers 声系统设备 第5部分：扬声器主要性能测试方法 |
China National Standards characteristic |
English PDF |
| GB/T 26984-2011 |
Test method for distillation characteristics of crude oil 原油馏程的测定 |
China National Standards characteristic |
English PDF |
| GB 14023-2011 |
Vehicles, boats and internal combustion engine - Radio disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车外接收机的限值和测量方法 |
China National Standards characteristic |
English PDF |
| GB/Z 26854-2011 |
Standardising the characteristics of electricity 电特性的标准化 |
China National Standards characteristic |
English PDF |
| GB/T 26874-2011 |
characteristics of ceramic insulator units of the long rod type for high-voltage overhead lines 高压架空线路用长棒形瓷绝缘子元件特性 |
China National Standards characteristic |
English PDF |
| GB/T 15489.6-2010 |
Test methods of colour filter glass - Part 6: Fluorescence characteristic 滤光玻璃测试方法 第6部分：荧光特性 |
China National Standards characteristic |
English PDF |
| GB/T 14212-2010 |
Motorcycle chains - characteristics and test methods 摩托车链条 技术条件和试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 24817.2-2010 |
Lifting appliances - Controls layout and characteristics - Part 2: Mobile cranes 起重机械 控制装置布置形式和特性 第2部分：流动式起重机 |
China National Standards characteristic |
English PDF |
| GB/T 25758.5-2010 |
Non-destructive testing - characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes 无损检测 工业X射线系统焦点特性 第5部分：小焦点和微焦点X射线管的有效焦点尺寸的测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 25758.4-2010 |
Non-destructive testing - characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method 无损检测 工业X射线系统焦点特性 第4部分：边缘方法 |
China National Standards characteristic |
English PDF |
| GB/T 25758.3-2010 |
Non-destructive testing - characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method 无损检测 工业X射线系统焦点特性 第3部分：狭缝照相机射线照相方法 |
China National Standards characteristic |
English PDF |
| GB/T 25758.2-2010 |
Non-destructive testing - characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method 无损检测 工业X射线系统焦点特性 第2部分：针孔照相机射线照相方法 |
China National Standards characteristic |
English PDF |
| GB/T 25758.1-2010 |
Non-destructive testing - characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method 无损检测 工业X射线系统焦点特性 第1部分：扫描方法 |
China National Standards characteristic |
English PDF |
| GB/T 25757-2010 |
Non-destructive testing - Test methods of performance characteristics of automatic magnetic flux leakage testing systems for steel tubes 无损检测 钢管自动漏磁检测系统综合性能测试方法 |
China National Standards characteristic |
English PDF |
| GB/T 25755-2010 |
Vacuum technology - Sputter-ion pumps - Measurement of performance characteristics 真空技术 溅射离子泵 性能参数的测量 |
China National Standards characteristic |
English PDF |
| GB/T 25753.2-2010 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 2: Measurement of compression ratio of the zero throughput 真空技术 罗茨真空泵性能测量方法 第2部分：零流量压缩比的测量 |
China National Standards characteristic |
English PDF |
| GB/T 25753.1-2010 |
Vacuum technology - Roots vacuum pump - Measurement of performance characteristics - Part 1: Measurement of maximum tolerable differential pressure 真空技术 罗茨真空泵性能测量方法 第1部分：最大允许压差的测量 |
China National Standards characteristic |
English PDF |
| GB/T 5313-2010 |
Steel plates with through-thickness characteristics 厚度方向性能钢板 |
China National Standards characteristic |
English PDF |
| GB/T 18655-2010 |
Vehicles, boats and internal combustion engines - Radio disturbance characteristics - Limits and methods of measurement for the protection of on-board receivers 车辆、船和内燃机 无线电骚扰特性 用于保护车载接收机的限值和测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 3769-2010 |
Electroacoustics - Scales and sizes for plotting frequency characteristics and polar diagrams 电声学 绘制频率特性图和极坐标图的标度和尺寸 |
China National Standards characteristic |
English PDF |
| GB/T 25495-2010 |
Test methods for metal releasing characteristics of getters 吸气剂金属释放特性测试方法 |
China National Standards characteristic |
English PDF |
| GB/T 25353-2010 |
