GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 21976.3-2012 |
Escape apparatus for building fire - Part 3: Escape Ladder 建筑火灾逃生避难器材 第3部分:逃生梯 |
China National Standards La |
English PDF |
GB/T 9945-2012 |
Hot-rolled bulb fLats 热轧球扁钢 |
China National Standards La |
English PDF |
GB/T 3286.4-2012 |
Methods for chemical analysis of limestone and dolomite - Part 4: The determination of iron oxide content - The o-phenanthroline spectrophotometric method and the fLame atomic absorption spectrometric method 石灰石及白云石化学分析方法 第4部分:氧化铁含量的测定 邻二氮杂菲分光光度法和火焰原子吸收光谱法 |
China National Standards La |
English PDF |
GB/T 3286.1-2012 |
Methods for chemical analysis of limestone and dolomite - Part 1: The determination of calcium oxide and magnesium oxide content - The complexometric titration method and the fLame atomic absorption spectrometric method 石灰石及白云石化学分析方法 第1部分:氧化钙和氧化镁含量的测定 络合滴定法和火焰原子吸收光谱法 |
China National Standards La |
English PDF |
GB/T 28909-2012 |
Extra-high strength structural steel pLates in the heat-treatment condition 超高强度结构用热处理钢板 |
China National Standards La |
English PDF |
GB/T 28907-2012 |
Sulfuric acid dew-point corrosion resistance steel pLates and strips 耐硫酸露点腐蚀钢板和钢带 |
China National Standards La |
English PDF |
GB/T 28905-2012 |
Low yield strength steel pLates for construction 建筑用低屈服强度钢板 |
China National Standards La |
English PDF |
GB/T 28897-2012 |
Steel pipes of complex pLastic 钢塑复合管 |
China National Standards La |
English PDF |
GB/T 28765-2012 |
Packaging material - Test methods for organic vapor transmission rate for pLastic film, sheet and package 包装材料 塑料薄膜、片材和容器的有机气体透过率试验方法 |
China National Standards La |
English PDF |
GB/T 18116.1-2012 |
Yttrium-europium oxide - Part 1: Determination of Lanthanum oxide, cerium oxide, praseodymium oxide, neodymium oxide, samarium oxide, gadolinium oxide, terbium oxide, dysprosium oxide, holmium oxide, erbium oxide, thulium oxide, ytterbium oxide and luteti 氧化钇铕化学分析方法 第1部分:氧化镧、氧化铈、氧化镨、氧化钕、氧化钐、氧化钆、氧化铽、氧化镝、氧化钬、氧化铒、氧化铥、氧化镱和氧化镥量的测定 |
China National Standards La |
English PDF |
GB/T 16763-2012 |
Shaped insuLating refractory products - Classification 定形隔热耐火制品分类 |
China National Standards La |
English PDF |
GB/T 15547-2012 |
BLanks of forged steel rolls for cold rolling mill 锻钢冷轧辊辊坯 |
China National Standards La |
English PDF |
GB 4706.64-2012 |
Safety of household and simiLar electrical appliances - Part 2: Particular requirements for scissor type grass shears 家用和类似用途电器的安全 第2部分:剪刀型草剪的专用要求 |
China National Standards La |
English PDF |
GB 3883.9-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for tappers 手持式电动工具的安全 第2部分:攻丝机的专用要求 |
China National Standards La |
English PDF |
GB 3883.8-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for sheet metal shears and nibblers 手持式电动工具的安全 第2部分:电剪刀和电冲剪的专用要求 |
China National Standards La |
English PDF |
GB 3883.7-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for hammers 手持式电动工具的安全 第2部分:锤类工具的专用要求 |
China National Standards La |
English PDF |
GB 3883.6-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for drills and impact drills 手持式电动工具的安全 第2部分:电钻和冲击电钻的专用要求 |
China National Standards La |
English PDF |
GB 3883.4-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for sanders and polishers other than disk type 手持式电动工具的安全 第2部分:非盘式砂光机和抛光机的专用要求 |
China National Standards La |
English PDF |
GB 3883.2-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for screwdrivers and impact wrenches 手持式电动工具的安全 第2部分:螺丝刀和冲击扳手的专用要求 |
China National Standards La |
English PDF |
GB 3883.21-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for band saws 手持式电动工具的安全 第2部分:带锯的专用要求 |
China National Standards La |
English PDF |
GB 3883.20-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for strapping tools 手持式电动工具的安全 第2部分:捆扎机的专用要求 |
China National Standards La |
English PDF |
GB 3883.19-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for drain cleaners 手持式电动工具的安全 第2部分:管道疏通机的专用要求 |
