Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 9364.4-2016 |
Miniature fuses—Part 4: Universal modular fuse-links (UMF)—Through-hole and surface mount types 小型熔断器 第4部分：通用模件熔断体(UMF) 穿孔式和表面贴装式 |
China National Standards mount |
 English PDF |
| GB/T 2775-2016 |
Capacitors and resistors for use in electronic equipment—Preferred dimensions of shaft ends, bushes and for the mounting of single-hole, bush-mounted, shaft-operated electronic components 电子设备用电容器和电阻器 轴端、轴套和单孔轴套安装及轴控电子元件的优选尺寸 |
China National Standards mount |
English PDF |
| GB/T 1592.3-2016 |
Agricultural tractors—Rear-mounted power take-off types 1,2 ,3 and 4—Part 3: Main PTO dimensions and spline dimensions, location of PTO 农业拖拉机 后置动力输出轴 1、2、3和4型 第3部分：动力输出轴尺寸和花键尺寸、动力输出轴位置 |
China National Standards mount |
English PDF |
| GB/T 1592.2-2016 |
Agricultural tractors—Rear-mounted power take-off types 1,2,3 and 4—Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第2部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards mount |
English PDF |
| GB/T 1592.1-2016 |
Agricultural tractors—Rear-mounted power take-off types 1, 2, 3 and 4—Part 1: General specifications，safety requirements，dimensions for master shield and clearance zone 农业拖拉机 后置动力输出轴 1、2、3和4型 第1部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards mount |
English PDF |
| GB/T 15157.2-2015 |
Connectors for frequencies below 3 MHz for use with printed boards—Part 2：Detail specification for two-part connectors with assessed quality，for printed boards，for basic grid of 2.54 mm with common mounting features 印制板用频率低于3 MHz的连接器 第2部分：有质量评定的具有通用安装特征基本网格2.54 mm的印制板用两件式连接器详细规范 |
China National Standards mount |
English PDF |
| GB/T 32337-2015 |
Pneumatic fluid power—mounting interface surfaces of 3/2 solenoid valves 气动 二位三通电磁阀安装面 |
China National Standards mount |
English PDF |
| GB/T 32336-2015 |
Pneumatic fluid power—Basic,mounting and accessories dimensions of cylinders with detachable mountings, bores from 32mm to 320mm 气动 带可拆卸安装件的缸径32mm至320mm的气缸基本尺寸、安装尺寸和附件尺寸 |
China National Standards mount |
English PDF |
| GB/T 21956.3-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 3：Static testing method of rear mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第3部分：后置式静态试验方法 |
China National Standards mount |
English PDF |
| GB/T 21956.2-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 2：Dynamic testing method of front mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第2部分：前置式动态试验方法 |
China National Standards mount |
English PDF |
| GB/T 21956.1-2015 |
Protective structure strength on narrow-track wheeled agricultural and forestry tractors—Testing method and acceptance condition—Part 1：Static testing method of front mounted ROPS 农林用窄轮距轮式拖拉机防护装置强度 试验方法和验收条件 第1部分：前置式静态试验方法 |
China National Standards mount |
English PDF |
| GB/T 21155-2015 |
Earth-moving machinery—Machine-mounted audible travel alarms and forward horns—Test methods and performance criteria 土方机械 行车声响报警装置和前方喇叭 试验方法和性能准则 |
China National Standards mount |
English PDF |
| GB/T 31849-2015 |
Film mounted motor vehicle glass 汽车贴膜玻璃 |
China National Standards mount |
English PDF |
| GB/T 31848-2015 |
Film mounted motor vehicle glass—Requirements for mounting 汽车贴膜玻璃 贴膜要求 |
China National Standards mount |
English PDF |
| GB/T 9546.8-2015 |
Fixed resistors for use in electronic equipment—Part 8: Sectional specification—Fixed surface mount resistors 电子设备用固定电阻器 第8部分：分规范 表面安装固定电阻器 |
China National Standards mount |
English PDF |
| GB/T 9546.801-2015 |
