GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 28278.2-2012 |
Plain Bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 2: Characteristic values for calculation of oil-lubricated plain journal bearings without drainage grooves 滑动轴承 稳态条件下不带回油槽流体静压径向滑动轴承 第2部分:不带回油槽油润滑径向滑动轴承计算的特性值 |
China National Standards Bearing |
English PDF |
GB/T 28278.1-2012 |
Plain Bearings - Hydrostatic plain journal bearings without drainage grooves under steady-state conditions - Part 1: Calculation of oil-lubricated plain journal bearings without drainage grooves 滑动轴承 稳态条件下不带回油槽流体静压径向滑动轴承 第1部分:不带回油槽油润滑径向滑动轴承的计算 |
China National Standards Bearing |
English PDF |
GB/T 28268-2012 |
Rolling Bearings - Specifications of pressed cages 滚动轴承 冲压保持架技术条件 |
China National Standards Bearing |
English PDF |
GB/T 2688-2012 |
Plain Bearing - Technical specification of powder metallurgy bearing 滑动轴承 粉末冶金轴承技术条件 |
China National Standards Bearing |
English PDF |
GB/T 2889.4-2011 |
Plain Bearings - Terms, definitions,classification and symbols - Part 4:Basic symbols 滑动轴承 术语、定义和分类 第4部分:基本符号 |
China National Standards Bearing |
English PDF |
GB/T 27939-2011 |
Plain Bearings - Quality control techniques and inspection of geometrical and material quality characteristics 滑动轴承 几何和材料质量特性的质量控制技术和检验 |
China National Standards Bearing |
English PDF |
GB/T 27938-2011 |
Plain Bearings - Thrust washers - Terms, appearance of damage and cause of failure 滑动轴承 止推垫圈 失效损坏术语、外观特征及原因 |
China National Standards Bearing |
English PDF |
GB/T 12613.7-2011 |
Plain Bearings - Wrapped bushes - Part 7:Measurement of wall thickness of thin-walled bushes 滑动轴承 卷制轴套 第7部分:薄壁轴套壁厚测量 |
China National Standards Bearing |
English PDF |
GB/T 12613.6-2011 |
Plain Bearings - Wrapped bushes - Part 6:Checking the inside diameter 滑动轴承 卷制轴套 第6部分:内径检验 |
China National Standards Bearing |
English PDF |
GB/T 12613.5-2011 |
Plain Bearings - Wrapped bushes - Part 5: Checking the outside diameter 滑动轴承 卷制轴套 第5部分:外径检验 |
China National Standards Bearing |
English PDF |
GB/T 12613.4-2011 |
Plain Bearings - Wrapped bushes - Part 4: Materials 滑动轴承 卷制轴套 第4部分:材料 |
China National Standards Bearing |
English PDF |
GB/T 12613.3-2011 |
Plain Bearings - Wrapped bushes - Part 3:Lubrication holes, grooves and indentations 滑动轴承 卷制轴套 第3部分:润滑油孔、油槽和油穴 |
China National Standards Bearing |
English PDF |
GB/T 12613.2-2011 |
Plain Bearings - Wrapped bushes - Part 2: Test data for outside and inside diameters 滑动轴承 卷制轴套 第2部分: 外径和内径的检测数据 |
China National Standards Bearing |
English PDF |
GB/T 12613.1-2011 |
Plain Bearings - Wrapped bushes - Part 1:Dimensions 滑动轴承 卷制轴套 第1部分: 尺寸 |
China National Standards Bearing |
English PDF |
GB/T 27560-2011 |
Rolling Bearings - Cast housings for insert bearings - Specifications 滚动轴承 外球面球轴承铸造座 技术条件 |
China National Standards Bearing |
English PDF |
GB/T 27559-2011 |
Rolling Bearing - Cylindrical roller bearings for spindles of machines 滚动轴承 机床主轴用圆柱滚子轴承 |
China National Standards Bearing |
English PDF |
GB/T 27558-2011 |
Rolling Bearings - Linear motion rolling bearings - Classification 滚动轴承 直线运动滚动支承 分类 |
China National Standards Bearing |
