GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 23365-2009 |
Electrochemical performance test of lithium cobalt oxide - Test method for specific capacity and charge-discharge efficiency of the first cycle 钴酸锂电化学性能测试 首次放电比容量及首次充放电效率测试方法 |
China National Standards al |
English PDF |
GB/T 23364.6-2009 |
Methods for chemical analysis of high purity indium oxide - Part 6: Determination of the loss on ignition - Gravimetric analysis 高纯氧化铟化学分析方法 第6部分:灼减量的测定 称量法 |
China National Standards al |
English PDF |
GB/T 23364.5-2009 |
Methods for chemical analysis of high purity indium oxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry 高纯氧化铟化学分析方法 第5部分:氯量的测定 硫氰酸汞分光光度法 |
China National Standards al |
English PDF |
GB/T 23364.4-2009 |
Methods for chemical analysis of high purity indium oxide - Part 4: Determination of aluminum, iron, copper, zinc, cadmium, lead and thallium content - Inductively coupled plasma mass spectrometry 高纯氧化铟化学分析方法 第4部分:铝、铁、铜、锌、镉、铅和铊量的测定 电感耦合等离子体质谱法 |
China National Standards al |
English PDF |
GB/T 23364.3-2009 |
Methods for chemical analysis of high purity indium oxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry 高纯氧化铟化学分析方法 第3部分:锑量的测定 原子荧光光谱法 |
China National Standards al |
English PDF |
GB/T 23364.2-2009 |
Methods for chemical analysis of high purity indium oxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry 高纯氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法 |
China National Standards al |
English PDF |
GB/T 23364.1-2009 |
Methods for chemical analysis of high purity indium oxide - Part 1: Determination of arsenic content - Atomic fluorescence spectrometry 高纯氧化铟化学分析方法 第1部分:砷量的测定 原子荧光光谱法 |
China National Standards al |
English PDF |
GB/T 23362.6-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 6: Determination of the loss on ignition - Gravimetric analysis 高纯氢氧化铟化学分析方法 第6部分:灼减量的测定 称量法 |
China National Standards al |
English PDF |
GB/T 23362.5-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 5: Determination of chlorine content - Mercuric sulfocyanide spectrophotometry 高纯氢氧化铟化学分析方法 第5部分:氯量的测定 硫氰酸汞分光光度法 |
China National Standards al |
English PDF |
GB/T 23362.4-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 4: Determination of aluminum, iron, copper, zinc, cadmium, lead and thallium content - Inductively coupled plasma mass spectrometry 高纯氢氧化铟化学分析方法 第4部分:铝、铁、铜、锌、镉、铅和铊量的测定 电感耦合等离子体质谱法 |
China National Standards al |
English PDF |
GB/T 23362.3-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 3: Determination of antimony content - Atomic fluorescence spectrometry 高纯氢氧化铟化学分析方法 第3部分:锑量的测定 原子荧光光谱法 |
China National Standards al |
English PDF |
GB/T 23362.2-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 2: Determination of tin content - Phenylfluorone spectrophotometry 高纯氢氧化铟化学分析方法 第2部分:锡量的测定 苯基荧光酮分光光度法 |
China National Standards al |
English PDF |
GB/T 23362.1-2009 |
Methods for chemical analysis of high purity indium hydroxide - Part 1: Determination of arsenic content - Atomic fluorescence spectrometry 高纯氢氧化铟化学分析方法 第1部分:砷量的测定 原子荧光光谱法 |
China National Standards al |
English PDF |
GB/T 23325-2009 |
Textiles - Determination of surfactant - Linear alkylbenzene sulfonates 纺织品 表面活性剂的测定 线性烷基苯磺酸盐 |
China National Standards al |
English PDF |
GB/T 23322-2009 |
Textiles - Determination of surfactant - alkylphenol ethoxylates 纺织品 表面活性剂的测定 烷基酚聚氧乙烯醚 |
China National Standards al |
English PDF |
GB/T 23321-2009 |
Textiles - Water resistance - Rain tests: Exposure to a horizontal water spray 纺织品 防水性 水平喷射淋雨试验 |
China National Standards al |
English PDF |
GB/T 23319.2-2009 |
Textiles - Determination of spirality after laundering - Part 2: Woven and knitted fabrics 纺织品 洗涤后扭斜的测定 第2部分:机织物和针织物 |
China National Standards al |
