Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 8243.12-2007 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant retention capaCity 内燃机全流式机油滤清器试验方法 第12部分：采用颗粒计数法测定滤清效率和容灰量 |
China National Standards City |
 English PDF |
| GB/T 21035-2007 |
Feed safety evaluation - Feeding teratogeniCity test 饲料安全性评价 喂养致畸试验 |
China National Standards City |
English PDF |
| GB 5085.3-2007 |
Identification standards for hazardous wastes - Identification for extraction toxiCity 危险废物鉴别标准 浸出毒性鉴别 |
China National Standards City |
English PDF |
| GB 5085.2-2007 |
Identification standards for hazardous wastes - Screening test for acute toxiCity 危险废物鉴别标准 急性毒性初筛 |
China National Standards City |
English PDF |
| GB/T 20858-2007 |
Glass containers - Determination of capaCity by gravimetric method - Test method 玻璃容器 用重量法测定容量的试验方法 |
China National Standards City |
English PDF |
| GB/T 20855-2007 |
City codes for air transportation 航空运输城市地名代码 |
China National Standards City |
English PDF |
| GB/T 13665-2007 |
Test method for damping capaCity of metallic damping materials - Torsion pendulum method and Bending vibration 金属阻尼材料阻尼本领试验方法 扭摆法和弯曲振动法 |
China National Standards City |
English PDF |
| GB/T 3510-2006 |
Rubber，unvulcanized - Determination of plastiCity - Rapid plastimeter method 未硫化胶 塑性的测定 快速塑性计法 |
China National Standards City |
English PDF |
| GB/T 12828-2006 |
Rubber，raw and unvalcanized compounded - Determination of plastiCity number and recovery number - Parallel plate method 生胶和未硫化混炼胶 塑性值及复原值的测定 平行板法 |
China National Standards City |
English PDF |
| GB/T 13611-2006 |
Classification and essential property of City gas 城镇燃气分类和基本特性 |
China National Standards City |
English PDF |
| GB/T 20449-2006 |
Test method for butane work capaCity of activated carbon 活性炭丁烷工作容量测试方法 |
China National Standards City |
English PDF |
| GB/T 5266-2006 |
Acoustics - Measurements of the longitudinal wave veloCity and attenuation coefficient for underwater acoustical materials - Pulse tube method 声学 水声材料纵波声速和衰减系数的测量 脉冲管法 |
China National Standards City |
English PDF |
| GB/T 17215.211-2006 |
ElectriCity metering equipment (a.c.) -- General requirements, tests and test conditions -- Part 11: Metering equipment 交流电测量设备-通用要求、试验和试验条件 第11部分：测量设备 |
China National Standards City |
English PDF |
| GB/T 20405.5-2006 |
Urine-absorbing aids for incontinence―Test methods for characterizing Polymer-based absorbent materials―Part 5: Gravimetric determination of free swell capaCity in saline solution 失禁者用尿液吸收剂 聚合物基质吸液材料特性的测试方法 第5部分：在生理盐水中用称重法测定吸水率 |
China National Standards City |
English PDF |
| GB/T 3871.4-2006 |
Agricultural tractors - Test procedures - Part 4: Rear three-point linkage lifting capaCity 农业拖拉机 试验规程 第4部分：后置三点悬挂装置提升能力 |
China National Standards City |
English PDF |
| GB/T 19969-2005 |
Information technology -- 130 mm optical disk cartridges for information interchange -- CapaCity : 2.6 Gbytes per cartridge 信息技术 信息交换用130mm盒式光盘 容量：每盒2.6G字节 |
China National Standards City |
English PDF |
| GB/T 19975-2005 |
Test method of tensile properties for high tenaCity filament yarn 高强化纤长丝拉伸性能试验方法 |
China National Standards City |
English PDF |
| GB/T 1543-2005 |
Paper and board-Determination of OpaCity(paper backing)-Diffuse reflectance method 纸和纸板 不透明度(纸背衬)的测定(漫反射法) |
China National Standards City |
English PDF |
| GB/T 19936.1-2005 |
