Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 34428.3-2017 |
Communication rules of the devices of surveillance and control system for expressway—Part 3：LED chanGeable message sign 高速公路监控设施通信规程 第3部分：LED可变信息标志 |
China National Standards G |
 English PDF |
| GB/T 20626.1-2017 |
Specific environmental condition—Electric and electronic products for plateau—Part 1:General technical requirements 特殊环境条件 高原电工电子产品 第1部分：通用技术要求 |
China National Standards G |
English PDF |
| GB/T 30843.3-2017 |
Variable-frequency drive above 1kV and not exceedinG 35kV—Part 3: Safety requirements 1kV以上不超过35kV的通用变频调速设备 第3部分：安全规程 |
China National Standards G |
English PDF |
| GB/T 14048.13-2017 |
Low-voltaGe switchgear and controlgear—Part 5-3: Control circuit devices and switching elements—Requirements for proximity devices with defined behaviour under fault conditions (PDDB) 低压开关设备和控制设备 第5-3部分：控制电路电器和开关元件 在故障条件下具有确定功能的接近开关（PDDB）的要求 |
China National Standards G |
English PDF |
| GB/T 18211-2017 |
General requirements for safety of electrical micro-machines 微电机安全通用要求 |
China National Standards G |
English PDF |
| GB/T 22698-2017 |
Guide on the safety of multimedia equipment 多媒体设备安全指南 |
China National Standards G |
English PDF |
| GB/T 1303.5-2017 |
Industrial riGid laminated sheets based on thermosetting resins for electrical purposes—Part 5: Requirements for rigid laminated sheets based on melamine resins 电气用热固性树脂工业硬质层压板 第5部分：三聚氰胺树脂硬质层压板 |
China National Standards G |
English PDF |
| GB/T 11373-2017 |
Thermal sprayinG—Pre-treatment of surfaces of metallic parts and components 热喷涂 金属零部件表面的预处理 |
China National Standards G |
English PDF |
| GB/T 20848-2017 |
MoorinG chain 系泊链 |
China National Standards G |
English PDF |
| GB/T 34368-2017 |
Technical requirement for major maintenance of passenGer ropeway 客运索道重大修理的技术要求 |
China National Standards G |
English PDF |
| GB/T 4678.4-2017 |
DiecastinG dies—Components—Part 4: Square guide pillars 压铸模 零件 第4部分：方导柱 |
China National Standards G |
English PDF |
| GB/T 28807.3-2017 |
Railway applications—Compatibility between rollinG stock and train detection systems—Part 3:Compatibility with axle counters 轨道交通 机车车辆和列车检测系统的兼容性 第3部分：与计轴器的兼容性 |
China National Standards G |
English PDF |
| GB/T 28807.2-2017 |
Railway applications—Compatibility between rollinG stock and train detection systems—Part 2: Compatibility with track circuits 轨道交通 机车车辆和列车检测系统的兼容性 第2部分：与轨道电路的兼容性 |
China National Standards G |
English PDF |
| GB/T 5019.12-2017 |
Specification for insulatinG materials based on mica— Part 12：Glass fabric backup epoxy dry mica tape with high porosity 以云母为基的绝缘材料 第12部分：高透气性玻璃布补强环氧少胶云母带 |
China National Standards G |
English PDF |
| GB/T 34570.1-2017 |
Safety for recharGeable battery packs and chargers for electric tools—Part 1：Safety for rechargeable battery packs 电动工具用可充电电池包和充电器的安全 第1部分：电池包的安全 |
China National Standards G |
English PDF |
| GB/T 34569-2017 |
Simulation traininG system for live working 带电作业仿真训练系统 |
China National Standards G |
English PDF |
| GB/T 17799.1-2017 |
ElectromaGnetic compatibility—Generic standards—Immunity for residential, commercial and light-industrial environments 电磁兼容 通用标准 居住、商业和轻工业环境中的抗扰度 |