English PDF |
GB/T 23319.1-2009 |
Textiles - Determination of spirality after laundering - Part 1: Percentage of wale spirality change in knitted garments 纺织品 洗涤后扭斜的测定 第1部分:针织服装纵行扭斜的变化 |
China National Standards al |
English PDF |
GB/T 19981.4-2009 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 4: Procedure for testing performance when cleaning and finishing using simulated wetcleaning 纺织品 织物和服装的专业维护、干洗和湿洗 第4部分:使用模拟湿清洗和整烫时性能试验的程序 |
China National Standards al |
English PDF |
GB/T 19981.3-2009 |
Textiles - Professional care, drycleaning and wetcleaning of fabrics and garments - Part 3: Procedure for testing performance when cleaning and finishing using hydrocarbon solvent 纺织品 织物和服装的专业维护、干洗和湿洗 第3部分:使用烃类溶剂干洗和整烫时性能试验的程序 |
China National Standards al |
English PDF |
GB/T 50485-2009 |
Technical code for microirrigation engineering 微灌工程技术规范 |
China National Standards al |
English PDF |
GB/T 9334-2009 |
Electrical installation in ships - Shipboard telecommunication cables and radio-frequency cables - Shipboard flexible coaxial cables 船舶电气设备 船用通信电缆和射频电缆 船用同轴软电缆 |
China National Standards al |
English PDF |
GB/T 9333-2009 |
Electrical installation in ships - Shipboard telecommunication cables and radio-frequency cables - General instrumentation, control and communication cables 船舶电气设备 船用通信电缆和射频电缆 一般仪表、控制和通信电缆 |
China National Standards al |
English PDF |
GB/T 5584.4-2009 |
Rectangular copper or aluminuium and its alloy wires for electrical purposes - Part 4: Strip copper conductor 电工用铜、铝及其合金扁线 第4部分:铜带 |
China National Standards al |
English PDF |
GB/T 5584.3-2009 |
Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 3: Aluminium rectanglar wire 电工用铜、铝及其合金扁线 第3部分:铝扁线 |
China National Standards al |
English PDF |
GB/T 5584.2-2009 |
Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 2: Rectangular copper wire 电工用铜、铝及其合金扁线 第2部分:铜扁线 |
China National Standards al |
English PDF |
GB/T 5584.1-2009 |
Rectangular copper or aluminium and its alloy wires for electrical purposes - Part 1: General 电工用铜、铝及其合金扁线 第1部分:一般规定 |
China National Standards al |
English PDF |
GB/T 4909.1-2009 |
Test methods for bare wires - Part 1: General 裸电线试验方法 第1部分:总则 |
China National Standards al |
English PDF |
GB/T 3955-2009 |
Round aluminium wire for electrical purposes 电工圆铝线 |
China National Standards al |
English PDF |
GB/T 3953-2009 |
Round copper wire for electrical purposes 电工圆铜线 |
China National Standards al |
English PDF |
GB/T 23360-2009 |
Method of evaluating the thermal performance of enclosures 机壳热特性的估算方法 |
China National Standards al |
English PDF |
GB/T 23312.7-2009 |
Enamelled round aluminium winding wire - Part 7: Polyester or polyesterimide overcoated with polyamide-imide enamelled round aluminium wire, class 200 漆包铝圆绕组线 第7部分:200级聚酯或聚酯亚胺/聚酰胺酰亚胺复合漆包铝圆线 |
China National Standards al |
English PDF |
GB/T 23312.6-2009 |
Enamelled round aluminium winding wire - Part 6: Polyester or polyesterimide overcoated with polyamide enamelled round aluminium wire, class 180 漆包铝圆绕组线 第6部分:180级聚酯或聚酯亚胺/聚酰胺复合漆包铝圆线 |
China National Standards al |
English PDF |
GB/T 23312.5-2009 |
Enamelled round aluminium winding wire - Part 5: Polyesterimide enamelled round aluminium wire,class 180 漆包铝圆绕组线 第5部分:180级聚酯亚胺漆包铝圆线 |
China National Standards al |
English PDF |
GB/T 23312.4-2009 |
Enamelled round aluminium winding wire - Part 4: Polyester enamelled round aluminium wire, class 155 漆包铝圆绕组线 第4部分:155级聚酯漆包铝圆线 |
China National Standards al |
English PDF |
GB/T 23312.3-2009 |
Enamelled round aluminium winding wire - Part 3: Polyester enamelled round aluminium wire, class 130 漆包铝圆绕组线 第3部分:130级聚酯漆包铝圆线 |
China National Standards al |
English PDF |
GB/T 23312.2-2009 |
