GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 8295-2008 |
Natural Rubber and latex - Determination of copper content - Photometric method 天然橡胶和胶乳 铜含量的测定 光度法 |
China National Standards to |
English PDF |
GB/T 7124-2008 |
Adhesives - Determination of tensile lap-shear strength of rigid-to-rigid bonded assemblies 胶粘剂 拉伸剪切强度的测定(刚性材料对刚性材料) |
China National Standards to |
English PDF |
GB/T 6743-2008 |
Plastics(polyester resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value 塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定 |
China National Standards to |
English PDF |
GB/T 532-2008 |
Rubber, vulcanized or thermoplastic - Determination of adhesion to textile fabric 硫化橡胶或热塑性橡胶与织物粘合强度的测定 |
China National Standards to |
English PDF |
GB/T 5211.5-2008 |
Method for the determination of resistance to materials of pigments 颜料耐性测定法 |
China National Standards to |
English PDF |
GB/T 15337-2008 |
General rules for atomic absorption spectrometric analysis 原子吸收光谱分析法通则 |
China National Standards to |
English PDF |
GB/T 14832-2008 |
Test methods for compatibility between hydraulic fluids and standard elastomeric materials 标准弹性体材料与液压液体的相容性试验 |
China National Standards to |
English PDF |
GB/T 13893-2008 |
Paints and varnishes - Determination of resistnace to humidity - Continuous condensation 色漆和清漆 耐湿性的测定 连续冷凝法 |
China National Standards to |
English PDF |
GB/T 13248-2008 |
Rubber and rubber latices - Determination of manganese content - Sodium periodate photometric methodes 橡胶和胶乳 锰含量的测定 高碘酸钠光度法 |
China National Standards to |
English PDF |
GB/T 12830-2008 |
Rubber,vulcanized or thermoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法 |
China National Standards to |
English PDF |
GB/T 11501-2008 |
Photography - Density Measurement - Part 3:Spectral Conditions 摄影 密度测量 第3部分:光谱条件 |
China National Standards to |
English PDF |
GB/T 970.1-2008 |
Circular screwing dies - Part 1: The types and dimensions for circular screwing dies and die stocks 圆板牙 第1部分:圆板牙和圆板牙架的型式和尺寸 |
China National Standards to |
English PDF |
GB/T 9258.2-2008 |
Coated abrasives - Grain size analysis - Part 2: Determination of grain size distribution of macrogrits P12 to P220 涂附磨具用磨料 粒度分析 第2部分:粗磨粒P12~P220粒度组成的测定 |
China National Standards to |
English PDF |
GB/T 7682-2008 |
Milk separator 牛奶分离机 |
China National Standards to |
English PDF |
GB/T 7121.1-2008 |
The strength testing method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法 |
China National Standards to |
English PDF |
GB/T 5862-2008 |
Agricultural tractors and machinery - General purpose quick-action hydraulic couplers 农业拖拉机和机具 通用液压快换接头 |
China National Standards to |
English PDF |
GB/T 4346-2008 |
Machine tools - Manually operated self-centring chucks 机床 手动自定心卡盘 |
China National Standards to |
English PDF |
GB/T 4127.6-2008 |
Bonded abrasive products - Dimensions - Part 6: Grinding wheels for tool and tool room grinding 固结磨具 尺寸 第6部分:工具磨和工具室用砂轮 |
China National Standards to |
English PDF |
GB/T 4127.10-2008 |
Bonded abrasive products - Dimensions - Part 10: Stones for honing and superfinishings 固结磨具 尺寸 第10部分:珩磨和超精磨磨石 |
China National Standards to |
English PDF |
GB/T 21960-2008 |
The testing method and accepting condition of the driver’s seat on agricultural and forestry tractors 农林拖拉机驾驶座试验方法和验收条件 |
China National Standards to |
English PDF |
GB/T 21959-2008 |
