GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 23646-2009 |
FuEL cell power system for electric bicycles - Technical specification 电动自行车用燃料电池发电系统 技术条件 |
China National Standards EL |
English PDF |
GB/T 23645-2009 |
Test methods of fuEL cell power system for passenger cars 乘用车用燃料电池发电系统测试方法 |
China National Standards EL |
English PDF |
GB/T 23644-2009 |
General specifications for ELectrical special equipment 电工专用设备通用技术条件 |
China National Standards EL |
English PDF |
GB/T 23642-2009 |
ELectrical insulating materials and systems - Electrical measurement of partial discharges (PD) under short rise time and repetitive voltage impulses 电气绝缘材料和系统 瞬时上升和重复冲击电压条件下的局部放电(PD)电气测量 |
China National Standards EL |
English PDF |
GB/T 23641-2009 |
Fiber reinforced unsaturated polyester moulding-compounds(SMC and BMC)for ELectrical purposes 电气用纤维增强不饱和聚酯模塑料(SMC/BMC) |
China National Standards EL |
English PDF |
GB/T 23639-2009 |
Energy conservation and corrosion-resistant steEL-madecable support system 节能耐腐蚀钢制电缆桥架 |
China National Standards EL |
English PDF |
GB/T 20936.3-2009 |
ELectrical apparatus for the detection and measurement of flammable gases - Part 3: Performance requirements for group I apparatus indicating a volume fraction up to 100 % methane in air 可燃性气体探测用电气设备 第3部分:显示空气中甲烷体积含量至100%的I类探测器的性能要求 |
China National Standards EL |
English PDF |
GB/T 20042.5-2009 |
Proton exchange membrane fuEL cell - Part 5: Test method for membrane electrode assembly 质子交换膜燃料电池 第5部分:膜电极测试方法 |
China National Standards EL |
English PDF |
GB/T 20042.4-2009 |
Proton exchange membrane fuEL cell - Part 4: Test method for electrocatalysts 质子交换膜燃料电池 第4部分:电催化剂测试方法 |
China National Standards EL |
English PDF |
GB/T 20042.3-2009 |
Proton exchange membrane fuEL cell - Part 3: Test method for proton exchange membrane 质子交换膜燃料电池 第3部分:质子交换膜测试方法 |
China National Standards EL |
English PDF |
GB/T 23690-2009 |
Procedure for the declaration of materials in products of the ELectrotechnical and electronic industry 电子电气产品材料声明程序 |
China National Standards EL |
English PDF |
GB/T 23686-2009 |
Environmentally conscious design guide for ELectrical and electronic products 电子电气产品的环境意识设计导则 |
China National Standards EL |
English PDF |
GB/T 23685-2009 |
General technical specifications of recovering for waste ELectrical and electronic equipment 废电器电子产品回收利用通用技术要求 |
China National Standards EL |
English PDF |
GB/T 23682-2009 |
Refrigerating systems and heat pumps - Flexible pipe ELements, vibration isolators and expansion joints - Requirements, design and installation 制冷系统和热泵 软管件、隔震管和膨胀接头 要求、设计与安装 |
China National Standards EL |
English PDF |
GB/T 23648-2009 |
GuidELine of earthquake emergency response and rescue for community volunteer 社区志愿者地震应急与救援工作指南 |
China National Standards EL |
English PDF |
GB/T 23647-2009 |
General specification for sELf-service terminal 自助服务终端通用规范 |
China National Standards EL |
English PDF |
GB/T 6609.30-2009 |
Chemical analysis methods and determination of physical performance of alumina - Part 30: X-ray fluorescence spectrometric method for the determination centent of trace ELements 氧化铝化学分析方法和物理性能测定方法 第30部分:X射线荧光光谱法测定微量元素含量 |