China National Standards G |
English PDF |
| GB/T 34370.1-2017 |
Nondestructive testinG of amusement equipments—Part 1：General requirement 游乐设施无损检测 第1部分：总则 |
China National Standards G |
English PDF |
| GB/T 34370.5-2017 |
Nondestructive testinG of amusement equipments—Part 5：Ultrasonic testing 游乐设施无损检测 第5部分：超声检测 |
China National Standards G |
English PDF |
| GB/T 34370.6-2017 |
Nondestructive testinG of amusement equipments—Part 6：Radiographic testing 游乐设施无损检测 第6部分：射线检测 |
China National Standards G |
English PDF |
| GB/T 34369-2017 |
General technical conditions for electrical control device of passenger ropeway 客运索道电气装置通用技术条件 |
China National Standards G |
English PDF |
| GB/T 34370.2-2017 |
Nondestructive testinG of amusement equipments－Part 2:Visual examination 游乐设施无损检测 第2部分：目视检测 |
China National Standards G |
English PDF |
| GB/T 34370.4-2017 |
Nondestructive testinG of amusement equipments—Part 4：Penetrant testing 游乐设施无损检测 第4部分：渗透检测 |
China National Standards G |
English PDF |
| GB/T 34371-2017 |
Risk assessment for amusement ride—General principles 游乐设施风险评价 总则 |
China National Standards G |
English PDF |
| GB/T 34370.3-2017 |
Nondestructive testinG of amusement equipments—Part 3：Magnetic particle testing 游乐设施无损检测 第3部分：磁粉检测 |
China National Standards G |
English PDF |
| GB/T 34570.2-2017 |
Safety for recharGeable battery packs and chargers for electric tools—Part 2: Safety for chargers 电动工具用可充电电池包和充电器的安全 第2部分：充电器的安全 |
China National Standards G |
English PDF |
| GB/T 34577-2017 |
Technical Guide for by-pass working on distribution line 配电线路旁路作业技术导则 |
China National Standards G |
English PDF |
| GB/T 34578-2017 |
Technical requirements for operation,maintenance and test of instrumentation and actuatinG equipment in thermal power plant 火力发电厂热工仪表与执行装置运行维护与试验技术规程 |
China National Standards G |
English PDF |
| GB/T 34572-2017 |
Railway applications—Current collection system—PantoGraphs,testing methods for carbon contact strips 轨道交通 受流系统 受电弓碳滑板试验方法 |
China National Standards G |
English PDF |
| GB/T 2099.9-2017 |
PluGs and socket-outlets for household and similar purposes—Part 2-9: Particular requirements for socket-outlets for information 家用和类似用途插头插座 第2-9部分：信息插座的特殊要求 |
China National Standards G |
English PDF |
| GB/Z 30556.3-2017 |
ElectromaGnetic compatibility—Installation and mitigation guidelines－HEMP protection concepts 电磁兼容 安装和减缓导则 高空核电磁脉冲（HEMP）的防护概念 |
China National Standards G |
English PDF |
| GB/T 17587.1-2017 |
Ball screws—Part 1: Vocabulary and desiGnation 滚珠丝杠副 第1部分：术语和符号 |
China National Standards G |
English PDF |
| GB/T 14745-2017 |
Test method of creep properties for packaGe cushioning material 包装用缓冲材料蠕变特性试验方法 |
China National Standards G |
English PDF |
| GB/T 15902-2017 |
Conveyor belts—Determination of elastic and permanent elonGation and calculation of elastic modulus 输送带 弹性伸长率和永久伸长率的测定及弹性模量的计算 |
China National Standards G |
English PDF |
| GB/T 23677-2017 |
LiGht conveyor belts 轻型输送带 |
China National Standards G |
English PDF |
| GB/T 34365-2017 |
Non-destructive testinG—Terminology—Terms used in industrial computed tomography testing 无损检测 术语 工业计算机层析成像(CT)检测 |