Tractor-trailer combination - Specifications 拖拉机运输机组 技术条件 |
China National Standards to |
English PDF |
GB/T 21958-2008 |
Front drive axle for wheeled tractor 轮式拖拉机 前驱动桥 |
China National Standards to |
English PDF |
GB/T 21957-2008 |
The fatigue-life testing method of the axle shaft and drive shaft on the test stand,wheeled agricultural tractor 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法 |
China National Standards to |
English PDF |
GB/T 21956.3-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法 |
China National Standards to |
English PDF |
GB/T 21956.2-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法 |
China National Standards to |
English PDF |
GB/T 21956.1-2008 |
The strength testing method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法 |
China National Standards to |
English PDF |
GB/T 21955-2008 |
Tractors and machinery for agriculture and forestry - Paper friction disc - Technical specifications 农林拖拉机和机械 纸基摩擦片 技术条件 |
China National Standards to |
English PDF |
GB/T 21953-2008 |
Single point cutting tool - Corner radii 单刃刀具 刀尖圆弧半径 |
China National Standards to |
English PDF |
GB/T 21949.2-2008 |
CNC universal tool milling machines - Part 2: Specifications 数控万能工具铣床 第2部分:技术条件 |
China National Standards to |
English PDF |
GB/T 21949.1-2008 |
CNC universal tool milling machines - Part 1: Testing of the accuracy 数控万能工具铣床 第1部分:精度检验 |
China National Standards to |
English PDF |
GB/T 21945-2008 |
Numerical control sector gear shaping machines - Testing of the accuracy 数控扇形齿轮插齿机 精度检验 |
China National Standards to |
English PDF |
GB/T 21942-2008 |
Earth-moving machinery - Loader and front loading excavator buckets - Volumetric ratings 土方机械 装载机和正铲挖掘机的铲斗 容量标定 |
China National Standards to |
English PDF |
GB/T 21941-2008 |
Earth-moving machinery - Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders 土方机械 液压挖掘机和挖掘装载机的反铲斗和抓铲斗 容量标定 |
China National Standards to |
English PDF |
GB/T 21940-2008 |
Earth-moving machinery - Cutting edges used on tractor-dozers, graders and scrapers - Principal shapes and basic dimensions 土方机械 推土机、平地机和铲运机用刀片 主要形状和基本尺寸 |
China National Standards to |
English PDF |
GB/T 21938-2008 |
Earth-moving machinery - Hydraulic excavator and backhoe loader boom-lowering control device - Requirements and tests 土方机械 液压挖掘机和挖掘装载机动臂下降控制装置 要求和试验 |
China National Standards to |
English PDF |
GB/T 21937-2008 |
Earth-moving machinery - Crawler and wheel tractor dozer blades - Volumetric ratings 土方机械 履带式和轮胎式推土机的推土铲 容量标定 |
China National Standards to |
English PDF |
GB/T 19073-2008 |
Gearbox of wind turbine generator systems 风力发电机组 齿轮箱 |
China National Standards to |
English PDF |
GB/T 17111-2008 |
Cutting tool - Designation of high-speed steel groups 切削刀具 高速钢分组代号 |
China National Standards to |
English PDF |
GB/T 15371-2008 |
torsional vibration of crankshaft system - Measurement and evaluation method 曲轴轴系扭转振动的测量与评定方法 |
China National Standards to |
English PDF |
GB/T 15306.4-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 4:Specifications 陶瓷可转位刀片 第4部分:技术条件 |
China National Standards to |
English PDF |
GB/T 15306.3-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U) 陶瓷可转位刀片 第3部分:无孔刀片尺寸(U级) |
China National Standards to |
English PDF |
GB/T 15306.2-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 2: Dimensions of inserts with cylindrical fixing hole 陶瓷可转位刀片 第2部分:带孔刀片尺寸 |
China National Standards to |
English PDF |
