GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 15773-2008 |
Regulation of aCCeptance for comprehensive control of soil and water conservation 水土保持综合治理 验收规范 |
China National Standards CC |
English PDF |
GB 50461-2008 |
Code for quality aCCeptance of static equipment installation in petrochemical engineering 石油化工静设备安装工程施工质量验收规范 |
China National Standards CC |
English PDF |
GB/T 22491-2008 |
Soybean oligosaCCharide 大豆低聚糖 |
China National Standards CC |
English PDF |
GB/T 14173-2008 |
Specification for manufacture, installation and aCCeptance of steel gate in hydraulic and hydroelectric engineering 水利水电工程钢闸门制造、安装及验收规范 |
China National Standards CC |
English PDF |
GB/T 10361-2008 |
Wheat, rye and respective flours, durum wheat and durum wheat semolina - Determination of the falling number aCCording to Hagberg-Perten 小麦、黑麦及其面粉,杜伦麦及其粗粒粉 降落数值的测定 Hagberg-Perten法 |
China National Standards CC |
English PDF |
GB 3836.12-2008 |
Explosive atmospheres - Part 12: Classification of gases or vapours with air aCCording to their maximum experimental safe gaps and minimum igniting current 爆炸性环境 第12部分:气体或蒸气混合物按照其最大试验安全间隙和最小点燃电流的分级 |
China National Standards CC |
English PDF |
GB/T 8241-2008 |
Terminology for ship aCCommodation equipment 船舶舱室设备术语 |
China National Standards CC |
English PDF |
GB 50268-2008 |
Code for construction and aCCeptance of water and sewerage pipeline works 给水排水管道工程施工及验收规范 |
China National Standards CC |
English PDF |
GB 50141-2008 |
Code for construction and aCCeptance of water and sewerage structures 给水排水构筑物工程施工及验收规范 |
China National Standards CC |
English PDF |
GB/T 13823.20-2008 |
Methods for the calibration of vibration and shock pick-ups - ACCelerometer resonance testing - General methods 振动与冲击传感器校准方法 加速度计谐振测试 通用方法 |
China National Standards CC |
English PDF |
GB/T 22385-2008 |
Specification for aCCeptance of dam safety monitoring system 大坝安全监测系统验收规范 |
China National Standards CC |
English PDF |
GB/T 12772-2008 |
Cast iron pipes、fittings and aCCessories with flexible joint sewerage for drainage 排水用柔性接口铸铁管、管件及附件 |
China National Standards CC |
English PDF |
GB/T 22298-2008 |
Textile machinery and aCCessories - Numbering of heald frames and drop wire bars in a loom 纺织机械与附件 织机综框和停经条的编号 |
China National Standards CC |
English PDF |
GB/T 22297-2008 |
Textile machinery and aCCessories - Dyeing and finishing machinery - Vocabulary of ancillary devices 纺织机械与附件 染整机器辅助装置 词汇 |
China National Standards CC |
English PDF |
GB/T 9640-2008 |
Flexible and rigid cellular polymeric materials - ACCelerated ageing tests 软质和硬质泡沫聚合材料 加速老化试验方法 |
China National Standards CC |
English PDF |
GB/T 22365-2008 |
Paper and board - Determination of printing surface strength - ACCelerating speed method 纸和纸板印刷表面强度的测定 |
China National Standards CC |
English PDF |
GB/T 2103-2008 |
General requirements for aCCeptance,packing,marking and quality certification of steel wire 钢丝验收、包装、标志及质量证明书的一般规定 |
China National Standards CC |
English PDF |
GB 50444-2008 |
Code for aCCeptance and inspection of extinguisher distribution in buildings 建筑灭火器配置验收及检查规范 |
China National Standards CC |
English PDF |
GB/T 5289.1-2008 |
Machine tools - Test conditions for testing the aCCuracy of boring and milling machines with horizontal spindle - Part 1: Machines with fixed column and movable table 卧式铣镗床精度检验条件 第1部分:固定立柱和移动式工作台机床 |
China National Standards CC |
English PDF |
GB/T 4686-2008 |
Gear shaping machines - Testing of the aCCuracy 插齿机 精度检验 |
China National Standards CC |
English PDF |
GB/T 15376-2008 |
Wookworking machines - Turning lathes - Nomenclature and aCCeptance conditions 木工机床 普通车床 术语和精度 |
China National Standards CC |
English PDF |
GB/T 14303-2008 |
Wookworking machines - Single blade circular saw benches with or without travelling table - Nomenclature and aCCeptance conditions 木工机床 单锯片圆锯机 术语和精度 |
China National Standards CC |
English PDF |
GB/T 13572-2008 |