China National Standards EL |
English PDF |
GB/T 6609.27-2009 |
Chemical analysis methods and determination of physical performance of alumina - Part 27: Partical size analysis - Method using ELectriformed sieves 氧化铝化学分析方法和物理性能测定方法 第27部分:粒度分析 筛分法 |
China National Standards EL |
English PDF |
GB/T 23614.2-2009 |
Chemical analysis methods for titanium nickEL shape memory alloy - Part 2: Determination of cobalt, copper, chromium, iron, niobium content - Inductively coupled plasma atomic emission spectrometry 钛镍形状记忆合金化学分析方法 第2部分:钴、铜、铬、铁、铌量的测定 电感耦合等离子体发射光谱法 |
China National Standards EL |
English PDF |
GB/T 23614.1-2009 |
Methods for chemical analysis of titanium nickEL shape memory alloy - Part 1: Determination of nickel content - Dimethylglyoxime precipitate separatioin-EDTA complex-zinc chloride back titration 钛镍形状记忆合金化学分析方法 第1部分:镍量的测定 丁二酮肟沉淀分离-EDTA络合-氯化锌返滴定法 |
China National Standards EL |
English PDF |
GB/T 23613-2009 |
Methods for chemical analysis of osmium powder - Determination of magnesium, iron, nickEL, aluminum, copper, silver, gold, platinum, iridium, palladium, rhodium and silicon content - Inductively coupled plasma atomic emission spectrometry 锇粉化学分析方法 镁、铁、镍、铝、铜、银、金、铂、铱、钯、铑、硅量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards EL |
English PDF |
GB/T 23612-2009 |
Anodizing and ELectrophoretic painting technical specification on wrought aluminium alloy extruded profiles for architecture 铝合金建筑型材阳极氧化与阳极氧化电泳涂漆工艺技术规范 |
China National Standards EL |
English PDF |
GB/T 23607-2009 |
Methods for chemical analysis of copper anode mud - Determination of arsenic,bismuth,iron,nickEL,lead,antimony,selenium and tellurium content - Inductively coupled plasma-atomic emission spectrometry 铜阳极泥化学分析方法 砷、铋、铁、镍、铅、锑、硒、碲量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards EL |
English PDF |
GB/T 13748.21-2009 |
Chemical analysis methods of magnesium and magnesium alloys - Part 21: Determination of ELements by photoelectric direct reading atomic emission spectrometry 镁及镁合金化学分析方法 第21部分:光电直读原子发射光谱分析方法测定元素含量 |
China National Standards EL |
English PDF |
GB/T 13748.20-2009 |
Chemical analysis methods of magnesium and magnesium alloys - Part 20: Determination of ELements by inductively coupled plasma atomic emission spectrometry 镁及镁合金化学分析方法 第20部分:ICP-AES测定元素含量 |
China National Standards EL |
English PDF |
GB/T 11066.8-2009 |
Method for chemical analysis of gold - Determination of silver, copper, iron, lead, antimony, bismuth, palladium, magnesium, nickEL, manganese and chromium content - Ethyl acetate extration-inductively coupled plasma - Atomic emission spectrometry 金化学分析方法 银、铜、铁、铅、锑、铋、钯、镁、镍、锰和铬量的测定 乙酸乙酯萃取-电感耦合等离子体原子发射光谱法 |
China National Standards EL |
English PDF |
GB/T 11066.7-2009 |
Methods for chemical analysis of gold - Determination of silver, copper, iron, lead, antimony, bismuth, palladium, magnesium, tin, nickEL, manganese and chromium contents - Spark atomic emission spectrometry 金化学分析方法 银、铜、铁、铅、锑、铋、钯、镁、锡、镍、锰和铬量的测定 火花原子发射光谱法 |
China National Standards EL |
English PDF |
GB/T 11066.6-2009 |
