Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 28521-2012 |
IntelLigent energy saving system by fresh air for telecommunication stations/sites 通信局站用智能新风节能系统 |
China National Standards Li |
 English PDF |
| GB/T 28520-2012 |
IntelLigent heat exchanger for telecommunication stations/sites 通信局站用智能热交换系统 |
China National Standards Li |
English PDF |
| GB/T 28513-2012 |
AppLication profile-Sign language and lip-reading real-time conversation using low bit-rate video communication 使用低比特率视频通信的手语和唇读实时会话应用配置 |
China National Standards Li |
English PDF |
| GB/T 28511.2-2012 |
Integrated optical path devices based on planar Lightwave circuit - Part 2 ：DWDM filter based on AWG technology 平面光波导集成光路器件 第2部分：基于阵列波导光栅（AWG）技术的密集波分复用（DWDM）滤波器 |
China National Standards Li |
English PDF |
| GB/T 28511.1-2012 |
Integrated optical path devices based on planar Lightwave circuit - Part 1：Optical power splitter based on PLC technology 平面光波导集成光路器件 第1部分：基于平面光波导（PLC）的光功率分路器 |
China National Standards Li |
English PDF |
| GB/T 28509-2012 |
Ultrafine coaxial cables with insulation diameter below 1mm and cable assembLies 绝缘外径在1mm以下的极细同轴电缆及组件 |
China National Standards Li |
English PDF |
| GB/T 28507-2012 |
Description guideLines for voice exhibition of web documents 互联网文本语音展现通用描述规范 |
China National Standards Li |
English PDF |
| GB/T 28506-2012 |
Technical specification for national No.7 signalLing system - GSM mobile telephone user part (MTUP) 国内No.7信令方式技术要求 GSM移动电话用户部分（MTUP） |
China National Standards Li |
English PDF |
| GB/T 28505-2012 |
Technical specification of national No.7 signaLing system 2Mbit/s high speed link 国内No.7信令方式技术要求 2Mbit/s高速信令链路 |
China National Standards Li |
English PDF |
| GB/T 28503-2012 |
Technical requirements of adaptation layer of No.7 signalLing interworking with IP MTP2 user adaptation layer No.7信令与IP互通适配层技术要求消息传递部分 （MTP）第二级用户适配层（M2UA） |
China National Standards Li |
English PDF |
| GB/T 28502-2012 |
Technical requirement of interworking between No.7 signalLing and IP No.7信令与IP互通的技术要求 |
China National Standards Li |
English PDF |
| GB/T 28500-2012 |
Technical requirements of 900/1800MHz TDMA digital cellular mobile network signaLing system NO.7 ISUP 900/1800MHz TDMA 数字蜂窝移动通信网No.7 ISUP信令技术要求 |
China National Standards Li |
English PDF |
| GB/T 28458-2012 |
Information security technology - VulnerabiLity identification and description specification 信息安全技术 安全漏洞标识与描述规范 |
China National Standards Li |
English PDF |
| GB/T 28457-2012 |
Testing specification for appLications of SSL protocol SSL协议应用测试规范 |
China National Standards Li |
English PDF |
| GB/T 28456-2012 |
Testing specification for appLications of IPsec protocol IPsec协议应用测试规范 |
China National Standards Li |
English PDF |
| GB/T 28452-2012 |
Information security technology - Common security technique requirement for appLication software system 信息安全技术 应用软件系统通用安全技术要求 |
China National Standards Li |
English PDF |
| GB/T 28450-2012 |
Information security technology - GuideLines for information security management system auditing 信息安全技术 信息安全管理体系审核指南 |
China National Standards Li |
English PDF |
| GB/T 28445-2012 |
Data quaLity specification for navigation electronic map in personal position 个人位置导航电子地图数据质量规范 |
China National Standards Li |
English PDF |
| GB/T 28444-2012 |