Wookworking machines - Planing machines for two-,three,or four-side dressing - Nomenclature and aCCetpance conditions 木工机床 二、三、四面刨床 术语和精度 |
China National Standards CC |
English PDF |
GB/T 13393-2008 |
Guide to aCCeptance sampling inspection 验收抽样检验导则 |
China National Standards CC |
English PDF |
GB/T 13304.2-2008 |
Steels classification - Part 2: Classification of aCCording to main quality classes and main property or application characteristics 钢分类 第2部分:按主要质量等级和主要性能或使用特性的分类 |
China National Standards CC |
English PDF |
GB/T 13304.1-2008 |
Steels classification - Part 1: Classification of aCCording to chemical composition 钢分类 第1部分:按化学成分分类 |
China National Standards CC |
English PDF |
GB/T 15805.4-2008 |
The quarantine methods of fish - Part 4: Channel catfish virus (CCV) 鱼类检疫方法 第4部分:斑点叉尾鮰病毒(CCV) |
China National Standards CC |
English PDF |
GB/T 6378.1-2008 |
Sampling procedures for inspection by variables - Part 1: Specification for single sampling plans indexed by aCCeptance quality limit (AQL) for lot-by-lot inspection for a single quality characteristic and a single AQL 计量抽样检验程序 第1部分:按接收质量限(AQL)检索的对单一质量特性和单个AQL的逐批检验的一次抽样方案 |
China National Standards CC |
English PDF |
GB/T 22198-2008 |
ACCeptance tests for steam turbine speed control systems 汽轮机转速控制系统验收试验 |
China National Standards CC |
English PDF |
GB/T 22192-2008 |
Electrical installations in ships - Equipment - ACCumulator(storage)batteries 船舶电气设备 设备 蓄电池 |
China National Standards CC |
English PDF |
GB/T 22191-2008 |
Electrical installations in ships - Equipment - Luminaires and aCCessories 船舶电气设备 设备 灯具和附件 |
China National Standards CC |
English PDF |
GB/T 5701-2008 |
Thermal environmental conditions for human oCCupancy 室内热环境条件 |
China National Standards CC |
English PDF |
GB/T 10001.9-2008 |
Public information graphical symbols for use on sign - Part 9: Symbols for aCCessible facilities 标志用公共信息图形符号 第9部分: 无障碍设施符号 |
China National Standards CC |
English PDF |
GB/T 7121.2-2008 |
The strength testing method and aCCepting condition of the protective structures on wheeled agricultural and forestry tractors - Part 2: Dynamic testing method 农林轮式拖拉机防护装置强度试验方法和验收条件 第2部分:后置式动态试验方法 |
China National Standards CC |
English PDF |
GB/T 8117.2-2008 |
Rules for steam turbine thermal aCCeptance tests - Part 2: Method B - Wide range of accuracy for various types and sizes of turbines 汽轮机热力性能验收试验规程 第2部分: 方法B 各种类型和容量的汽轮机宽准确度试验 |
China National Standards CC |
English PDF |
GB/T 8117.1-2008 |
Rules for steam turbine thermal aCCeptance tests - Part 1: Method A - High accuracy for large condensing steam turbines 汽轮机热力性能验收试验规程 第1部分: 方法A 大型凝汽式汽轮机高准确度试验 |
China National Standards CC |
English PDF |
GB/T 18316-2008 |
Specifications for inspection and aCCeptance of quality of digital surveying and mapping achievements 数字测绘成果质量检查与验收 |
China National Standards CC |
English PDF |
GB/T 9326.5-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and aCCessories for alternating voltages up to and including 500kV - Part 5: Pressure tanks 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第5部分: 压力供油箱 |
China National Standards CC |
English PDF |
GB/T 9326.4-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and aCCessories for alternating voltages up to and including 500kV - Part 4: Joint 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第4部分: 接头 |
China National Standards CC |
English PDF |
GB/T 9326.3-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and aCCessories for alternating voltages up to and including 500kV - Part 3: Sealing end 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第3部分: 终端 |
China National Standards CC |
English PDF |
GB/T 9326.2-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and aCCessories for alternating voltages up to and including 500kV - Part 2:Oil-filled paper insulated, lead-sheathed cables for alternating voltages up to and including 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第2部分: 交流500kV及以下纸绝缘铅套充油电缆 |
China National Standards CC |
English PDF |
