GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 2424.2-2005 |
Environmental Testing for electric and electronic products -- GuidanCE for damp heat tests 电工电子产品环境试验 湿热试验导则 |
China National Standards CE |
English PDF |
GB/T 20043-2005 |
Field AcCEptance Test to Determine the Hydraulic Performance of Hydraulic Turbine,storage pumps and pump-turbines 水轮机、蓄能泵和水泵水轮机水力性能现场验收试验规程 |
China National Standards CE |
English PDF |
GB/T 20042.1-2005 |
Proton Exchange Membrane Fuel CEll -- Terminology 质子交换膜燃料电池 术语 |
China National Standards CE |
English PDF |
GB/T 6404.2-2005 |
AcCEptance code for gear units-Part2:Determination of mechanical vibrations of gear units during acceptance testing 齿轮装置的验收规范 第2部分:验收试验中齿轮装置机械振动的测定 |
China National Standards CE |
English PDF |
GB/T 6404.1-2005 |
AcCEptance code for gear units-Part1:Test code for airborne sound 齿轮装置的验收规范 第1部分:空气传播噪声的试验规范 |
China National Standards CE |
English PDF |
GB/T 3871.12-2005 |
Agricultural Tractors-Test proCEdures-Part 12:Working Tests 农业拖拉机 试验规程 第12部分 使用试验 |
China National Standards CE |
English PDF |
GB/T 3871.11-2005 |
Agricultural tractors-Test proCEdures-Part 11:Suitability tests for hot atmosphere 农业拖拉机 试验规程 第11部分:高温性能试验 |
China National Standards CE |
English PDF |
GB/T 3216-2005 |
Rotodynamic pumps-Hdraulic peformanCE acceptance tests-Grades 1 and 2 回转动力泵 水力性能验收试验 1级和2级 |
China National Standards CE |
English PDF |
GB/T 6826-2005 |
Serial type of mineral proCEssing equipment 洗选设备 系列型谱 |
China National Standards CE |
English PDF |
GB/T 19956.2-2005 |
Positive-displaCEment cacuum pumps-Measurement of performance characteristics Part2:Measurement of ultimate pressure 容积真空泵性能测量方法 第2部分:极限压力的测量 |
China National Standards CE |
English PDF |
GB/T 19956.1-2005 |
Positive-displaCEment cacuum pumps-Measurement of performance characteristics Part1:Measurement of volume rate of flow(pumping speed) 容积真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
China National Standards CE |
English PDF |
GB/T 19955.2-2005 |
Vapour vacuum pumps-Measurement of performanCE characteristics Part2:Measurement of critical backing pressure 蒸汽流真空泵性能测量方法 第2部分:临界前级压力的测量 |
China National Standards CE |
English PDF |
GB/T 19955.1-2005 |
Vapour vacuum pumps-Measurement of performanCE characteristics Part1:Measurement of volume rate of flow(pumping speed) 蒸汽流真空泵性能测量方法 第1部分:体积流率(抽速)的测量 |
China National Standards CE |
English PDF |
GB/T 19936.1-2005 |
Gears-FZG test proCEdures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capacity of oils 齿轮 FZG 试验程序 第1部分:油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards CE |
English PDF |
GB/T 19935-2005 |
Worm gears-Geometry of worms-Name plates for worm gear units,CEntre distances,information to be supplied to gear manufacturer by the purchaser 蜗杆传动 蜗杆的几何参数-蜗杆装置的铭牌、中心距、用户提供给制造者的参数 |
China National Standards CE |
English PDF |
GB/T 19932-2005 |
Earth-moving machinery-Hydraulic excavators-Laboratory tests and performanCE requirements for operator protective guards 土方机械 液压挖掘机 司机防护装置的试验室试验和性能要求 |
China National Standards CE |
English PDF |
GB/T 19930-2005 |
Earth-moving machinery-Tip-Over Protection Structure(TOPS)for compact excavators-Laboratory tests and performanCE requirements 土方机械 小型挖掘机 倾翻保护结构的试验室试验和性能要求 |
China National Standards CE |
English PDF |
GB/T 19921-2005 |
Test method of particles on silicon wafer surfaCEs 硅抛光片表面颗粒测试方法 |
China National Standards CE |
English PDF |
GB/T 1883.2-2005 |
Reciprocating internal combustion engines-Vocabulary-Part 2:Terms for engine maintenanCE 往复式内燃机 词汇 第2部分:发动机维修术语 |
China National Standards CE |
English PDF |
GB/T 12965-2005 |
Monocrystalline silicon as cut sliCEs and lapped slices 硅单晶切割片和研磨片 |
China National Standards CE |