AppLication storage format for navigational electronic chart 导航电子海图应用存储格式 |
China National Standards Li |
English PDF |
| GB/T 28441-2012 |
Data quaLity specification for navigation electronic map in vehicle 车载导航电子地图数据质量规范 |
China National Standards Li |
English PDF |
| GB/T 28425-2012 |
IntelLigent transport systems - Message set template 智能运输系统 消息集模板 |
China National Standards Li |
English PDF |
| GB/T 28424-2012 |
Graphical symbols and cutLine for use in equipment of TV monitoring system for traffic 交通电视监控系统设备用图形符号及图例 |
China National Standards Li |
English PDF |
| GB/T 28407-2012 |
Regulation for gradation on agriculture land quaLity 农用地质量分等规程 |
China National Standards Li |
English PDF |
| GB/T 28399-2012 |
The safty rules for handLing in Ro-Ro terminal 商品车辆滚装专用码头滚装作业安全操作规程 |
China National Standards Li |
English PDF |
| GB/T 17216-2012 |
Hygienic requirements for peacetime utiLization of civil air defence works 人防工程平时使用环境卫生要求 |
China National Standards Li |
English PDF |
| GB/T 16819-2012 |
Specifications for planetabLing of 1:500 1:1 000 1:2 000 topographic maps 1:500 1:1 000 1:2 000地形图平板仪测量规范 |
China National Standards Li |
English PDF |
| GB 16361-2012 |
Specification for patient radiological protection and quaLity control in nuclear medicine 临床核医学的患者防护与质量控制规范 |
China National Standards Li |
English PDF |
| GB/T 19056-2012 |
Vehicle travelLing data recorder 汽车行驶记录仪 |
China National Standards Li |
English PDF |
| GB/T 17799.5-2012 |
Electromagnetic compatibiLity(EMC) - Generic standards - HEMP immunity for indoor equipment 电磁兼容 通用标准 室内设备高空电磁脉冲(HEMP)抗扰度 |
China National Standards Li |
English PDF |
| GB/T 17626.34-2012 |
Electromagnetic compatibiLity - Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with mains current more than 16 A per phase 电磁兼容 试验和测量技术 主电源每相电流大于16A的设备的电压暂降、短时中断和电压变化抗扰度试验 |
China National Standards Li |
English PDF |
| GB 18078.1-2012 |
Health protection zone for agricultural and sideLine food processing industry - Part 1：Slaughter，meat-processing industry 农副食品加工业卫生防护距离 第1部分：屠宰及肉类加工业 |
China National Standards Li |
English PDF |
| GB 18075.1-2012 |
Health protection zone for manufacturing industry of transportation faciLities - Part 1：Automobile industry 交通运输设备制造业卫生防护距离 第1部分：汽车制造业 |
China National Standards Li |
English PDF |
| GB 18068.4-2012 |
Health protection zone for non-metalLic mineral products industry - Part 4：Graphite and charcoal industry 非金属矿物制品业卫生防护距离 第4部分：石墨碳素制品业 |
China National Standards Li |
English PDF |
| GB 18068.3-2012 |
Health protection zone for non-metalLic mineral products industry - Part 3：Asbestos products industry 非金属矿物制品业卫生防护距离 第3部分：石棉制品业 |
China National Standards Li |
English PDF |
| GB 18068.2-2012 |
Health protection zone for non-metalLic mineral products industry - Part 2：Lime industry 非金属矿物制品业卫生防护距离 第2部分：石灰制造业 |
China National Standards Li |
English PDF |
| GB 18068.1-2012 |
Health protection zone for non-metalLic mineral products industry - Part 1：Cement industry 非金属矿物制品业卫生防护距离 第1部分：水泥制造业 |
China National Standards Li |
English PDF |
| GB 50156-2012 |
Code for design and construction of filLing station 汽车加油加气站设计与施工规范 |
China National Standards Li |
English PDF |
| GB 50741-2012 |
Code for investigation and surveying of 1000kV overhead transmission Line 1000kV架空输电线路勘测规范 |
