GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 756-2010 |
Cylindrical shaft extEnsion for rotating electrical machines 旋转电机 圆柱形轴伸 |
China National Standards En |
English PDF |
GB/Z 25320.4-2010 |
Power systems managemEnt and associated information exchange - Data and communications security - Part 4: Profiles including MMS 电力系统管理及其信息交换 数据和通信安全 第4部分:包含MMS的协议集 |
China National Standards En |
English PDF |
GB/Z 25320.3-2010 |
Power systems managemEnt and associated information exchange - Data and communications security - Part 3: Communication network and system security -Profiles including TCP/IP 电力系统管理及其信息交换 数据和通信安全 第3部分:通信网络和系统安全 包含TCP/IP的协议集 |
China National Standards En |
English PDF |
GB/Z 25320.1-2010 |
Power systems managemEnt and associated information exchange - Data and communications security - Part 1: Communication network and system security -Introduction to security issues 电力系统管理及其信息交换 数据和通信安全 第1部分:通信网络和系统安全 安全问题介绍 |
China National Standards En |
English PDF |
GB/T 6999-2010 |
Relative humidity tables for Environmental test 环境试验用相对湿度查算表 |
China National Standards En |
English PDF |
GB/T 4960.7-2010 |
Glossary of terms for nuclear sciEnce and technology Part 7: Nuclear materials control and safeguards 核科学技术术语 第7部分:核材料管制与核保障 |
China National Standards En |
English PDF |
GB/T 4960.3-2010 |
Glossary of terms - nuclear sciEnce and technology - Part 3: Nuclear fuel and nuclear fuel cycle 核科学技术术语 第3部分:核燃料与核燃料循环 |
China National Standards En |
English PDF |
GB/T 4960.1-2010 |
Glossary of terms - nuclear sciEnce and technology - part 1: Nuclear physics and nuclear chemistry 核科学技术术语 第1部分:核物理与核化学 |
China National Standards En |
English PDF |
GB/T 27320-2010 |
Food defEnse plan and guidelines for its application - Food processing establishments 食品防护计划及其应用指南 食品生产企业 |
China National Standards En |
English PDF |
GB/T 25455-2010 |
Electrophones musical instrumEnts playback equipment - Specification of assessment for musical performance 电鸣乐器放音设备 设备音乐性能评价规范 |
China National Standards En |
English PDF |
GB/T 25454-2010 |
GEneral specification for equalization equipment of electrophones musical instruments 电鸣乐器均衡类音效装置通用技术条件 |
China National Standards En |
English PDF |
GB/T 25451-2010 |
PHWR fuel elemEnt coating-measurement of thickness-beta backscatter method 重水堆核电厂燃料元件涂层厚度测量β射线背散射法 |
China National Standards En |
English PDF |
GB/T 25450-2010 |
Eddy currEnt testing of fuel element end cap weld for PHWR 重水堆核电厂燃料元件端塞焊缝涡流检测 |
China National Standards En |
English PDF |
GB/T 25446-2010 |
Specification and technical requiremEnts for oil-immersed amorphous alloy core distribution transformers 油浸式非晶合金铁心配电变压器技术参数和要求 |
China National Standards En |
English PDF |
GB/T 25444.3-2010 |
Mobile and fixed offshore units - Electrical installations - Part 3: EquipmEnt 移动式和固定式近海设施 电气装置 第3部分:设备 |
China National Standards En |
English PDF |
GB/T 25442-2010 |
Standard methods for determining losses and efficiEncy of rotating electrical machines from tests(excluding machines for traction vehicles) 旋转电机(牵引电机除外)确定损耗和效率的试验方法 |
China National Standards En |
English PDF |
GB/T 25438-2010 |
Specification and technical requiremEnts for three-phase oil-immersed tridimensional toroidal-core distribution transformers 三相油浸式立体卷铁心配电变压器技术参数和要求 |
China National Standards En |
English PDF |
GB/T 25321-2010 |
Guidelines for manufacture managemEnt of safer consumer products 消费品安全制造管理指南 |
China National Standards En |
English PDF |
GB/T 25318-2010 |
Locking devices for ball and socket couplings of string insulator units:DimEnsions and tests. 绝缘子串元件球窝联接用锁紧销:尺寸和试验 |
China National Standards En |
English PDF |
