GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 4880.2-2000 |
Codes for the Representation of names of languages--Part 2:Alpha-3 code 语种名称代码 第2部分:3字母代码 |
China National Standards Re |
English PDF |
GB/T 18230.5-2000 |
Plain washers for high-stRength structural bolting hardened and tempered 栓接结构用平垫圈 淬火并回火 |
China National Standards Re |
English PDF |
GB/T 18230.3-2000 |
Hexagon nuts for high-stRength structural bolting with large width across flats--Product grade B--Property classes8 and 10 栓接结构用大六角螺母 B级 8和10级 |
China National Standards Re |
English PDF |
GB/T 18230.2-2000 |
Hexagon bolts forhigh-stRength structural bolting with large width across flats(short thread length)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 短螺纹长度 C级 8.8和10.9级 |
China National Standards Re |
English PDF |
GB/T 18230.1-2000 |
Hexagon bolts for high-stRength structural bolting with large width across flats(thread lengths according to GB/T 3106)--Product grade C--Property classes 8.8 and 10.9 栓接结构用大六角头螺栓 螺纹长度按GB/T 3106 C级 8.8和10.9级 |
China National Standards Re |
English PDF |
GB/T 18214.1-2000 |
Global navigation satellite systems(GNSS)--Part 1:Global positioning system(GPS)--Receiver equipment--Performance standards,methods of testing and required test results 全球导航卫星系统(GNSS) 第1部分:全球定位系统(GPS) 接收设备性能标准、测试方法和要求的测试结果 |
China National Standards Re |
English PDF |
GB/T 18210-2000 |
Crystalline silicon photovoltaic(PV) array--On-site measuRement of I-V characteristics 晶体硅光伏(PV)方阵 I-V特性的现场测量 |
China National Standards Re |
English PDF |
GB/T 12841-2000 |
Generic specification for the transportmechanism of cassette tape Recorders 盒式磁带录音机运带机构通用规范 |
China National Standards Re |
English PDF |
GB/T 1242-2000 |
Dimensions for panel mounted indicating and Recording electrical measuring instruments 安装式指示和记录电测量仪表的尺寸 |
China National Standards Re |
English PDF |
GB/T 12199-2000 |
Environmental testing Requirements and methods for non-broadcast video tape recorders 非广播盒式磁带录像机环境要求和试验方法 |
China National Standards Re |
English PDF |
GB/T 4641-2000 |
Camera usage of 16mm motion-pictuRe film 16mm电影胶片在摄影机上的用法 |
China National Standards Re |
English PDF |
GB/T 4640-2000 |
Camera usage of 35mm motion-pictuRe film 35mm电影胶片在摄影机上的用法 |
China National Standards Re |
English PDF |
GB/T 4639-2000 |
Cinematography--Monophonic 35mm negative photographic sound Record on 35 mm motion-picture film--Position and maximum width dimensions 35mm单声道电影光学声底片上声迹的位置和最大宽度尺寸 |
China National Standards Re |
English PDF |
GB/T 4636-2000 |
Maximum projectable image aRea on35mm motion-picture film--Position and dimensions 35mm影片上最大可放映画面的位置和尺寸 |
China National Standards Re |
English PDF |
GB/T 4635-2000 |
Image aRea produced by camera aperture on 35mm motion-picture film--Position and dimensions 35mm电影摄影机片窗在胶片上形成的画面的位置和尺寸 |
China National Standards Re |
English PDF |
GB/T 2926-2000 |
Leaders and run-out trailers for 35mm and 16mm Release prints--Specification 35mm和16mm电影发行拷贝片头和片尾的技术规格 |
China National Standards Re |
English PDF |
GB/T 18200-2000 |
Report form and contents for radiation induced occupational diseases 职业性放射性疾病报告格式与内容 |
China National Standards Re |
English PDF |
GB/T 18199-2000 |
Medical management and tReatment programme for personnel exposed to accidental external irradiation 外照射事故受照人员的医学处理和治疗方案 |
China National Standards Re |
English PDF |
GB/T 18198-2000 |