English PDF |
GB/T 27557-2011 |
Rolling Bearings - Linear motion rolling bearings - Identification code 滚动轴承 直线运动滚动支承 代号方法 |
China National Standards Bearing |
English PDF |
GB/T 27556-2011 |
Rolling Bearings - Radial bearings,retaining slots - Dimensions and tolerances 滚动轴承 向心轴承定位槽 尺寸和公差 |
China National Standards Bearing |
English PDF |
GB/T 27555-2011 |
Rolling Bearings - Insert bearing units - Specifications 滚动轴承 带座外球面球轴承 技术条件 |
China National Standards Bearing |
English PDF |
GB/T 27554-2011 |
Rolling Bearings - Insert bearing units - Identification code 滚动轴承 带座外球面球轴承 代号方法 |
China National Standards Bearing |
English PDF |
GB/T 273.1-2011 |
Rolling Bearings-Boundary dimensions general plan-Part 1:Tapered roller bearings 滚动轴承 外形尺寸总方案 第1部分:圆锥滚子轴承 |
China National Standards Bearing |
English PDF |
GB/T 20060-2011 |
Rolling Bearings - Cylindrical roller bearings,separate thrust collars - Boundary dimensions 滚动轴承 圆柱滚子轴承 可分离斜挡圈 外形尺寸 |
China National Standards Bearing |
English PDF |
GB/T 6391-2010 |
Rolling Bearings - Dynamic load ratings and rating life 滚动轴承 额定动载荷和额定寿命 |
China National Standards Bearing |
English PDF |
GB/T 25962-2010 |
Standard test method for determining the leakage tendencies of automotive wheel Bearing grease under accelerated conditions 高速条件下汽车轮毂轴承润滑脂漏失量测定法 |
China National Standards Bearing |
English PDF |
GB 25779-2010 |
LoadBearing concrete perforated bricks 承重混凝土多孔砖 |
China National Standards Bearing |
English PDF |
GB/T 308.2-2010 |
Rolling Bearings - Balls - Part 2: Ceramic balls 滚动轴承 球 第2部分:陶瓷球 |
China National Standards Bearing |
English PDF |
GB/T 25772-2010 |
Rolling Bearings - Bearings for railway passenger coach 滚动轴承 铁路客车轴承 |
China National Standards Bearing |
English PDF |
GB/T 25771-2010 |
Rolling Bearings - Bearings for railway locomotive 滚动轴承 铁路机车轴承 |
China National Standards Bearing |
English PDF |
GB/T 25770-2010 |
Rolling Bearings - Bearings for railway wagon 滚动轴承 铁路货车轴承 |
China National Standards Bearing |
English PDF |
GB/T 25769-2010 |
Rolling Bearings - Measuring methods for radial internal clearance 滚动轴承 径向游隙的测量方法 |
China National Standards Bearing |
English PDF |
GB/T 25768-2010 |
Rolling Bearings - Combined needle roller bearings with double direction thrust cylindrical roller bearings 滚动轴承 滚针和双向推力圆柱滚子组合轴承 |
China National Standards Bearing |
English PDF |
GB/T 25767-2010 |
Rolling Bearings - Tapered rollers 滚动轴承 圆锥滚子 |
China National Standards Bearing |
English PDF |
GB/T 25766-2010 |
Rolling Bearings - Insert bearings - Radial internal clearance 滚动轴承 外球面球轴承 径向游隙 |
China National Standards Bearing |
English PDF |
GB/T 25765-2010 |
Rolling Bearings - Ball bearings for automobile transmission 滚动轴承 汽车变速箱用球轴承 |
China National Standards Bearing |
English PDF |
GB/T 25764-2010 |
Rolling Bearings - Roller bearings for automobile transmission 滚动轴承 汽车变速箱用滚子轴承 |
China National Standards Bearing |
English PDF |
GB/T 25763-2010 |
Rolling Bearings - Needle roller bearings for automotive transmission 滚动轴承 汽车变速箱用滚针轴承 |
China National Standards Bearing |
English PDF |
GB/T 25762-2010 |