Test method to determine the flammability and flame propagation characteristics of thermal/acoustic insulation materials 隔热隔音材料燃烧及火焰蔓延特性试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 25102.100-2010 |
Electroacoustics - Hearing aids - Part 0：Measurement of electroacoustical characteristics 电声学 助听器 第0部分：电声特性的测量 |
China National Standards characteristic |
English PDF |
| GB/T 25122.1-2010 |
Railway applications - Power convertors installed on board rolling stock - Part 1: characteristics and test methods 轨道交通 机车车辆用电力变流器 第1部分：特性和试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 24261.2-2010 |
Marine seismic digital streamer system - Part 2: Standards for specifying hydrophone streamer-cable characteristic 石油海上数字地震采集拖缆系统 第2部分：水听器拖缆技术条件 |
China National Standards characteristic |
English PDF |
| GB/T 24817.5-2009 |
Lifting appliances - Controls - Layout and characteristics - Part 5: Bridge and gantry cranes 起重机械 控制装置布置形式和特性 第5部分：桥式和门式起重机 |
China National Standards characteristic |
English PDF |
| GB/T 24817.4-2009 |
Cranes - Controls - Layout and characteristics - Part 4: Jib cranes 起重机械 控制装置布置形式和特性 第4部分：臂架起重机 |
China National Standards characteristic |
English PDF |
| GB/T 24817.3-2009 |
Cranes - Controls - Layout and characteristics - Part 3: Tower cranes 起重机械 控制装置布置形式和特性 第3部分：塔式起重机 |
China National Standards characteristic |
English PDF |
| GB/T 24817.1-2009 |
Lifting appliances - Controls - Layout and characteristics - Part 1: General principles 起重机械 控制装置布置形式和特性 第1部分：总则 |
China National Standards characteristic |
English PDF |
| GB/T 18777-2009 |
Geometrical product specifications (GPS) - Surface texture - Profile method - Metrological characteristics of phase correct filters 产品几何技术规范（GPS） 表面结构 轮廓法 相位修正滤波器的计量特性 |
China National Standards characteristic |
English PDF |
| GB/T 24611-2009 |
Rolling bearings - Damage and failures - Terms，characteristics and causes 滚动轴承 损伤和失效 术语、特征及原因 |
China National Standards characteristic |
English PDF |
| GB/T 16762-2009 |
Wire rope slings for general purposes-characteristics and technical requirements 一般用途钢丝绳吊索特性和技术条件 |
China National Standards characteristic |
English PDF |
| GB/T 15972.55-2009 |
Specifications for optical fibre test methods - Part 55: Measurement methods and test procedures for environmental characteristics-hydrogen aging 光纤试验方法规范 第55部分：环境性能的测量方法和试验程序-氢老化 |
China National Standards characteristic |
English PDF |
| GB/T 7670-2009 |
Electrodynamic vibration generating systems(equipment) - Performance characteristics 电动振动发生系统（设备） 性能特性 |
China National Standards characteristic |
English PDF |
| GB/T 3685-2009 |
Conveyor belts - Laboratory scale flammability characteristics -Requirements and test method 输送带 实验室规模的燃烧特性 要求和试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 13437-2009 |
Description of torsional vibration absorber characteristics 扭转振动减振器特性描述 |
China National Standards characteristic |
English PDF |
| GB/T 10179-2009 |
Servo-hydraulic test equipment for generating vibration - Method of describing characteristics 液压伺服振动试验设备 特性的描述方法 |
China National Standards characteristic |
English PDF |
| GB/T 22838.9-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 9: Cigarettes loose end 卷烟和滤棒物理性能的测定 第9部分：卷烟空头 |
China National Standards characteristic |
English PDF |
| GB/T 22838.8-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 8: Moisture 卷烟和滤棒物理性能的测定 第8部分：含水率 |
China National Standards characteristic |
English PDF |
| GB/T 22838.7-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 7: Cigarettes dust content 卷烟和滤棒物理性能的测定 第7部分：卷烟含末率 |
China National Standards characteristic |
English PDF |
| GB/T 22838.6-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 6: Hardness 卷烟和滤棒物理性能的测定 第6部分：硬度 |
China National Standards characteristic |
English PDF |
| GB/T 22838.5-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 5: Cigarettes draw resistance and filter rods pressure drop 卷烟和滤棒物理性能的测定 第5部分：卷烟吸阻和滤棒压降 |
China National Standards characteristic |
English PDF |
| GB/T 22838.4-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 4: Cigarettes weight 卷烟和滤棒物理性能的测定 第4部分：卷烟质量 |