GB/T 15306.1-2008 |
Indexable inserts for cutting tools - Ceramic inserts with rounded corners - Part 1: Dimensions of inserts without fixing hole(Class G) 陶瓷可转位刀片 第1部分:无孔刀片尺寸(G级) |
China National Standards to |
English PDF |
GB/T 14321-2008 |
Testing method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer 刚玉磨料中α-Al2O3相X射线定量测定方法 |
China National Standards to |
English PDF |
GB/T 14319-2008 |
Bonded abrasive products - Vitrified stones for force-honing and superfinishing 固结磨具 陶瓷结合剂强力珩磨磨石与超精磨磨石 |
China National Standards to |
English PDF |
GB/T 7320-2008 |
Refractories - Determination of thermal expansion 耐火材料 热膨胀试验方法 |
China National Standards to |
English PDF |
GB/T 5989-2008 |
Refractory products - Determination of refractoriness-under-load - Differential method with rising temperature 耐火材料 荷重软化温度试验方法 示差升温法 |
China National Standards to |
English PDF |
GB/T 17732-2008 |
Dense,shaped refractory products - Test methods for products containing carbon 致密定形含碳耐火制品试验方法 |
China National Standards to |
English PDF |
GB/T 14983-2008 |
Refractory products - Determination of alkali-resistance 耐火材料 抗碱性试验方法 |
China National Standards to |
English PDF |
GB/T 21933.3-2008 |
Ferronickel - Determination of cobalt content - Flame atomic absorption spectrometric method 镍铁 钴含量的测定 火焰原子吸收光谱法 |
China National Standards to |
English PDF |
GB/T 21932-2008 |
Nickel and ferronickel - Determination of sulphur content - Barium sulfate gravimctric method after alumina chromatographic separation 镍和镍铁 硫含量的测定 氧化铝色层分离-硫酸钡重量法 |
China National Standards to |
English PDF |
GB/T 4728.11-2008 |
Graphical symbols for diagrams - Part 11:Architectural and topographical installation plans and diagrams 电气简图用图形符号 第11部分:建筑安装平面布置图 |
China National Standards to |
English PDF |
GB/T 21919-2008 |
Laboratory medicine - Requirements for reference measurement laboratories 检验医学 参考测量实验室的要求 |
China National Standards to |
English PDF |
GB/T 7463-2008 |
Surface active agents - Determination of the power to dispersecalcium soap - Acidimetric .method (Modifled Schoenfeldt method) 表面活性剂 钙皂分散力的测定 酸量滴定法 (改进Schoenfeldt法) |
China National Standards to |
English PDF |
GB/T 18749-2008 |
Standard specification for chemical-resistant ceramic tower packings 耐化学腐蚀陶瓷塔填料技术条件 |
China National Standards to |
English PDF |
GB/T 936-2008 |
Color display chromaticity coordinates of white balance point and its tolerance 彩色显示器白平衡点色坐标及其宽容度 |
China National Standards to |
English PDF |
GB/T 13813-2008 |
Testing method and judging rule of safety to friction spark of metallic material for coal mine 煤矿用金属材料摩擦火花安全性试验方法和判定规则 |
China National Standards to |
English PDF |
GB/T 9996.2-2008 |
Determination of appearance quality of yarns made of cotton or man-made fibers,or their blends by winding on the black board - Part 2: individual assessment 棉及化纤纯纺、混纺纱线外观质量黑板检验方法 第2部分:分别评定法 |
China National Standards to |
English PDF |
GB/T 9996.1-2008 |
Determination of appearance quality of yarns made of cotton or man-made fibres,or their blends by winding on the black board - Part 1:comprehensive assessment 棉及化纤纯纺、混纺纱线外观质量黑板检验方法 第1部分:综合评定法 |
China National Standards to |
English PDF |
GB/T 411-2008 |
Printed and dyed cotton fabric 棉印染布 |
China National Standards to |
English PDF |
GB/T 406-2008 |
Cotton grey fabric 棉本色布 |
China National Standards to |
English PDF |
GB/T 398-2008 |
Cotton grey yarns 棉本色纱线 |