English PDF |
GB/T 7985-2005 |
Conveyor belts -- Method for the determination of the tear propagation resistanCE of textile conveyor belts 输送带 织物芯输送带抗撕裂扩大性试验方法 |
China National Standards CE |
English PDF |
GB/T 3903.11-2005 |
Footwear-Test methods for insoles,lining and insocks-perspiration resistanCE 鞋类-内底、衬里和内垫试验方法-耐汗性 |
China National Standards CE |
English PDF |
GB/Z 19027-2005 |
GuidanCE on statistical techniques for GB/T19001-2000 GB/T19001-2000的统计技术指南 |
China National Standards CE |
English PDF |
GB/T 4791-2005 |
Graphical symbols for pipline acCEssory of ships 船舶管路附件图形符号 |
China National Standards CE |
English PDF |
GB/T 19816.5-2005 |
Preparation of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of perCEntage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards CE |
English PDF |
GB/T 18570.9-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surfaCE cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法 |
China National Standards CE |
English PDF |
GB/T 18570.8-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surfaCE cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法 |
China National Standards CE |
English PDF |
GB/T 18570.5-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surfaCE cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法) |
China National Standards CE |
English PDF |
GB/T 18570.3-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surfaCE cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards CE |
English PDF |
GB/T 18570.10-2005 |
Preparation of steel substrates before application of paints and related products-Tests for the assessment of surfaCE cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法 |
China National Standards CE |
English PDF |
GB 5226.3-2005 |
Sefety of machinery-Eletrical equipment of machines-Part 11:Requirements for HV equipment for voltages above 1000Va.c.or 1500Vd.c.and not exCEeding 36kV 机械安全 机械电气设备 第11部分:电压高于1000Va.c.或1500Vd.c.但不超过36kV的高压设备的技术条件 |
China National Standards CE |
English PDF |
GB/T 6148-2005 |
Test method for temperature-resistanCE coefficient of precision resistance alloys 精密电阻合金电阻温度系数测试方法 |
China National Standards CE |
English PDF |
GB/T 6147-2005 |
Test method for thermoelectric power of precision resistanCE alloys 精密电阻合金热电动势率 测试方法 |
China National Standards CE |
English PDF |
GB/T 4591-2005 |
Test Chart for Electrostatic Copying ProCEss 静电图像测试版 |
China National Standards CE |
English PDF |
GB/T 19903.1-2005 |
Industrial automation systems and integration-Physical deviCE control-Data model for computerized numerical controllers-Part 1:Overview and fundamental principles 工业自动化系统与集成 物理设备控制 计算机数值控制器用的数据模型 第1部分:概述和基本原理 |
China National Standards CE |
English PDF |
GB/T 19899-2005 |
Binary direct voltage signals for proCEss Measurement and control systems 过程测量和控制系统用二进制 直流电压信号 |
China National Standards CE |
English PDF |
GB/T 19898-2005 |
Industrial-ProCEss measurement and control-Documentation of application software 工业过程测量和控制 应用软件文档集 |
China National Standards CE |
English PDF |
GB/T 19897.3-2005 |
Automatic Meter Reading System Lower Layer Communication Protocol Part 3:Physical layer serviCEs and procedures for connection oriented asynchronous data exchange 自动抄表系统低层通信协议 第3部分:面向连接的异步数据交换的物理层服务进程 |
China National Standards CE |
English PDF |
GB/T 19888.1-2005 |
Acoustics-Stationary audible warning deviCEs used outdoors-Part 1:Field measurements for determination of sound emission quantities 声学 户外用固定式听觉报警器 第1部分:声发射量的现场测定 |
China National Standards CE |
English PDF |
GB/T 19885-2005 |
Acoustics-Determination of sound insulation performanCE of cabins-laborartory and in situ measurements 声学 隔声间的隔声性能测定 实验室和现场测量 |
China National Standards CE |