Rolling Bearings - Needle roller and cage assemblies for motorcycle connecting rod 滚动轴承 摩托车连杆支承用滚针和保持架组件 |
China National Standards Bearing |
English PDF |
GB/T 25761-2010 |
Rolling Bearings - Combined needle roller bearings with angular contact ball bearings - Boundary dimensions 滚动轴承 滚针和角接触球组合轴承 外形尺寸 |
China National Standards Bearing |
English PDF |
GB/T 25760-2010 |
Rolling Bearings - Combined needle roller bearings with thrust ball bearings - Boundary dimensions 滚动轴承 滚针和推力球组合轴承 外形尺寸 |
China National Standards Bearing |
English PDF |
GB/T 25510-2010 |
Mechanical systems and components for general use - Reference dictionary for rolling Bearings 机械系统和通用件 滚动轴承参考字典 |
China National Standards Bearing |
English PDF |
GB/T 24610.4-2009 |
Rolling Bearings - Measuring methods for vibration - Part 4: Radial cylindrical roller bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第4部分:具有圆柱孔和圆柱外表面的圆柱滚子轴承 |
China National Standards Bearing |
English PDF |
GB/T 24611-2009 |
Rolling Bearings - Damage and failures - Terms,characteristics and causes 滚动轴承 损伤和失效 术语、特征及原因 |
China National Standards Bearing |
English PDF |
GB/T 24610.3-2009 |
Rolling Bearings - Measuring methods for vibration - Part 3: Radial spherical and tapered roller bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第3部分:具有圆柱孔和圆柱外表面的调心滚子轴承和圆锥滚子轴承 |
China National Standards Bearing |
English PDF |
GB/T 24610.2-2009 |
Rolling Bearings - Measuring methods for vibration - Part 2: Radial ball bearings with cylindrical bore and outside surface 滚动轴承 振动测量方法 第2部分:具有圆柱孔和圆柱外表面的向心球轴承 |
China National Standards Bearing |
English PDF |
GB/T 24610.1-2009 |
Rolling Bearings - Measuring methods for vibration - Part 1: Fundamentals 滚动轴承 振动测量方法 第1部分:基础 |
China National Standards Bearing |
English PDF |
GB/T 24609-2009 |
Rolling Bearings - Thermal speed rating - Calculation and coefficients 滚动轴承 额定热转速 计算方法和系数 |
China National Standards Bearing |
English PDF |
GB/T 24608-2009 |
Inspection rules for rolling Bearings and commercial parts 滚动轴承及其商品零件检验规则 |
China National Standards Bearing |
English PDF |
GB/T 24607-2009 |
Rolling Bearings - Test and assessment for life and reliability 滚动轴承 寿命与可靠性试验及评定 |
China National Standards Bearing |
English PDF |
GB/T 24606-2009 |
Rolling Bearings - Non-destructive testing - Magnetic particle testing 滚动轴承 无损检测 磁粉检测 |
China National Standards Bearing |
English PDF |
GB/T 24605-2009 |
Rolling Bearings - Marking for products 滚动轴承 产品标志 |
China National Standards Bearing |
English PDF |
GB/T 24604-2009 |
Rolling Bearings - Angular contact thrust ball bearings used for machine tool 滚动轴承 机床丝杠用推力角接触球轴承 |
China National Standards Bearing |
English PDF |
GB/T 12764-2009 |
Rolling Bearings - Needle roller bearings,drawn cup without inner ring - Boundary dimensions and tolerances 滚动轴承 无内圈、冲压外圈滚针轴承 外形尺寸和公差 |
China National Standards Bearing |
English PDF |
GB/T 24495-2009 |
Horizontal joints between load-Bearing walls and concrete floors - Laboratory mechanical tests - Effect of vertical loading and of moments transmitted by the floors 承重墙与混凝土楼板间的水平接缝 实验室力学试验 由楼板传来的垂直荷载和弯矩的影响 |
China National Standards Bearing |
English PDF |
GB/T 24492-2009 |