China National Standards to |
English PDF |
GB/T 6498-2008 |
Test method for Micronaire value of cotton fibers 棉纤维马克隆值试验方法 |
China National Standards to |
English PDF |
GB 7260.1-2008 |
Uninterruptible power systems(UPS) - Part 1-1: General and safety requirements for UPS used in operator access areas 不间断电源设备 第1-1部分: 操作人员触及区使用的UPS的一般规定和安全要求 |
China National Standards to |
English PDF |
GB 20800.3-2008 |
General rules of explosion-protect techniques of reciprocating internal combustion engines for explosive atmospheres - Part 3: Group I engines for use in underground workings susceptible to firedamp and/or combustible dust 爆炸性环境用往复式内燃机防爆技术通则 第3部分:存在甲烷和(或)可燃性粉尘的地下矿区巷道用I类内燃机 |
China National Standards to |
English PDF |
GB/Z 21743-2008 |
Stationary proton exchange membrane fuel cell power system (separate) - Tests methods for the performance 固定式质子交换膜燃料电池发电系统(独立型)性能试验方法 |
China National Standards to |
English PDF |
GB/Z 21742-2008 |
Portable proton exchange membrane fuel cell power systems 便携式质子交换膜燃料电池发电系统 |
China National Standards to |
English PDF |
GB/T 2900.27-2008 |
Electrotechnical terminology - Small-power motor 电工术语 小功率电动机 |
China National Standards to |
English PDF |
GB/T 20042.2-2008 |
Proton exchange membrane fuel cell - General technical specification of fuel cell stacks 质子交换膜燃料电池 电池堆通用技术条件 |
China National Standards to |
English PDF |
GB/T 17626.7-2008 |
Electromagnetic compatibility - Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto 电磁兼容 试验和测量技术 供电系统及所连设备谐波、谐间波的测量和测量仪器导则 |
China National Standards to |
English PDF |
GB/T 17626.6-2008 |
Electromagnetic compatibility - Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields 电磁兼容 试验和测量技术 射频场感应的传导骚扰抗扰度 |
China National Standards to |
English PDF |
GB/T 21927-2008 |
Determination of Tertiary Butylhydroquinone in foods - High-Performance of liquid chromatography 食品中叔丁基对苯二酚的测定 高效液相色谱法 |
China National Standards to |
English PDF |
GB/T 21917-2008 |
Method for Determination of Ethyl Maltol in Beverage 饮料中乙基麦芽酚的测定方法 |
China National Standards to |
English PDF |
GB/T 21916-2008 |
Determination of synthetic colour in fruit tins - High performance liquid chromatography 水果罐头中合成着色剂的测定 高效液相色谱法 |
China National Standards to |
English PDF |
GB/T 21915-2008 |
Determination of natamycin in food - By high-performance liquid chromatography 食品中纳他霉素的测定 液相色谱法 |
China National Standards to |
English PDF |
GB/T 21914-2008 |
Determination of Benzyl Acetate in tea-drink - Gas chromatography method 茶饮料中乙酸苄酯的测定 气相色谱法 |
China National Standards to |
English PDF |
GB/T 22224-2008 |
Determination of dietary fiber in foods - Enzymatic gravimetric method and enzymatic gravimetric method - Liquid chromatography 食品中膳食纤维的测定 酶重量法和酶重量法-液相色谱法 |
China National Standards to |
English PDF |
GB/T 22223-2008 |
Determination of total fat, saturated fat, and unsaturated fat in foods - Hydrolytic Extraction - Gas Chromatography 食品中总脂肪、饱和脂肪(酸)、不饱和脂肪(酸)的测定 水解提取-气相色谱法 |
China National Standards to |
English PDF |
GB/T 22222-2008 |
Determination of xylitol, sorbitol, maltitol in foods - High-performance liquid chromatography 食品中木糖醇、山梨醇、麦芽糖醇的测定 高效液相色谱法 |
China National Standards to |
English PDF |
GB/T 22221-2008 |
Determination of fructose, glucose, sucrose, maltose, lactose in foods - High-performance liquid chromatography 食品中果糖、葡萄糖、蔗糖、麦芽糖、乳糖的测定 高效液相色谱法 |
China National Standards to |
English PDF |