Fixed resistors for use in electronic equipment—Part 8-1: Blank detail specification—Fixed surface mount resistors categorized as level G—Assessment level EZ 电子设备用固定电阻器 第8-1部分：空白详细规范 G等级的表面安装固定电阻器 评定水平EZ |
China National Standards mount |
English PDF |
| GB/T 6346.3-2015 |
Fixed capacitors for use in electronic equipment—Part 3: Sectional specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte 电子设备用固定电容器 第3部分：分规范 表面安装MnO2固体电解质钽固定电容器 |
China National Standards mount |
English PDF |
| GB/T 6346.301-2015 |
Fixed capacitors for use in electronic equipment—Part 3-1: Blank detail specification—Surface mount fixed tantalum electrolytic capacitors with manganese dioxide solid electrolyte—Assessment level EZ 电子设备用固定电容器 第3-1部分：空白详细规范 表面安装MnO2固体电解质钽固定电容器 评定水平EZ |
China National Standards mount |
English PDF |
| GB/T 31706-2015 |
mountain tourist attraction cleaning service specification 山岳型旅游景区清洁服务规范 |
China National Standards mount |
English PDF |
| GB/T 1593-2015 |
Agricultural Wheeled tractor—Rear-mounted three-point linkage—Categories 0、1N、1、2N、2、3N、3、4N and 4 农业轮式拖拉机 后置式三点悬挂装置 0、1N、1、2N、2、3N、3、4N和4类 |
China National Standards mount |
English PDF |
| GB/T 10916.2-2015 |
Agricultural wheeled tractors—Front-mounted equipment—Part 2：Stationary equipment connection 农业轮式拖拉机 前置装置 第2部分：固定设备的连接 |
China National Standards mount |
English PDF |
| GB/T 31262-2014 |
General technical requirements for Ku band vehicle mounted-satellite communication earth station under stationary using Ku频段静止中使用的车载卫星通信地球站通用技术要求 |
China National Standards mount |
English PDF |
| GB/T 30173.2-2014 |
Mechanical vibration and shock―Resilient mounting systems―Part 2: Technical information to be exchanged for the application of vibration isolation associated with railway systems 机械振动与冲击 弹性安装系统 第2部分：轨道交通系统隔振应用需交换的技术信息 |
China National Standards mount |
English PDF |
| GB/T 30815-2014 |
Surface chemical analysis―Guidelines for preparation and mounting of specimens for analysis 表面化学分析 分析样品的制备和安装方法指南 |
China National Standards mount |
English PDF |
| GB 20888.2-2013 |
Machinery for forestry―Safety requirements and testing for pole-mounted powered pruners―Part 2: Machines for use with back-pack power source 林业机械 杆式动力修枝锯安全要求和试验 第2部分：背负式动力修枝锯 |
China National Standards mount |
English PDF |
| GB 20888.1-2013 |
Machinery for forestry―Safety requirements and testing for pole-mounted powered pruners―Part 1: Machines fitted with an integral combustion engine 林业机械 杆式动力修枝锯安全要求和试验 第1部分：侧挂式动力修枝锯 |
China National Standards mount |
English PDF |
| GB 19079.31-2013 |
Operation conditions and technical requirements for gymnasium and playground―Part 31: mountaineering place 体育场所开放条件与技术要求 第31部分：高山探险场所 |
China National Standards mount |
English PDF |
| GB/T 16467-2013 |
Fixed capacitors for use in electronic equipment―Part 19-1: Blank detail specification—Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c.capacitors―Assessment level EZ 电子设备用固定电容器 第19-1部分：空白详细规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 评定水平EZ |
China National Standards mount |
English PDF |
| GB/T 15448-2013 |
Fixed capacitors for use in electronic equipment—Part 19: Sectional specification—Fixed metallized polyethylene-terephthalate film dielectric surface mount d.c.capacitors 电子设备用固定电容器 第19部分:分规范 表面安装金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
China National Standards mount |
English PDF |
| GB/T 30173.1-2013 |
Mechanical vibration and shock—Resilient mounting systems—Part 1: Technical information to be exchanged for the application of isolation systems 机械振动与冲击 弹性安装系统 第1部分：用于交换的隔振系统的技术信息 |
China National Standards mount |
English PDF |
| GB 19079.30-2013 |
