GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 10855-2003 |
Inverted tooth(silENT)chains and sprockets 齿形链和链轮 |
China National Standards ENT |
English PDF |
GB 19344-2003 |
Technique requiremENT and test method of leaking-safety of gas supply system on using gas vehicle 在用燃气汽车燃气供给系统泄漏安全技术要求及检验方法 |
China National Standards ENT |
English PDF |
GB/T 7973-2003 |
Paper,board and pulps--MeasuremENT of diffuse reflectance factor(Diff/Geometry) 纸、纸板和纸浆 漫反射因数的测定(漫射/垂直法) |
China National Standards ENT |
English PDF |
GB/T 10664-2003 |
PigmENT printing ink--Determination of printing shade,relative strength and granule fineness 涂料印花色浆 色光、着色力及颗粒细度的测定 |
China National Standards ENT |
English PDF |
GB 9706.2-2003 |
Medical electrical equipmENT--Part 2-16: Particular requirements for the safety of haemodialysis,haemodiafiltration and haemofiltration equipment 医用电气设备 第2-16部分:血液透析、血液透析滤过和血液滤过设备的安全专用要求 |
China National Standards ENT |
English PDF |
GB 8319-2003 |
Food additive--Oil of mENTha arvensis,partially dementholized 食品添加剂 亚洲薄荷素油 |
China National Standards ENT |
English PDF |
GB 19337-2003 |
Abamectin emulsifiable concENTrates 阿维菌素乳油 |
China National Standards ENT |
English PDF |
GB 19307-2003 |
Paraquat technical concENTrates 百草枯母药 |
China National Standards ENT |
English PDF |
GB/T 7354-2003 |
Partial discharge measuremENTs 局部放电测量 |
China National Standards ENT |
English PDF |
GB 5135.6-2003 |
Automatic sprinkler system--Part 6: ConvENTion valve 自动喷水灭火系统 第6部分: 通用阀门 |
China National Standards ENT |
English PDF |
GB/T 19314.1-2003 |
Small craft--Hull construction and scantlings--Part 1: Materials: Thermosetting resins,glass-fibre reinforcemENT,reference laminate 小艇 艇体结构和构件尺寸 第1部分:材料:热固性树脂、玻璃纤维增强塑料、基准层合板 |
China National Standards ENT |
English PDF |
GB/T 19312-2003 |
Small craft--VENTilation of petrol engine and/or petrol tank compartments 小艇 汽油机和/或汽油柜舱室的通风 |
China National Standards ENT |
English PDF |
GB/T 19310-2003 |
Small craft--PermanENTly installed fuel systems and fixed fuel tanks 小艇 永久性安装的燃油系统和固定式燃油柜 |
China National Standards ENT |
English PDF |
GB 2711-2003 |
Hygienic standard for non-fermENTed beanproducts and gluten 非发酵性豆制品及面筋卫生标准 |
China National Standards ENT |
English PDF |
GB 50337-2003 |
Code for planning of urban environmENTal sanitation facilities 城市环境卫生设施规划规范 |
China National Standards ENT |
English PDF |
GB/T 3047.5-2003 |
Series of basic dimensions of cabiners for vertical incremENT of 20mm 高度进制为20mm的台式机箱基本尺寸系列 |
China National Standards ENT |
English PDF |
GB/T 3047.3-2003 |
Series of basic dimensions of subracks and plug-in units for vertical incremENT of 20mm 高度进制为20mm的插箱、插件基本尺寸系列 |
China National Standards ENT |
English PDF |
GB/T 19290.2-2003 |
Modular order for the developmENT of mechanical structures for electronic equipment practices--Part 2: Sectional specification--Interface co-ordination dimensions for the 25mm equipment practice 发展中的电子设备构体机械结构模数序列 第2部分: 分规范 25 mm设备构体的接口协调尺寸 |
China National Standards ENT |
English PDF |
GB/T 19290.1-2003 |
Modular order for the developmENT of mechanical structures for electronic equipment practices--Part 1: Generic standard 发展中的电子设备构体机械结构模数序列 第1部分:总规范 |
China National Standards ENT |
English PDF |
GB/T 19287-2003 |
The general immunity requiremENTs for telecommunication equipment 电信设备的抗扰度通用要求 |