GB/T 22220-2008 |
Determination of cholesterol in foods - High-performance liquid chromatography 食品中胆固醇的测定 高效液相色谱法 |
China National Standards to |
English PDF |
GB/T 8984-2008 |
Determination of carbon monoxide,carbon dioxide and hydrocarbon in gases - Gas chromatographic method 气体中一氧化碳、二氧化碳和碳氢化合物的测定 气相色谱法 |
China National Standards to |
English PDF |
GB/T 8981-2008 |
Determination of trace hydrogen in gases - Gas chromatographic method 气体中微量氢的测定 气相色谱法 |
China National Standards to |
English PDF |
GB/T 8298-2008 |
Natural rubber latex concentrate - Determination of total solids content 浓缩天然胶乳 总固体含量的测定 |
China National Standards to |
English PDF |
GB/T 6682-2008 |
Water for analytical laboratory use - Specification and test methods 分析实验室用水规格和试验方法 |
China National Standards to |
English PDF |
GB/T 686-2008 |
Chemical reagent - Acetone 化学试剂 丙酮 |
China National Standards to |
English PDF |
GB/T 21896-2008 |
2-Naphthylamine-1,5-disulfonic acid (Sulphonic tobias acid ) 2-萘胺-1,5-二磺酸(磺化吐氏酸) |
China National Standards to |
English PDF |
GB/T 21894-2008 |
A kind of photosensitive emulsion for plate making on fabric rotary screen printing 纺织圆网印花制版感光乳液 |
China National Standards to |
English PDF |
GB/T 21893-2008 |
A kind of photosensitive emulsion(double component) for plate making on fabric screen printing 纺织平网印花制版感光乳液 |
China National Standards to |
English PDF |
GB/T 21840-2008 |
Vulcanizing accelerator TBBS 硫化促进剂 TBBS |
China National Standards to |
English PDF |
GB/T 18013-2008 |
Raw natural rubber - Determination of accelerated storage-hardening number 天然生胶 加速贮存硬化值的测定 |
China National Standards to |
English PDF |
GB/T 7815-2008 |
Pentaerythritol for industrial use 工业用季戊四醇 |
China National Standards to |
English PDF |
GB/T 6745-2008 |
topside paint 船壳漆 |
China National Standards to |
English PDF |
GB/T 2468-2008 |
Pyrites and concentrate - Determination of zinc content - Flame atomic absorption spectrometric and spectrphotometric methods 硫铁矿和硫精矿中锌含量的测定 火焰原子吸收光谱法和分光光度法 |
China National Standards to |
English PDF |
GB/T 2467-2008 |
Pyrites and concentrate - Determination of lead content - Flame atomic absorption spectrometric and EDTA volumetric methods 硫铁矿和硫精矿中铅含量的测定 火焰原子吸收光谱法和EDTA容量法 |
China National Standards to |
English PDF |
GB/T 2466-2008 |
Pyrites and concentrate - Determination of copper content - Flame atomic absorption spectrometric and spectrophotometric methods 硫铁矿和硫精矿中铜含量的测定 火焰原子吸收光谱法和分光光度法 |
China National Standards to |
English PDF |
GB/T 2463-2008 |
Pyrites and concentrate - Determination of total iron content - Cerium sulfate volumetric and potassium dichromate volumetric methods 硫铁矿和硫精矿中全铁含量的测定 硫酸铈容量法和重铬酸钾容量法 |
China National Standards to |
English PDF |
GB/T 2366-2008 |
Determination of water content in industrial chemicals - Gas chromatographic method 化工产品中水含量的测定 气相色谱法 |
China National Standards to |
English PDF |
GB/T 21874-2008 |
Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - Thermoplastic elastomers 弹性体密封件 排水管道接口密封件材料要求 热塑性弹性体 |
China National Standards to |
English PDF |
GB/T 21868.5-2008 |
Pigments and extenders - Methods of dispersion for assessment of dispersion characteristics - Part 5: Dispersion using an automatic muller 颜料和体质颜料 评定分散性用的分散方法 第5部分:用自动平磨机分散 |
China National Standards to |
English PDF |
Find out:12706Items | To Page of: First -Previous-Next -Last | [87] [88] [89] [90] [91] [92] [93] |