Enamelled round aluminium winding wire - Part 2: Polyvinyl acetal enamelled round aluminium wire, class 120 漆包铝圆绕组线 第2部分:120级缩醛漆包铝圆线 |
China National Standards al |
English PDF |
GB/T 23312.1-2009 |
Enamelled round aluminium winding wire - Part 1: General requirements 漆包铝圆绕组线 第1部分:一般规定 |
China National Standards al |
English PDF |
GB/T 23309-2009 |
aluminium-magnesium alloy wires for shield in cable 电缆屏蔽用铝镁合金线 |
China National Standards al |
English PDF |
GB/T 23308-2009 |
aluminium-magnesium-silicon alloy wire for overhead line conductors 架空绞线用铝-镁-硅系合金圆线 |
China National Standards al |
English PDF |
GB/T 23294-2009 |
Abrasion resistant refractory materials 耐磨耐火材料 |
China National Standards al |
English PDF |
GB/T 19520.15-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分:基于连接器的插箱和插件的接口尺寸 |
China National Standards al |
English PDF |
GB/T 19520.14-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-103: Keying and alignment pin 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-103部分:编码键和定位销 |
China National Standards al |
English PDF |
GB/T 19520.13-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-102: Injector/extractor handle 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-102部分:插拔器手柄 |
China National Standards al |
English PDF |
GB/T 19520.12-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) series - Part 3-101: Subracks and associated plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-101部分:插箱及其插件 |
China National Standards al |
English PDF |
GB/T 19290.5-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2-3: Sectional specification - Interface co-ordination dimensions for the 25mm equipment practice - Extended detail specification - Dimensions for subrack 发展中的电子设备构体机械结构模数序列 第2-3部分:分规范 25mm设备构体的接口协调尺寸 扩展的详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards al |
English PDF |
GB/T 19290.4-2009 |
Modular order for the development of mechanical structures for electronic equipment practices - Part 2: Sectional specification - Interface co-ordination dimensions for the 25 mm equipment practice - Section 2: Detail specification - Dimensions for subrac 发展中的电子设备构体机械结构模数序列 第2-2部分:分规范 25mm设备构体的接口协调尺寸 详细规范 插箱、机箱、背板、面板和插件的尺寸 |
China National Standards al |
English PDF |
GB/T 17937-2009 |
aluminium-clad steel wires for electrical purposes 电工用铝包钢线 |
China National Standards al |
English PDF |
GB/T 17363.1-2009 |
Nondestructive mensuration of gold content in the gold products - Part 1: Method of electron probe microanalysis 黄金制品金含量无损测定方法 第1部分:电子探针微分析法 |
China National Standards al |
English PDF |
GB/T 17048-2009 |
Hard-drawn aluminium wire for overhead line conductors 架空绞线用硬铝线 |
China National Standards al |
English PDF |
GB/T 12970.4-2009 |
Flexilbe copper stranded conductors for electrical purposes - Part 4: Copper wires for electric brush 电工软铜绞线 第4部分:铜电刷线 |
China National Standards al |
English PDF |
GB/T 12970.3-2009 |
Flexible copper stranded conductors for electrical purposes - Part 3: Flexible copper wire for antenna 电工软铜绞线 第3部分:软铜天线 |
China National Standards al |
English PDF |
GB/T 12970.2-2009 |
Flexible copper stranded conductors for electrical purposes - Part 2: Flexible copper stranded conductors 电工软铜绞线 第2部分:软铜绞线 |
China National Standards al |
English PDF |
GB/T 12970.1-2009 |
Flexible copper stranded conductors for electrical purposes - Part 1: General requirements 电工软铜绞线 第1部分:一般规定 |
China National Standards al |
English PDF |
GB/T 11016.1-2009 |
Plastic or rubber insulated telephone cords - Part 1: General 塑料绝缘和橡皮绝缘电话软线 第1部分:一般规定 |
China National Standards al |
English PDF |
GB/T 8190.11-2009 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transient test conditions 往复式内燃机 排放测量 第11部分:非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量 |