English PDF |
GB/T 18784.2-2005 |
AssuranCE method of CAD/CAM data quality CAD/CAM 数据质量保证方法 |
China National Standards CE |
English PDF |
GB/T 17249.2-2005 |
Acoustics-Guidelines for the design of low-noise workplaCEs-Part 2:Noise control measures 声学 低噪声工作场所设计指南 第2部分:噪声控制措施 |
China National Standards CE |
English PDF |
GB/T 17214.4-2005 |
Operating conditions for industrial-proCEss measurement and control equipment Part 4:Corrosive and erosive influences 工业过程测量和控制装置的工作条件 第4部分:腐蚀和侵蚀影响 |
China National Standards CE |
English PDF |
GB/T 17214.2-2005 |
Operating conditions for industrial-proCEss measurement and control equipment Part 2:Power 工业过程测量和控制装置的工作条件 第2部分:动力 |
China National Standards CE |
English PDF |
GB/T 17213.9-2005 |
Industrial-proCEss control valves Part 2-3:Flow capacity-Test procedures 工业过程控制阀 第2-3部分:流通能力 试验程序 |
China National Standards CE |
English PDF |
GB/T 17213.6-2005 |
Industrial-proCEss control valves Part 6-1:Mounting details for attachment of Positioners to control valves-Positioner mounting on linear actuators 工业过程控制阀 第6-1部分:定位器与控制阀执行机构 连接的安装细节 定位器在直行程执行机构上的安装 |
China National Standards CE |
English PDF |
GB/T 17213.4-2005 |
Industrial-proCEss control valves Part 4:Inspection and routine testing 工业过程控制阀 第4部分:检验和例行试验 |
China National Standards CE |
English PDF |
GB/T 17213.3-2005 |
Industrial-proCEss control valves Part 3-1:Dimensions-Face-to-face dimensions for flanged,two-way,globe-type,straight pattern and center-to-face dimensions for flanged,two-way,globe-type,angle pattern control valves 工业过程控制阀 第3-1部分:尺寸 两通球形直通 控制阀法兰端面距和两通球形角形 控制阀法兰中心至法兰端面的间距 |
China National Standards CE |
English PDF |
GB/T 17213.2-2005 |
Industrial-proCEss control valves Part 2-1:Flow capacity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分:流通能力 安装条件下流体流量的计算公式 |
China National Standards CE |
English PDF |
GB/T 17213.16-2005 |
Industrial-proCEss control valves Part 8-4:Noise considerations-Prediction of noise generated by hydrodynamic flow 工业过程控制阀 第8-4部分:噪声的考虑 液动流流经控制阀产生的噪声预测方法 |
China National Standards CE |
English PDF |
GB/T 17213.15-2005 |
Industrial-proCEss control valves Part 8-3:Noise considerations-Control valve aerodynamic noise prediction method 工业过程控制阀 第8-3部分:噪声的考虑 空气动力流流经控制阀产生的噪声预测方法 |
China National Standards CE |
English PDF |
GB/T 17213.14-2005 |
Industrial-proCEss control valves Part 8-2:Noise considerations-Laboratory of noise generated by hydrodynamic flow through control valves 工业过程控制阀 第8-2部分:噪声的考虑 实验室 内测量液动流流经控制阀产生的噪声 |
China National Standards CE |
English PDF |
GB/T 17213.13-2005 |
Industrial-proCEss control valves Part 6-2:Mounting details for attachment of Positioners to control valves-Positioner mounting on rotary actuators 工业过程控制阀 第6-2部分:定位器与控制阀执行机构连接的安装细节定位器在角行程执行机构上的安装 |
China National Standards CE |
English PDF |
GB/T 17213.12-2005 |
Industrial-proCEss control valves Part 3-3:Dimensions-End-to-end dimensions for buttweld,two-way,globe-type,straight pattern control valves 工业过程控制阀 第3-3部分:尺寸 对焊式两通球形直通控制阀的端距 |
China National Standards CE |
English PDF |
GB/T 17213.11-2005 |
Industrial-proCEss control valves Part 3-2:Dimensions-Face-to-face dimensions for rotary control valves except butterfly valves 工业过程控制阀 第3-2部分:尺寸 角行程控制阀(蝶阀除外)的端面距 |
China National Standards CE |
English PDF |
GB/T 17213.10-2005 |
Industrial-proCEss control valves Part 2:Flow capacity Section Four:Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分:流通能力 固有流量特性和可调比 |
China National Standards CE |
English PDF |
GB/T 10973-2005 |
Color paper proCEssor 彩色相纸冲洗机 |
China National Standards CE |
English PDF |
GB/T 10970-2005 |
Color printer and proCEsser 彩色扩印冲洗机 |
China National Standards CE |
English PDF |
GB 19881-2005 |