GB/T 9326.1-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and aCCessories for alternating voltages up to and including 500kV - Part 1: Test 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第1部分: 试验 |
China National Standards CC |
English PDF |
GB/T 22079-2008 |
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definitions, test methods and aCCeptance criteria 标称电压高于1000V使用的户内和户外聚合物绝缘子 一般定义、试验方法和接收准则 |
China National Standards CC |
English PDF |
GB/T 22078.3-2008 |
Power cables with cross-linked polyethylene insulation and theiraCCessories for rated voltage of 500kV(Um=550kV) - Part 3: Accessories for power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第3部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆附件 |
China National Standards CC |
English PDF |
GB/T 22078.2-2008 |
Power cables with cross-linked polyethylene insulation and their aCCessories for rated voltage of 500kV (Um=550kV) - Part2: Power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第2部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆 |
China National Standards CC |
English PDF |
GB/T 22078.1-2008 |
Power cables with cross-linked polyethylene insulation and their aCCessories for rated voltage of 500kV(Um=550kV) - Part 1: Power cable systems-cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV (Um=550kV) - 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第1部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 试验方法和要求 |
China National Standards CC |
English PDF |
GB/T 15613.3-2008 |
Model aCCeptance tests of hydraulic turbines, storage pumps and pump-turbine - Part 3: Additional performance test 水轮机、蓄能泵和水泵水轮机模型验收试验 第3部分:辅助性能试验 |
China National Standards CC |
English PDF |
GB/T 15613.2-2008 |
Model aCCeptance tests of hydraulic turbines, storage pumps and pump-turbine - Part 2: Main hydraulic performance test 水轮机、蓄能泵和水泵水轮机模型验收试验 第2部分:常规水力性能试验 |
China National Standards CC |
English PDF |
GB/T 15613.1-2008 |
Model aCCeptance tests of hydraulic turbines, storage pumps and pump-turbines - Part 1: General rules 水轮机、蓄能泵和水泵水轮机模型验收试验 第1部分: 通用规定 |
China National Standards CC |
English PDF |
GB/T 12976.3-2008 |
Paper-insulated power cables and their aCCessories with rated voltages up to and including 35kV - Part 3: Test on cables and their accessories 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第3部分:电缆和附件试验 |
China National Standards CC |
English PDF |
GB/T 12976.2-2008 |
Paper-insulated power cables and their aCCessories with rated voltages up to and including 35kV - Part 2: General and construction requirements for power cables with rated voltages 35kV 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第2部分:额定电压35kV电缆一般规定和结构要求 |
China National Standards CC |
English PDF |
GB/T 12976.1-2008 |
Paper-insulated power cables and their aCCessories with rated voltages up to and including 35kV - Part 1: General and construction requirements for power cables with rated voltages up to and including 30kV 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第1部分:额定电压30kV及以下电缆一般规定和结构要求 |
China National Standards CC |
English PDF |
GB/T 13283-2008 |
ACCuracy class of measuring instruments and display instruments for industrial process measurement and control 工业过程测量和控制用检测仪表和显示仪表精确度等级 |
China National Standards CC |
English PDF |
GB/T 22140-2008 |
Gode for field aCCeptance test of small hydro turbines 小型水轮机现场验收试验规程 |
China National Standards CC |
English PDF |
GB/T 6567.5-2008 |
Technical drawings - Graphical symbols for piping systems - Axonometric representation of graphical symbols for piping, piping aCCessories and valves etc. 技术制图 管路系统的图形符号 管路、管件和阀门等图形符号的轴测图画法 |
China National Standards CC |
English PDF |
GB/T 6567.3-2008 |
Technical drawings - Graphical symbols for piping systems - Piping aCCessories 技术制图 管路系统的图形符号 管件 |
China National Standards CC |
English PDF |
GB/T 22098-2008 |
Practical guidance of HACCP for breweries 啤酒企业HACCP实施指南 |
China National Standards CC |
English PDF |