Methods for chemical analysis of gold - Determination of magnesium, nickEL, manganese, palladium contents - Flame atomic absorption spectrometry 金化学分析方法 镁、镍、锰和钯量的测定 火焰原子吸收光谱法 |
China National Standards EL |
English PDF |
GB/T 23545-2009 |
Determination of manganese in white wine - InductivELy coupled plasma atomic emission spectrometry 白酒中锰的测定 电感耦合等离子体原子发射光谱法 |
China National Standards EL |
English PDF |
GB/T 23587-2009 |
VermicELli 粉条 |
China National Standards EL |
English PDF |
GB/T 7920.17-2009 |
SteEL reinforcement (bar) processing machinery - Terminology 钢筋加工机械 术语 |
China National Standards EL |
English PDF |
GB/T 23583.2-2009 |
Molten steEL ladle - Part 2: Technical requirements 钢液浇包 第2部分:技术条件 |
China National Standards EL |
English PDF |
GB/T 23583.1-2009 |
Molten steEL ladle - Part 1: Types and basic parameters 钢液浇包 第1部分:型式与基本参数 |
China National Standards EL |
English PDF |
GB/T 23572-2009 |
Hydraulic system general specifications for metEL-cutting machine tools 金属切削机床 液压系统通用技术条件 |
China National Standards EL |
English PDF |
GB/T 23570-2009 |
WELding parts for metal cutting machines - General specifications 金属切削机床焊接件 通用技术条件 |
China National Standards EL |
English PDF |
GB/T 23568.1-2009 |
RELiability evaluation for function units of machine tools - Part 1: General rule 机床功能部件可靠性评定 第1部分:总则 |
China National Standards EL |
English PDF |
GB/T 23567.1-2009 |
RELiability evaluation for numerical control machine tools - Part 1: General rule 数控机床可靠性评定 第1部分:总则 |
China National Standards EL |
English PDF |
GB/T 23483-2009 |
Test standard for overall heat transfer coefficient of building envELope and heat supply for space heating 建筑物围护结构传热系数及采暖供热量检测方法 |
China National Standards EL |
English PDF |
GB 12011-2009 |
Foot protection - ELectrically insulating footwear 足部防护 电绝缘鞋 |
China National Standards EL |
English PDF |
GB/T 4103.15-2009 |
Methods for chemical analysis of lead and lead alloys - Part 15: Determination of nickEL content - Flame atomic absorption spectrophotometry 铅及铅合金化学分析方法 第15部分:镍量的测定 火焰原子吸收光谱法 |
China National Standards EL |
English PDF |
GB/T 23524-2009 |
Test method of spent petrochemical catalyst - Determination of platinum - InductivELy coupled plasma atomic emision spectrometry 石油化工废催化剂中铂含量的测定 电感耦合等离子体原子发射光谱法 |
China National Standards EL |
English PDF |
GB/T 15512-2009 |
Technical guides for evaluating the saving of iron and steEL product in enterprise 评价企业节约钢铁材料技术导则 |
China National Standards EL |
English PDF |
GB/T 23510-2009 |
FuEL methanol for motor vehicles 车用燃料甲醇 |
China National Standards EL |
English PDF |
GB/T 21412.9-2009 |
Petroleum and natural gas industries - Design and operation of subsea production systems - Part 9: RemotELy operated tool (ROT) intervention systems 石油天然气工业 水下生产系统的设计与操作 第9部分:遥控操作工具 (ROT) 维修系统 |
China National Standards EL |
English PDF |
GB/T 16805-2009 |
Pressure testing of liquid petroleum pipELines 液体石油管道压力试验 |
China National Standards EL |
English PDF |
GB/T 23374-2009 |
Determination of aluminium in foods - InductivELy coupled plasma mass spectrometry 食品中铝的测定 电感耦合等离子体质谱法 |
China National Standards EL |