China National Standards characteristic |
English PDF |
| GB/T 22838.3-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 3: Circumference - Laser method 卷烟和滤棒物理性能的测定 第3部分：圆周 激光法 |
China National Standards characteristic |
English PDF |
| GB/T 22838.2-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 2: Length - Photoelectricity method 卷烟和滤棒物理性能的测定 第2部分：长度 光电法 |
China National Standards characteristic |
English PDF |
| GB/T 22838.16-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 16: Cigarettes - Determination of loss of tobacco from the ends - Method using a rotating cylindrical cage 卷烟和滤棒物理性能的测定 第16部分：卷烟 端部掉落烟丝的测定 旋转笼法 |
China National Standards characteristic |
English PDF |
| GB/T 22838.15-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 15: Cigarettes - Determination of ventilation - Definitions and measurement principles 卷烟和滤棒物理性能的测定 第15部分：卷烟 通风的测定 定义和测量原理 |
China National Standards characteristic |
English PDF |
| GB/T 22838.14-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 14: Filter rods appearance 卷烟和滤棒物理性能的测定 第14部分：滤棒外观 |
China National Standards characteristic |
English PDF |
| GB/T 22838.13-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 13: Filter rods roundness 卷烟和滤棒物理性能的测定 第13部分：滤棒圆度 |
China National Standards characteristic |
English PDF |
| GB/T 22838.12-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 12: Cigarettes appearance 卷烟和滤棒物理性能的测定 第12部分：卷烟外观 |
China National Standards characteristic |
English PDF |
| GB/T 22838.1-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 1: Cigarettes packing and mark 卷烟和滤棒物理性能的测定 第1部分：卷烟包装和标识 |
China National Standards characteristic |
English PDF |
| GB/T 22838.11-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 11: Cigarettes extinguish 卷烟和滤棒物理性能的测定 第11部分：卷烟熄火 |
China National Standards characteristic |
English PDF |
| GB/T 22838.10-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 10: Open seam 卷烟和滤棒物理性能的测定 第10部分：爆口 |
China National Standards characteristic |
English PDF |
| GB/T 18441-2009 |
Harbour crane - Technical characteristics and acceptance documents 港口起重机 供需文件 |
China National Standards characteristic |
English PDF |
| GB/T 6062-2009 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristic of contact(stylus) instruments 产品几何技术规范（GPS） 表面结构 轮廓法 接触(触针)式仪器的标称特性 |
China National Standards characteristic |
English PDF |
| GB/T 23253-2009 |
Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics 液压传动 电控液压泵 性能试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 13288.5-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 5: Replica tape method for the determination of the surface profile 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第5部分：表面粗糙度的测定方法 复制带法 |
China National Standards characteristic |
English PDF |
| GB/T 13288.3-2009 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned steel substrates - Part 3: Method for the calibration of ISO surface profile comparators and for the determination of su 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第3部分：ISO表面粗糙度比较样块的校准和表面粗糙度的测定方法 显微镜调焦法 |
China National Standards characteristic |
English PDF |
| GB 23255-2009 |
Photometric characteristics of daytime running lamps for motor vehicles 汽车昼间行驶灯配光性能 |
China National Standards characteristic |
English PDF |
| GB 5920-2008 |
Photometric characteristics of front and rear position lamps, end-outline marker lamps and stop lamps for motor vehicles and their trailers 汽车及挂车前位灯、后位灯、示廓灯和制动灯配光性能 |
China National Standards characteristic |
English PDF |
| GB 17509-2008 |
Photometric characteristics of direction indicators for motor vehicles and their trailers 汽车及挂车转向信号灯配光性能 |
China National Standards characteristic |
English PDF |
| GB 11554-2008 |
Photometric characteristics of rear fog lamp for power-driven vehicles and their trailers 机动车和挂车用后雾灯配光性能 |
China National Standards characteristic |
English PDF |
| GB/T 22673-2008 |
Natural graphite brush for rotating electrical machinery-Basic characteristics 旋转电机用天然石墨电刷的基本特性 |