China National Standards al |
English PDF |
GB/T 6809.7-2009 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 7: Governing systems 往复式内燃机 零部件和系统术语 第7部分:调节系统 |
China National Standards al |
English PDF |
GB/T 6809.6-2009 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 6: Lubricating systems 往复式内燃机 零部件和系统术语 第6部分:润滑系统 |
China National Standards al |
English PDF |
GB/T 6809.1-2009 |
Reciprocating internal combustion engines - Vocabulary of components and systems - Part 1: Structure and external covers 往复式内燃机 零部件和系统术语 第1部分:固定件及外部罩盖 |
China National Standards al |
English PDF |
GB/T 4759-2009 |
Exhaust silencers for internal combustion engines - Measurement procedure 内燃机排气消声器 测量方法 |
China National Standards al |
English PDF |
GB/T 23342-2009 |
Reciprocal internal combustion engines - Recoil starting equipment - General safety requirements 往复式内燃机 回弹式绳索起动装置 基本安全要求 |
China National Standards al |
English PDF |
GB/T 23341.1-2009 |
Turbochargers - Part 1: General requirements 涡轮增压器 第1部分:一般技术条件 |
China National Standards al |
English PDF |
GB/T 23340-2009 |
Internal combustion engines - Connecting-rods - Specification 内燃机 连杆 技术条件 |
China National Standards al |
English PDF |
GB/T 23339-2009 |
Internal combustion engines - Crankshafts - Specification 内燃机 曲轴 技术条件 |
China National Standards al |
English PDF |
GB/T 23338-2009 |
Internal combustion engines - Charge air coolers - Specification 内燃机 增压空气冷却器 技术条件 |
China National Standards al |
English PDF |
GB/T 23337-2009 |
Internal combustion engines - Intake and exhaust valves - Specification 内燃机 进、排气门 技术条件 |
China National Standards al |
English PDF |
GB/T 17804-2009 |
Reciprocating internal combustion engines - Graphical symbols 往复式内燃机 图形符号 |
China National Standards al |
English PDF |
GB 50493-2009 |
Specification for design of combustible gas and toxic gas detection and alarm for petrochemical industry 石油化工可燃气体和有毒气体检测报警设计规范 |
China National Standards al |
English PDF |
GB 50489-2009 |
Code for Design of General Plot Plan and Transportation of Chemical Industrial Enterprises 化工企业总图运输设计规范 |
China National Standards al |
English PDF |
GB 50483-2009 |
Code for design of environmental protectin of chemical industry projects 化工建设项目环境保护设计规范 |
China National Standards al |
English PDF |
GB 50273-2009 |
Code for construction and acceptance of boiler installation engineering 锅炉安装工程施工及验收规范 |
China National Standards al |
English PDF |
GB 50272-2009 |
Code for construction and acceptance of forging-press equipment installation engineering 锻压设备安装工程施工及验收规范 |
China National Standards al |
English PDF |
GB 50231-2009 |
General code for construction and acceptance of mechanical equipment installation engineering 机械设备安装工程施工及验收通用规范 |
China National Standards al |
English PDF |
GB 50495-2009 |
Technical code for solar heating system 太阳能供热采暖工程技术规范 |
China National Standards al |
English PDF |
GB/T 786.1-2009 |
Fluid power systems and components - Graphic symbols and circuit diagrams - Part 1: Graphic symbols for conventional use and data-processing applications 流体传动系统及元件图形符号和回路图 第1部分:用于常规用途和数据处理的图形符号 |
China National Standards al |
English PDF |
GB/T 6062-2009 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Nominal characteristic of contact(stylus) instruments 产品几何技术规范(GPS) 表面结构 轮廓法 接触(触针)式仪器的标称特性 |
China National Standards al |
English PDF |
GB/T 4249-2009 |
Geometrical product specifications(GPS) - Tolerancing principle 产品几何技术规范(GPS) 公差原则 |
China National Standards al |
English PDF |
GB/T 3505-2009 |
Geometrical product specifications (GPS) - Surface texture: Profile method - Terms, definitions and surface texture parameters 产品几何技术规范(GPS) 表面结构 轮廓法 术语、定义及表面结构参数 |
China National Standards al |
English PDF |
GB/T 3177-2009 |