Estimation standards of personal cumulative exposuRe to radon decay products for miners 矿工氡子体个人累积暴露量估算规范 |
China National Standards Re |
English PDF |
GB 8281-2000 |
Diagnostic criteria and principles of management for chronic radiation sickness from external exposuRe 外照射慢性放射病诊断标准及处理原则 |
China National Standards Re |
English PDF |
GB 8280-2000 |
Diagnostic criteria and principles of management for acute radiation sickness from external exposuRe 外照射急性放射病诊断标准及处理原则 |
China National Standards Re |
English PDF |
GB 18196-2000 |
Specifications of the medical examinations for the oveRexposed individuals 过量受照人员的医学检查规范 |
China National Standards Re |
English PDF |
GB/T 18203-2000 |
Hygienic standard for StReptococcus hemolyticus in indoor air 室内空气中溶血性链球菌卫生标准 |
China National Standards Re |
English PDF |
GB/T 889.2-2000 |
PRevailing torque type hexagon nuts(with non-metallic insert),style 1,with fine pitch thread 1型非金属嵌件六角锁紧螺母 细牙 |
China National Standards Re |
English PDF |
GB/T 881-2000 |
Taper pins with external thRead 螺尾锥销 |
China National Standards Re |
English PDF |
GB/T 822-2000 |
Cheese head scRews with cross recess 十字槽圆柱头螺钉 |
China National Standards Re |
English PDF |
GB/T 819.1-2000 |
Countersunk flat head scRews(common head style)with cross recess--Part 1:Steel of property class 4.8 十字槽沉头螺钉 第1部分:钢4.8级 |
China National Standards Re |
English PDF |
GB/T 818-2000 |
Pan head scRews with cross recess 十字槽盘头螺钉 |
China National Standards Re |
English PDF |
GB/T 69-2000 |
Countersunk slotted raised head scRews(common head style) 开槽半沉头螺钉 |
China National Standards Re |
English PDF |
GB/T 65-2000 |
Slotted cheese head scRews 开槽圆柱头螺钉 |
China National Standards Re |
English PDF |
GB/T 6187.2-2000 |
PRevailing torque type all-metal hexagon nuts with flange with fine pitch thread 全金属六角法兰面锁紧螺母 细牙 |
China National Standards Re |
English PDF |
GB/T 6187.1-2000 |
PRevailing torque type all-metal hexagon nuts with flange 全金属六角法兰面锁紧螺母 |
China National Standards Re |
English PDF |
GB/T 6186-2000 |
PRevailing torque type all-metal hexagon nuts,style 2--Property class 9 2型全金属六角锁紧螺母 9级 |
China National Standards Re |
English PDF |
GB/T 6185.2-2000 |
PRevailing torque type all-metal hexagon nuts,style 2,with fine pitch thread 2型全金属六角锁紧螺母 细牙 |
China National Standards Re |
English PDF |
GB/T 6185.1-2000 |
PRevailing torque type all-metal hexagon nuts,style 2 2型全金属六角锁紧螺母 |
China National Standards Re |
English PDF |
GB/T 6184-2000 |
PRevailing torque type all-metal hexagon nuts,style 1 1型全金属六角锁紧螺母 |
China National Standards Re |
English PDF |
GB/T 6183.2-2000 |
PRevailing torque type hexagon nutswith flange(with non-metallic insert) with fine pitch thread 非金属嵌件六角法兰面锁紧螺母 细牙 |
China National Standards Re |
English PDF |
GB/T 6183.1-2000 |
PRevailing torque type hexagon nuts with flange(with non-metallic insert) 非金属嵌件六角法兰面锁紧螺母 |
China National Standards Re |
English PDF |
GB/T 6177.2-2000 |
Hexagon nuts with flange--Fine pitch thRead 六角法兰面螺母 细牙 |
China National Standards Re |
English PDF |
GB/T 6176-2000 |
Hexagon nuts,style 2,with fine pitch thRead 2型六角螺母 细牙 |
China National Standards Re |
English PDF |
GB/T 6174-2000 |
Hexagon thin nuts(unchamfeRed) 六角薄螺母 无倒角 |
China National Standards Re |
English PDF |
GB/T 6172.2-2000 |
PRevailing torque type hexagon thin nuts(withnon-metallic insert) 非金属嵌件六角锁紧薄螺母 |
China National Standards Re |
English PDF |
GB/T 6172.1-2000 |
Hexagon thin nuts(chamfeRed) 六角薄螺母 |
China National Standards Re |