Operation conditions and technical requirements for gymnasium and playground - Part 30: mountain outdoor place 体育场所开放条件与技术要求 第30部分：山地户外场所 |
China National Standards mount |
English PDF |
| GB 19239-2013 |
mounting requirements of special equipment for gas vehicle 燃气汽车专用装置的安装要求 |
China National Standards mount |
English PDF |
| GB 29693-2013 |
National Food Safety Standard - Determination of Residual Halofuginone Amount in Animal Food - High Performance Liquid Chromatography 食品安全国家标准 动物性食品中常山酮残留量的测定 高效液相色谱法 |
China National Standards mount |
English PDF |
| GB/T 29010-2012 |
Building construction machinery and equipment - Crawler mounted recycling equipment for construction waste - Terminology and commercial specifications 建筑施工机械与设备 履带式建设废弃物处理机械 术语和商业规格 |
China National Standards mount |
English PDF |
| GB/T 28961-2012 |
Automotive diesel - Two-stage fuel filters for Compression-ignition engines - mounting and connecting dimensions 汽车柴油机 双级燃油滤清器 安装和连接尺寸 |
China National Standards mount |
English PDF |
| GB/T 28960-2012 |
Automotive diesel - Heads for fuel filters with horizontal flange - mounting and connecting dimensions 汽车柴油机 具有水平安装面的旋装式燃油滤清器滤座 安装和连接尺寸 |
China National Standards mount |
English PDF |
| GB/T 28959-2012 |
Automotive diesel - Heads for fuel filters with vertical flange- mounting and connecting dimensions 汽车柴油机 具有垂直安装面的燃油滤清器滤座 安装和连接尺寸 |
China National Standards mount |
English PDF |
| GB/T 28953-2012 |
Automotive diesel - Spin-on fuel filters for diesel engines - mounting and connecting dimensions 汽车柴油机 旋装式燃油滤清器 安装和连接尺寸 |
China National Standards mount |
English PDF |
| GB/T 29400-2012 |
Determination of microamount of inorganic anions in fertilizers by ion chromatography 化肥中微量阴离子的测定 离子色谱法 |
China National Standards mount |
English PDF |
| GB/T 28781-2012 |
Pneumatic fluid power Compact cylinders, bores form 20mm to 100mm - Basic dimensions and mounting dimensions 气动 缸内径20mm至100mm的紧凑型气缸 基本尺寸、安装尺寸 |
China National Standards mount |
English PDF |
| GB/T 17207-2012 |
Fixed capacitors for use in electronic equipment - Part 18-1: Blank detail specification - Fixed aluminium electrolytic surface mount - Capacitors with solid(MnO2) electrolyte - Assessment level EZ 电子设备用固定电容器 第18-1部分：空白详细规范 表面安装固体(MnO2)电解质铝固定电容器 评定水平EZ |
China National Standards mount |
English PDF |
| GB/T 28446.1-2012 |
Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close 手持和身体佩戴使用的无线通信设备对人体的电磁照射 人体模型、仪器和规程 第1部分：靠近耳边使用的手持式无线通信设备的SAR评估规程（频率范围300MHz～3GHz） |
China National Standards mount |
English PDF |
| GB 567.3-2012 |
Bursting disc safety devices － Part 3: Classification and mounting dimensions 爆破片安全装置 第3部分：分类及安装尺寸 |
China National Standards mount |
English PDF |
| GB/T 28191-2011 |
Surface active agents - Detergents - Anionic active matter stable to acid hydrolysis - Determination of trace amounts 表面活性剂 洗涤剂 对酸解稳定的阴离子活性物 痕量的测定 |
China National Standards mount |
English PDF |
| GB/T 28162.3-2011 |
Packaging of components for automatic handing - Part 3: Packaging of surface mount components on continuous tapes 自动操作用元器件的包装 第3部分：表面安装元器件在连续带上的包装 |
China National Standards mount |
English PDF |
| GB/T 26142.2-2010 |
Pneumatic fluid power - Five-port directional control valves,sizes 18mm and 26mm - Part 2: mounting interface surfaces with optional electrical connector 气动五通方向控制阀 规格18mm和26mm 第2部分:带可选电气接头的安装面 |
China National Standards mount |
English PDF |
| GB/T 26142.1-2010 |
Pneumatic fluid power - Five-port directional control valves,sizes 18mm and 26mm - Part 1: mounting interface surfaces without electrical connector 气动五通方向控制阀 规格18mm和26mm 第1部分：不带电气接头的安装面 |
China National Standards mount |