China National Standards La |
English PDF |
GB 3883.12-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for concrete vibrators 手持式电动工具的安全 第2部分:混凝土振动器的专用要求 |
China National Standards La |
English PDF |
GB 3883.11-2012 |
Safety of hand-held motor-operated electric tools - Part 2: ParticuLar requirements for reciprocating saws(jig and sabre saws) 手持式电动工具的安全 第2部分:往复锯(曲线锯、刀锯)的专用要求 |
China National Standards La |
English PDF |
GB 28884-2012 |
Seamless steel tubes for Large volume gas cylinder 大容积气瓶用无缝钢管 |
China National Standards La |
English PDF |
GB 19215.3-2012 |
Cable trunking and ducting systems for electrical instalLations - Part 2-2: Particular requirements - Cable trunking systems and cable ducting systems intended for underfloor and flushfloor installations 电气安装用电缆槽管系统 第2部分:特殊要求 第2节:安装在地板下和与地板齐平的电缆槽管系统 |
China National Standards La |
English PDF |
GB 18079-2012 |
Health protection zone for geLatin industry 动物胶制造业卫生防护距离 |
China National Standards La |
English PDF |
GB 17464-2012 |
Connecting devices - Electrical copper conductors - Safety requirements for screw-type and screwless-type cLamping units - Part 1: General requirements and particular requirements for clamping units for conductors from 0.2 mm2 up to 35 mm2 (included) 连接器件 电气铜导线 螺纹型和无螺纹型夹紧件的安全要求 适用于0.2 mm2以上至35 mm2(包括)导线的夹紧件的通用要求和特殊要求 |
China National Standards La |
English PDF |
GB/T 7631.13-2012 |
Lubricants,industrial oils and reLated products(class L) - Classification - Part 13: Family A(Total loss systems) 润滑剂、工业用油和有关产品(L类)的分类 第13部分:A组(全损耗系统) |
China National Standards La |
English PDF |
GB/T 6075.2-2012 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating parts - Part 2: Land-based steam turbines and generators in excess of 50MW with normal operating speeds of 1500r/min,1800r/min,3000r/min and 3600r/min 机械振动 在非旋转部件上测量评价机器的振动 第2部分:50MW以上,额定转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards La |
English PDF |
GB/T 4214.7-2012 |
Household and simiLar electrical appliances - Test code for determination of airborne acoustical noise - Particular requirements for tumble dryers 家用和类似用途电器噪声测试方法 滚筒式干衣机的特殊要求 |
China National Standards La |
English PDF |
GB/T 28912-2012 |
Test method for two phase reLative permeability in rock 岩石中两相流体相对渗透率测定方法 |
China National Standards La |
English PDF |
GB/T 28911-2012 |
VocabuLary of drilling engineering for the petroleum and natural gas 石油天然气钻井工程术语 |
China National Standards La |
English PDF |
GB/T 28804-2012 |
Copper-free silver mirror on fLat glass 无铜镀银玻璃镜 |
China National Standards La |
English PDF |
GB/T 28799.3-2012 |
PLastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 3: Fittings 冷热水用耐热聚乙烯(PE-RT)管道系统 第3部分:管件 |
China National Standards La |
English PDF |
GB/T 28799.2-2012 |
PLastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 2: Pipes 冷热水用耐热聚乙烯(PE-RT)管道系统 第2部分:管材 |
China National Standards La |
English PDF |
GB/T 28799.1-2012 |
PLastics piping systems for hot and cold water installations - Polyethylene of raised temperature resistance (PE-RT) - Part 1: General 冷热水用耐热聚乙烯(PE-RT)管道系统 第1部分:总则 |
China National Standards La |
English PDF |
GB/T 28798-2012 |
PLastic storage box 塑料收纳箱 |
China National Standards La |
English PDF |
GB/T 28797-2012 |
Indoor pLastic trash bin 室内塑料垃圾桶 |
China National Standards La |
English PDF |
GB/T 28795-2012 |
Cold cathode ultraviolet germicidal Lamps 冷阴极紫外线杀菌灯 |
China National Standards La |
English PDF |
GB/T 28785-2012 |
Mechanical vibration - Criteria and safeguards for the in-situ baLancing of medium and large rotors 机械振动 大中型转子现场平衡的准则和防护 |
China National Standards La |
English PDF |
GB/T 28784.3-2012 |
Mechanical vibration - Measurement of vibration on ships - Part 3: Pre-instalLation vibration measurement of shipboard equipment 机械振动 船舶振动测量 第3部分:船上设备安装前的振动测量 |
China National Standards La |
English PDF |
GB/T 28779-2012 |
Rolling bearings - Insert bearing units - CLassification 滚动轴承 带座外球面球轴承 分类 |