Gears-FZG test procedures-Part1:FZG test method A/8.3/90 for relative scuffing load-carrying capaCity of oils 齿轮 FZG 试验程序 第1部分：油品的相对胶合承载能力 FZG 试验方法 A/8.3/90 |
China National Standards City |
English PDF |
| GB/T 19928-2005 |
Earth-moving machinery-Lift capaCity of pipelayers and wheeled tractors or loaders equipped with side boom 土方机械 吊管机和安装侧臂的轮胎式推土机或装载机的起重量 |
China National Standards City |
English PDF |
| GB/T 17213.9-2005 |
Industrial-process control valves Part 2-3:Flow capaCity-Test procedures 工业过程控制阀 第2-3部分：流通能力 试验程序 |
China National Standards City |
English PDF |
| GB/T 17213.2-2005 |
Industrial-process control valves Part 2-1:Flow capaCity Sizing equations for fluid flow under Installed conditions 工业过程控制阀 第2-1部分：流通能力 安装条件下流体流量的计算公式 |
China National Standards City |
English PDF |
| GB/T 17213.10-2005 |
Industrial-process control valves Part 2:Flow capaCity Section Four:Inherent flow characteristics and rangeability 工业过程控制阀 第2-4部分：流通能力 固有流量特性和可调比 |
China National Standards City |
English PDF |
| GB/T 19861-2005 |
Determination for strong-base group,weak-base group and weak-acid group exchange capaCity of acrylic type anion exchange resins 丙烯酸系阴离子交换树脂强碱基团、弱碱基团和弱酸基团交换容量测定方法 |
China National Standards City |
English PDF |
| GB/T 8094-2005 |
Equipment for harvesting-Combine harvesters-Determination and designation of grain tank capaCity and unloading device performance 收获机械 联合收割机 粮箱容量及卸粮机构性能的测定 |
China National Standards City |
English PDF |
| GB/T 19780-2005 |
CapaCity calibration of spherical metal tank-Total station external measuring method 球形金属罐的容积标定 全站仪外测法 |
China National Standards City |
English PDF |
| GB/T 3140-2005 |
Fiber-reinforced plastics composites-Determination of mean specific heat capaCity 纤维增强塑料平均比热容试验方法 |
China National Standards City |
English PDF |
| GB/T 19623-2004 |
Labor force quota for signaling engineering in City transit system 城市轨道交通通信信号工程劳动定员定额 |
China National Standards City |
English PDF |
| GB/T 19622-2004 |
Labor force quota for subway engineering in City transit system 城市轨道交通地下铁道工程劳动定员定额 |
China National Standards City |
English PDF |
| GB/T 19621-2004 |
Labor force quota for lightrail engineering in City transit system 城市轨道交通轻轨工程劳动定员定额 |
China National Standards City |
English PDF |
| GB/T 19620-2004 |
Labor force quota for locomotive power supply engineering in City transit system 城市轨道交通电力牵引供电工程 劳动定员定额 |
China National Standards City |
English PDF |
| GB/Z 6413.2-2003 |
Calculation of scuffing load capaCity of cylindrical，bevel and hypoid gears--Part 2:Integral temperature method 圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第2部分:积分温度法 |
China National Standards City |
English PDF |
| GB/Z 6413.1-2003 |
Calculation of scuffing load capaCity of cylindrical，bevel and hypoid gears--Part 1:Flash temperature method 圆柱齿轮、锥齿轮和准双曲面齿轮 胶合承载能力计算方法 第1部分:闪温法 |
China National Standards City |
English PDF |
| GB/T 19406-2003 |
Calculation methods of load capaCity for involute cylindrical spur and helical gears--Application for industrical gears 渐开线直齿和斜齿圆柱齿轮承载能力计算方法 工业齿轮应用 |
China National Standards City |
English PDF |
| GB/T 10062.3-2003 |
Calculation of load capaCity of bevel gear--Part 3:Calculation of tooth root strength 锥齿轮承载能力计算方法 第3部分:齿根弯曲强度计算 |
China National Standards City |
English PDF |
| GB/T 10062.2-2003 |
Calculation of load capaCity of bevel gear--Part 2:Calculation of surface durability(pitting) 锥齿轮承载能力计算方法 第2部分:齿面接触疲劳(点蚀)强度计算 |