China National Standards Li |
English PDF |
| GB 50343-2012 |
Technical code for protection of building electronic information system against Lightning 建筑物电子信息系统防雷技术规范 |
China National Standards Li |
English PDF |
| GB 50766-2012 |
Code for manufacture installation and acceptance of steel penstocks in hydroelectric and hydrauLic engineering 水电水利工程压力钢管制作安装及验收规范 |
China National Standards Li |
English PDF |
| GB/T 50743-2012 |
Code for recycLing of construction & demolition waste 工程施工废弃物再生利用技术规范 |
China National Standards Li |
English PDF |
| GB 50761-2012 |
Code for seismic design of petrochemical steel faciLities 石油化工钢制设备抗震设计规范 |
China National Standards Li |
English PDF |
| GB 50759-2012 |
Code for design of vapor recovery faciLities of oil products loading system 油品装载系统油气回收设施设计规范 |
China National Standards Li |
English PDF |
| GB 50729-2012 |
Code for acceptance of construction quaLity of ±800kV & under HVDC converter substation ±800kV及以下直流换流站土建工程施工质量验收规范 |
China National Standards Li |
English PDF |
| GB 50207-2012 |
Code for acceptance of construction quaLity of roof 屋面工程质量验收规范 |
China National Standards Li |
English PDF |
| GB 4789.38-2012 |
National Food Safety Standard-Food microbiology - Examination of Escherichia coLi counts 食品安全国家标准 食品微生物学检验 大肠埃希氏菌计数 |
China National Standards Li |
English PDF |
| GB 28404-2012 |
National Food Safety Standard - Determination of α - Linolenic Acid, Eicosapentaenoic Acid, Docosapentaenoic Acid and Docosahexaenoic Acid in the Health Food 食品安全国家标准 保健食品中α-亚麻酸、二十碳五烯酸、二十二碳五烯酸和二十二碳六烯酸的测定 |
China National Standards Li |
English PDF |
| GB 28401-2012 |
National Food Safety Standard - Food Additive - PhosphoLipid 食品安全国家标准 食品添加剂 磷脂 |
China National Standards Li |
English PDF |
| GB 28373-2012 |
Tank vehicles of categories N and O with regard to rollover stabiLity N类和O类罐式车辆侧倾稳定性 |
China National Standards Li |
English PDF |
| GB 567.2-2012 |
Bursting disc safety devices － Part 2：AppLication,selection and installation 爆破片安全装置 第2部分：应用、选择与安装 |
China National Standards Li |
English PDF |
| GB/T 28372-2012 |
Ferroalloys - SampLing and preparation of samples-General rules 铁合金 取样和制样总则 |
China National Standards Li |
English PDF |
| GB/T 28369-2012 |
Ferroalloys - Experimental methods for the evaluation of the quaLity variation and methods for checking the precision of sampling 铁合金 评价品质波动和检查取样精度的试验方法 |
China National Standards Li |
English PDF |
| GB/T 28300-2012 |
Surface quaLity classes for hot-rolled bars and rods technical delivery conditions 热轧棒材和盘条表面质量等级交货技术条件 |
China National Standards Li |
English PDF |
| GB/T 28292-2012 |
The technical specification for recycLing and utilization of Fe-bearing dusts and sludges in iron and steel industry 钢铁工业含铁尘泥回收及利用技术规范 |
China National Standards Li |
English PDF |
| GB/T 28287-2012 |
Foot protection - Test method for footwear sLip resistance 足部防护 鞋防滑性测试方法 |
China National Standards Li |
English PDF |
| GB/T 239.2-2012 |
MetalLic materials - Wire - Part 2: Reverse torsion test 金属材料 线材 第2部分：双向扭转试验方法 |
China National Standards Li |
English PDF |
| GB/T 239.1-2012 |
MetalLic materials - Wire - Part 1: Simple torsion test 金属材料 线材 第1部分：单向扭转试验方法 |
China National Standards Li |
English PDF |
| GB/Z 28283-2012 |
Guide for simulation and modeLing of thermal processing 热加工工艺仿真与模拟技术导则 |