GB 16916.22-2008 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 22:Applicability of the general rules to RCCB functionally dependent of line voltage 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第22部分:一般规则对动作功能与电源电压有关的RCCB的适用性 |
China National Standards CC |
English PDF |
GB 16916.21-2008 |
Residual current operated circuit-breakers without integral overcurrent protection for household and similar uses (RCCB) - Part 21:Applicability of the general rules to RCCB functionally independent of line voltage 家用和类似用途的不带过电流保护的剩余电流动作断路器(RCCB) 第21部分:一般规则对动作功能与电源电压无关的RCCB的适用性 |
China National Standards CC |
English PDF |
GB 15934-2008 |
Electrical aCCessories - Cord sets and interconnection cord sets 电器附件 电线组件和互连电线组件 |
China National Standards CC |
English PDF |
GB/T 22029-2008 |
Hot-dip galvanized screw threads - On external screw threads there is the clearance for aCCommodating the hot-dip galvanized coat 热浸镀锌螺纹 在外螺纹上容纳镀锌层 |
China National Standards CC |
English PDF |
GB/T 22028-2008 |
Hot-dip galvanized screw threads - On internal screw threads there is the clearance for aCCommodating the hot-dip galvanized coat 热浸镀锌螺纹 在内螺纹上容纳镀锌层 |
China National Standards CC |
English PDF |
GB/T 3903.21-2008 |
Footwear - Test methods for aCCessories:Touch and close fasteners - Shear strength before and after repeated closing 鞋类 粘扣带试验方法 反复开合前后的剪切强度 |
China National Standards CC |
English PDF |
GB/T 3903.20-2008 |
Footwear - Test methods for aCCessories:Touch and close fasteners - Peel strength before and after repeated closing 鞋类 粘扣带试验方法 反复开合前后的剥离强度 |
China National Standards CC |
English PDF |
GB/T 3903.19-2008 |
Footwear - Test methods for aCCessories:Metallic accessories - Corrosion resistance 鞋类 金属附件试验方法 耐腐蚀性 |
China National Standards CC |
English PDF |
GB/T 11409-2008 |
Test methods rubber antiagers and vulcanizing aCCelerators 橡胶防老剂、硫化促进剂 试验方法 |
China National Standards CC |
English PDF |
GB/T 17152-2008 |
Freight costs code(FCC)- Harmonization of the description of freight costs and other charges 运费代码(FCC) 运费和其他费用的统一描述 |
China National Standards CC |
English PDF |
GB/T 12967.3-2008 |
Test Methods for anodic oxidation coatings of aluminium and aluminium alloys - Part 3 : Copper aCCelerated acetic acid salt spray test(CASS test) 铝及铝合金阳极氧化膜检测方法 第3部分:铜加速乙酸盐雾试验(CASS试验) |
China National Standards CC |
English PDF |
GB/T 9487-2008 |
Diesel engines - Exhaust gas measurement under free aCCeleration 柴油机自由加速排气烟度的测量方法 |
China National Standards CC |
English PDF |
GB/T 7121.1-2008 |
The strength testing method and aCCepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法 |
China National Standards CC |
English PDF |
GB/T 21960-2008 |
The testing method and aCCepting condition of the driver’s seat on agricultural and forestry tractors 农林拖拉机驾驶座试验方法和验收条件 |
China National Standards CC |
English PDF |
GB/T 21956.3-2008 |
The strength testing method and aCCepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法 |
China National Standards CC |
English PDF |
GB/T 21956.2-2008 |
The strength testing method and aCCepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法 |
China National Standards CC |
English PDF |
GB/T 21956.1-2008 |
The strength testing method and aCCepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法 |
China National Standards CC |
English PDF |
GB/T 21949.1-2008 |
CNC universal tool milling machines - Part 1: Testing of the aCCuracy 数控万能工具铣床 第1部分:精度检验 |
China National Standards CC |
English PDF |
GB/T 21948.2-2008 |
Test conditions for CNC milling machines with table of variable height - Testing of aCCuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards CC |
English PDF |
GB/T 21948.1-2008 |
Test conditions for CNC milling machines with table of variable height - Testing of aCCuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards CC |
English PDF |
GB/T 21947-2008 |
Numerically milling machines for special screws - Testing of the aCCuracy 数控异型螺杆铣床 精度检验 |
China National Standards CC |
English PDF |
