GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 7253-2005 |
Insulators for overhead lines with a nominal voltage above 1000V -- Ceramic or glass insulator units for a.c.systems -- Charateristics of insulator units of the cap and pin type 标称电压高于1000V的架空线路绝缘子 交流系统用瓷或玻璃绝缘子元件 盘形悬式绝缘子元件的特性 |
China National Standards of |
English PDF |
GB/T 5170.18-2005 |
Inspection methods for basic parameters of Environmental testing equipments for electric and electronic products -- Composite temperature/humidity cyclic testing equipments 电工电子产品环境试验设备基本参数检定方法 温度/ 湿度组合循环试验设备 |
China National Standards of |
English PDF |
GB/T 20043-2005 |
Field Acceptance Test to Determine the Hydraulic Performance of Hydraulic Turbine,storage pumps and pump-turbines 水轮机、蓄能泵和水泵水轮机水力性能现场验收试验规程 |
China National Standards of |
English PDF |
GB/T 10762-2005 |
Method of mass measurement for industrial and mining electric locomotive 工矿电机车重量测定方法 |
China National Standards of |
English PDF |
GB/T 6404.2-2005 |
Acceptance code for gear units-Part2:Determination of mechanical vibrations of gear units during acceptance testing 齿轮装置的验收规范 第2部分:验收试验中齿轮装置机械振动的测定 |
China National Standards of |
English PDF |
GB/T 6826-2005 |
Serial type of mineral processing equipment 洗选设备 系列型谱 |
China National Standards of |
English PDF |
GB/T 2353-2005 |
Dimension series and identification code for mounting flanges and shaft ends of hydraulic pumps and motors 液压泵及马达的安装法兰和轴伸的尺寸系列及标注代号 |
China National Standards of |
English PDF |
GB/T 19956.2-2005 |
Positive-displacement cacuum pumps-Measurement of performance characteristics Part2:Measurement of ultimate pressure 容积真空泵性能测量方法 第2部分:极限压力的测量 |
China National Standards of |
English PDF |
GB/T 19956.1-2005 |
Positive-displacement cacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 容积真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
China National Standards of |
English PDF |
GB/T 19955.2-2005 |
Vapour vacuum pumps-Measurement of performance characteristics Part2:Measurement of critical backing pressure 蒸汽流真空泵性能测量方法 第2部分:临界前级压力的测量 |
China National Standards of |
English PDF |
GB/T 19955.1-2005 |
Vapour vacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 蒸汽流真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
China National Standards of |
English PDF |
GB/T 19943-2005 |
Non-destructive testing-Radiographic examination of metallic materials by X-and gamma-rays-Basic rules 无损检测 金属材料X和伽玛射线 照相检测 基本规则 |
China National Standards of |
English PDF |
GB/T 19939-2005 |
Technical Requirements for Crid Connection of PV System 光伏系统并网技术要求 |
China National Standards of |
English PDF |
GB/T 19936.1-2005 |
Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分:油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards of |
English PDF |
GB/T 19935-2005 |
Worm gears-Geometry of worms-Name plates for worm gear units,centre distances,information to be supplied to gear manufacturer by the purchaser 蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数 |
China National Standards of |
English PDF |
GB/T 19934.1-2005 |
Hydraulic fluid power-Fatigue pressure testing of metal pressure-containing envelopes-Part 1:Test method 液压传动 金属承压壳体的疲劳压力试验 第1部分:试验方法 |
China National Standards of |
English PDF |
GB/T 19928-2005 |
Earth-moving machinery-Lift capacity of pipelayers and wheeled tractors or loaders equipped with side boom 土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量 |
China National Standards of |
English PDF |
GB/T 19927-2005 |