English PDF |
GB/T 6171-2000 |
Hexagon nuts,style 1,with fine pitch thRead 1型六角螺母 细牙 |
China National Standards Re |
English PDF |
GB/T 5786-2000 |
Hexagon head bolts with fine pitch thRead--Full thread 六角头螺栓 细牙 全螺纹 |
China National Standards Re |
English PDF |
GB/T 5785-2000 |
Hexagon head bolts with fine pitch thRead 六角头螺栓 细牙 |
China National Standards Re |
English PDF |
GB/T 5783-2000 |
Hexagon head bolts--Full thRead 六角头螺栓 全螺纹 |
China National Standards Re |
English PDF |
GB/T 5781-2000 |
Hexagon head bolts--Full thRead--Product gradeC 六角头螺栓 全螺纹 C级 |
China National Standards Re |
English PDF |
GB/T 5779.3-2000 |
Fasteners--Surface discontinuities--Bolts,scRews and studs for special requirements 紧固件表面缺陷 螺栓、螺钉和螺柱 特殊要求 |
China National Standards Re |
English PDF |
GB/T 5779.1-2000 |
Fasteners--Surface discontinuities--Bolts,scRews and studs for general requirements 紧固件表面缺陷 螺栓、螺钉和螺柱 一般要求 |
China National Standards Re |
English PDF |
GB/T 68-2000 |
Slotted countersunk flat head scRews(common head style) 开槽沉头螺钉 |
China National Standards Re |
English PDF |
GB/T 3098.7-2000 |
Mechanical properties of fasteners--ThRead rolling screws 紧固件机械性能 自挤螺钉 |
China National Standards Re |
English PDF |
GB/T 3098.5-2000 |
Mechanical properties of fasteners--Tapping scRews 紧固件机械性能 自攻螺钉 |
China National Standards Re |
English PDF |
GB/T 3098.4-2000 |
Mechanical properties of fasteners--Nuts--Fine pitch thRead 紧固件机械性能 螺母 细牙螺纹 |
China National Standards Re |
English PDF |
GB/T 3098.3-2000 |
Mechanical properties of fasteners--Set scRews 紧固件机械性能 紧定螺钉 |
China National Standards Re |
English PDF |
GB/T 3098.2-2000 |
Mechanical properties of fasteners--Nuts--Coarse thRead 紧固件机械性能 螺母 粗牙螺纹 |
China National Standards Re |
English PDF |
GB/T 3098.17-2000 |
Mechanical properties of fasteners--PReloading test for the detection of hydrogen embrittlement--Parallel bearing surface method 紧固件机械性能 检查氢脆用预载荷试验 平行支承面法 |
China National Standards Re |
English PDF |
GB/T 120.2-2000 |
Parallel pins with internal thRead,of hardened steel and martensitic stainless steel 内螺纹圆柱销 淬硬钢和马氏体不锈钢 |
China National Standards Re |
English PDF |
GB/T 120.1-2000 |
Parallel pins with internal thRead,of unhardened steel and austenitic stainless steel 内螺纹圆柱销 不淬硬钢和奥氏体不锈钢 |
China National Standards Re |
English PDF |
GB/T 118-2000 |
Taper pins with internal thRead 内螺纹圆锥销 |
China National Standards Re |
English PDF |
GB 18188.1-2000 |
Oil spill dispersant--Technical Regulations 溢油分散剂 技术条件 |
China National Standards Re |
English PDF |
GB/T 4595-2000 |
MeasuRement of noise on board vessels 船上噪声测量 |
China National Standards Re |
English PDF |
GB/T 10708.3-2000 |
Reciprocating rubber seals--Types,dimensions and tolerances--Part 3:Rubber dust seals 往复运动橡胶密封圈结构尺寸系列 第3部分:橡胶防尘密封圈 |
China National Standards Re |
English PDF |
GB/T 10708.2-2000 |
Reciprocating rubber seals--Types,dimensions and tolerances--Part 2:Rubber seals on two-way 往复运动橡胶密封圈结构尺寸系列 第2部分:双向密封橡胶密封圈 |
China National Standards Re |
English PDF |
GB/T 10708.1-2000 |
Reciprocating rubber seals--Types,dimensions and tolerances--Part 1:Rubber seals on one-way 往复运动橡胶密封圈结构尺寸系列 第1部分:单向密封橡胶密封圈 |
China National Standards Re |
English PDF |
GB/T 2659-2000 |
Codes for the Representation of names of countries and regions 世界各国和地区名称代码 |
China National Standards Re |
English PDF |
GB/T 2305-2000 |
Chemical Reagent--Phosphorus(V) oxide 化学试剂 五氧化二磷 |
China National Standards Re |