China National Standards La |
English PDF |
GB/T 28772-2012 |
CLassification of internal combustion engine oils 内燃机油分类 |
China National Standards La |
English PDF |
GB/T 28767-2012 |
CLassification of automotive gear lubricants 车辆齿轮油分类 |
China National Standards La |
English PDF |
GB/T 27894.5-2012 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 5: Determination of nitrogen,carbon dioxideand C1 to C5 and C6+ hydrocarbons for a Laboratory and on-line process application using three columns 天然气 在一定不确定度下用气相色谱法测定组成 第5部分:实验室和在线工艺系统中用三根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards La |
English PDF |
GB/T 27894.4-2012 |
Natural gas - Determination of composition with defined uncertainty by gas chromatography - Part 4: Determination of nitrogen,carbon dioxide and C1 to C5 and C6+ hydrocarbons for a Laboratory and on-line measuring system using two columns 天然气 在一定不确定度下用气相色谱法测定组成 第4部分:实验室和在线测量系统中用两根色谱柱测定氮、二氧化碳和C1至C5及C6+的烃类 |
China National Standards La |
English PDF |
GB/T 17477-2012 |
Automotive gear lubricant viscosity cLassification 汽车齿轮润滑剂黏度分类 |
China National Standards La |
English PDF |
GB/T 15623.3-2012 |
Hydraulic fluid power - Electrically moduLated hydraulic control valves - Part 3: Test methods for pressure control valves 液压传动 电调制液压控制阀 第3部分:压力控制阀试验方法 |
China National Standards La |
English PDF |
GB/T 13346-2012 |
Metallic and other inorganic coatings - ElectropLated coatings of cadmium with supplementary treatments on iron or steel 金属及其它无机覆盖层 钢铁上经过处理的镉电镀层 |
China National Standards La |
English PDF |
GB/T 11348.2-2012 |
Mechanical vibration - Evaluation of machines vibration by measurements on rotating shafts - Part 2: Land-based steam turbine - generators in excess of 50MW with normal operating speeds of 1500r/min,1800r/min,3000r/min and 3600r/min 机械振动 在旋转轴上测量评价机器的振动 第2部分:功率大于50MW,额定工作转速1500 r/min、1800 r/min、3000 r/min、3600 r/min陆地安装的汽轮机和发电机 |
China National Standards La |
English PDF |
GB/T 7333-2012 |
Fixed capacitors for use in electronic equipment - Part 2-1: BLank detail specification - Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors - Assessment levels E and EZ 电子设备用固定电容器 第2-1部分:空白详细规范 金属化聚乙烯对苯二甲酸酯膜介质 直流固定电容器 评定水平E和EZ |
China National Standards La |
English PDF |
GB/T 5969-2012 |
Fixed capacitors for use in electronic equipment - Part 9-1: BLank detail specification:Fixed capacitor of ceramic dielectric,Class 2 - Assessment level EZ 电子设备用固定电容器 第9-1部分:空白详细规范 2类瓷介固定电容器 评定水平 EZ |
China National Standards La |
English PDF |
GB/T 4597-2012 |
VocabuLary of electronic tubes 电子管词汇 |
China National Standards La |
English PDF |
GB/T 28879-2012 |
NomencLature of model for electrotechnical instruments 电工仪器仪表产品型号编制方法 |
China National Standards La |
English PDF |
GB/T 28876.1-2012 |
FLammability of materials in space experimental facilities - Part 1: Requirements 空间实验设备使用材料的可燃性 第1部分:要求 |
China National Standards La |
English PDF |
GB/T 28864.2-2012 |
Terms and nomencLature for cores made of magnetically soft ferrites - Part 2: Reference of dimensions 软磁铁氧体磁心术语定义 第2部分:尺寸标注 |
China National Standards La |
English PDF |
GB/T 28864.1-2012 |
Terms and nomencLature for cores made of magnetically soft ferrites - Part 1: Terms used for physical irregularities 软磁铁氧体磁心术语定义 第1部分:物理缺陷术语 |
China National Standards La |
English PDF |
GB/T 28862-2012 |
Method for processing sample of encapsuLating material of powdered epoxy 环氧粉末包封料试样加工方法 |
China National Standards La |
English PDF |
GB/T 28861-2012 |
Test method for measuring melt fluidity of encapsuLating material of powdered epoxy 环氧粉末包封料熔融流动性试验方法 |
China National Standards La |
English PDF |
GB/T 28860-2012 |
Test method for the determination of get time of encapsuLating material of powdered epoxy 环氧粉末包封料胶化时间测定方法 |
China National Standards La |
English PDF |
GB/T 28859-2012 |
EncapsuLating material of powdered epoxy for electronic components 电子元器件用环氧粉末包封料 |
China National Standards La |
English PDF |