Nonload Bearing concrete hollow brick 非承重混凝土空心砖 |
China National Standards Bearing |
English PDF |
GB/T 23896-2009 |
Plain Bearings - Quality assurance of thin - Walled half bearings - Design FMEA 滑动轴承 薄壁轴瓦质量保证 设计阶段的失效模式和效应分析(FMEA) |
China National Standards Bearing |
English PDF |
GB/T 23895-2009 |
Plain Bearings - Quality assurance of thin-walled half bearings - Selective assembly of bearings to achieve a narrow clearance 滑动轴承 薄壁轴瓦质量保证 缩小轴承间隙范围的选择装配 |
China National Standards Bearing |
English PDF |
GB/T 23894-2009 |
Plain Bearing - Copper alloy bearing with solid lubricant 滑动轴承 铜合金镶嵌固体润滑轴承 |
China National Standards Bearing |
English PDF |
GB/T 23893-2009 |
Thermoplastic polymers for plain Bearings - Classification and designation 滑动轴承用热塑性聚合物 分类和标记 |
China National Standards Bearing |
English PDF |
GB/T 23892.3-2009 |
Plain Bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 3: Guide values for the calculation of tilting pad thrust bearings 滑动轴承 稳态条件下流体动压可倾瓦块止推轴承 第3部分:可倾瓦块止推轴承计算的许用值 |
China National Standards Bearing |
English PDF |
GB/T 23892.2-2009 |
Plain Bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 2: Functions for calculation of tilting pad thrust bearings 滑动轴承 稳态条件下流体动压可倾瓦块止推轴承 第2部分:可倾瓦块止推轴承的计算函数 |
China National Standards Bearing |
English PDF |
GB/T 23892.1-2009 |
Plain Bearings - Hydrodynamic plain tilting pad thrust bearings under steady-state conditions - Part 1: Calculation of tilting pad thrust bearings 滑动轴承 稳态条件下流体动压可倾瓦块止推轴承 第1部分:可倾瓦块止推轴承的计算 |
China National Standards Bearing |
English PDF |
GB/T 23891.3-2009 |
Plain Bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 3: Guide values for the calculation of thrust pad bearings 滑动轴承 稳态条件下流体动压瓦块止推轴承 第3部分:瓦块止推轴承计算的许用值 |
China National Standards Bearing |
English PDF |
GB/T 23891.2-2009 |
Plain Bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 2: Functions for the calculation of thrust pad bearings 滑动轴承 稳态条件下流体动压瓦块止推轴承 第2部分:瓦块止推轴承的计算函数 |
China National Standards Bearing |
English PDF |
GB/T 23891.1-2009 |
Plain Bearings - Hydrodynamic plain thrust pad bearings under steady-state conditions - Part 1: Calculation of thrust pad bearings 滑动轴承 稳态条件下流体动压瓦块止推轴承 第1部分:瓦块止推轴承的计算 |
China National Standards Bearing |
English PDF |
GB/T 18325.4-2009 |
Plain Bearings - Bearing fatigue - Part 4: Test on half-bearings of a metallic multilayer bearing materials 滑动轴承 轴承疲劳 第4部分:金属多层轴承材料轴瓦试验 |
China National Standards Bearing |
English PDF |
GB/T 18325.3-2009 |
Plain Bearing - Bearing fatigue - Part 3: Test on plain strips of a metallic multilayer bearing material 滑动轴承 轴承疲劳 第3部分:金属多层轴承材料平带试验 |
China National Standards Bearing |
English PDF |
GB/T 18325.2-2009 |
Plain Bearing - Bearing fatigue - Part 2: Test with a cylindrical specimen of a metallic bearing material 滑动轴承 轴承疲劳 第2部分:金属轴承材料圆柱形试样试验 |
China National Standards Bearing |
English PDF |
GB/T 23564.4-2009 |
Ball-Bearing guide steel-plate punch holders of stamping dies - Part 4: Four-pillar punch holders 冲模滚动导向钢板上模座 第4部分:四导柱上模座 |
China National Standards Bearing |
English PDF |
GB/T 23564.3-2009 |