Safety regulation for dust explosion prevention in flax fiber proCEssing system 亚麻纤维加工系统粉尘防爆安全规程 |
China National Standards CE |
English PDF |
GB 14192-2005 |
Safety code of practiCE for logging operations 木材采伐运输安全通则 |
China National Standards CE |
English PDF |
GB/T 19878-2005 |
General specifications for capacitanCE type & resistance type grain moisture tester 电容法和电阻法粮食水分测定仪 通用技术条件 |
China National Standards CE |
English PDF |
GB/T 8381.11-2005 |
Determination of Amprolium in Feeds-High PerformanCE Liquid Chromatography 饲料中盐酸氨丙啉的测定-高效液相色谱法 |
China National Standards CE |
English PDF |
GB/T 8381.10-2005 |
Determination of Sulfaquinoxaline in feeds High-performanCE Liquid chromatography 饲料中磺胺喹恶啉的测定-高效液相色谱法 |
China National Standards CE |
English PDF |
GB/T 13080.2-2005 |
Determination of chelation perCEntage of iron、copper、manganese and zinc methionine of gel filtration chromatography 饲料添加剂 蛋氨酸铁(铜、锰、锌)螯合率的测定 凝胶过滤色谱法 |
China National Standards CE |
English PDF |
GB 10892-2005 |
Stationary air compressors-Safety rules and code of practiCE 固定的空气压缩机 安全规则和操作规程 |
China National Standards CE |
English PDF |
GB/T 19874-2005 |
Mechanical vibration-SusCEptibility and sensitivity of machines to unbalance 机械振动 机器不平衡敏感度和不平衡灵敏度 |
China National Standards CE |
English PDF |
GB/T 19873.1-2005 |
Condition monitoring and diagnostics of machines-Vibration condition monitoring-Part 1:General proCEdures 机器状态监测与诊断 振动状态监测 第1部分:总则 |
China National Standards CE |
English PDF |
GB 10238-2005 |
Oil well CEment 油井水泥 |
China National Standards CE |
English PDF |
GB/T 16825.2-2005 |
Verification of static uniaxial testing machines-Part 2:Tension creep testing machines-Verification of the applied forCE 静力单轴试验机的检验 第2部分:拉力蠕变试验机施加力的检验 |
China National Standards CE |
English PDF |
GB 4706.1-2005 |
Household and similar electrical applianCEs-Safety Part 1:General requirements 家用和类似用途电器的安全 第1部分:通用要求 |
China National Standards CE |
English PDF |
GB/T 772-2005 |
Technical specifications of porCElain element for high voltage insulators 高压绝缘子瓷件 技术条件 |
China National Standards CE |
English PDF |
GB/T 2423.28-2005 |
Basic environmental testing proCEdures for electric and electronic products-Part2:Test methods-Test T:Soldering 电工电子产品环境试验 第2部分:试验方法 试验T:锡焊 |
China National Standards CE |
English PDF |
GB/T 14598.17-2005 |
Electrical relay-Part 22-6:Electrical disturbanCE tests for measuring relays and protection equipment-Immunity to conducted disturbances induced by radio frequency fields 电气继电器 第22-6部分:量度继电器和保护装置的电气骚扰试验-射频场感应的传导骚扰的抗扰度 |
China National Standards CE |
English PDF |
GB/T 11020-2005 |
Flammability of solid non-metallic meterials when exposed to flame sourCEs-List of test methods 固体非金属材料暴露在火焰源时的燃烧性试验方法清单 |
China National Standards CE |
English PDF |
GB/T 1029-2005 |
Test proCEdures for three-phase synchronous machines 三相同步电机试验方法 |
China National Standards CE |
English PDF |
GB/T 10067.4-2005 |
Basic specifications for electroheat installations Part 4:Indirect resistanCE furnaces 电热装置基本技术条件 第4部分:间接电阻炉 |
China National Standards CE |
English PDF |
GB/T 10066.11-2005 |
Test methods for electroheat installations Part 11:Submerged-arc furnaCEs 电热装置的试验方法 第11部分:埋弧炉 |
China National Standards CE |
English PDF |
GB/T 10066.10-2005 |
Test methods for electroheat installtions Part 10:Direct arc furnaCEs 电热装置的试验方法 第10部分:直接电弧炉 |
China National Standards CE |
English PDF |
GB/T 19851.11-2005 |
Sports equipment and playground for middle school primary school Part 11:Synthetic surfaCEd athletic aracks 中小学体育器材和场地 第11部分:合成材料面层运动场地 |
China National Standards CE |
English PDF |
GB/T 5185-2005 |
Welding and allied proCEsses-Nomenclature of processes and reference numbers 焊接及相关工艺方法代号 |
China National Standards CE |