Geometrical product specifications (GPS) - Inspection of plain workpiece sizes 产品几何技术规范(GPS) 光滑工件尺寸的检验 |
China National Standards al |
English PDF |
GB/T 23935-2009 |
Design of cylindrical helical springs 圆柱螺旋弹簧设计计算 |
China National Standards al |
English PDF |
GB/T 23934-2009 |
Hot coiled helical compression springs - Technical specifications 热卷圆柱螺旋压缩弹簧 技术条件 |
China National Standards al |
English PDF |
GB/T 23282-2009 |
Metal forming machinery - Noise measurement method of sound power levels 锻压机械噪声声功率级测量方法 |
China National Standards al |
English PDF |
GB/T 23281-2009 |
Metal forming machinery -noise measurement method of sound pressure levels 锻压机械噪声声压级测量方法 |
China National Standards al |
English PDF |
GB/T 23280-2009 |
Open front mechanical power presses - Testing of the accuracy 开式压力机 精度 |
China National Standards al |
English PDF |
GB/T 23253-2009 |
Hydraulic fluid power - Electrically controlled hydraulic pumps - Test methods to determine performance characteristics 液压传动 电控液压泵 性能试验方法 |
China National Standards al |
English PDF |
GB/T 23252-2009 |
Pneumatic fluid power - Cylinders - Final examination and acceptance criteria 气缸 成品检验及验收 |
China National Standards al |
English PDF |
GB/T 2089-2009 |
Cylindrical coiled compression spring dimensions and parameters 普通圆柱螺旋压缩弹簧尺寸及参数(两端圈并紧磨平或制扁) |
China National Standards al |
English PDF |
GB/T 2088-2009 |
Cylindrical coiled tension spring dimensions and parameters 普通圆柱螺旋拉伸弹簧尺寸及参数 |
China National Standards al |
English PDF |
GB/T 18779.3-2009 |
Geometrical product specifications (GPS) - Inspection by measurement of workpieces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements 产品几何技术规范(GPS) 工件与测量设备的测量检验 第3部分:关于对测量不确定度的表述达成共识的指南 |
China National Standards al |
English PDF |
GB/T 1801-2009 |
Geometrical product specifications (GPS) - Limits and fits - Selection of tolerance zones and fits 产品几何技术规范(GPS) 极限与配合 公差带和配合的选择 |
China National Standards al |
English PDF |
GB/T 1800.2-2009 |
Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts 产品几何技术规范(GPS) 极限与配合 第2部分:标准公差等级和孔、轴极限偏差表 |
China National Standards al |
English PDF |
GB/T 1800.1-2009 |
Geometrical product specifications (GPS) - Limits and fits - Part 1: Bases of tolerances, deviations and fits 产品几何技术规范(GPS) 极限与配合 第1部分:公差、偏差和配合的基础 |
China National Standards al |
English PDF |
GB/T 16947-2009 |
Helical spring fatigue testing standard 螺旋弹簧疲劳试验规范 |
China National Standards al |
English PDF |
GB/T 16747-2009 |
Geometrical product specification (GPS) - Surface texture:Profile method - Surface waviness terms 产品几何技术规范(GPS) 表面结构 轮廓法 表面波纹度词汇 |
China National Standards al |
English PDF |
GB/T 16671-2009 |
Geometrical product specifications(GPS) - Geometrical tolerancing - Maximum material requirement(MMR),least material requirement(LMR) and reciprocity requirement(RPR) 产品几何技术规范(GPS) 几何公差 最大实体要求、最小实体要求和可逆要求 |
China National Standards al |
English PDF |
GB/T 14495-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pieces 产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块 |
China National Standards al |
English PDF |
GB/T 13828-2009 |
Stranded wire cylindrical helical springs 多股圆柱螺旋弹簧 |
China National Standards al |
English PDF |
GB/T 1358-2009 |
Cylindrical helical spring seriate sizes 圆柱螺旋弹簧尺寸系列 |
China National Standards al |
English PDF |
GB/T 12471-2009 |
Geometrical product specifications(GPS) - Wooden part - Limit and fit 产品几何技术规范(GPS) 木制件 极限与配合 |
China National Standards al |
English PDF |
GB/T 1239.3-2009 |
Cold coiled helical springs technical specifiations - Part 3: Torsion spring 冷卷圆柱螺旋弹簧技术条件 第3部分:扭转弹簧 |
China National Standards al |
English PDF |
Find out:31723Items | To Page of: First -Previous-Next -Last | [213] [214] [215] [216] [217] [218] [219] |