GB/T 28858-2012 |
EncapsuLating material of phenolic for electronic components 电子元器件用酚醛包封料 |
China National Standards La |
English PDF |
GB/T 28857-2012 |
Direct-current linear variable differential transformer (DC-DC LVDT)dispLacement transducers 直流差动变压器式位移传感器 |
China National Standards La |
English PDF |
GB/T 28853-2012 |
Thermostatic baths and circuLators - Heated circulators 恒温槽与恒温循环装置 高温恒温循环装置 |
China National Standards La |
English PDF |
GB/T 28850-2012 |
Thermostatic baths and circuLators - Heated liquid baths 恒温槽与恒温循环装置 高温恒温槽 |
China National Standards La |
English PDF |
GB/T 26831.3-2012 |
Society energy metering for reading system specification - Part 3: Dedicated application Layer 社区能源计量抄收系统规范 第3部分:专用应用层 |
China National Standards La |
English PDF |
GB/T 26831.2-2012 |
Society energy metering for reading system specification - Part 2: Physical and link Layer 社区能源计量抄收系统规范 第2部分:物理层与链路层 |
China National Standards La |
English PDF |
GB/T 18910.61-2012 |
Liquid crystal dispLay devices - Part 6-1: Measuring methods for liquid crystal display devices - Photoelectric parameter 液晶显示器件 第6-1部分:液晶显示器件测试方法 光电参数 |
China National Standards La |
English PDF |
GB/T 18910.11-2012 |
Liquid crystal dispLay devices - Part 1-1: Terminology and symbols 液晶显示器件 第1-1部分:术语和符号 |
China National Standards La |
English PDF |
GB/T 18216.2-2012 |
Electrical safety in low voltage distribution systems up to 1000 V a.c. and 1500 V d.c. - Equipment for testing, measuring or monitoring of protective measures - Part 2: InsuLation resistance 交流1000V和直流1500V以下低压配电系统电气安全 防护措施的试验、测量或监控设备 第2部分:绝缘电阻 |
China National Standards La |
English PDF |
GB/T 17249.3-2012 |
Acoustics - Recommended practice for the design of low-noise workpLaces containing machinery - Part 3: Sound propagation and noise prediction in workrooms 声学 低噪声工作场所设计指南 第3部分:工作间内的声传播和噪声预测 |
China National Standards La |
English PDF |
GB/T 17207-2012 |
Fixed capacitors for use in electronic equipment - Part 18-1: BLank detail specification - Fixed aluminium electrolytic surface mount - Capacitors with solid(MnO2) electrolyte - Assessment level EZ 电子设备用固定电容器 第18-1部分:空白详细规范 表面安装固体(MnO2)电解质铝固定电容器 评定水平EZ |
China National Standards La |
English PDF |
GB/T 16608.55-2012 |
Electromechanical all-or-nothing reLays - Part 55: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 11mm×7,5mm (max)base 有或无机电继电器 第55部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,11mm×7.5mm(最大)底座 |
China National Standards La |
English PDF |
GB/T 16608.54-2012 |
Electromechanical all-or-nothing reLays - Part 54: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 15mm×7,5mm base 有或无机电继电器 第54部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,15mm×7.5mm底座 |
China National Standards La |
English PDF |
GB/T 16608.53-2012 |
Electromechanical all-or-nothing reLays - Part 53: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 14mm×9mm base 有或无机电继电器 第53部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,14mm×9mm底座 |
China National Standards La |
English PDF |
GB/T 16608.52-2012 |
Electromechanical all-or-nothing reLays - Part 52: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Two change-over contacts, 20mm×10mm base 有或无机电继电器 第52部分:空白详细规范 电信用有质量评定的有或无机电继电器 两组转换触点,20mm×10mm底座 |
China National Standards La |
English PDF |
GB/T 16608.51-2012 |
Electromechanical all-or-nothing reLays - Part 51: Blank detail specification - Electromechanical all-or-nothing telecom relays of assessed quality - Non-standardized types and construction 有或无机电继电器 第51部分:空白详细规范 电信用有质量评定的有或无机电继电器 非标准类型和结构 |
China National Standards La |
English PDF |
GB/T 16608.50-2012 |
Electromechanical all-or-nothing reLays - Part 50: Sectional specification - Electromechanical all-or-nothing telecom relays of assessed quality 有或无机电继电器 第50部分:分规范 电信用有质量评定的有或无机电继电器 |
China National Standards La |
English PDF |
GB/T 15862-2012 |
General specification of ion impLantation equipment 离子注入机通用规范 |