China National Standards ENT |
English PDF |
GB/Z 18700.5-2003 |
Telecontrol equipmENT and systems--Part 6-1: Telecontrol protocols compatible with ISO standards and ITU-T recommendations--Application contextand organization of standards 远动设备及系统 第6-1部分:与ISO标准和ITU-T建议兼容的远动协议标准的应用环境和结构 |
China National Standards ENT |
English PDF |
GB/T 19273-2003 |
ENTerprise standard system--Evaluation and improvement 企业标准体系 评价与改进 |
China National Standards ENT |
English PDF |
GB/T 15498-2003 |
ENTerprise standard system--Administrative standard system and duty standard system 企业标准体系 管理标准和工作标准体系 |
China National Standards ENT |
English PDF |
GB/T 15497-2003 |
ENTerprise standard system--Technical standard system 企业标准体系 技术标准体系 |
China National Standards ENT |
English PDF |
GB/T 15496-2003 |
ENTerprise standard system--Requirement 企业标准体系 要求 |
China National Standards ENT |
English PDF |
GB 13318-2003 |
General rules for safety and environmENTal conservation of forging production 锻造生产安全与环保通则 |
China National Standards ENT |
English PDF |
GB/T 3074.4-2003 |
Method for the determination of the coefficiENT of thermal expansion of graphite electrodes 石墨电极热膨胀系数(CTE)测定方法 |
China National Standards ENT |
English PDF |
GB/T 19292.3-2003 |
Corrosion of metals and alloys--Corrosivity of atmospheres--MeasuremENT of pollution 金属和合金的腐蚀 大气腐蚀性 污染物的测量 |
China National Standards ENT |
English PDF |
GB/T 19289-2003 |
Methods of measuremENT of density,resistivity and stacking factor of electrical steel sheet and strip 电工钢片(带)的密度、电阻率和叠装系数的测量方法 |
China National Standards ENT |
English PDF |
GB 7000.18-2003 |
Safety requiremENTs for extra low voltage lighting systems for filament lamps 钨丝灯用特低电压照明系统安全要求 |
China National Standards ENT |
English PDF |
GB 7000.17-2003 |
Safety requiremENTs for luminaries with limited surface temperatures 限制表面温度灯具安全要求 |
China National Standards ENT |
English PDF |
GB/T 19275-2003 |
Evaluation of the potENTial biodegradability and disintegration of plastic materials by the action of the specific microorganisms 材料在特定微生物作用下潜在生物分解和崩解能力的评价 |
China National Standards ENT |
English PDF |
GB/T 12004.4-2003 |
Polyvinyl chloride paste--Determination of apparENT viscosity by the Brookfield test method 聚氯乙烯增塑糊表观粘度的测定 Brookfield试验法 |
China National Standards ENT |
English PDF |
GB/T 11213.3-2003 |
Sodium hydroxide for chemical fiber use--Determination of the calcium contENT--EDTA complexometric method 化纤用氢氧化钠 钙含量的测定 EDTA络合滴定法 |
China National Standards ENT |
English PDF |
GB/T 745-2003 |
Pulps--Determination of pENTosan content 纸浆 多戊糖的测定 |
China National Standards ENT |
English PDF |
GB/T 5009.52-2003 |
Method for analysis of hygienic standard of fermENTed bean products 发酵性豆制品卫生标准的分析方法 |
China National Standards ENT |
English PDF |
GB/T 5009.51-2003 |
Method for analysis of hygienicstandard of nonfermENTed bean products and gluten 非发酵性豆制品及面筋卫生标准的分析方法 |
China National Standards ENT |
English PDF |
GB/T 5009.168-2003 |
Determination of eicosapENTaenoic acid and docosahexaenoic acid in foods 食品中二十碳五烯酸和二十二碳六烯酸的测定 |
China National Standards ENT |
English PDF |
GB/T 4789.29-2003 |
Microbiological examination of food hygiene--Examination of Pseudomonas cocovenenans subsp. farinofermENTans 食品卫生微生物学检验 椰毒假单胞菌酵米面亚种检验 |
China National Standards ENT |
English PDF |