GB/T 25317-2010 |
DimEnsions of clevis and tongue couplings of string insulator units 绝缘子串元件的槽型连接尺寸 |
China National Standards En |
English PDF |
GB/T 25314-2010 |
RequiremEnts of corrosion management program for mechanical equipment in nuclear power plants 核电厂机械设备腐蚀管理大纲内容要求 |
China National Standards En |
English PDF |
GB/T 25313-2010 |
The standardization for the evaluation of electromagnetic field distribution of welding equipmEnt 焊接设备电磁场检测与评估准则 |
China National Standards En |
English PDF |
GB/T 25312-2010 |
The standardization for the evaluation of welder exposure to electromagnetic field of welding equipmEnt 焊接设备电磁场对操作人员影响程度的评价准则 |
China National Standards En |
English PDF |
GB/T 25309-2010 |
High-voltage direct currEnt transfer switches 高压直流转换开关 |
China National Standards En |
English PDF |
GB/T 25307-2010 |
High-voltage direct currEnt by-pass switches 高压直流旁路开关 |
China National Standards En |
English PDF |
GB/T 25306-2010 |
Standard of electron accelerator facility Engineering for radiation processing 辐射加工用电子加速器工程通用规范 |
China National Standards En |
English PDF |
GB/T 25304-2010 |
Specific requiremEnts for non-vascular self-expanding metallic stents 非血管自扩张金属支架专用要求 |
China National Standards En |
English PDF |
GB/T 25303-2010 |
Specification for high efficiEncy permanent magnet synchronous motor for textile purpose(Frame size 90~225) 纺织专用高效率永磁同步电动机技术条件 (机座号 90~225) |
China National Standards En |
English PDF |
GB/T 25302-2010 |
Specification for high efficiEncy three-phase induction motor for textile purpose (Frame size 90~225) 纺织专用高效率三相异步电动机技术条件 (机座号90~225) |
China National Standards En |
English PDF |
GB/T 25301-2010 |
Resistance welding equipmEnt - General specifications applicable to all transformers 电阻焊设备 适用于所有变压器的通用技术条件 |
China National Standards En |
English PDF |
GB/T 25300-2010 |
Resistance welding equipmEnt - Particular specfications applicable to transformers with one secondary winding for multi-spot welding, as used in the automobile industry 电阻焊设备 汽车工业中使用的具有一个次级线圈的多点焊变压器特殊技术条件 |
China National Standards En |
English PDF |
GB/T 25299-2010 |
Resistance welding equipmEnt - Particular specfications applicable to transformers with two separate secondary windings for multi-spot welding, as used in the automobile industry 电阻焊设备 汽车工业中使用的具有两个独立次级线圈的多点焊变压器特殊技术条件 |
China National Standards En |
English PDF |
GB/T 25298-2010 |
The gEneral specifications for resistance welding controller 电阻焊机控制器 通用技术条件 |
China National Standards En |
English PDF |
GB/T 25297.2-2010 |
Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 2: Parallel shank fixing for End-thrust electrodes 电阻点焊 电极接头,外锥度1:10 第2部分:末端插入式圆柱柄配合 |
China National Standards En |
English PDF |
GB/T 25296-2010 |
Guidelines on gEneral tests for safety of electrical equipments 电气设备安全通用试验导则 |
China National Standards En |
English PDF |
GB/T 25295-2010 |
Guidelines on safety designs for electric equipmEnts 电气设备安全设计导则 |
China National Standards En |
English PDF |
GB/T 25294-2010 |
GEneral technical requirements for cabinets of synthesized control equipments in electrical power system 电力综合控制机柜通用技术要求 |
China National Standards En |
English PDF |
GB/T 25293-2010 |
Mechanical door lock for cabinets of electrotechnical and electronic equipmEnt 电工电子设备机柜 机械门锁 |
China National Standards En |
English PDF |
GB/T 25292-2010 |
Specification for direct currEnt machine in ships 船用直流电机技术条件 |
China National Standards En |
English PDF |
GB/T 25289-2010 |
Specification and technical requiremEnts for 20kV oil-immersed distribution transformers 20kV油浸式配电变压器技术参数和要求 |
China National Standards En |
English PDF |
GB/T 25288-2010 |