China National Standards characteristic |
English PDF |
| GB/T 3903.27-2008 |
Footwear - Test methods for stiffeners and toepuffs - Mechanical characteristics 鞋类 主跟和包头试验方法 机械性能 |
China National Standards characteristic |
English PDF |
| GB/T 22906.5-2008 |
Testing of cores - Part 5: Determination of characteristics of concentric rotation 纸芯的测定 第5部分：同轴旋转特性的测定 |
China National Standards characteristic |
English PDF |
| GB/T 22789.1-2008 |
Plastics - Unplasticized poly(vinyl chloride)sheets - Types, dimensions and characteristics - Part 1: Sheets of thickness not less than 1 mm 硬质聚氯乙烯板材 分类、尺寸和性能 第1部分：厚度1mm以上板材 |
China National Standards characteristic |
English PDF |
| GB 17510-2008 |
Photometric characteristics of light-signalling devices for motorcycles 摩托车光信号装置配光性能 |
China National Standards characteristic |
English PDF |
| GB/T 22417-2008 |
Fork-lift trucks - Fork-arm extensions and telescopic fork arms - Technical characteristics and strength requirements 叉车 货叉叉套和伸缩式货叉 技术性能和强度要求 |
China National Standards characteristic |
English PDF |
| GB/T 4339-2008 |
Test methods for thermal expansion characteristic parameters of metallic materials 金属材料热膨胀特征参数的测定 |
China National Standards characteristic |
English PDF |
| GB/T 9771.2-2008 |
Single-mode optical fibres for telecommunication - Part 2: characteristics of a cut-off wavelength shifted single-mode optical fibre 通信用单模光纤 第2部分：截止波长位移单模光纤特性 |
China National Standards characteristic |
English PDF |
| GB/T 9771.1-2008 |
Single-mode optical fibres for telecommunication - Part 1: characteristics of a dispersion unshifted single-mode optical fibre 通信用单模光纤 第1部分：非色散位移单模光纤特性 |
China National Standards characteristic |
English PDF |
| GB/T 9771.6-2008 |
Single-mode optical fibres for telecommunication - Part 6: characteristics of a fibre with non-zero dispersion for wideband optical transport 通信用单模光纤 第6部分：宽波长段光传输用非零色散单模光纤特性 |
China National Standards characteristic |
English PDF |
| GB/T 9771.5-2008 |
Single-mode optical fibres for telecommunication - Part 5: characteristics of a non-zero dispersion shifted single-mode optical fibre 通信用单模光纤 第5部分：非零色散位移单模光纤特性 |
China National Standards characteristic |
English PDF |
| GB/T 9771.4-2008 |
Single-mode optical fibres for telecommunication - Part 4: characteristics of a dispersion-shifted single-mode optical fibre 通信用单模光纤 第4部分：色散位移单模光纤特性 |
China National Standards characteristic |
English PDF |
| GB/T 9771.3-2008 |
Single-mode optical fibres for telecommunication - Part 3: characteristics of an extended wavelength band dispersion unshifted single-mode optical fibre 通信用单模光纤 第3部分：波长段扩展的非色散位移单模光纤特性 |
China National Standards characteristic |
English PDF |
| GB/T 16712-2008 |
characteristics of synchronous digital hierarchy (SDH) equipment functional blocks 同步数字体系（SDH）设备功能块特性 |
China National Standards characteristic |
English PDF |
| GB/T 7605-2008 |
Detemination of clemulsibility characteristics of turbine oils in service 运行中汽轮机油破乳化度测定法 |
China National Standards characteristic |
English PDF |
| GB 9254-2008 |
Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement 信息技术设备的无线电骚扰限值和测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 22351.1-2008 |
Identification cards - Contactless integrated circuit(s) cards - Vicinity cards - Part 1: Physical characteristics 识别卡 无触点的集成电路卡 邻近式卡 第1部分：物理特性 |
China National Standards characteristic |
English PDF |
| GB/T 13304.2-2008 |
Steels classification - Part 2: Classification of according to main quality classes and main property or application characteristics 钢分类 第2部分：按主要质量等级和主要性能或使用特性的分类 |
China National Standards characteristic |
English PDF |
| GB/T 2408-2008 |
Plastics - Determination of burning characteristics - Horizontal and vertical test 塑料 燃烧性能的测定 水平法和垂直法 |
China National Standards characteristic |
English PDF |
| GB/T 2407-2008 |
Plastics - Determination of flammability characteristics of rigid plastics in the form of small specimens in contact with an incandescent rod 塑料 硬质塑料小试样与炽热棒接触时燃烧特性的测定 |
China National Standards characteristic |