China National Standards City |
English PDF |
| GB/T 10062.1-2003 |
Calculation of load capaCity of bevel gear--Part 1:Introduction and general influence factors 锥齿轮承载能力计算方法 第1部分:概述和通用影响系数 |
China National Standards City |
English PDF |
| GB/T 19315-2003 |
Small craft--Maximum load capaCity 小艇 最大装载量 |
China National Standards City |
English PDF |
| GB 4655-2003 |
Safety rules of static electriCity in the rubber industry 橡胶工业静电安全规程 |
China National Standards City |
English PDF |
| GB/T 19260-2003 |
Structure requirements of low floor City-bus and low entry city-bus 低地板及低入口城市客车结构要求 |
China National Standards City |
English PDF |
| GB/T 19115.2-2003 |
Off-grid type wind-solar photovoltaic hybrid generate electriCity system of household-use--Part 2: Test methods 离网型户用风光互补发电系统 第2部分: 试验方法 |
China National Standards City |
English PDF |
| GB/T 19115.1-2003 |
Off-grid type wind-solar photovoltaic hybrid generate electriCity system of household-use--Part 1: Technology condition 离网型户用风光互补发电系统 第1部分:技术条件 |
China National Standards City |
English PDF |
| GB/T 17680.9-2003 |
Criteria for emergency planning and preparedness for nuclear power plants--Maintenance of on-site emergency response capaCity 核电厂应急计划与准备准则 场内应急响应能力的保持 |
China National Standards City |
English PDF |
| GB/T 16886.5-2003 |
Biological evaluation ofmedical devices--Part 5: Test for in vitro cytotoxiCity 医疗器械生物学评价 第5部分: 体外细胞毒性试验 |
China National Standards City |
English PDF |
| GB/T 50331-2002 |
The standard of water quantity for City’s residential use 城市居民生活用水量标准 |
China National Standards City |
English PDF |
| GB/T 18807-2002 |
Information technology--Data interchange on 130 mm optical disk cartridges--CapaCity:1.3 gigabytes per cartridge 信息技术 130 mm盒式光盘上的数据交换容量:每盒1.3 G字节 |
China National Standards City |
English PDF |
| GB/T 15284-2002 |
Particular requirements for multi-rate electriCity meters 多费率电能表 特殊要求 |
China National Standards City |
English PDF |
| GB/T 18678-2002 |
Equipment for crop protection--Agriculture spray--Nominal capaCity of spray tank and diameter of filling 植物保护机械 农业喷雾机(器)药液箱额定容量和加液孔直径 |
China National Standards City |
English PDF |
| GB/T 18460.3-2001 |
Pre-payment vending system using integrated circuit(s)cards with contacts--Part 3:Pre-payment elect-riCity meters IC卡预付费售电系统 第3部分:预付费电度表 |
China National Standards City |
English PDF |
| GB/T 12598-2001 |
Determination for spheriCity of ion exchange resins after attrition or osmotic-attrition 离子交换树脂渗磨圆球率、磨后圆球率的测定 |
China National Standards City |
English PDF |
| GB/T 18140-2000 |
Information technology--Data interchange on 130 mm optical disk cartridges--CapaCity:1 gigabyte per cartridge 信息技术 130 mm盒式光盘上的数据交换 容量:每盒1 G字节 |
China National Standards City |
English PDF |
| GB/T 18122-2000 |
Audio visual equipment and systems--Rating plates--Marking of electriCity supply 视听设备和系统 标牌 电源标志 |
China National Standards City |
English PDF |
| GB/T 5760-2000 |
Determination for exchange capaCity of anion exchange resins in hydroxylic form 氢氧型阴离子交换树脂交换容量测定方法 |
China National Standards City |
English PDF |
| GB/T 5759-2000 |
Determination for water retention capaCity of anion exchange resins in hydroxylic form 氢氧型阴离子交换树脂含水量测定方法 |
China National Standards City |
English PDF |
| GB/T 5986-2000 |
Test method for modulus of elastiCity of thermostat metals 热双金属弹性模量试验方法 |
China National Standards City |
English PDF |
| GB/T 13621-1999 |