188W-188Re chromatographic gEnerator 188W-188Re色层发生器 |
China National Standards En |
English PDF |
GB/T 19520.17-2010 |
Mechanical structures for electronic equipmEnt - Dimension of mechanical structures of the 482.6 mm(19 in)series - Part 3-105: Dimensions and design aspects for 1U high chassis 电子设备机械结构 482.6mm“(19in)系列机械结构尺寸 第3-105部分:1U高度机箱的尺寸和设计要求 |
China National Standards En |
English PDF |
GB/T 16927.3-2010 |
High-voltage test techniques - Part3: Definitions and requiremEnts for on-site testing 高电压试验技术 第3部分: 现场试验的定义及要求 |
China National Standards En |
English PDF |
GB/T 16896.2-2010 |
Digital recorders for measuremEnts in high-voltage impulse tests - Part 2: software requirement 高电压冲击测量仪器和软件 第2部分: 软件的要求 |
China National Standards En |
English PDF |
GB/T 15474-2010 |
Classification on instrumEntation and control function of instrumentation and control systems important to safety for nuclear power plants 核电厂安全重要仪表和控制功能分类 |
China National Standards En |
English PDF |
GB/T 14598.9-2010 |
Measuring relays and protection equipmEnt - Part 22-3:Electrical disturbance tests - Radiated electromagnetic field immunity 量度继电器和保护装置 第22-3部分:电气骚扰试验 辐射电磁场抗扰度 |
China National Standards En |
English PDF |
GB/T 14598.14-2010 |
Measuring relays and protection equipmEnt - Part 22-2: Electrical disturbance tests - Electrostatic discharge tests 量度继电器和保护装置 第22-2部分:电气骚扰试验--静电放电试验 |
China National Standards En |
English PDF |
GB/T 14597-2010 |
Environmental climatic conditions appearing in different altitudes for electrical products 电工产品不同海拔的气候环境条件 |
China National Standards En |
English PDF |
GB/T 13627-2010 |
Criteria for accidEnt monitoring instrumentation for nuclear power generating stations 核电厂事故监测仪表准则 |
China National Standards En |
English PDF |
GB/T 13165-2010 |
Methods of measuremEnt on noise emitted by arc welding machine 电弧焊机噪声测定方法 |
China National Standards En |
English PDF |
GB/T 12162.4-2010 |
X and gamma referEnce radiation for calibrating dosemeters and doserate meters and for determining their response as a function of photon energy - Part 4: Calibration of area and personal dosemeters in low energy X reference radiation fields 用于校准剂量仪和剂量率仪及确定其能量响应的X和γ参考辐射 第4部分:低能X射线参考辐射场中场所和个人剂量仪的校准 |
China National Standards En |
English PDF |
GB/T 8190.9-2010 |
Reciprocating internal combustion Engines - Exhaust emission measurement - Part 9: Test cycles and test procedures for test-bed measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第9部分:压燃式发动机瞬态工况排气烟度的试验台测量用试验循环和测试规程 |
China National Standards En |
English PDF |
GB/T 8190.4-2010 |
Reciprocating internal combustion Engines - Exhaust emission measurement - Part 4: Steady-state test cycles for different engine applications 往复式内燃机 排放测量 第4部分:不同用途发动机的稳态试验循环 |
China National Standards En |
English PDF |
GB/T 8190.1-2010 |
Reciprocating internal combustion Engines - Exhaust emission measurement - Part 1: Test-bed measurement of gaseous and particulate exhaust emissions 往复式内燃机 排放测量 第1部分:气体和颗粒排放物的试验台测量 |
China National Standards En |
English PDF |
GB/T 8190.10-2010 |
Reciprocating internal combustion Engines - Exhaust emission measurement - Part 10: Test cycles and test procedures for field measurement of exhaust gas smoke emissions from compression ignition engines operating under transient conditions 往复式内燃机 排放测量 第10部分:压燃式发动机瞬态工况排气烟度的现场测量用试验循环和测试规程 |
China National Standards En |
English PDF |
GB/T 6809.8-2010 |
Reciprocating internal combustion Engines - Vocabulary of components and systems - Part 8: Starting systems 往复式内燃机 零部件和系统术语 第8部分:起动系统 |
China National Standards En |
English PDF |
GB/T 6809.5-2010 |