English PDF |
GB/T 23470.2-2009 |
Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 2: Recruitment and training of panEL leaders 感官分析 感官分析实验室人员一般导则 第2部分:评价小组组长的聘用和培训 |
China National Standards EL |
English PDF |
GB/T 22838.2-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 2: Length - PhotoELectricity method 卷烟和滤棒物理性能的测定 第2部分:长度 光电法 |
China National Standards EL |
English PDF |
GB/T 23566.4-2009 |
Sliding guide steEL-plate punch holders of stamping dies - Part 4: Four-pillar punch holders 冲模滑动导向钢板上模座 第4部分:四导柱上模座 |
China National Standards EL |
English PDF |
GB/T 23566.3-2009 |
Sliding guide steEL-plate punch holders of stamping dies - Part 3: Center-pillar punch holders 冲模滑动导向钢板上模座 第3部分:中间导柱上模座 |
China National Standards EL |
English PDF |
GB/T 23566.2-2009 |
Sliding guide steEL-plate punch holders of stamping dies - Part 2: Diagonal-pillar punch holders 冲模滑动导向钢板上模座 第2部分:对角导柱上模座 |
China National Standards EL |
English PDF |
GB/T 23566.1-2009 |
Sliding guide steEL-plate punch holders of stamping dies - Part 1: Rear-pillar punch holders 冲模滑动导向钢板上模座 第1部分:后侧导柱上模座 |
China National Standards EL |
English PDF |
GB/T 23565.4-2009 |
Sliding guide steEL-plate die sets of stamping dies - Part 4: Four-pillar die sets 冲模滑动导向钢板模架 第4部分:四导柱模架 |
China National Standards EL |
English PDF |
GB/T 23565.3-2009 |
Sliding guide steEL-plate die sets of stamping dies - Part 3: Center-pillar die sets 冲模滑动导向钢板模架 第3部分:中间导柱模架 |
China National Standards EL |
English PDF |
GB/T 23565.2-2009 |
Sliding guide steEL-plate die sets of stamping dies - Part 2: Diagonal-pillar die sets 冲模滑动导向钢板模架 第2部分:对角导柱模架 |
China National Standards EL |
English PDF |
GB/T 23565.1-2009 |
Sliding guide steEL-plate die sets of stamping dies - Part 1: Rear-pillar die sets 冲模滑动导向钢板模架 第1部分:后侧导柱模架 |
China National Standards EL |
English PDF |
GB/T 23564.4-2009 |
Ball-bearing guide steEL-plate punch holders of stamping dies - Part 4: Four-pillar punch holders 冲模滚动导向钢板上模座 第4部分:四导柱上模座 |
China National Standards EL |
English PDF |
GB/T 23564.3-2009 |
Ball-bearing guide steEL-plate punch holders of stamping dies - Part 3: Center-pillar punch holders 冲模滚动导向钢板上模座 第3部分:中间导柱上模座 |
China National Standards EL |
English PDF |
GB/T 23564.2-2009 |
Ball-bearing guide steEL-plate punch holders of stamping dies - Part 2: Diagonal-pillar punch holders 冲模滚动导向钢板上模座 第2部分:对角导柱上模座 |
China National Standards EL |
English PDF |
GB/T 23564.1-2009 |
Ball-bearing guide steEL-plate punch holders of stamping dies - Part 1: Rear-pillar punch holders 冲模滚动导向钢板上模座 第1部分:后侧导柱上模座 |
China National Standards EL |
English PDF |
GB/T 23563.4-2009 |
Ball-bearing guide steEL-plate die sets of stamping dies - Part 4: Four-pillar die sets 冲模滚动导向钢板模架 第4部分:四导柱模架 |
China National Standards EL |
English PDF |
GB/T 23563.3-2009 |
Ball-bearing guide steEL-plate die sets of stamping dies - Part 3: Center-pillar die sets 冲模滚动导向钢板模架 第3部分:中间导柱模架 |
China National Standards EL |
English PDF |
GB/T 23563.2-2009 |
Ball-bearing guide steEL-plate die sets of stamping dies - Part 2: Diagonal-pillar die sets 冲模滚动导向钢板模架 第2部分:对角导柱模架 |
China National Standards EL |