China National Standards La |
English PDF |
GB/T 15490-2012 |
General specification for solid state Lasers 固体激光器总规范 |
China National Standards La |
English PDF |
GB/T 12859.201-2012 |
Piezoelectric ceramic resonators - A specification in the quality assessment System for electronic components - Part 2-1: BLank detail specification-Assessment level E 电子元器件质量评定体系规范 压电陶瓷谐振器 第2-1部分:空白详细规范-评定水平E |
China National Standards La |
English PDF |
GB/T 12274.1-2012 |
Quartz crystal controlled oscilLators of assessed quality - Part 1: Generic specification 有质量评定的石英晶体振荡器 第1部分:总规范 |
China National Standards La |
English PDF |
GB/T 12273.501-2012 |
Quartz crystal units A specification in the quality assessment system for electronic components Part 5.1: BLank detail specification- qualification approval 石英晶体元件 电子元器件质量评定体系规范 第5.1部分:空白详细规范 鉴定批准 |
China National Standards La |
English PDF |
GB/T 12083-2012 |
Power supply series for gas Laser 气体激光器电源系列 |
China National Standards La |
English PDF |
GB/T 10186-2012 |
Fixed capacitors for use in electronic equipment - Part 7-1: BLank detail spicification - Fixed polystyrene film dielectric metal foil d.c. capacitors - Assessment level E 电子设备用固定电容器 第7-1部分:空白详细规范 金属箔式聚苯乙烯膜介质直流固定电容器 评定水平E |
China National Standards La |
English PDF |
GB/T 4798.9-2012 |
CLassification of environmental conditions - Classification of groups of environmental parameters and their severities - Microclimates inside products 环境条件分类 环境参数组分类及其严酷程度分级 产品内部的微气候 |
China National Standards La |
English PDF |
GB/T 4798.6-2012 |
CLassification of environmental conditions - Classification of groups of environmental parameters and their severities - Ship evironment 环境条件分类 环境参数组分类及其严酷程度分级 船用 |
China National Standards La |
English PDF |
GB/T 28825-2012 |
Information technology - Learning, education and training - CLassification code of learning object 信息技术 学习、教育和培训 学习对象分类代码 |
China National Standards La |
English PDF |
GB/T 28824-2012 |
Information technology - Learning,education and training - Digital rights expression Language 信息技术 学习、教育和培训 数字权利描述语言 |
China National Standards La |
English PDF |
GB/T 28823-2012 |
Information technology - Learning,education and training - CLassification code of platform and media XML binding specification 信息技术 学习、教育和培训 平台与媒体分类代码XML绑定规范 |
China National Standards La |
English PDF |
GB/T 28821-2012 |
Technical requirements of reLational database management system 关系数据管理系统技术要求 |
China National Standards La |
English PDF |
GB/T 28809-2012 |
Railway applications - Communication, signaling and processing systems - Safety reLated electronic systems for signaling 轨道交通 通信、信号和处理系统 信号用安全相关电子系统 |
China National Standards La |
English PDF |
GB/T 28752-2012 |
Test method for Lateral spread of flame on building and transport products in vertical configuration 火焰在垂直表面的横向蔓延试验方法 |
China National Standards La |
English PDF |
GB/T 28751-2012 |
The method of editing energy baLance table for enterprises 企业能量平衡表编制方法 |
China National Standards La |
English PDF |
GB/T 28749-2012 |
The method of drawing energy baLance network diagram for enterprises 企业能量平衡网络图绘制方法 |
China National Standards La |
English PDF |
GB/T 28747-2012 |
General principles of stipuLating assessment indicator system for product of resources recycling 资源循环利用产品评价指标体系编制通则 |
China National Standards La |
English PDF |
GB/T 28746-2012 |
Specification of storage tank of domestic soLar water heating system 家用太阳能热水系统储水箱技术要求 |
China National Standards La |
English PDF |
GB/T 28745-2012 |
Test methods for storage tank of domestic soLar water heating system 家用太阳能热水系统储水箱试验方法 |
China National Standards La |
English PDF |
GB/T 28841-2012 |
ReguLations of service operation for household electronic and electrical appliances maintenance industry 家用电子电器维修业服务经营规范 |
China National Standards La |
English PDF |
Find out:15610Items | To Page of: First -Previous-Next -Last | [71] [72] [73] [74] [75] [76] [77] |