English PDF |
| GB/T 16709.2-2010 |
Vacuum technology- mounting dimensions of pipeline fittings Part 2: Knife-edge flange type 真空技术 管路配件的装配尺寸 第2部分：刀口法兰型 |
China National Standards mount |
English PDF |
| GB/T 16709.1-2010 |
Vacuum technology - mounting dimensions of pipeline fittings - Part 1: Non knife-edge flange type 真空技术 管路配件的装配尺寸 第1部分：非刀口法兰型 |
China National Standards mount |
English PDF |
| GB/T 25147-2010 |
Test method of metal corrosion amount and corrosion rate of chemical cleaning for industrial equipment - Gravimetric method 工业设备化学清洗中金属腐蚀率及腐蚀总量的测试方法 重量法 |
China National Standards mount |
English PDF |
| GB/T 24678.2-2009 |
Equipment for crop protection - The stretcher-mounted power sprayer with wide-swath and long-range 植物保护机械 担架式宽幅远射程喷雾机 |
China National Standards mount |
English PDF |
| GB/T 2779-2009 |
Tractor’s connective equipment for trailers - Types dimensions and mounting requirement 拖拉机拖挂装置 型式尺寸和安装要求 |
China National Standards mount |
English PDF |
| GB/T 22264.8-2009 |
mounted digital display electric measuring instruments - Part 8: Recommended test methods 安装式数字显示电测量仪表 第8部分：推荐的试验方法 |
China National Standards mount |
English PDF |
| GB/T 22264.6-2009 |
mounted digital display electric measuring instruments - Part 6: Special requirements for insulation resistance meters 安装式数字显示电测量仪表 第6部分：绝缘电阻表的特殊要求 |
China National Standards mount |
English PDF |
| GB/T 24377-2009 |
Textile machinery and accessories - Metallic card clothing - Definitions of dimensions, types and mounting 纺织机械与附件 金属针布 尺寸定义、齿型和包卷 |
China National Standards mount |
English PDF |
| GB/T 3209-2009 |
Method for determination the amount of distillation residual of benzene－type product 苯类产品蒸发残留量的测定方法 |
China National Standards mount |
English PDF |
| GB/T 23928-2009 |
Low-speed goods vehicles - Front axle mounting dimensions 低速货车 前轴连接尺寸 |
China National Standards mount |
English PDF |
| GB/T 23537-2009 |
Superabrasives - Limit deviations and run-out tolerances for grinding wheels with diamond or cubic boron nitride and mounted points 超硬磨料制品 金刚石或立方氮化硼砂轮和磨头 极限偏差和圆跳动公差 |
China National Standards mount |
English PDF |
| GB/T 21956.4-2009 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 4: Dynamic testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第4部分：后置式动态试验方法 |
China National Standards mount |
English PDF |
| GB/T 23268.1-2009 |
Specifications for protective equipments for sports - Part 1: Dynamic mountaineering ropes 运动保护装备要求 第1部分：登山动力绳 |
China National Standards mount |
English PDF |
| GB 7000.212-2008 |
Luminaires - Part 2-12: Particular requirements - Mains socket-outlet mounted nightlights 灯具 第2-12部分：特殊要求 电源插座安装的夜灯 |
China National Standards mount |
English PDF |
| GB/T 2423.60-2008 |
Environmental testing - Part 2: Tests - Test U: Robustness of terminations and integral mounting devices 电工电子产品环境试验 第2部分：试验方法 试验U：引出端及整体安装件强度 |
China National Standards mount |
English PDF |
| GB/T 22264.7-2008 |
mounted digital display electric measuring instruments - Part 7: Special requirements for multi-function instruments 安装式数字显示电测量仪表 第7部分：多功能仪表的特殊要求 |
China National Standards mount |
English PDF |
| GB/T 22264.5-2008 |
mounted digital display electric measuring instruments - Part 5: Special requirements for phase meters and power factor meters 安装式数字显示电测量仪表 第5部分：相位表和功率因数表的特殊要求 |
China National Standards mount |
English PDF |
| GB/T 22264.4-2008 |
mounted digital display electric measuring instruments - Part 4: Special requirements for frequency meters 安装式数字显示电测量仪表 第4部分：频率表的特殊要求 |
China National Standards mount |
English PDF |
| GB/T 22264.3-2008 |