Reciprocating internal combustion Engines - Vocabulary of components and systems - Part 5: Cooling systems 往复式内燃机 零部件和系统术语 第5部分:冷却系统 |
China National Standards En |
English PDF |
GB/T 6118-2010 |
End mills - Technical specifications 立铣刀技术条件 |
China National Standards En |
English PDF |
GB/T 6117.3-2010 |
End mills - Part 3: Milling cutters with 7:24 taper shanks 立铣刀 第3部分:7:24锥柄立铣刀 |
China National Standards En |
English PDF |
GB/T 6117.2-2010 |
End mills - Part 2: Milling cutters with morse taper shanks 立铣刀 第2部分:莫氏锥柄立铣刀 |
China National Standards En |
English PDF |
GB/T 6117.1-2010 |
End mills - Part 1: Milling cutters with parallel shanks 立铣刀 第1部分:直柄立铣刀 |
China National Standards En |
English PDF |
GB/T 25430-2010 |
Specification for drill through equipmEnt - Rotating control devices 钻通设备 旋转防喷器规范 |
China National Standards En |
English PDF |
GB/T 25424-2010 |
Tractors and machinery for agricultural and forestry - WindowscreEn wiper 农林拖拉机和机械 风挡玻璃雨刷器 |
China National Standards En |
English PDF |
GB/T 25416-2010 |
Complete equipmEnt for cottonseed delinting 棉籽脱绒成套设备 |
China National Standards En |
English PDF |
GB/T 25411-2010 |
IB single-stage cEntrifugal pumps IB型单级离心泵 |
China National Standards En |
English PDF |
GB/T 25403-2010 |
Test facilities for agricultural irrigation equipmEnt 农业灌溉设备用试验装置 |
China National Standards En |
English PDF |
GB/T 25402-2010 |
EquipmEnt for crop protection - Sprayers - Demonstration track for field crop sprayers 植物保护机械 喷雾机 大田作物喷雾机用试验跑道 |
China National Standards En |
English PDF |
GB/T 25401-2010 |
Agricultural machinery - Manure spreaders - Environmental protection - Requirements and test methods 农业机械 厩肥撒施机 环保要求和试验方法 |
China National Standards En |
English PDF |
GB/T 25398-2010 |
Agricultural trailers and trailed equipmEnt - Braking cylinders - Specifications 农用挂车和牵引式机具 制动用液压缸 技术要求 |
China National Standards En |
English PDF |
GB/T 25395-2010 |
EquipmEnt for vine cultivation and wine making - Grape presses - Methods of test 葡萄栽培和葡萄酒酿制设备 葡萄压榨机 试验方法 |
China National Standards En |
English PDF |
GB/T 25394-2010 |
EquipmEnt for vine cultivation and wine making - Mash pumps - Methods of test 葡萄栽培和葡萄酒酿制设备 果浆泵 试验方法 |
China National Standards En |
English PDF |
GB/T 25393-2010 |
EquipmEnt for vine cultivation and wine making - Grape-harvesting machinery - Test methods 葡萄栽培和葡萄酒酿制设备 葡萄收获机 试验方法 |
China National Standards En |
English PDF |
GB/T 25392-2010 |
Agricultural Engineering - Electrical and electronic equipment - Testing resistance to environmental conditions 农业工程 电气和电子设备 对环境条件的耐久试验 |
China National Standards En |
English PDF |
GB/T 25389.2-2010 |
Wind turbine low-speed permanEnt magnet synchronous generator - Part 2: Testing methods 风力发电机组 低速永磁同步发电机 第2部分:试验方法 |
China National Standards En |
English PDF |
GB/T 25389.1-2010 |
Wind turbine low-speed permanEnt magnet synchronous generator - Part 1: Technical conditions 风力发电机组 低速永磁同步发电机 第1部分:技术条件 |
China National Standards En |
English PDF |
GB/T 25388.2-2010 |
Double-fed converter of wind turbine gEnerator system - Part 2: Test method 风力发电机组 双馈式变流器 第2部分:试验方法 |
China National Standards En |
English PDF |
GB/T 25388.1-2010 |
Double-fed converter of wind turbine gEnerator system - Part 1: Technical condition 风力发电机组 双馈式变流器 第1部分:技术条件 |
China National Standards En |
English PDF |
GB/T 25387.2-2010 |
Full-power converter of wind turbine gEnerator systems - Part 2: Test method 风力发电机组 全功率变流器 第2部分:试验方法 |
China National Standards En |
English PDF |
GB/T 25387.1-2010 |
Full-power converter of wind turbine gEnerator systems - Part 1: Technical condition 风力发电机组 全功率变流器 第1部分:技术条件 |
China National Standards En |
English PDF |
GB/T 25386.2-2010 |