English PDF |
GB/T 1633-2000 |
Plastics--Thermoplastic materials--Determination of Vicat softening temperatuRe(VST) 热塑性塑料维卡软化温度(VST)的测定 |
China National Standards Re |
English PDF |
GB/T 7306.2-2000 |
Pipe thReads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 2:Taper internal and external threads 55°密封管螺纹 第2部分:圆锥内螺纹与圆锥外螺纹 |
China National Standards Re |
English PDF |
GB/T 7306.1-2000 |
Pipe thReads with 55 degree thread angle where pressure-tight joints are made on the threads--Part 1:Parallel internal and taper external threads 55°密封管螺纹 第1部分:圆柱内螺纹与圆锥外螺纹 |
China National Standards Re |
English PDF |
GB/T 4459.3-2000 |
Mechanical drawings--Representation of splines 机械制图 花键表示法 |
China National Standards Re |
English PDF |
GB/T 18149-2000 |
Centrifugal,mixed flow and axial pumps--Code for hydraulic performance tests--PRecision class 离心泵、混流泵和轴流泵 水力性能试验规范 精密级 |
China National Standards Re |
English PDF |
GB/T 18146.1-2000 |
Hemp fibRe--Part 1:Raw white degummed hemp 大麻纤维 第1部分:大麻精麻 |
China National Standards Re |
English PDF |
GB/T 18154-2000 |
Technical specification of automatic dust explosion suppRession devices 监控式抑爆装置技术要求 |
China National Standards Re |
English PDF |
GB/T 18153-2000 |
Safety of machinery--TemperatuRes of touchable surfaces--Ergonomics data to establish temperature limit values for hot surfaces 机械安全 可接触表面温度 确定热表面温度限值的工效学数据 |
China National Standards Re |
English PDF |
GB/T 15970.7-2000 |
Corrosion of metals and alloys--StRess corrosion testing--Part 7:Slow strain rate testing 金属和合金的腐蚀 应力腐蚀试验 第7部分:慢应变速率试验 |
China National Standards Re |
English PDF |
GB 18152-2000 |
Safety Regulations for ore dressing 选矿安全规程 |
China National Standards Re |
English PDF |
GB/T 17006.3-2000 |
Evaluation and routine testing in medical imaging departments--Part 2-2:Constancy tests--Radio-graphic cassettes and film changers--Film-scReen contact and relative sensitivity of the screen-cassette assembly 医用成像部门的评价及例行试验 第2-2部分:X射线摄影暗匣和换片器 屏-片接触和屏-匣组件相对灵敏度稳定性试验 |
China National Standards Re |
English PDF |
GB/T 10454-2000 |
Flexible fReight container 集装袋 |
China National Standards Re |
English PDF |
GB 9706.3-2000 |
Medical electrical equipment--Part 2:Particular Requirements for the safety of high-voltage generators of diagnostic X-ray generators 医用电气设备 第2部分:诊断X射线发生装置的高压发生器安全专用要求 |
China National Standards Re |
English PDF |
GB 9706.19-2000 |
Medical electrical equipment--Part 2:Particular Requirements for the safety of endoscopic equipment 医用电气设备 第2部分:内窥镜设备安全专用要求 |
China National Standards Re |
English PDF |
GB 10793-2000 |
Medical electrical equipment--Part 2:Particular Requirements for the safety of electrocardiographs 医用电气设备 第2部分:心电图机安全专用要求 |
China National Standards Re |
English PDF |
GB/T 5271.6-2000 |
Information technology--Vocabulary--Part 6:PReparation and handling of data 信息技术 词汇 第6部分:数据的准备与处理 |
China National Standards Re |
English PDF |
GB/T 5271.25-2000 |
Information technology--Vocabulary--Part 25:Local aRea networks 信息技术 词汇 第25部分:局域网 |
China National Standards Re |
English PDF |
GB/T 2311-2000 |
Information technology--Character code structuRe and extension techniques 信息技术 字符代码结构与扩充技术 |
China National Standards Re |
English PDF |
GB/T 18141-2000 |
Information technology--Information interchange on 130 mm optical disk cartridges using themagneto-optical effect,for write once,Read multiple functionality 信息技术 130 mm一次写入多次读出磁光盒式光盘的信息交换 |