Cranked-link drag chains of welded construction,attachments and sprockets 曳引用焊接结构弯板链、附件和链轮 |
China National Standards of |
English PDF |
GB/T 19926-2005 |
Hydraulic fluid power-Gas-loaded accumulators-Dimensions of gas port 液压传动 充气式蓄能器 气口尺寸 |
China National Standards of |
English PDF |
GB/T 19925-2005 |
Hydraulic fluid power-Gas-loaded Accumulators with separator-Selection of preferred hydraulic port 液压传动 隔离式充气蓄能器 优先选择的液压油口 |
China National Standards of |
English PDF |
GB/T 19924-2005 |
Mobile cranes-Determination of stability 流动式起重机 稳定性的确定 |
China National Standards of |
English PDF |
GB/T 19921-2005 |
Test method of particles on silicon wafer surfaces 硅抛光片表面颗粒测试方法 |
China National Standards of |
English PDF |
GB/T 15390-2005 |
Cranked-link mill chains of welded construction,attachments and sprockets 工程用焊接结构弯板链、附件和链轮 |
China National Standards of |
English PDF |
GB/T 12225-2005 |
General purpose industrial valves-Specification of copper alloy castings 通用阀门 铜合金铸件技术条件 |
China National Standards of |
English PDF |
GB/T 10913-2005 |
Earth-woving machinery-Determination of ground speed 土方机械 行驶速度测定 |
China National Standards of |
English PDF |
GB/T 10598.2-2005 |
Industrial test method of open-cut mine rotary blast hole drill 露天矿用牙轮钻机和旋转钻机 工业试验方法 |
China National Standards of |
English PDF |
GB/T 7985-2005 |
Conveyor belts -- Method for the determination of the tear propagation resistance of textile conveyor belts 输送带 织物芯输送带抗撕裂扩大性试验方法 |
China National Standards of |
English PDF |
GB/T 5754.2-2005 |
Steel cord conveyor belt -- Longitudinal test -- Part 2: Measurement of tensile strength 钢丝绳芯输送带 纵向拉伸试验 第2部分:拉伸强度的测定 |
China National Standards of |
English PDF |
GB/T 3515-2005 |
Rubber -- Determination of carbon black content -- Pyrolytic method 橡胶 炭黑含量的测定 热解法 |
China National Standards of |
English PDF |
GB/T 3402.1-2005 |
Plastics Homopolymer and copolymer resins of vinyl chloride -- Part 1: Designation system and basis for specifiations 塑料 氯乙烯均聚和共聚树脂 第1部分:命名体系和规范基础 |
China National Standards of |
English PDF |
GB/T 20028-2005 |
Rubber,vulcanized or thermoplastic -- Estimation of life-time and maximum temperature of use from an Arrhenius plot 硫化橡胶或热塑性橡胶 应用阿累尼乌斯图推算寿命和最高使用温度 |
China National Standards of |
English PDF |
GB/T 20027-2005 |
Rubber-or plastics-coated fabrics -- Determiation of bursting strength 橡胶或塑料涂覆织物 破裂强度的测定 |
China National Standards of |
English PDF |
GB/T 20026-2005 |
Rubber and plastics hose -- Determination of abrasion of lining 橡胶和塑料软管 内衬层耐磨性测定 |
China National Standards of |
English PDF |
GB/T 20024-2005 |
Rubber and Plastics hoses for fuels for internal-combustion engines -- Method of test for flammability 内燃机用橡胶和塑料燃油软管 可燃性试验方法 |
China National Standards of |
English PDF |
GB/T 20022-2005 |
Plastics -- Homopolymer and Copolymer resins of vinyl chloride Determination of apparent density 塑料 氯乙烯均聚和共聚树脂表观密度的测定 |
China National Standards of |
English PDF |
GB/T 20021-2005 |
Heat resistant conveyor belts of duck construction 帆布芯耐热输送带 |
China National Standards of |
English PDF |
GB/T 1695-2005 |
Rubber,vulcanized -- Determination of electrical breakdown strength and voltage resistant at commercial power frequency 硫化橡胶 工频击穿电压强度和耐电压的测定方法 |
China National Standards of |
English PDF |
GB 19891-2005 |
Safety of machinery-Hygiene requirements for the design of machinery 机械安全 机械设计的卫生要求 |
China National Standards of |
English PDF |
GB/T 4791-2005 |
Graphical symbols for pipline accessory of ships 船舶管路附件图形符号 |