China National Standards G |
English PDF |
| GB/T 34580-2017 |
Standard test method for measurement of lubricant Generated insoluble color bodies in in-service turbine oils—Membrane patch colorimetry 运行涡轮机油中不溶有色物质的测定方法 膜片比色法 |
China National Standards G |
English PDF |
| GB/T 34579-2017 |
Methods of measurement and limits for radiated disturbances from plasma display panel equipment in the frequency ranGe 150kHz to 30MHz 等离子显示设备150kHz～30MHz辐射骚扰限值和测量方法 |
China National Standards G |
English PDF |
| GB/T 34582-2017 |
SinGle cell and stack performance test methods for solid oxide fuel cells (SOFC) 固体氧化物燃料电池单电池和电池堆性能试验方法 |
China National Standards G |
English PDF |
| GB/T 34581-2017 |
General technical requirements for photovoltaic system DC circuit breakers 光伏系统用直流断路器通用技术要求 |
China National Standards G |
English PDF |
| GB/T 16563-2017 |
Series 1 freiGht containers—Specification and testing—Tank containers for liquids, gases and pressurized dry bulk 系列1集装箱 技术要求和试验方法 液体、气体及加压干散货罐式集装箱 |
China National Standards G |
English PDF |
| GB/T 34640.1-2017 |
Classification and recyclinG and utilization of wrought aluminium and aluminium alloy scraps—Part 1：Classification of scraps 变形铝及铝合金废料分类、回收与利用 第1部分：废料的分类 |
China National Standards G |
English PDF |
| GB/T 4698.20-2017 |
Methods for chemical analysis of titanium sponGe, titanium and titanium alloys—Part 4：Determination of manganese content—Potassium periodate spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第4部分：锰量的测定 高碘酸盐分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards G |
English PDF |
| GB/T 4698.19-2017 |
Methods for chemical analysis of titanium sponGe, titanium and titanium alloys—Part 19：Determination of molybdenum content—Thiocyanate-differential spectrophotometry 海绵钛、钛及钛合金化学分析方法 第19部分：钼量的测定 硫氰酸盐示差光度法 |
China National Standards G |
English PDF |
| GB/T 4698.5-2017 |
Methods for chemical analysis of titanium sponGe, titanium and titanium alloys—Part 5：Determination of molybdenum content—Thiocyanate spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第5部分：钼量的测定 硫氰酸盐分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards G |
English PDF |
| GB/T 13747.21-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 21：Determination of hydroGen content—Inert gas fusion-infrared absorption or thermal conductivity method 锆及锆合金化学分析方法 第21部分：氢量的测定 惰气熔融红外吸收法/热导法 |
China National Standards G |
English PDF |
| GB/T 34571-2017 |
Railway applications—Rules for installation of cablinG on rolling stock 轨道交通 机车车辆布线规则 |
China National Standards G |
English PDF |
| GB/T 15022.8-2017 |
Resin based reactive compounds used for electrical insulation— Part 8：Epoxy modified unsaturated polyester vacuum pressure impreGnation (VPI) resin 电气绝缘用树脂基活性复合物 第8部分：环氧改性不饱和聚酯真空压力浸渍(VPI)树脂 |
China National Standards G |
English PDF |
| GB/T 34574-2017 |
Limits and measurements of electromaGnetic emission for high-speed train 高速列车电磁发射限值与测量 |
China National Standards G |
English PDF |
| GB/T 311.3-2017 |
Insulation co-ordination—Part 3: Procedures for hiGh-voltage direct current (HVDC) converter stations 绝缘配合 第3部分：高压直流换流站绝缘配合程序 |