Ball-Bearing guide steel-plate punch holders of stamping dies - Part 3: Center-pillar punch holders 冲模滚动导向钢板上模座 第3部分:中间导柱上模座 |
China National Standards Bearing |
English PDF |
GB/T 23564.2-2009 |
Ball-Bearing guide steel-plate punch holders of stamping dies - Part 2: Diagonal-pillar punch holders 冲模滚动导向钢板上模座 第2部分:对角导柱上模座 |
China National Standards Bearing |
English PDF |
GB/T 23564.1-2009 |
Ball-Bearing guide steel-plate punch holders of stamping dies - Part 1: Rear-pillar punch holders 冲模滚动导向钢板上模座 第1部分:后侧导柱上模座 |
China National Standards Bearing |
English PDF |
GB/T 23563.4-2009 |
Ball-Bearing guide steel-plate die sets of stamping dies - Part 4: Four-pillar die sets 冲模滚动导向钢板模架 第4部分:四导柱模架 |
China National Standards Bearing |
English PDF |
GB/T 23563.3-2009 |
Ball-Bearing guide steel-plate die sets of stamping dies - Part 3: Center-pillar die sets 冲模滚动导向钢板模架 第3部分:中间导柱模架 |
China National Standards Bearing |
English PDF |
GB/T 23563.2-2009 |
Ball-Bearing guide steel-plate die sets of stamping dies - Part 2: Diagonal-pillar die sets 冲模滚动导向钢板模架 第2部分:对角导柱模架 |
China National Standards Bearing |
English PDF |
GB/T 23563.1-2009 |
Ball-Bearing guide steel-plate die sets of stamping dies - Part 1: Rear-pillar die sets 冲模滚动导向钢板模架 第1部分:后侧导柱模架 |
China National Standards Bearing |
English PDF |
GB/T 17955-2009 |
Spherical Bearings for bridges 桥梁球型支座 |
China National Standards Bearing |
English PDF |
GB/T 22515-2008 |
Terminology of grain and oil - Grain and oil-Bearing material and their prouducts 粮油名词术语 粮食、油料及其加工产品 |
China National Standards Bearing |
English PDF |
GB/T 3086-2008 |
High carbon chromium stainless Bearing steels 高碳铬不锈轴承钢 |
China National Standards Bearing |
English PDF |
GB/T 7308-2008 |
Plain Bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test 滑动轴承 有法兰或无法兰薄壁轴瓦 公差、结构要素和检验方法 |
China National Standards Bearing |
English PDF |
GB/T 2889.1-2008 |
Plain Bearings - Terms, definitions and classification - Part 1: Design, bearing materials and their properties 滑动轴承 术语、定义和分类 第1部分:设计、轴承材料及其性能 |
China National Standards Bearing |
English PDF |
GB/T 10447-2008 |
Plain Bearings - Pressed bimetallic half thrust washers - Features and tolerances 滑动轴承 半圆止推垫圈 要素和公差 |
China National Standards Bearing |
English PDF |
GB/T 10446-2008 |
Plain Bearings - Ring type thrust washers - Dimensions and tolerances 滑动轴承 整圆止推垫圈 尺寸和公差 |
China National Standards Bearing |
English PDF |
GB/T 14484-2008 |
Plastics - Determination of Bearing strength 塑料 承载强度的测定 |
China National Standards Bearing |
English PDF |
GB/T 14364-2008 |
Sliding intermediate shaft Bearing of marine shafting 船舶轴系滑动式中间轴承 |
China National Standards Bearing |
English PDF |
GB/T 9978.9-2008 |
Fire-resistance tests - Elements of building construction - Part 9: Specific requirements for non-loadBearing ceiling elements 建筑构件耐火试验方法 第9部分:非承重吊顶构件的特殊要求 |
China National Standards Bearing |
English PDF |
GB/T 9978.8-2008 |
Fire-resistance tests - Elements of building construction - Part 8: Specific requirements for non-loadBearing vertical separating elements 建筑构件耐火试验方法 第8部分:非承重垂直分隔构件的特殊要求 |
China National Standards Bearing |
English PDF |
GB/T 9978.5-2008 |