China National Standards of |
English PDF |
GB/T 19911-2005 |
Shipbuilding-Inland navigation-bucket Dredgers-Scale of bucket capacities 造船 内河 链斗挖泥船挖斗容量标定 |
China National Standards of |
English PDF |
GB/T 19910-2005 |
Technical requirements for electronic control system of motor-vehicles engine being overhauled 汽车发动机电子控制系统修理技术要求 |
China National Standards of |
English PDF |
GB/T 19816.7-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards of |
English PDF |
GB/T 19816.6-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards of |
English PDF |
GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards of |
English PDF |
GB/T 18570.9-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法 |
China National Standards of |
English PDF |
GB/T 18570.8-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法 |
China National Standards of |
English PDF |
GB/T 18570.5-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法) |
China National Standards of |
English PDF |
GB/T 18570.3-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards of |
English PDF |
GB/T 18570.10-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法 |
China National Standards of |
English PDF |
GB 3033.2-2005 |
Ships and marine technology-Identification colours for the content of piping systems-Part 2:Additional colours for different media and/or functions 船舶与海上技术 管路系统内含物的识别颜色 第2部分:不同介质和(或)功能的附加颜色 |
China National Standards of |
English PDF |
GB 3033.1-2005 |
Ships and marine technology-Identification colours for the content of piping systems-Part 1:Main colours and media 船舶与海上技术 管路系统内含物的识别颜色 第1部分:主颜色和介质 |
China National Standards of |
English PDF |
GB 5226.4-2005 |
Safety of machinery-Electrical equipment of machines-Part 31:Particular safety and EMC requirements for sewing machines,units and systems 机械安全 机械电气设备 第31部分:缝纫机、缝制单元和缝制系统的特殊安全和EMC要求 |
China National Standards of |
English PDF |
GB 5226.3-2005 |
Sefety of machinery-Eletrical equipment of machines-Part 11:Requirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exceeding 36kV 机械安全 机械电气设备 第11部分:电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件 |
China National Standards of |
English PDF |
GB/T 6148-2005 |
Test method for temperature-resistance coefficient of precision resistance alloys 精密电阻合金电阻温度系数测试方法 |
China National Standards of |
English PDF |
GB/T 6147-2005 |
Test method for thermoelectric power of precision resistance alloys 精密电阻合金热电动势率 测试方法 |
China National Standards of |
English PDF |
GB/T 19902.2-2005 |
Industrial automation systems and integration-Manufacturing software capability profiling for interoperability-Part 2:Profiling methodology 工业自动化系统与集成--制造软件互操作性能力建规 第2部分:建规方法论 |
China National Standards of |
English PDF |
GB/T 19902.1-2005 |
Industrial automation systems and integration-Manufacturing software capability profiling for interoperability-Part 1:Framework 工业自动化系统与集成--制造软件互操作性能力建规 第1部分:框架 |
China National Standards of |
English PDF |
GB/T 19900-2005 |
Dimensions of metal-sheathed thermometer elements 金属铠装温度计元件的尺寸 |
China National Standards of |
English PDF |
GB/T 19898-2005 |
Industrial-Process measurement and control-Documentation of application software 工业过程测量和控制 应用软件文档集 |
China National Standards of |
English PDF |
GB/T 19897.2-2005 |
Automatic Meter Reading System Lower Layer Communication Protocol Part 2:Use of area networks on twisted pair with carrier signalling 自动抄表系统低层通信协议 第2部分:基于双绞线载波信号的局域网使用 |
China National Standards of |
English PDF |