English PDF |
GB/T 23563.1-2009 |
Ball-bearing guide steEL-plate die sets of stamping dies - Part 1: Rear-pillar die sets 冲模滚动导向钢板模架 第1部分:后侧导柱模架 |
China National Standards EL |
English PDF |
GB/T 23562.4-2009 |
SteEL-plate die holders of stamping dies - Part 4: Four-pillar die holders 冲模钢板下模座 第4部分:四导柱下模座 |
China National Standards EL |
English PDF |
GB/T 23562.3-2009 |
SteEL-plate die holders of stamping dies - Part 3: Center-pillar die holders 冲模钢板下模座 第3部分:中间导柱下模座 |
China National Standards EL |
English PDF |
GB/T 23562.2-2009 |
SteEL-plate die holders of stamping dies - Part 2: Diagonal-pillar die holders 冲模钢板下模座 第2部分:对角导柱下模座 |
China National Standards EL |
English PDF |
GB/T 23562.1-2009 |
SteEL-plate die holders of stamping dies - Part 1: Rear-pillar die holders 冲模钢板下模座 第1部分:后侧导柱下模座 |
China National Standards EL |
English PDF |
GB/T 23507.3-2009 |
Criterion for ELectriacl equipment for oil drilling rig - Part 3: The diesel generating set for electric drilling rig 石油钻机用电气设备规范 第3部分:电动钻机用柴油发电机组 |
China National Standards EL |
English PDF |
GB/T 17386-2009 |
Sizing and sELection of electric submersible pump installations 潜油电泵装置的规格选用 |
China National Standards EL |
English PDF |
GB/T 23480.2-2009 |
Small hole high speed drilling ELectro-discharge machines - Part 2: Parameters 电火花小孔高速加工机床 第2部分:参数 |
China National Standards EL |
English PDF |
GB/T 23480.1-2009 |
Small hole high speed drilling ELectro-discharge machines - Part 1: Terminology and testing of accuracy 电火花小孔高速加工机床 第1部分:术语和精度检验 |
China National Standards EL |
English PDF |
GB/T 14896.8-2009 |
Non-traditional machines - Terminology - Part 8: ELectric melting explosion machines 特种加工机床 术语 第8部分:电熔爆加工机床 |
China National Standards EL |
English PDF |
GB/T 14896.3-2009 |
Non-traditional machines - Terminology - Part 3: ELectrochemical machines 特种加工机床 术语 第3部分:电解加工机床 |
China National Standards EL |
English PDF |
GB/T 14896.2-2009 |
Non-traditional machines - Terminology - Part 2: ELectro-discharge machines 特种加工机床 术语 第2部分:电火花加工机床 |
China National Standards EL |
English PDF |
GB/T 10595-2009 |
BELt conveyors 带式输送机 |
China National Standards EL |
English PDF |
GB/T 3609.2-2009 |
Occupational eye and face protection - WELding protection - Part 2: Automatic welding filter 职业眼面部防护 焊接防护 第2部分:自动变光焊接滤光镜 |
China National Standards EL |
English PDF |
GB/T 23466-2009 |
GuidELine for selection of hearing protectors 护听器的选择指南 |
China National Standards EL |
English PDF |
GB/T 23414-2009 |
Microbeam analysis - Scanning ELectron microscopy - Vocabulary 微束分析 扫描电子显微术 术语 |
China National Standards EL |
English PDF |
GB 8965.2-2009 |
Protective clothing - Flame-retardant protection - Part 2: Protective clothing for wELders 防护服装 阻燃防护 第2部分:焊接服 |
China National Standards EL |
English PDF |
GB 4053.3-2009 |
Safety requirements for fixed steEL ladders and platform - Part 3: Industrial guardrails and steel platform 固定式钢梯及平台安全要求 第3部分:工业防护栏杆及钢平台 |
China National Standards EL |
English PDF |
GB 4053.2-2009 |
Safety requirements for fixed steEL ladders and platform - Part 2: Steel inclined ladders 固定式钢梯及平台安全要求 第2部分:钢斜梯 |