China National Standards G |
English PDF |
| GB/T 34576-2017 |
Specifications for steam turbine used in Gas-steam combined-cycle unit 燃气-蒸汽联合循环用汽轮机规范 |
China National Standards G |
English PDF |
| GB/T 20897.3-2017 |
Inflatable boats—Part3: Boats with a maximum motor power ratinG of 15 kW and greater 充气艇 第3部分：发动机最大额定功率为15 kW及以上的艇 |
China National Standards G |
English PDF |
| GB/T 6883-2017 |
Cemented carbide sinterinG body for wire, bar or tube drawing dies—Dimensions 线、棒、管拉模用硬质合金烧结品 尺寸 |
China National Standards G |
English PDF |
| GB/T 34640.3-2017 |
Classification and recyclinG and utilization of wrought aluminium and aluminium alloy scraps—Part 3：Utilization of scraps 变形铝及铝合金废料分类、回收与利用 第3部分：废料的利用 |
China National Standards G |
English PDF |
| GB/T 34642-2017 |
Continuous castinG machine for aluminum ingots 铝锭连续铸造机组 |
China National Standards G |
English PDF |
| GB/T 34640.2-2017 |
Classification and recyclinG and utilization of wrought aluminium and aluminium alloy scraps—Part 2：Recycling of scraps 变形铝及铝合金废料分类、回收与利用 第2部分：废料的回收 |
China National Standards G |
English PDF |
| GB/T 34647-2017 |
Temper desiGnation system for titanium and titanium alloy 钛及钛合金产品状态代号 |
China National Standards G |
English PDF |
| GB/T 3250-2017 |
ShearinG and riveting test method of wires and rods for the aluminum and aluminum-alloy rivets 铝及铝合金铆钉用线材和棒材剪切与铆接试验方法 |
China National Standards G |
English PDF |
| GB/T 34649-2017 |
MaGnetron sputtering ruthenium target 磁控溅射用钌靶 |
China National Standards G |
English PDF |
| GB/T 34630.1-2017 |
Friction stir weldinG—Aluminium and its alloys—Part 1：Terminology and definition 搅拌摩擦焊 铝及铝合金 第1部分：术语及定义 |
China National Standards G |
English PDF |
| GB/T 34626.1-2017 |
Metallic and other inorGanic coatings—Cleaning and preparation of metal surfaces—Part 1: Ferrous metals and alloys 金属及其他无机覆盖层 金属表面的清洗和准备 第1部分：钢铁及其合金 |
China National Standards G |
English PDF |
| GB/T 4698.8-2017 |
Methods for chemical analysis of titanium sponGe, titanium and titanium alloys—Part 8：Determination of aluminum content—Separation with sodium hydroxide-EDTA complex-metric titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第8部分：铝量的测定 碱分离-EDTA络合滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards G |
English PDF |
| GB/T 13747.13-2017 |
Methods for chemical analysis of zirconium and zirconium alloys—Part 13: Determination of lead content—PolaroGraphy 锆及锆合金化学分析方法 第13部分：铅量的测定 极谱法 |
China National Standards G |
English PDF |
| GB/T 34374-2017 |
StampinG dies—L-shaped guide plates 冲模 L形导板 |
China National Standards G |
English PDF |
| GB/T 34372-2017 |
WalkinG tractor—Drawbar dimensions and power take-off types 手扶拖拉机 牵引装置尺寸及动力输出装置型式 |
China National Standards G |
English PDF |
| GB/T 15370.7-2017 |
AGricultural tractors—General requirement—Part 7: Three-wheel boat tractors 农业拖拉机 通用技术条件 第7部分：三轮船式拖拉机 |
China National Standards G |
English PDF |
| GB/T 4678.2-2017 |
DiecastinG dies—Components—Part 2: Round inserts 压铸模 零件 第2部分：圆形镶块 |
China National Standards G |
English PDF |
| GB/T 34630.5-2017 |
Friction stir weldinG—Aluminium and its alloys—Part 5：Quality and inspection requirements 搅拌摩擦焊 铝及铝合金 第5部分：质量与检验要求 |