English PDF |
| GB/T 1844.1-2008 |
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics 塑料 符号和缩略语 第1部分: 基础聚合物及其特征性能 |
China National Standards characteristic |
English PDF |
| GB/T 18654.7-2008 |
Inspection of germplasm for cultured fishes - Part 7: Analysis of ecological characteristics 养殖鱼类种质检验 第7部分：生态特性分析 |
China National Standards characteristic |
English PDF |
| GB/T 6378.1-2008 |
Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by acceptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL 计量抽样检验程序 第1部分：按接收质量限（AQL）检索的对单一质量特性和单个AQL的逐批检验的一次抽样方案 |
China National Standards characteristic |
English PDF |
| GB/T 14055.1-2008 |
Reference neutron radiations - Part 1: characteristics and methods of production 中子参考辐射 第1部分：辐射特性和产生方法 |
China National Standards characteristic |
English PDF |
| GB/T 11807-2008 |
Acoustic monitoring systems for loose parts detection - characteristics, design and operational procedures 探查松脱零件的声学监测系统的特性、设计和运行程序 |
China National Standards characteristic |
English PDF |
| GB/T 8054-2008 |
Single sampling procedures and tables for Inspection having desired operating characteristics by variables 计量标准型一次抽样检验程序及表 |
China National Standards characteristic |
English PDF |
| GB/T 17294.1-2008 |
Micrographics - Alphanumeric computer output microforms - Quality control - Part 1: characteristics of the test slide and test data 缩微摄影技术 字母数字计算机输出缩微品 质量控制 第1部分: 测试幻灯片和测试数据的特征 |
China National Standards characteristic |
English PDF |
| GB/T 13262-2008 |
Single sampling procedures and tables for inspection having desired operating characteristics by attributes for percent nonconforming 不合格品百分数的计数标准型一次抽样检验程序及抽样表 |
China National Standards characteristic |
English PDF |
| GB/T 22149-2008 |
Overhead projectors - Methods for measuring performance characteristics 透射式投影器 性能特性测定方法 |
China National Standards characteristic |
English PDF |
| GB/T 8287.2-2008 |
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 2: Dimensions and characteristics 标称电压高于1000V系统用户内和户外支柱绝缘子 第2部分：尺寸与特性 |
China National Standards characteristic |
English PDF |
| GB/T 11030-2008 |
characteristics of rod ceramic insulators for a.c. contact system of electrified railways 交流电气化铁路接触网用棒形瓷绝缘子特性 |
China National Standards characteristic |
English PDF |
| GB/T 22054-2008 |
Chemicals general method for determination of distillation characteristics of organic liquids(other than petroleum products) 有机液体（除石油产品）蒸馏特性测定通用方法 |
China National Standards characteristic |
English PDF |
| GB/T 14480.3-2008 |
Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification 无损检测 涡流检测设备 第3部分: 系统性能和检验 |
China National Standards characteristic |
English PDF |
| GB/T 18910.41-2008 |
Liquid crystal display devices Part 4-1: Matrix colour LCD modules- Essential ratings and characteristics 液晶显示器件 第4-1部分：彩色矩阵液晶显示模块 基本额定值和特性 |
China National Standards characteristic |
English PDF |
| GB/T 22108.2-2008 |
Pneumatic fluid power - Compressed air filters - Part 2: Test methods to determine the main characteristics to be included in supplier’s literature 气动压缩空气过滤器 第2部分: 评定商务文件中包含的主要特性的测试方法 |
China National Standards characteristic |
English PDF |
| GB/T 22108.1-2008 |
Pneumatic fluid power - Compressed air filters - Part 1: Main characteristics to be included in supplier’s literature and product-marking requirements 气动压缩空气过滤器 第1部分: 商务文件中包含的主要特性和产品标识要求 |
China National Standards characteristic |
English PDF |
| GB/T 4861-2008 |
Analogue counting ratemeters - characteristics and test methods 模拟计数率表 特性和测试方法 |
China National Standards characteristic |
English PDF |
| GB/T 16895.1-2008 |
Low-voltage electrical installations - Part 1: Fundamental principles, assessment of general characteristics,definitions 低压电气装置 第1部分: 基本原则、一般特性评估和定义 |
China National Standards characteristic |
English PDF |
| GB/T 9383-2008 |
Sound and television broadcast receivers and associated equipment-immunity characteristics - Limits and methods of measurement 声音和电视广播接收机及有关设备抗扰度 限值和测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 21954.2-2008 |