China National Standards EL |
English PDF |
GB 4053.1-2009 |
Safety requirements for fixed steEL ladders and platform - Part 1: Steel vertical ladders 固定式钢梯及平台安全要求 第1部分:钢直梯 |
China National Standards EL |
English PDF |
GB 23394-2009 |
SELf-contained closed-circuit breathing apparatus of compressed oxygen 自给闭路式压缩氧气呼吸器 |
China National Standards EL |
English PDF |
GB 15599-2009 |
Safety rules of lightning with rELation to petroleum and its facilities 石油与石油设施雷电安全规范 |
China National Standards EL |
English PDF |
GB 13348-2009 |
Safety rules of static ELectricity with relation to liquid petroleum products 液体石油产品静电安全规程 |
China National Standards EL |
English PDF |
GB/T 7185-2009 |
Hydraulic steering gear of inland vessEL 内河船液压舵机 |
China National Standards EL |
English PDF |
GB/T 23438-2009 |
GuidELine of maintenance system survey for ship 船舶维修保养体系检验导则 |
China National Standards EL |
English PDF |
GB/T 23436-2009 |
Cleaning fluids for automotive windshiELd 汽车风窗玻璃清洗液 |
China National Standards EL |
English PDF |
GB/T 23435-2009 |
Cleaning fluids for ELectronic fuel injection automobile nozzle 电喷汽车喷油嘴清洗液 |
China National Standards EL |
English PDF |
GB/T 17424-2009 |
Technical requirements of differential global navigation satELlite system 差分全球导航卫星系统(DGNSS)技术要求 |
China National Standards EL |
English PDF |
GB/T 13561.3-2009 |
Safety rules on port’s continuous handling facilities - Part 3: BELt conveyers,mass conveyer and bucket elevator 港口连续装卸设备安全规程 第3部分:带式输送机、埋刮板输送机和斗式提升机 |
China National Standards EL |
English PDF |
GB/T 12303-2009 |
Measurement of sound pressure levEL for sound signal appliances by seagoing vessel 海船声号器具的声压级测量 |
China National Standards EL |
English PDF |
GB/T 23296.15-2009 |
Food contact materials - Polymer - Determination of 2,4,6-triamino-1,3,5-triazine(mELamine)in food simulants - High performance liquid chromatography 食品接触材料 高分子材料 食品模拟物中2,4,6-三氨基-1,3,5-三嗪(三聚氰胺)的测定 高效液相色谱法 |
China National Standards EL |
English PDF |
GB/T 23398-2009 |
Product of geographical indications - Hami mELon 地理标志产品 哈密瓜 |
China National Standards EL |
English PDF |
GB/T 8141-2009 |
ShELlac for use in arms 军用紫胶片 |
China National Standards EL |
English PDF |
GB/T 23411-2009 |
Determination of residues of 17 quniolones in royal jELly - LC-MS/MS method 蜂王浆中17种喹诺酮类药物残留量的测定 液相色谱-质谱/质谱法 |
China National Standards EL |
English PDF |
GB/T 23409-2009 |
Determination of residues of oxytetracycline, tetracycline, chlortetracycline, and doxycycline in royal jELly - LC-MS/MS method 蜂王浆中土霉素、四环素、金霉素、强力霉素残留量的测定 液相色谱-质谱/质谱法 |
China National Standards EL |
English PDF |
GB/T 23407-2009 |
Determination of residues of nitroimidazoles and their metabolites in royal jELly - LC-MS/MS method 蜂王浆中硝基咪唑类药物及其代谢物残留量的测定 液相色谱-质谱/质谱法 |
China National Standards EL |
English PDF |
GB/T 23392.3-2009 |
Technical specification for the forecast of diseases and insects on cruciferous plants - Part 3: PlutELla xylostella linnaeus 十字花科蔬菜病虫害测报技术规范 第3部分:小菜蛾 |
China National Standards EL |
English PDF |
Find out:14959Items | To Page of: First -Previous-Next -Last | [96] [97] [98] [99] [100] [101] [102] |