GB/T 21946-2008 |
Numerical control gear shaving machines - Testing of the aCCuracy 数控剃齿机 精度检验 |
China National Standards CC |
English PDF |
GB/T 21945-2008 |
Numerical control sector gear shaping machines - Testing of the aCCuracy 数控扇形齿轮插齿机 精度检验 |
China National Standards CC |
English PDF |
GB/T 22023-2008 |
ACCeptance specification of ultra high temperature sterilizing equipment for liquid food 液体食品超高温瞬时灭菌(UHT)设备验收规范 |
China National Standards CC |
English PDF |
GB/T 21965-2008 |
Steel wire ropes - Vocabulary for aCCeptance and defect 钢丝绳 验收及缺陷术语 |
China National Standards CC |
English PDF |
GB 7260.4-2008 |
Uninterruptible Power Systems(UPS) - Part 1-2: General and safety requirements for UPS used in restricted aCCess locations 不间断电源设备 第1-2部分:限制触及区使用的UPS的一般规定和安全要求 |
China National Standards CC |
English PDF |
GB 7260.1-2008 |
Uninterruptible power systems(UPS) - Part 1-1: General and safety requirements for UPS used in operator aCCess areas 不间断电源设备 第1-1部分: 操作人员触及区使用的UPS的一般规定和安全要求 |
China National Standards CC |
English PDF |
GB/T 21840-2008 |
Vulcanizing aCCelerator TBBS 硫化促进剂 TBBS |
China National Standards CC |
English PDF |
GB/T 18013-2008 |
Raw natural rubber - Determination of aCCelerated storage-hardening number 天然生胶 加速贮存硬化值的测定 |
China National Standards CC |
English PDF |
GB/T 2101-2008 |
General requirement of aCCeptance, packaging, marking, and certification for section steel 型钢验收、包装、标志及质量证明书的一般规定 |
China National Standards CC |
English PDF |
GB/T 13924-2008 |
Inspection code for aCCuracy of involute cylindrical gears 渐开线圆柱齿轮精度 检验细则 |
China National Standards CC |
English PDF |
GB/T 16259-2008 |
Test method for in aCCel erated weathering building materials 建筑材料人工气候加速老化试验方法 |
China National Standards CC |
English PDF |
GB/T 21686-2008 |
Woodworking machines - Slot mortising machines - Nomenclature and aCCeptance conditions 木工机床 卧式榫槽机 术语和精度 |
China National Standards CC |
English PDF |
GB/T 21684-2008 |
Woodworking machines - Two-, three- and four-side moulding machines - Nomenclature and aCCeptance conditions 木工机床 二、三、四面铣床 术语和精度 |
China National Standards CC |
English PDF |
GB/T 14386-2008 |
Woodworking machines - Surface planing and thicknessing machines - Nomenclature and aCCeptance conditions 木工机床 平压两用刨床 术语和精度 |
China National Standards CC |
English PDF |
GB/T 14385-2008 |
Woodworking machines - Thickness planing machines with rotary cutterblock for one-side dressing - Nomenclature and aCCeptance conditions 木工机床 单面压刨床 术语和精度 |
China National Standards CC |
English PDF |
GB/T 13571-2008 |
Woodworking machines - Single spindle boring machines - Nomenclature and aCCeptance conditions 木工机床 单轴钻床 术语和精度 |
China National Standards CC |
English PDF |
GB/T 13570-2008 |
Woodworking machines - Single spindle moulding machines - Nomenclature and aCCeptance conditions 木工机床 单轴铣床 术语和精度 |
China National Standards CC |
English PDF |
GB/T 13569-2008 |
Woodworking machines - Surface planing machines with cutterblock for one-side dressing - Nomenclature and aCCeptance conditions 木工机床 平刨床 术语和精度 |
China National Standards CC |
English PDF |
GB/T 13568-2008 |
Woodworking machines - Table bandsawing machines - Nomenclature and aCCeptance conditions 木工机床 细木工带锯机 术语和精度 |
China National Standards CC |
English PDF |
GB/T 21671-2008 |
ACCeptance test specification for Local Area Network (LAN) systems based on ethernet technology 基于以太网技术的局域网系统验收测评规范 |
China National Standards CC |
English PDF |
GB/T 21678-2008 |
Calculating methods on the economic loss of fishery pollution aCCidents 渔业污染事故经济损失计算方法 |
China National Standards CC |
English PDF |
GB/T 22838.17-2009 |
Determination of physical characteristics for cigarettes and filter rods - Part 17: Cigarettes - Determination of loss of tobaCCo from the ends - Method using a vibro-bench 卷烟和滤棒物理性能的测定 第17部分:卷烟 端部掉落烟丝的测定 振动法 |
China National Standards CC |
English PDF |
Find out:1691Items | To Page of: First -Previous-Next -Last | [6] [7] [8] [9] [10] [11] [12] |