GB/T 19896-2005 |
Degrees of projected image sharpness for 70,35and 16mm motion-picture projection systems 70、35和16mm电影放映系统 画面清晰度等级 |
China National Standards of |
English PDF |
GB/T 19890-2005 |
Acoustics-High intensity focused ultrasound(HIFU)measurements of acoustic power and field characteristics 声学 高强度聚焦超声(HIFU)声功率和声场特性的测量 |
China National Standards of |
English PDF |
GB/T 19889.7-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 7:Field measurements of impact sound insulation of floors 声学 建筑和建筑构件隔声测量 第7部分:楼板撞击声隔声的现场测量 |
China National Standards of |
English PDF |
GB/T 19889.6-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 6:Laboratory measurements of impact sound insulation of floors 声学 建筑和建筑构件隔声测量 第6部分:楼板撞击声隔声的实验室测量 |
China National Standards of |
English PDF |
GB/T 19889.4-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part4:Field measurements of airborne sound insulation between rooms 声学 建筑和建筑构件隔声测量 第4部分:房间之间空气声隔声的现场测量 |
China National Standards of |
English PDF |
GB/T 19889.3-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 3:Laboratory measurements of airborne sound insulation of building elements 声学 建筑和建筑构件隔声测量 第3部分:建筑构件空气声隔声的实验室测量 |
China National Standards of |
English PDF |
GB/T 19889.2-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part2:Determination,verification and application of precision data 声学 建筑和建筑构件隔声测量 第2部分:数据精密度的确定、验证和应用 |
China National Standards of |
English PDF |
GB/T 19889.1-2005 |
Acoustics-Measurement of sound insulation in buildings and of building elements-Part 1:Requirements for laboratory test facilities with suppressed flanking transmission 声学 建筑和建筑构件隔声测量 第1部分:侧向传声受抑制的实验室测试 设施要求 |
China National Standards of |
English PDF |
GB/T 19888.1-2005 |
Acoustics-Stationary audible warning devices used outdoors-Part 1:Field measurements for determination of sound emission quantities 声学 户外用固定式听觉报警器 第1部分:声发射量的现场测定 |
China National Standards of |
English PDF |
GB/T 19887-2005 |
Acoustics-Measurement of the in situ sound attenuation of a removable screen 声学 可移动屏障声衰减的现场测量 |
China National Standards of |
English PDF |
GB/T 19885-2005 |
Acoustics-Determination of sound insulation performance of cabins-laborartory and in situ measurements 声学 隔声间的隔声性能测定 实验室和现场测量 |
China National Standards of |
English PDF |
GB/T 19884-2005 |
Acoustics-In-situ determination of insertion loss of outdoor noise barriers of all types 声学 各种户外声屏障插入损失的现场测定 |
China National Standards of |
English PDF |
GB/T 18784.2-2005 |
Assurance method of CAD/CAM data quality CAD/CAM 数据质量保证方法 |
China National Standards of |
English PDF |
GB/T 17249.2-2005 |
Acoustics-Guidelines for the design of low-noise workplaces-Part 2:Noise control measures 声学 低噪声工作场所设计指南 第2部分:噪声控制措施 |
China National Standards of |
English PDF |
GB/T 17213.6-2005 |
Industrial-process control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分:定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards of |
English PDF |
GB/T 17213.16-2005 |
Industrial-process control valves Part 8-4:Noise considerations-Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分:噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards of |
English PDF |
GB/T 17213.14-2005 |
Industrial-process control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声 |
China National Standards of |
English PDF |
GB/T 17213.13-2005 |
Industrial-process control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotary actuators 工业过程控制阀 第6-2部分:定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装 |