mounted digital display electric measuring instruments - Part 3: Special requirements for wattmeters and varmeters 安装式数字显示电测量仪表 第3部分：功率表和无功功率表的特殊要求 |
China National Standards mount |
English PDF |
| GB/T 22264.2-2008 |
mounted digital display electric measuring instruments - Part 2: Special requirements for ammeters and voltmeters 安装式数字显示电测量仪表 第2部分：电流表和电压表的特殊要求 |
China National Standards mount |
English PDF |
| GB/T 22483-2008 |
Codes of mountain range and peak names of China 中国山脉山峰名称代码 |
China National Standards mount |
English PDF |
| GB/T 22436-2008 |
Series of mounting dimensions for wheel hub of motorcycles and mopeds 摩托车和轻便摩托车轮毂安装尺寸系列 |
China National Standards mount |
English PDF |
| GB/T 22264.1-2008 |
mounted digital display electric measuring instruments - Part1: Definitions and general requirements common to all parts 安装式数字显示电测量仪表 第1部分：定义和通用要求 |
China National Standards mount |
English PDF |
| GB/T 22319.8-2008 |
Measurement of quartz crystal unit parameters - Part 8: Test fixture for surface mounted quartz crystal units 石英晶体元件参数的测量 第8部分：表面贴装石英晶体元件用测量夹具 |
China National Standards mount |
English PDF |
| GB/T 19504-2008 |
Product of geographical indication - Wine in Helan mountain east region 地理标志产品 贺兰山东麓葡萄酒 |
China National Standards mount |
English PDF |
| GB/T 18957-2008 |
Product of geographical indication - Dongting (mountain) biluochun tea 地理标志产品 洞庭（山）碧螺春茶 |
China National Standards mount |
English PDF |
| GB/T 5184-2008 |
Fork-lift trucks - Hook-on type fork arms and fork arm carriages - mounting dimensions 叉车 挂钩型货叉和货叉架 安装尺寸 |
China National Standards mount |
English PDF |
| GB/T 1592.3-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 3: Main PTO dimensions and spline dimensions, location of PTO 农业拖拉机后置动力输出轴1、2和3型 第3部分：动力输出轴尺寸和花键尺寸、动力输出轴位置 |
China National Standards mount |
English PDF |
| GB/T 1592.2-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 2: Narrow-track tractors, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 2 部分：窄轮距拖拉机防护罩尺寸和空隙范围 |
China National Standards mount |
English PDF |
| GB/T 1592.1-2008 |
Agricultural tractors - Rear- mounted power take-off types 1,2 and 3 - Part 1: General specifications, safety requirements, dimensions for master shield and clearance zone 农业拖拉机后置动力输出轴 1、2和 3 型 第 1 部分：通用要求、安全要求、防护罩尺寸和空隙范围 |
China National Standards mount |
English PDF |
| GB/T 22162-2008 |
Dimensions of panel areas and cut-outs for panel and rack-mounted industrial-process measurement and control instruments 盘装和架装工业过程测量和控制仪表的盘面和开孔尺寸 |
China National Standards mount |
English PDF |
| GB/T 18380.36-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 36:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category D 电缆和光缆在火焰条件下的燃烧试验 第36部分：垂直安装的成束电线电缆火焰垂直蔓延试验 D类 |
China National Standards mount |
English PDF |
| GB/T 18380.35-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 35:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category C 电缆和光缆在火焰条件下的燃烧试验 第35部分：垂直安装的成束电线电缆火焰垂直蔓延试验 C类 |
China National Standards mount |
English PDF |
| GB/T 18380.34-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 34:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category B 电缆和光缆在火焰条件下的燃烧试验 第34部分：垂直安装的成束电线电缆火焰垂直蔓延试验 B类 |
China National Standards mount |
English PDF |
| GB/T 18380.33-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 33:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A 电缆和光缆在火焰条件下的燃烧试验 第33部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A类 |
China National Standards mount |
English PDF |
| GB/T 18380.32-2008 |