Wind turbine gEnerator system - Variable speed constant frequency control system - Part 2: Test method 风力发电机组 变速恒频控制系统 第2部分:试验方法 |
China National Standards En |
English PDF |
GB/T 25386.1-2010 |
Wind turbine gEnerator system variable speed constant frequency control system - Part 1: Technical condition 风力发电机组 变速恒频控制系统 第1部分:技术条件 |
China National Standards En |
English PDF |
GB/T 25385-2010 |
Operation and maintEnance requirement for wind turbines 风力发电机组 运行及维护要求 |
China National Standards En |
English PDF |
GB/T 25384-2010 |
Turbine blade of wind turbine gEnerator systems - Full-scale structural testing of rotor blades 风力发电机组 风轮叶片全尺寸结构试验 |
China National Standards En |
English PDF |
GB/T 25383-2010 |
Wind turbine gEnerator system - Rotor blades 风力发电机组 风轮叶片 |
China National Standards En |
English PDF |
GB/T 25382-2010 |
Regulations for operational acceptance test of off-grid wind/solar hybrid gEnerator system 离网型风光互补发电系统 运行验收规范 |
China National Standards En |
English PDF |
GB/T 25381-2010 |
GEnealogy of wind turbine generator system 风力发电机组 系列型谱 |
China National Standards En |
English PDF |
GB/T 25378-2010 |
Collets with 8°setting angle for tool shanks - Collets,nuts and fitting dimEnsions 工具柄用8°安装锥的弹簧夹头 弹簧夹头、螺母和配合尺寸 |
China National Standards En |
English PDF |
GB/T 25376-2010 |
Metal-cutting machine tools - GEneral specifications of machining parts 金属切削机床 机械加工件通用技术条件 |
China National Standards En |
English PDF |
GB/T 25373-2010 |
Metal-cutting machine tools - GEneral specifications of assembling 金属切削机床 装配通用技术条件 |
China National Standards En |
English PDF |
GB/T 25371-2010 |
Foundry machinery - MeasuremEnt method of sound pressure level 铸造机械 噪声声压级测量方法 |
China National Standards En |
English PDF |
GB/T 25368-2010 |
Electronic control common rail fuel injection system for diesel Engines - The high-pressure supply pump - Specifications 柴油机电控共轨喷油系统高压供油泵总成 技术条件 |
China National Standards En |
English PDF |
GB/T 25367-2010 |
Electronic control common rail fuel injection system for diesel Engines - The injector - Specifications 柴油机电控共轨喷油系统喷油器总成 技术条件 |
China National Standards En |
English PDF |
GB/T 25366-2010 |
Electronic control common rail fuel injection system for diesel Engines - The rail - Specifications 柴油机电控共轨喷油系统共轨管总成 技术条件 |
China National Standards En |
English PDF |
GB/T 25365.1-2010 |
Electronic control common rail fuel injection system for diesel Engines - Specifications - Part 1: Machinery 柴油机电控共轨喷油系统总成 技术条件 第1部分:机械 |
China National Standards En |
English PDF |
GB/T 25364.1-2010 |
Turbocharger seal rings - Part 1: GEneral specifications 涡轮增压器密封环 第1部分:技术条件 |
China National Standards En |
English PDF |
GB/T 25363-2010 |
Electromechanical solEnoid fuel injector assemblies of gasoline engines - Testing methods 汽油机电磁阀式喷油器总成 试验方法 |
China National Standards En |
English PDF |
GB/T 25362-2010 |
Electromechanical solEnoid fuel injector assemblies of gasoline engines - Technical requirements 汽油机电磁阀式喷油器总成 技术条件 |
China National Standards En |
English PDF |
GB/T 25361.2-2010 |
Internal combustion Engines - Piston pins - Part 2: Inspection measuring principles 内燃机 活塞销 第2部分:检验规则 |
China National Standards En |
English PDF |
GB/T 25361.1-2010 |
Internal combustion Engines - Piston pins - Part 1: General specifications 内燃机 活塞销 第1部分:技术要求 |
China National Standards En |
English PDF |
GB/T 25357-2010 |
Petroleum, petrochemical and natural gas industries - Process positive-displacemEnt rotary-type compressors 石油、石化及天然气工业流程用容积式回转压缩机 |
China National Standards En |
English PDF |
Find out:30005Items | To Page of: First -Previous-Next -Last | [178] [179] [180] [181] [182] [183] [184] |