GB/T 4789.16-2003 |
Microbiological examination of food hygiene--IdENTification of common mycotoxin producing fungi 食品卫生微生物学检验 常见产毒霉菌的鉴定 |
China National Standards ENT |
English PDF |
GB/T 19260-2003 |
Structure requiremENTs of low floor city-bus and low entry city-bus 低地板及低入口城市客车结构要求 |
China National Standards ENT |
English PDF |
GB/T 10072-2003 |
Specifications of electronic flash equipmENTs for photograph 照相用电子闪光装置技术条件 |
China National Standards ENT |
English PDF |
GB/T 7156-2003 |
Codes and idENTification of secret level for documents 文献保密等级代码与标识 |
China National Standards ENT |
English PDF |
GB/T 2261.4-2003 |
Classificationand codes of basic personal information--Part 4: Codes for state of employmENT 个人基本信息分类与代码 第4部分: 从业状况(个人身份)代码 |
China National Standards ENT |
English PDF |
GB/T 19254-2003 |
ImplemENTation guidelines for electronic datainterchange message 电子数据交换报文实施指南 |
China National Standards ENT |
English PDF |
GB/T 16829-2003 |
Information technology--Automatic idENTification and data capture techniques--Bar code symbology specifications--Interleaved 2 of 5 信息技术 自动识别与数据采集技术 条码码制规范 交插二五条码 |
China National Standards ENT |
English PDF |
GB/T 10114-2003 |
Rules for the code represENTation of administrative divisions under counties 县级以下行政区划代码编制规则 |
China National Standards ENT |
English PDF |
GB/T 4679-2003 |
Specification of die-casting die componENTs 压铸模零件技术条件 |
China National Standards ENT |
English PDF |
GB/T 4678.9-2003 |
Die-casting die componENTs--Part 9: Ejector guide pillar 压铸模零件 第9部分: 推板导柱 |
China National Standards ENT |
English PDF |
GB/T 4678.8-2003 |
Die-casting die componENTs--Part 8: Ejectorplate 压铸模零件 第8部分: 推板 |
China National Standards ENT |
English PDF |
GB/T 4678.7-2003 |
Die-casting die componENTs--Part 7: Straight guide bush 压铸模零件 第7部分: 直导套 |
China National Standards ENT |
English PDF |
GB/T 4678.6-2003 |
Die-casting die componENTs--Part 6: Headed guide bush 压铸模零件 第6部分: 带头导套 |
China National Standards ENT |
English PDF |
GB/T 4678.5-2003 |
Die-casting die componENTs--Part 5: Headed guide pillar 压铸模零件 第5部分: 带头导柱 |
China National Standards ENT |
English PDF |
GB/T 4678.4-2003 |
Die-casting die componENTs--Part 4: Shouldered guide pillar 压铸模零件 第4部分: 带肩导柱 |
China National Standards ENT |
English PDF |
GB/T 4678.3-2003 |
Die-casting die componENTs--Part 3: Rectangular insert block 压铸模零件 第3部分:矩形镶块 |
China National Standards ENT |
English PDF |
GB/T 4678.2-2003 |
Die-casting die componENTs--Part 2: Round insert block 压铸模零件 第2部分: 圆形镶块 |
China National Standards ENT |
English PDF |
GB/T 4678.19-2003 |
Die-casting die componENTs--Part 19: Locating element 压铸模零件 第19部分:定位元件 |
China National Standards ENT |
English PDF |
GB/T 4678.18-2003 |
Die-casting die componENTs--Part 18: Support pillar 压铸模零件 第18部分:支承柱 |
China National Standards ENT |
English PDF |
GB/T 4678.17-2003 |
Die-casting die componENTs--Part 17: Ejector sleeve 压铸模零件 第17部分:推管 |
China National Standards ENT |
English PDF |
GB/T 4678.16-2003 |
Die-casting die componENTs--Part 16: Flat ejector pin 压铸模零件 第16部分:扁推杆 |
China National Standards ENT |
English PDF |
GB/T 4678.15-2003 |
Die-casting die componENTs--Part 15: Spacer block 压铸模零件 第15部分:垫块 |
China National Standards ENT |
English PDF |
GB/T 4678.14-2003 |
Die-casting die componENTs--Part 14: Stop pin 压铸模零件 第14部分:限位钉 |