China National Standards of |
English PDF |
GB 6222-2005 |
Safety code for gas of industrial enterprises 工业企业煤气安全规程 |
China National Standards of |
English PDF |
GB 14192-2005 |
Safety code of practice for logging operations 木材采伐运输安全通则 |
China National Standards of |
English PDF |
GB/T 14614.4-2005 |
Determination of rheological properties of dough using alveograph 小麦粉面团流变特性测定 吹泡仪法 |
China National Standards of |
English PDF |
GB/T 8381.9-2005 |
Determination of Choramphenicol in Feeds Gas Chromatography 饲料中氯霉素的测定 气相色谱法 |
China National Standards of |
English PDF |
GB/T 8381.8-2005 |
Determination of Polychlorobiphenyls(PCBs)in Feeds-Gas Chromatography 饲料中多氯联苯的测定 气相色谱法 |
China National Standards of |
English PDF |
GB/T 8381.6-2005 |
Method for determination of deoxynivalenol in formula feed-Thin layer chromatography 配合饲料中脱氧雪腐镰刀菌烯醇的测定 薄层色谱法 |
China National Standards of |
English PDF |
GB/T 8381.5-2005 |
Detemination of kitasamycin in feedstuff 饲料中北里霉素的测定 |
China National Standards of |
English PDF |
GB/T 8381.4-2005 |
Method for determination of T-2 toxin in formula feed-Thin layer chromatography 配合饲料中 T-2 毒素的测定 薄层色谱法 |
China National Standards of |
English PDF |
GB/T 8381.3-2005 |
Detemination of lincomycin in feedstuff 饲料中林可霉素的测定 |
China National Standards of |
English PDF |
GB/T 8381.2-2005 |
Determination of Shigella in feeds 饲料中志贺氏菌的检测方法 |
China National Standards of |
English PDF |
GB/T 8381.11-2005 |
Determination of Amprolium in Feeds-High Performance Liquid Chromatography 饲料中盐酸氨丙啉的测定-高效液相色谱法 |
China National Standards of |
English PDF |
GB/T 8381.10-2005 |
Determination of Sulfaquinoxaline in feeds High-performance Liquid chromatography 饲料中磺胺喹恶啉的测定-高效液相色谱法 |
China National Standards of |
English PDF |
GB/T 17778-2005 |
Determination of d-biotin in premix 预混合饲料中d-生物素的测定 |
China National Standards of |
English PDF |
GB/T 13085-2005 |
Determination of nitrite in feeds-Method using colorimetric analysis 饲料中亚硝酸盐的测定-比色法 |
China National Standards of |
English PDF |
GB/T 13080.2-2005 |
Determination of chelation percentage of iron、copper、manganese and zinc methionine of gel filtration chromatography 饲料添加剂 蛋氨酸铁(铜、锰、锌)螯合率的测定 凝胶过滤色谱法 |
China National Standards of |
English PDF |
GB/T 19857-2005 |
Determination of malachite green and crystal violet residues in aquatic product 水产品中孔雀石绿和结晶紫残留量的测定 |
China National Standards of |
English PDF |
GB/T 19859-2005 |
Product of geographicl indication-kuerle fragrant pear 地理标志产品 库尔勒香梨 |
China National Standards of |
English PDF |
GB/T 19858-2005 |
Product of geographicl indication-Fuling mustard tuber 地理标志产品 涪陵榨菜 |
China National Standards of |
English PDF |
GB 19872-2005 |
Rock drilling machines and pneumatic tools-Limited value of noise 凿岩机械与气动工具 噪声限值 |
China National Standards of |
English PDF |
GB 10892-2005 |
Stationary air compressors-Safety rules and code of practice 固定的空气压缩机 安全规则和操作规程 |
China National Standards of |
English PDF |
GB/T 19875-2005 |
Mechanical vibration and shock-Vibration of stationary structures-Specific requirements for quality management in measurement and evaluation of vibration 机械振动与冲击 固定结构的振动 在振动测量和评价方面质量管理的具体要求 |
China National Standards of |
English PDF |
GB/T 19874-2005 |
Mechanical vibration-Susceptibility and sensitivity of machines to unbalance 机械振动 机器不平衡敏感度和不平衡灵敏度 |
China National Standards of |
English PDF |
Find out:27305Items | To Page of: First -Previous-Next -Last | [220] [221] [222] [223] [224] [225] [226] |