China National Standards Re |
English PDF |
GB/T 18139.2-2000 |
Information technology--General structuRe for the interchange of code values--Part 2:Registration of coding schemes 信息技术 代码值交换的通用结构 第2部分:编码方案的登记 |
China National Standards Re |
English PDF |
GB/T 18139.1-2000 |
Information technology--General structuRe for the interchange of code values--Part 1:Identification of coding schemes 信息技术 代码值交换的通用结构 第1部分:编码方案的标识 |
China National Standards Re |
English PDF |
GB/T 18138.2-2000 |
Information technology--Open Systems Interconnection--Conformance test suite for the pResentation layer--Part 2:Test suite structure and test purposes for the ASN.1 basic encodings 信息技术 开放系统互连 表示层一致性测试套 第2部分:ASN.1基本编码测试套结构和测试目的 |
China National Standards Re |
English PDF |
GB/T 18138.1-2000 |
Information technology--Open Systems Interconnection--Conformancetest suite for the pResentation layer--Part 1:Test suite structure and testpurposes for the presentation protocol 信息技术 开放系统互连 表示层一致性测试套 第1部分:表示协议测试套结构和测试目的 |
China National Standards Re |
English PDF |
GB/T 18137.1-2000 |
Information technology--Open Systems Interconnection--Conformance test suite for the ACSE protocol--Part 1:Test suite structuRe and test purposes 信息技术 开放系统互连 ACSE协议一致性测试套 第1部分:测试套结构和测试目的 |
China National Standards Re |
English PDF |
GB/T 17975.2-2000 |
Informationtechnology--Generic coding of moving pictuRes and associated audio information--Part 2:Video 信息技术 运动图像及其伴音信号的通用编码 第2部分:视频 |
China National Standards Re |
English PDF |
GB/T 18155-2000 |
Terminology work--Computer applications--Machine-Readable terminology interchange format(MARTIF)--Negotiated interchange 术语工作 计算机应用 机器可读术语交换格式(MARTIF) 协商交换 |
China National Standards Re |
English PDF |
GB/T 2336-2000 |
Technical Requirements for damper 防振锤技术条件 |
China National Standards Re |
English PDF |
GB/T 18123-2000 |
Audio,video and audiovisual systems--Application of Y/C connector and pReferred electrical matching values for video systems 音频、视频及视听系统 视频系统Y/C连接器的应用和优选电配接值 |
China National Standards Re |
English PDF |
GB/T 18120-2000 |
Methods of measuRement for selective-calling and data equipment used in the mobile services 移动通信选择呼叫和数据设备测量方法 |
China National Standards Re |
English PDF |
GB/T 4269.3-2000 |
Tractors,machinery for agricultuRe and forestry,powered lawn and garden equipment--Symbols for operator controls and other displays--Part 3:Symbols for powered lawn and garden equipment 农林拖拉机和机械、草坪和园艺动力机械 操作者操纵机构和其他显示装置用符号 第3部分:草坪和园艺动力机械用符号 |
China National Standards Re |
English PDF |
GB/T 4269.2-2000 |
Tractors,machinery for agricultuRe and forestry,powered lawn and garden equipment--Symbols for operator controls and otherdisplays--Part 2:Symbols for agricultural tractors and machinery 农林拖拉机和机械、草坪和园艺动力机械 操作者操纵机构和其他显示装置用符号 第2部分:农用拖拉机和机械用符号 |
China National Standards Re |
English PDF |
GB/T 4269.1-2000 |
Tractors,machinery for agricultuRe and forestry,powered lawn and garden equipment--Symbols for operator controls and other displays--Part 1:Common symbols 农林拖拉机和机械、草坪和园艺动力机械 操作者操纵机构和其他显示装置用符号 第1部分:通用符号 |
China National Standards Re |
English PDF |
GB/T 1859-2000 |
Reciprocating internal combustion engines--Measurement of emitted airborne noise--Engineering method and survey method 往复式内燃机 辐射的空气噪声测量 工程法及简易法 |
China National Standards Re |
English PDF |
Find out:25312Items | To Page of: First -Previous-Next -Last | [227] [228] [229] [230] [231] [232] [233] |