China National Standards ENT |
English PDF |
GB/T 4678.13-2003 |
Die-casting die componENTs--Part 13: Ejector plate washer 压铸模零件 第13部分:推板垫圈 |
China National Standards ENT |
English PDF |
GB/T 4678.12-2003 |
Die-casting die componENTs--Part 12: Return pin 压铸模零件 第12部分:复位杆 |
China National Standards ENT |
English PDF |
GB/T 4678.1-2003 |
Die-casting die componENTs--Part 1: Mould plate 压铸模零件 第1部分:模板 |
China National Standards ENT |
English PDF |
GB/T 4678.11-2003 |
Die-casting die componENTs--Part 11: Ejector pin 压铸模零件 第11部分:推杆 |
China National Standards ENT |
English PDF |
GB/T 4678.10-2003 |
Die-casting die componENTs--Part 10: Ejector guide bush 压铸模零件 第10部分:推板导套 |
China National Standards ENT |
English PDF |
GB/T 19249-2003 |
Reverse osmosis water treatmENT equipment 反渗透水处理设备 |
China National Standards ENT |
English PDF |
GB/T 11685-2003 |
MeasuremENT procedures for semiconductor X-ray detector system and semiconductor X-ray energyspectrometers 半导体X射线探测器系统和半导体X射线能谱仪的测量方法 |
China National Standards ENT |
English PDF |
GB/T 5560-2003 |
Nonionic surface active agENTs--Determination of polyethylene glycols and non-ionic active matter(adducts)--Weilbull method 非离子表面活性剂 聚乙二醇含量和非离子活性物(加成物)含量的测定 Weilbull法 |
China National Standards ENT |
English PDF |
GB/T 5556-2003 |
Surface active agENTs--Test method for alkaline stability 表面活性剂 耐碱性测试法 |
China National Standards ENT |
English PDF |
GB/T 5555-2003 |
Surface active agENTs--Test method for acid stability 表面活性剂 耐酸性测试法 |
China National Standards ENT |
English PDF |
GB/T 5211.2-2003 |
Determination of matter soluble in water of pigmENTs--Hot extraction method 颜料水溶物测定 热萃取法 |
China National Standards ENT |
English PDF |
GB/T 5211.1-2003 |
Determination of matter soluble in water of pigmENTs--Cold extraction method 颜料水溶物测定 冷萃取法 |
China National Standards ENT |
English PDF |
GB/T 19247.2-2003 |
Printed board assemblies--Part 2: Sectional specification--RequiremENTs for surface mount solderedassemblies 印制板组装 第2部分: 分规范 表面安装焊接组装的要求 |
China National Standards ENT |
English PDF |
GB/T 19247.1-2003 |
Printed board assemblies--Part 1: Generic specification--RequiremENTs for soldered electrical and electronic assemblies using surface mount and related assembly technologies 印制板组装 第1部分:通用规范 采用表面安装和相关组装技术的电子和电气焊接组装的要求 |
China National Standards ENT |
English PDF |
GB/T 19230.6-2003 |
Test method for evaluating gasoline detergENT in use--Part 6: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(M111 method) 评价汽油清净剂使用效果的试验方法 第6部分:汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(M111法) |
China National Standards ENT |
English PDF |
GB/T 19230.5-2003 |
Test method for evaluating gasoline detergENT in use--Part 5: Engine dynamometer test method for influence of intake valve and combustion chamber deposit tendencies of gasoline detergent(Ford 2.3L method) 评价汽油清净剂使用效果的试验方法 第5部分: 汽油清净剂对汽油机进气阀和燃烧室沉积物生成倾向影响的发动机台架试验方法(Ford 2.3L方法) |
China National Standards ENT |
English PDF |
GB/T 19230.4-2003 |
Test method for evaluating gasoline detergENT in use--Part 4: Test method for influence of induction system deposit(ISD)tendencies of gasoline detergent 评价汽油清净剂使用效果的试验方法 第4部分: 汽油清净剂对汽油机进气系统沉积物(ISD)生成倾向影响的试验方法 |
China National Standards ENT |
English PDF |
GB/T 19230.3-2003 |