CapaCity series and radio-frequency channel arrangement and equipment main technical specifications for 100～1000 MHz radio relay communication systems 100～1000 MHz接力通信系统的容量系列波道配置及设备的主要技术要求 |
China National Standards City |
English PDF |
| GB/T 17855-1999 |
Calculation of load capaCity of spline 花键承载能力计算方法 |
China National Standards City |
English PDF |
| GB/T 17660-1999 |
Method for determination of the buffering capaCity of wood 木材缓冲容量测定方法 |
China National Standards City |
English PDF |
| GB/T 17633-1998 |
Geotextiles and geotextile-related products--Determination of water flow capaCity in their plane 土工布及其有关产品 平面内水流量的测定 |
China National Standards City |
English PDF |
| GB/T 3485-1998 |
Technical guides for evaluating the rationality of electriCity usage in industrial enterprise 评价企业合理用电技术导则 |
China National Standards City |
English PDF |
| GB/T 17217-1998 |
Hygienic standard for communal toilet in City municipality 城市公共厕所卫生标准 |
China National Standards City |
English PDF |
| GB/T 3480-1997 |
Calculation methods of load capaCity for involute cylindrical gears 渐开线圆柱齿轮承载能力计算方法 |
China National Standards City |
English PDF |
| GB/T 5095.3-1997 |
Electromechanical components for electronic equipment--Basic testing procedures and measuring methods--Part 3:Current-carrying capaCity tests 电子设备用机电元件 基本试验规程及测量方法 第3部分:载流容量试验 |
China National Standards City |
English PDF |
| GB 5086.2-1997 |
Test method standard for leachingtoxiCity of solid wastes--Horizontal vibration extraction procedure 固体废物浸出毒性浸出方法 水平振荡法 |
China National Standards City |
English PDF |
| GB 5086.1-1997 |
Test method standard for leaching toxiCity of solid wastes--Roll over leaching procedure 固体废物浸出毒性浸出方法 翻转法 |
China National Standards City |
English PDF |
| GB/T 16539-1996 |
Acoustics--Determination of sound power levels of noise sources using vibration veloCity--Measurement for seal machinery 声学 振速法测定噪声源声功率级 用于封闭机器的测量 |
China National Standards City |
English PDF |
| GB/T 16310.4-1996 |
Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--ToxiCity test method for mammal 船舶散装运输液体化学品危害性评价规范 哺乳动物毒性试验方法 |
China National Standards City |
English PDF |
| GB/T 16310.1-1996 |
Specification on evaluation methods of hazards of liquid chemicals transported in bulk by shipping--Acute toxiCity testing methods for aquatic organism 船舶散装运输液体化学品危害性评价规范 水生生物急性毒性试验方法 |
China National Standards City |
English PDF |
| GB/T 15777-1995 |
Method for determination of the modulus of elastiCity in compressive parallel to grain of wood 木材顺纹抗压弹性模量测定方法 |
China National Standards City |
English PDF |
| GB/T 15489.5-1995 |
Colour filter glass test methods--ChromatiCity 滤光玻璃测试方法 色品 |
China National Standards City |
English PDF |
| GB/T 15441-1995 |
Method by use of photobalteria for detecting the acute toxiCity of water quality 水质 急性毒性的测定 发光细菌法 |
China National Standards City |
English PDF |
| GB/T 15440-1995 |
Guidelines for preparing samples for genetoxiCity testing of organic pollutants in environment 环境中有机污染物遗传毒性检测的样品前处理规范 |
China National Standards City |
English PDF |
| GB/T 15181-1994 |
CapaCity calibration of spherical metal tanks--Strapping method 球形金属罐容积标定法(围尺法) |
China National Standards City |
English PDF |
| GB 3102.5-1993 |
Quantities and units of electriCity and magnetism 电学和磁学的量和单位 |
China National Standards City |
English PDF |
| GB/T 14230-1993 |
Standard of test method for bending load capaCity of gears 齿轮弯曲疲劳强度试验方法 |