Metal cutting band saw blades - Part 2：characteristics and dimensions 金属切割带锯条 第2部分：特性和尺寸 |
China National Standards characteristic |
English PDF |
| GB/T 1233-2008 |
Rubber,unvulcanized - Determinations of pre-vulcanization characteristic using a shearing disc viscometer 未硫化橡胶初期硫化特性的测定 用圆盘剪切粘度计进行测定 |
China National Standards characteristic |
English PDF |
| GB/T 21868.6-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 6: Dispersion using a triple-roll mill 颜料和体质颜料 评定分散性用的分散方法 第6部分:用三辊磨分散 |
China National Standards characteristic |
English PDF |
| GB/T 21868.5-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller 颜料和体质颜料 评定分散性用的分散方法 第5部分:用自动平磨机分散 |
China National Standards characteristic |
English PDF |
| GB/T 21868.4-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 4:Dispersion using a bead mill 颜料和体质颜料 评定分散性用的分散方法 第4部分:用砂磨分散 |
China National Standards characteristic |
English PDF |
| GB/T 21868.3-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 3: Dispersion using a high-speed impeller mill 颜料和体质颜料 评定分散性用的分散方法 第3部分:用高速搅拌机分散 |
China National Standards characteristic |
English PDF |
| GB/T 21868.2-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 2:Dispersion using an oscillatory shaking machine 颜料和体质颜料 评定分散性用的分散方法 第2部分:用振荡磨分散 |
China National Standards characteristic |
English PDF |
| GB/T 21868.1-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 1:Introduction 颜料和体质颜料 评定分散性用的分散方法 第1部分:总则 |
China National Standards characteristic |
English PDF |
| GB/T 21867.3-2008 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 3:Assessment from the change in gloss 颜料和体质颜料 分散性的评定方法 第3部分:由光泽的变化进行评定 |
China National Standards characteristic |
English PDF |
| GB/T 21867.2-2008 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 2:Assessment from the change in fineness of grind 颜料和体质颜料 分散性的评定方法 第2部分:由研磨细度的变化进行评定 |
China National Standards characteristic |
English PDF |
| GB/T 21867.1-2008 |
Pigments and extenders - Methods of assessment of dispersion characteristics - Part 1:Assessment from the change in tinting strength of coloured pigments 颜料和体质颜料 分散性的评定方法 第1部分:由着色颜料的着色力变化进行评定 |
China National Standards characteristic |
English PDF |
| GB/T 5182-2008 |
Fork-lift trucks - Fork arms - Technical characteristics and testing 叉车 货叉 技术要求和试验方法 |
China National Standards characteristic |
English PDF |
| GB/T 15043-2008 |
Method of measuring electrical and photometric characteristics for incandescent lamps 白炽灯泡光电参数的测量方法 |
China National Standards characteristic |
English PDF |
| GB/T 13434-2008 |
Methods of measuring characteristics for discharge lamps (excluding fluorescent lamps) 放电灯（荧光灯除外）特性测量方法 |
China National Standards characteristic |
English PDF |
| GB/Z 21713-2008 |
Recommended practice on characteristic of surges in low-voltage (1000 V and Less) AC Power circuits 低压交流电源（不高于1000 V）中的浪涌特性 |
China National Standards characteristic |
English PDF |
| GB/T 15972.50-2008 |
Specifications for optical fibre test methods - Part 50: Measurement methods and test procedures for environmental characteristics - Damp heat(steady state) 光纤试验方法规范 第50部分：环境性能的测量方法和试验程序 恒定湿热 |
China National Standards characteristic |
English PDF |
| GB/T 15972.40-2008 |
Specifications for optical fibre test methods - Part 40: Measurement methods and test procedures for transmission and optical characteristics - Attenuation 光纤试验方法规范 第40部分：传输特性和光学特性的测量方法和试验程序 衰减 |
China National Standards characteristic |
English PDF |
| GB/T 15972.30-2008 |
Specifications for optical fibre test methods - Part 30: Measurement methods and test procedures for mechanical characteristics - Fibre proof test 光纤试验方法规范 第30部分：机械性能的测量方法和试验程序 光纤筛选试验 |
China National Standards characteristic |
English PDF |
| GB/T 22838.17-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 17: Cigarettes - Determination of loss of tobacco from the ends - Method using a vibro-bench 卷烟和滤棒物理性能的测定 第17部分：卷烟 端部掉落烟丝的测定 振动法 |
China National Standards characteristic |
English PDF |
| GB/T 9871-2008 |