China National Standards G |
English PDF |
| GB/T 34630.3-2017 |
Friction stir weldinG—Aluminium and its alloys—Part 3：Qualification of welding operators 搅拌摩擦焊 铝及铝合金 第3部分：焊接操作工的技能评定 |
China National Standards G |
English PDF |
| GB/T 34630.4-2017 |
Friction stir weldinG—Aluminium and its alloys—Part 4：Specification and qualification of welding procedures 搅拌摩擦焊 铝及铝合金 第4部分：焊接工艺规程及评定 |
China National Standards G |
English PDF |
| GB/T 32076.8-2017 |
HiGh-strength structural bolting assemblies for preloading—Part 8: Torshear type bolt with cup head,and nut assemblies 预载荷高强度栓接结构连接副 第8部分：扭剪型圆头螺栓和螺母连接副 |
China National Standards G |
English PDF |
| GB/T 34627-2017 |
Metallic and other inorGanic coatings—Definitions and conventions concerning appearance 金属及其他无机覆盖层 外观的定义及习惯用法 |
China National Standards G |
English PDF |
| GB/T 1819.13-2017 |
Methods for chemical analysis of tin concentrates—Part 13: Determination of maGnesium oxide content,calcium oxide content—Flame atomic absorption spectrometric method 锡精矿化学分析方法 第13部分：氧化镁、氧化钙量的测定 火焰原子吸收光谱法 |
China National Standards G |
English PDF |
| GB/T 34641-2017 |
Non-destructive testinG—Test method for determining image quality in direct thermal neutron radiographic examination 无损检测 直接热中子照相检测的像质测定方法 |
China National Standards G |
English PDF |
| GB/T 29497-2017 |
HiGh-flash aromatic hydrocarbon solvents 高沸点芳烃溶剂 |
China National Standards G |
English PDF |
| GB/T 34626.2-2017 |
Metallic and other inorGanic coatings—Cleaning and preparation of metal surfaces—Part 2: Non-ferrous metals and alloys 金属及其他无机覆盖层 金属表面的清洗和准备 第2部分：有色金属及其合金 |
China National Standards G |
English PDF |
| GB/T 34644-2017 |
Eddy current testinG method for zirconium and zirconium alloy tube 锆及锆合金管材涡流检测方法 |
China National Standards G |
English PDF |
| GB/T 34645-2017 |
Contractile strain ratio testinG of metal materials tubing 金属管材收缩应变比试验方法 |
China National Standards G |
English PDF |
| GB/T 34634-2017 |
Geometrical product specifications (GPS)—Measurement of linear sizes (500 mm-10000 mm) of plain workpiece—Choice of measuring instrument 产品几何技术规范(GPS) 光滑工件尺寸(500mm～10000mm)测量 计量器具选择 |
China National Standards G |
English PDF |
| GB/T 34638-2017 |
Non-destructive testinG—Test methods for ultrasonic leak detection 无损检测 超声泄漏检测方法 |
China National Standards G |
English PDF |
| GB/T 34648-2017 |
Metallic and other inorGanic coatings—Autocatalytic nickel over autocatalytic copper for electromagnetic shielding 金属及其他无机覆盖层 电磁屏蔽用化学镀铜上化学镀镍 |
China National Standards G |
English PDF |
| GB/T 18916.32-2017 |
Norm of water intake—Part 32：Iron ore mineral processinG 取水定额 第32部分：铁矿选矿 |
China National Standards G |
English PDF |
| GB/T 4698.18-2017 |
Methods for chemical analysis of titanium sponGe, titanium and titanium alloys—Part 18：Determination of tin content—Flame atomic absorption spectrometry 海绵钛、钛及钛合金化学分析方法 第18部分：锡量的测定 火焰原子吸收光谱法 |
China National Standards G |
English PDF |
| GB/T 4698.24-2017 |
Methods for chemical analysis of titanium sponGe, titanium and titanium alloys—Part 24：Determination of nickel content—Dimethylglyoxime spectrophotometry and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第24部分：镍量的测定 丁二酮肟分光光度法和电感耦合等离子体原子发射光谱法 |