Fire-resistance tests-Elements of building construction-Part 5: Specific requirements for loadBearing horizontal separating elements 建筑构件耐火试验方法 第5部分:承重水平分隔构件的特殊要求 |
China National Standards Bearing |
English PDF |
GB/T 9978.4-2008 |
Fire-resistance tests-Elements of building construction-Part 4: Specific requirements for loadBearing vertical separating elements 建筑构件耐火试验方法 第4部分:承重垂直分隔构件的特殊要求 |
China National Standards Bearing |
English PDF |
GB/T 21897-2008 |
Load-Bearing waterproof sheet 承载防水卷材 |
China National Standards Bearing |
English PDF |
GB/T 5686.7-2008 |
Ferromanganese, ferromanganese-silicon,, nitrogen-Bearing ferromanganese and manganese metal - Determination of sulfur content - Infrared absorption method and combustion-neutralization method 锰铁、锰硅合金、氮化锰铁和金属锰 硫含量的测定 红外线吸收法和燃烧中和滴定法 |
China National Standards Bearing |
English PDF |
GB/T 5686.5-2008 |
Ferromanganese, ferromanganese-silicon , nitrogen-Bearing ferromanganese and manganese metal - Determination of carbon content - The infrared absorption method ,the gasometric method ,the gravimetric and the coulometric method 锰铁、锰硅合金、氮化锰铁和金属锰 碳含量的测定 红外线吸收法、气体容量法、重量法和库仑法 |
China National Standards Bearing |
English PDF |
GB/T 5686.4-2008 |
Ferromanganese , ferromanganese-silicon , itrogen-Bearing ferromanganese and manganese metal - Determination of phosphorus content - Molybdenum blue photometric method and alkali content titrimetric method 锰铁、锰硅合金、氮化锰铁和金属锰 磷含量的测定 钼蓝光度法和碱量滴定法 |
China National Standards Bearing |
English PDF |
GB/T 5686.2-2008 |
Ferromanganese,ferromanganese-silicon , nitrogen-Bearing ferromanganese and manganese metal - Determination of silicon content - Molybdenum blue photometric method ,silicon potassium fluoride titrimetric method and perchloric acid dehydration gravimet 锰铁、锰硅合金、氮化锰铁和金属锰 硅含量的测定 钼蓝光度法、氟硅酸钾滴定法和高氯酸重量法 |
China National Standards Bearing |
English PDF |
GB/T 5686.1-2008 |
Ferromanganese,ferromanganese-silicon, nitrogen-Bearing ferromanganese and manganese metal - Determination of manganese content - Potentiometric method and titrimetric mothod after ammonium nitrate & perchloric acid oxidation 锰铁、锰硅合金、氮化锰铁和金属锰 锰含量的测定 电位滴定法、硝酸铵氧化滴定法及高氯酸氧化滴定法 |
China National Standards Bearing |
English PDF |
GB/T 2861.8-2008 |
Guide unit for stamping dies - Part 8: Guide pillars with taper lead for ball-Bearing 冲模导向装置 第8部分:滚动导向可卸导柱 |
China National Standards Bearing |
English PDF |
GB/T 2861.4-2008 |
Guide unit for stamping dies - Part 4: Guide bushes for ball-Bearing 冲模导向装置 第4部分:滚动导向导套 |
China National Standards Bearing |
English PDF |
GB/T 2861.2-2008 |
Guide unit for stamping dies - Part 2: Guide pillars for ball-Bearing 冲模导向装置 第2部分:滚动导向导柱 |
China National Standards Bearing |
English PDF |
GB/T 2856.2-2008 |
Holders for ball-Bearing die sets for stamping dies - Part 2: Die holders for die sets 冲模滚动导向模座 第2部分:下模座 |
China National Standards Bearing |
English PDF |
GB/T 2856.1-2008 |
Holders for ball-Bearing die sets for stamping dies - Part 1: Punch holders for die sets 冲模滚动导向模座 第1部分:上模座 |
China National Standards Bearing |
English PDF |
Find out:390Items | To Page of: First -Previous-Next -Last | 1 2 3 4 |