China National Standards City |
English PDF |
| GB/T 14229-1993 |
Standard of test method for surface load capaCity of gears 齿轮接触疲劳强度试验方法 |
China National Standards City |
English PDF |
| GB/T 13799-1992 |
Methods of the calculation for load capaCity of cylindrical gear with double-circular-arc tooth profile 双圆弧圆柱齿轮承载能力计算方法 |
China National Standards City |
English PDF |
| GB/T 13783-1992 |
Cotton fibres--Determination of breaking tenaCity of flat bundles 棉纤维断裂比强度的测定 平束法 |
China National Standards City |
English PDF |
| GB/T 13672-1992 |
Standard test method for scuffing load capaCity of gears 齿轮胶合承载能力试验方法 |
China National Standards City |
English PDF |
| GB/T 13267-1991 |
Water quality--Determination of the acute toxiCity of substance to a freshwater fish (Brachydanio rerio Hamilton-Buchanan) 水质 物质对淡水鱼(斑马鱼)急性毒性测定方法 |
China National Standards City |
English PDF |
| GB/T 13266-1991 |
Water quality--Determination of the acute toxiCity of substance to Daphnia (Daphnia magna straus) 水质 物质对蚤类(大型蚤)急性毒性测定方法 |
China National Standards City |
English PDF |
| GB/T 13231-1991 |
Calculated methods of carrying capaCity for receiving and dispatching tracks at railway marshalling station(3-stage/3-yard) 铁路编组站到发线通过能力计算方法 (三级三场) |
China National Standards City |
English PDF |
| GB/T 12810-1991 |
Laboratory glassware--Volumetric glassware--Methods for use and testing of capaCity 实验室玻璃仪器 玻璃量器的容量校准和使用方法 |
China National Standards City |
English PDF |
| GB/T 12541-1990 |
Motor vehicles--Passing topography capaCity--Test method 汽车地形通过性试验方法 |
China National Standards City |
English PDF |
| GB/T 12005.8-1989 |
Determination of dissolving veloCity ofpowder polyacrylamide 粉状聚丙烯酰胺溶解速度测定方法 |
China National Standards City |
English PDF |
| GB/T 10063-1988 |
Simplified methods for the calculation of load capaCity of involute cylindrical gears for general machines 通用机械渐开线圆柱齿轮 承载能力简化计算方法 |
China National Standards City |
English PDF |
| GB/T 9654-1988 |
Calculated methods of sorting capaCity for railway marshalling station (3-stage/3-yard) 铁路编组站改编能力计算方法 (三级三场) |
China National Standards City |
English PDF |
| GB/T 7585-1987 |
CapaCity series and radio-frequency channel arrangement for analog microwave relay systems 模拟微波接力通信系统容量系列及波道配置 |
China National Standards City |
English PDF |
| GB 6280-1986 |
CapaCity series and frequency channels arrangement in 25 to 1000 MHz land mobile telecommunication network 25～1000 MHz陆地移动通信网的容量系列及频道配置 |
China National Standards City |
English PDF |
| GB/T 5886-1986 |
Testing method of single fiber breaking tenaCity of ramie 苎麻单纤维断裂强度试验方法 |
China National Standards City |
English PDF |
| GB/T 5882-1986 |
Testing method of bundle breaking tenaCity of ramie fiber 苎麻束纤维断裂强度试验方法 |
China National Standards City |
English PDF |
| GB/T 3974-1983 |
Telephone transmission interference allowances for long-distance high-capaCity analogue microwave communication systems 大容量长距离模拟微波通信干线电话传输干扰容限 |
China National Standards City |
English PDF |
| GB/T 3948-1983 |
Test method of three primary colors chromatiCity coordinates for TV 电视三基色色度坐标测试方法 |
China National Standards City |
English PDF |
| GB/T 3142-1982 |
Lubricants--Determination of load-carrying capaCity (four balls method) 润滑剂承载能力测定法 (四球法) |
China National Standards City |
English PDF |
| Find out:594Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 |
+86-755-25831330