Rubber，vulcanized or thermoplastic-Determination of aging characteristics by measurement of stress relaxation 硫化橡胶或热塑性橡胶老化性能的测定 拉伸应力松弛试验 |
China National Standards characteristic |
English PDF |
| GB/T 13288.1-2008 |
Preparation of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义 |
China National Standards characteristic |
English PDF |
| GB/T 15972.54-2008 |
Specifications for optical fibre test methods - Part 54: Measurement methods and test procedures for environmental characteristics - Gamma irradiation 光纤试验方法规范 第54部分：环境性能的测量方法和试验程序 伽玛辐照 |
China National Standards characteristic |
English PDF |
| GB/T 15972.53-2008 |
Specifications for optical fibre test methods - Part 53: Measurement methods and test procedures for environmental characteristics - Water immersion 光纤试验方法规范 第53部分：环境性能的测量方法和试验程序 浸水 |
China National Standards characteristic |
English PDF |
| GB/T 15972.52-2008 |
Specifications for optical fibre test methods - Part 52: Measurement methods and test procedures for environmental characteristics - Change of temperature 光纤试验方法规范 第52部分：环境性能的测量方法和试验程序 温度循环 |
China National Standards characteristic |
English PDF |
| GB/T 15972.51-2008 |
Specifications for optical fibre test methods - Part 51: Measurement methods and test procedures for environmental characteristics - Dry heat 光纤试验方法规范 第51部分: 环境性能的测量方法和试验程序 干热 |
China National Standards characteristic |
English PDF |
| GB/T 15972.49-2008 |
Specifications for optical fibre test methods - Part 49: Measurement methods and test procedures for transmission and optical characteristics - Differential mode delay 光纤试验方法规范 第49部分：传输特性和光学特性的测量方法和试验程序-微分模时延 |
China National Standards characteristic |
English PDF |
| GB/T 15972.47-2008 |
Specifications for optical fibre test methods - Part 47: Measurement methods and test procedures for transmission and optical characteristics - Macrobending loss 光纤试验方法规范 第47部分：传输特性和光学特性的测量方法和试验程序 宏弯损耗 |
China National Standards characteristic |
English PDF |
| GB/T 15972.46-2008 |
Specifications for optical fibre test methods - Part 46: Measurement methods and test procedures for transmission and optical characteristics - Monitoring of changes in optical transmittance 光纤试验方法规范 第46部分：传输特性和光学特性的测量方法和试验程序 透光率变化 |
China National Standards characteristic |
English PDF |
| GB/T 15972.45-2008 |
Specifications for optical fibre test methods - Part 45: Measurement methods and test procedures for transmission and optical characteristics - Mode field diameter 光纤试验方法规范 第45部分：传输特性和光学特性的测量方法和试验程序 模场直径 |
China National Standards characteristic |
English PDF |
| GB/T 15972.44-2008 |
Specifications for optical fibre test methods - Part 44: Measurement methods and test procedures for transmission and optical characteristics - Cut-off wavelength 光纤试验方法规范 第44部分：传输特性和光学特性的测量方法和试验程序 截止波长 |
China National Standards characteristic |
English PDF |
| GB/T 15972.43-2008 |
Specifications for optical fibre test methods - Part 43: Measurement methods and test procedures for transmission and optical characteristics - Numerrical aperture 光纤试验方法规范 第43部分：传输特性和光学特性的测量方法和试验程序 数值孔径 |
China National Standards characteristic |
English PDF |
| GB/T 15972.42-2008 |
Specifications for optical fibre test methods - Part 42: Measurement methods and test procedures for transmission and optical characteristics - Chromatic dispersion 光纤试验方法规范 第42部分：传输特性和光学特性的测量方法和试验程序 波长色散 |
China National Standards characteristic |
English PDF |
| GB/T 15972.41-2008 |
Specifications for optical fibre test methods - Part 41: Measurement methods and test procedures for transmission and optical characteristics - Bandwidth 光纤试验方法规范 第41部分：传输特性和光学特性的测量方法和试验程序 带宽 |
China National Standards characteristic |
English PDF |
| GB/T 15972.34-2008 |
Specifications for optical fibre test methods - Part 34: Measurement methods and test procedures for mechanical characteristics - Fibre curl 光纤试验方法规范 第34部分：机械性能的测量方法和试验程序 光纤翘曲 |
China National Standards characteristic |
English PDF |
| Find out:500Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