English PDF |
GB/T 19869.1-2005 |
Welding proCEdure qualification test for steels,nickel and nickel alloys 钢、镍及镍合金的焊接工艺评定试验 |
China National Standards CE |
English PDF |
GB/T 19868.4-2005 |
Welding proCEdure qualification based on pre-production welding test 基于预生产焊接试验的工艺评定 |
China National Standards CE |
English PDF |
GB/T 19868.3-2005 |
Welding proCEdure qualification by adoption of a standard welding procedure 基于标准焊接规程的工艺评定 |
China National Standards CE |
English PDF |
GB/T 19868.2-2005 |
Welding proCEdure qualification based on previous welding experience 基于焊接经验的工艺评定 |
China National Standards CE |
English PDF |
GB/T 19868.1-2005 |
Welding proCEdure qualification based on tested welding consumables 基于试验焊接材料的工艺评定 |
China National Standards CE |
English PDF |
GB/T 19867.1-2005 |
Welding proCEdure specification for arc welding 电弧焊焊接工艺规程 |
China National Standards CE |
English PDF |
GB/T 19866-2005 |
Specification and qualification of welding proCEdures for metallic materials-General rules 焊接工艺规程及评定的一般原则 |
China National Standards CE |
English PDF |
GB/T 5796.4-2005 |
Trapezoidal screw threads-Part 4:ToleranCEs 梯形螺纹 第4部分:公差 |
China National Standards CE |
English PDF |
GB/T 2847-2005 |
Pozzolanic materials used for CEment production 用于水泥中的火山灰质混合材料 |
China National Standards CE |
English PDF |
GB 10963.1-2005 |
Electrical acCEssories-Circuit-breakers for overcurrent protection for household and similar installation Part 1:Circuit-breakers for a.c.operation 电气附件-家用及类似场所用过电流保护断路器 第1部分:用于交流的断路器 |
China National Standards CE |
English PDF |
GB 16895.26-2005 |
Electrical installations of buildings-Part 7-740:Requirements for special installations or locations-structures,amusement deviCEs and booths at fairgrounds,amusement parks and circuses 建筑物电气装置 第7-740部分:特殊装置或场所的要求-游乐场和马戏场中的构筑物、娱乐设施和棚屋 |
China National Standards CE |
English PDF |
GB/Z 19871-2005 |
Digital television broadcast reCEivers-Electromagnetic compatibility-Request and methods of measurement 数字电视广播接收机电磁兼容 性能要求和测量方法 |
China National Standards CE |
English PDF |
GB/T 19271.3-2005 |
Protection against lightning electromagnetic impulse(LEMP)-Part 3:Requirements of surge protective deviCEs(SPDs) 雷电电磁脉冲的防护 第3部分:对浪涌保护器的要求 |
China National Standards CE |
English PDF |
GB/T 7666-2005 |
Nomenclature and code for transduCErs 传感器命名法及代号 |
China National Standards CE |
English PDF |
GB/T 7665-2005 |
General terminology for transduCErs 传感器通用术语 |
China National Standards CE |
English PDF |
GB/T 8151.16-2005 |
Methods for chemical analysis of zinc conCEntrates-Determination of cobalt content-Flame atomic absorption spectrometer method 锌精矿化学分析方法 钴量的测定 火焰原子吸收光谱法 |
China National Standards CE |
English PDF |
GB/T 8151.15-2005 |
Methods for chemical analysis of zinc conCEntrates-Determination of mercury content-Atomic fluorescence spectrometry method 锌精矿化学分析方法 汞量的测定 原子荧光光谱法 |
China National Standards CE |
English PDF |
GB/T 3884.11-2005 |
Methods for chemical analysis of copper conCEntrates-Determination of mercury content-Cold atomic absorption spectrometric method 铜精矿化学分析方法 汞量的测定 冷原子吸收光谱法 |
China National Standards CE |
English PDF |
GB/T 9451-2005 |
Determination of total or effective thickness of thin surfaCE hardened layers of steel parts 钢件薄表面总硬化层深度或有效硬化层深度的测定 |
China National Standards CE |
English PDF |
GB/T 6730.62-2005 |
Iron ores-Determination of calcium,silicon,manganese,titanium,phosphorus magnesium,aluminium and barium content Wavelength dispersive X-ray fluoresCEnce spectrometric method 铁矿石 钙、硅、镁、钛、磷、锰、铝和钡含量的测定 波长色散X射线荧光光谱法 |
China National Standards CE |
English PDF |
Find out:15786Items | To Page of: First -Previous-Next -Last | [128] [129] [130] [131] [132] [133] [134] |