China National Standards Li |
English PDF |
| GB/T 28281-2012 |
Plain bearings - QuaLity characteristics - Statistical process control (SPC) 滑动轴承 质量特性 统计过程控制(SPC) |
China National Standards Li |
English PDF |
| GB/T 28280-2012 |
Plain bearings - QuaLity characteristics - Calculation of machine and process capabilities 滑动轴承 质量特性 机器能力及过程能力的计算 |
China National Standards Li |
English PDF |
| GB/T 28277-2012 |
SiLicon-based MEMS fabrication technology - Measurement method of cutting and pull-press strength of micro bonding area 硅基MEMS制造技术 微键合区剪切和拉压强度检测方法 |
China National Standards Li |
English PDF |
| GB/T 28276-2012 |
SiLicon-based MEMS fabrication technology - Specification for the dissolved wafer process 硅基MEMS制造技术 体硅溶片工艺规范 |
China National Standards Li |
English PDF |
| GB/T 28275-2012 |
SiLicon-based MEMS fabrication technology - Specification for KOH etch process 硅基MEMS制造技术 氢氧化钾腐蚀工艺规范 |
China National Standards Li |
English PDF |
| GB/T 28274-2012 |
SiLicon-based MEMS fabrication technology - The basic regulation of layout design 硅基MEMS制造技术 版图设计基本规则 |
China National Standards Li |
English PDF |
| GB/T 28270-2012 |
IntelLigent valve electric actuator 智能型阀门电动装置 |
China National Standards Li |
English PDF |
| GB/T 28268-2012 |
RolLing bearings - Specifications of pressed cages 滚动轴承 冲压保持架技术条件 |
China National Standards Li |
English PDF |
| GB/T 16675.2-2012 |
Technical drawings - SimpLified representation - Part 2: Dimensioning 技术制图 简化表示法 第2部分：尺寸注法 |
China National Standards Li |
English PDF |
| GB/T 16675.1-2012 |
Technical drawings - SimpLified representation - Part 1: Pictorial presentation 技术制图 简化表示法 第1部分：图样画法 |
China National Standards Li |
English PDF |
| GB/T 12212-2012 |
Technical drawings - Dimensions,proportions and simpLified representation for welding symbols 技术制图 焊缝符号的尺寸、比例及简化表示法 |
China National Standards Li |
English PDF |
| GB 12268-2012 |
List of dangerous goods 危险货物品名表 |
China National Standards Li |
English PDF |
| GB/T 28392-2012 |
Road construction and road maintenance machinery and equipment - Hot-air recirculating-type asphalt pavement hot recycLing and maintenance machine 道路施工与养护机械设备 热风式沥青混合料再生修补机 |
China National Standards Li |
English PDF |
| GB/T 28391-2012 |
Building construction machinery and equipment - Manually mobile hydrauLic power units 建筑施工机械与设备 人力移动式液压动力站 |
China National Standards Li |
English PDF |
| GB/T 28389.2-2012 |
Auto index milLing head with axes A,C of main drive - Part 2: Specifications 主传动驱动型AC轴自动分度铣头 第2部分：技术条件 |
China National Standards Li |
English PDF |
| GB/T 28389.1-2012 |
Auto index milLing head with axes A,C of main drive - Part 1: Testing of accuracy 主传动驱动型AC轴自动分度铣头 第1部分：精度检验 |
China National Standards Li |
English PDF |
| GB/T 28388.2-2012 |
Swinging Linkage milling head with axes A,C - Part 2: Specifications 摆动式AC轴联动铣头 第2部分：技术条件 |
China National Standards Li |
English PDF |
| GB/T 28388.1-2012 |
Swinging Linkage milling head with axes A,C - Part 1: Testing of accuracy 摆动式AC轴联动铣头 第1部分：精度检验 |
China National Standards Li |
English PDF |
| GB/T 28386-2012 |
Noise measurement methods for printing, paper converting, paper making machines and auxiLiary equipment - Accuracy grades 2 and 3 印刷、纸加工、造纸机械和辅助设备的噪声测量方法 准确度等级2和3 |
China National Standards Li |
English PDF |