Tests on electric and optical fibre cables under fire conditions - Part 32:Test for vertical flame spread of vertically-mounted bunched wires or cables - Category A F/R 电缆和光缆在火焰条件下的燃烧试验 第32部分：垂直安装的成束电线电缆火焰垂直蔓延试验 A F/R类 |
China National Standards mount |
English PDF |
| GB/T 18380.31-2008 |
Test on electric and optical fibre cables under fire conditions - Part 31:Test for vertical flame spread of vertically-mounted bunched wires or cables - Apparatus 电缆和光缆在火焰条件下的燃烧试验 第31部分：垂直安装的成束电线电缆火焰垂直蔓延试验 试验装置 |
China National Standards mount |
English PDF |
| GB/T 8102-2008 |
Single rod air cylinders, bores from 8mm to 25mm - mounting dimensions 缸内径8mm～25mm的单杆气缸安装尺寸 |
China National Standards mount |
English PDF |
| GB/T 7940.2-2008 |
Pneumatic fluid power - Five-port directional control valves - Part 2: mounting interface surfaces with optional electrical connector 气动 五气口方向控制阀 第2部分：带可选电气接头的安装面 |
China National Standards mount |
English PDF |
| GB/T 7940.1-2008 |
Pneumatic fluid power - Five-port directional control valves - Part 1: mounting interface surfaces without electrical connector 气动 五气口方向控制阀 第1部分：不带电气接头的安装面 |
China National Standards mount |
English PDF |
| GB/T 22047-2008 |
Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved 土壤中塑料材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量或测定释放的二氧化碳的方法 |
China National Standards mount |
English PDF |
| GB/T 7121.1-2008 |
The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分：后置式静态试验方法 |
China National Standards mount |
English PDF |
| GB/T 21956.3-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3：Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分：后置式静态试验方法 |
China National Standards mount |
English PDF |
| GB/T 21956.2-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2：Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分：前置式动态试验方法 |
China National Standards mount |
English PDF |
| GB/T 21956.1-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1：Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分：前置式静态试验方法 |
China National Standards mount |
English PDF |
| GB/T 21936-2008 |
Earth-moving machinery - Machine-mounted retrieval device - Performance requirements 土方机械 安装在机器上的拖拽装置 性能要求 |
China National Standards mount |
English PDF |
| GB/T 2423.43-2008 |
Environmental testing for electric and electronic products - Part 2: Test methods - mounting of specimens for vibration, impact and similar dynamic tests 电工电子产品环境试验 第2部分：试验方法 振动、冲击和类似动力学试验样品的安装 |
China National Standards mount |
English PDF |
| GB/T 997-2008 |
Rotating electrical machines - Classification of types of construction ，mounting arrangements and terminal box position for(IM Code) 旋转电机结构型式、安装型式及接线盒位置的分类（IM代码） |
China National Standards mount |
English PDF |
| GB/T 7376-2008 |
Determination of micro-amounts of water in industrial Fluorinated alkane 工业用氟代烷烃中微量水分的测定 |
China National Standards mount |
English PDF |
| GB/T 2514-2008 |
Hydraulic fluid power - Four-port directional control valves - mounting surfaces 液压传动 四油口方向控制阀安装面 |
China National Standards mount |
English PDF |
| GB/T 9465-2008 |
Vehicle-mounted mobile elevating work platform 高空作业车 |
China National Standards mount |
English PDF |
| GB/T 2780-2008 |
Drawbars for agricultural tractors － Types dimensionsand mounting requirements 农业拖拉机 牵引装置型式尺寸和安装要求 |
China National Standards mount |
English PDF |
| GB/T 21160-2007 |
Agricultural trailers - Balanced and semi-mounted trailers - Determination of payload, vertical static load and axle load 农用挂车 全挂车和半挂车有效载荷、垂直静态载荷和轴载荷的测定 |
China National Standards mount |
English PDF |
| Find out:255Items | To Page of: First -Previous-Next -Last | 1 2 3 |
+86-755-25831330