China National Standards G |
English PDF |
| GB/T 1819.10-2017 |
Methods for chemical analysis of tin concentrates—Part 10: Determination of sulfur content—HiGh frequency combustion with infrared absorption method and potassium iodate titrimetric method 锡精矿化学分析方法 第10部分：硫量的测定 高频感应炉燃烧红外吸收法和碘酸钾滴定法 |
China National Standards G |
English PDF |
| GB/T 4698.9-2017 |
Methods for chemical analysis of titanium sponGe,titanium and titanium alloys—Part 9：Determination of tin content—Potassium iodate titration and inductively coupled plasma atomic emission spectrometry 海绵钛、钛及钛合金化学分析方法 第9部分：锡量的测定 碘酸钾滴定法和电感耦合等离子体原子发射光谱法 |
China National Standards G |
English PDF |
| GB/T 18690.3-2017 |
AGricultural irrigation equipment—Filters for microirrigation—Part 3:Automatic flushing strainer-type filters and disc filters 农业灌溉设备 微灌用过滤器 第3部分：自动冲洗网式过滤器和叠片式过滤器 |
China National Standards G |
English PDF |
| GB/T 34618-2017 |
Temperature detection method for judGing internal leakage faults of working valves in steam drainage steam 蒸汽疏水系统在线阀门内漏温度检测方法 |
China National Standards G |
English PDF |
| GB/T 34619-2017 |
Test method for volumetric flow of positive displacement refriGerant compressors 容积式制冷剂压缩机容积流量试验方法 |
China National Standards G |
English PDF |
| GB/T 34620-2017 |
CateGory Ⅰ lithium bromide absorption heat pump unit 第一类溴化锂吸收式热泵机组 |
China National Standards G |
English PDF |
| GB/T 34623-2017 |
Spindle rod components of cotton pickinG machine 采棉机摘锭座杆组件 |
China National Standards G |
English PDF |
| GB/T 18690.2-2017 |
AGricultural irrigation equipment—Filters for microirrigation—Part 2: Strainer-type filters and disc filters 农业灌溉设备 微灌用过滤器 第2部分：网式过滤器和叠片式过滤器 |
China National Standards G |
English PDF |
| GB/T 10942-2017 |
RefriGerated bulk milk tanks 散装乳冷藏罐 |
China National Standards G |
English PDF |
| GB/T 34630.2-2017 |
Friction stir weldinG—Aluminium and its alloys—Part 2：Design of weld joints 搅拌摩擦焊 铝及铝合金 第2部分：焊接接头设计 |
China National Standards G |
English PDF |
| GB/T 34637-2017 |
Non-destructive testinG—Test methods for bubble leak detection 无损检测 气泡泄漏检测方法 |
China National Standards G |
English PDF |
| GB/T 34443-2017 |
TerminoloGy of artificial leather and synthetic leather 人造革与合成革术语 |
China National Standards G |
English PDF |
| GB/T 34445-2017 |
Test method of hot-tack property for heat sealinG surfaces of thermoplastic polymer and thermoplastic composite material 热塑性塑料及其复合材料热封面热粘性能测定 |
China National Standards G |
English PDF |
| GB/T 3325-2017 |
General technical requirements for metal furniture 金属家具通用技术条件 |
China National Standards G |
English PDF |
| GB/T 19362.2-2017 |
Test conditions for bridGe-type milling machines—Testing of the accuracy—Part 2: Travelling bridge (gantry-type) machines 龙门铣床检验条件 精度检验 第2部分：龙门移动式铣床 |
China National Standards G |
English PDF |
| GB/T 4679-2017 |
DiecastinG dies—Components—Specifications 压铸模 零件 技术条件 |
China National Standards G |
English PDF |
| Find out:40037Items | To Page of: First -Previous-Next -Last | [117] [118] [119] [120] [121] [122] [123] |
+86-755-25831330