| GB/T 28385-2012 |
Printing machinery - DrilLing and sewing machine 印刷机械 锁线机 |
China National Standards Li |
English PDF |
| GB/T 14176-2012 |
Forestry machinery - GasoLine powered portable brush cutters and grass trimmers 林业机械 以汽油机为动力的便携式割灌机和割草机 |
China National Standards Li |
English PDF |
| GB/T 28266-2012 |
Non-destructive testing of pressure equipment - QuaLification of radiographic film digitization systems 承压设备无损检测 射线胶片数字化系统的鉴定方法 |
China National Standards Li |
English PDF |
| GB/T 16163-2012 |
Classification of gases filled in cyLinder 瓶装气体分类 |
China National Standards Li |
English PDF |
| GB/T 28264-2012 |
Lifting appliances - Managing system of safety monitoring 起重机械 安全监控管理系统 |
China National Standards Li |
English PDF |
| GB 18469-2012 |
QuaLity requirements for whole blood and blood components 全血及成分血质量要求 |
China National Standards Li |
English PDF |
| GB 11676-2012 |
National Food Safety Standard-SiLicone anti - stick coating 食品安全国家标准 有机硅防粘涂料 |
China National Standards Li |
English PDF |
| GB 28357-2012 |
National Food Safety Standard - Food Additive - Isoamyl SaLicylate 食品安全国家标准 食品添加剂 水杨酸异戊酯(柳酸异戊酯) |
China National Standards Li |
English PDF |
| GB 28356-2012 |
National Food Safety Standard - Food Additive - Ethyl SaLicylate 食品安全国家标准 食品添加剂 水杨酸乙酯(柳酸乙酯) |
China National Standards Li |
English PDF |
| GB 28355-2012 |
National Food Safety Standard - Food Additive - Methyl SaLicylate 食品安全国家标准 食品添加剂 水杨酸甲酯(柳酸甲酯) |
China National Standards Li |
English PDF |
| GB/T 28370-2012 |
Detect methods for the air quaLity inside long distance coach 长途客车内空气质量检测方法 |
China National Standards Li |
English PDF |
| GB 50763-2012 |
Codes for accessibiLity design 无障碍设计规范 |
China National Standards Li |
English PDF |
| GB 50206-2012 |
Code for acceptanc of construction quaLity of timber structures 木结构工程施工质量验收规范 |
China National Standards Li |
English PDF |
| GB 28245-2012 |
Noise Limits for automatic metalforming machinery 自动锻压机 噪声限值 |
China National Standards Li |
English PDF |
| GB 28243-2012 |
HydrauLic press brakes - Safety requirements 液压板料折弯机 安全技术要求 |
China National Standards Li |
English PDF |
| GB 28241-2012 |
HydrauLic presses - Safety requirements 液压机 安全技术要求 |
China National Standards Li |
English PDF |
| GB 28239-2012 |
Limits and measurement methods for non-road diesel engine specific fuel consumption and specific oil consumption 非道路用柴油机燃料消耗率和机油消耗率限值及试验方法 |
China National Standards Li |
English PDF |
| GB/Z 19579-2012 |
GuideLines for the criteria of performance excellence 卓越绩效评价准则实施指南 |
China National Standards Li |
English PDF |
| GB/T 6120-2012 |
Metal sLitting saw 锯片铣刀 |
China National Standards Li |
English PDF |
| GB/T 6119-2012 |
Side and face milLing cutter 三面刃铣刀 |
China National Standards Li |
English PDF |
| GB/T 28247-2012 |
Rotary gear milLing cutters 盘形齿轮铣刀 |
China National Standards Li |
English PDF |
| GB/T 22512.1-2012 |
Petroleum and natural gas industries - Rotary drilLing equipment - Part 1：Rotary drill stem elements 石油天然气工业 旋转钻井设备 第1部分：旋转钻柱构件 |
China National Standards Li |
English PDF |
| GB 3095-2012 |
Ambient air quaLity standard 环境空气质量标准 |
China National Standards Li |
English PDF |
| Find out:16065Items | To Page of: First -Previous-Next -Last | [84] [85] [86] [87] [88] [89] [90] |
+86-755-25831330