Test method for evaluating gasoline detergENT in use--Part 3: Test method for evaluating gasoline detergent produced effect forelectronic port fuel injector(PFI) fouling 评价汽油清净剂使用效果的试验方法 第3部分: 汽油清净剂对电子孔式燃油喷嘴(PFI)堵塞倾向影响的试验方法 |
China National Standards ENT |
English PDF |
GB/T 19230.2-2003 |
Test method for evaluating gasoline detergENT in use--Part 2: Test method for demulsibility of gasoline detergent 评价汽油清净剂使用效果的试验方法 第2部分: 汽油清净剂破乳性能试验方法 |
China National Standards ENT |
English PDF |
GB/T 19230.1-2003 |
Test method for evaluating gasoline detergENT in use--Part 1: Test method for rust-preventing characteristics of gasoline detergent 评价汽油清净剂使用效果的试验方法 第1部分:汽油清净剂防锈性能试验方法 |
China National Standards ENT |
English PDF |
GB/T 12538-2003 |
Road vehicles with two axles--Determination of cENTre of gravity 两轴道路车辆 重心位置的测定 |
China National Standards ENT |
English PDF |
GB 19210-2003 |
Cleaning code for air duct system in heating,vENTilating and air-conditioning systems 空调通风系统清洗规范 |
China National Standards ENT |
English PDF |
GB/Z 19219-2003 |
Industrial automation--Time-critical communications architectures--User requiremENTs and network management for time-critical communications systems 工业自动化 时限通信体系结构 时限通信系统的用户需求和网络管理 |
China National Standards ENT |
English PDF |
GB/T 19216.25-2003 |
Tests for electric cables under fire conditions--Circuit integrity--Part 25: Procedures and requiremENTs--Optical fibre cables 在火焰条件下电缆或光缆的线路完整性试验 第25部分: 试验步骤和要求 光缆 |
China National Standards ENT |
English PDF |
GB/T 19216.23-2003 |
Tests for electric cables under fire conditions--Circuit integrity--Part 23:Procedures and requiremENTs--Electric data cables 在火焰条件下电缆或光缆的线路完整性试验 第23部分: 试验步骤和要求 数据电缆 |
China National Standards ENT |
English PDF |
GB/T 19216.21-2003 |
Tests for electric cables under fire conditions--Circuit integrity--Part 21: Procedures and requiremENTs--Cables of rated voltage up to and including 0.6/1.0kV 在火焰条件下电缆或光缆的线路完整性试验 第21部分:试验步骤和要求 额定电压0.6/1.0 kV及以下电缆 |
China National Standards ENT |
English PDF |
GB/T 19215.2-2003 |
Cable trunking and ducting systems for electrical installations--Part 2: Particular requiremENTs--Section 1: Cable trunking and ducting systems intended for mounting on walls or ceilings 电气安装用电缆槽管系统 第2部分:特殊要求 第1节:用于安装在墙上或天花板上的电缆槽管系统 |
China National Standards ENT |
English PDF |
GB/T 19215.1-2003 |
Cable trunking and ducting systems for electrical installations--Part 1: General requiremENTs 电气安装用电缆槽管系统 第1部分:通用要求 |
China National Standards ENT |
English PDF |
GB 12664-2003 |
General specification for portable X-ray security inspection equipmENT 便携式X射线安全检查设备通用规范 |
China National Standards ENT |
English PDF |
GB/T 17006.9-2003 |
Evaluation and routine testing in medical imaging departmENTs--Part 2-10: Constancy tests--X-ray equipment for mammography 医用成像部门的评价及例行试验 第2-10部分:稳定性试验 乳腺X射线摄影设备 |
China National Standards ENT |
English PDF |
GB/T 17006.8-2003 |
Evaluation and routine testing in medical imaging departmENTs--Part 2-9: Constancy tests--Equipment for indirect radioscopy and indirect radiography 医用成像部门的评价及例行试验 第2-9部分: 稳定性试验 间接透视和间接摄影X射线设备 |
China National Standards ENT |
English PDF |
GB/T 17006.7-2003 |
Evaluation and routine testing in medical imaging departmENTs--Part 2-7: Constancy tests--Equipment for intra-oral dental radiography excluding dental panoramic equipment 医用成像部门的评价及例行试验 第2-7部分: 稳定性试验 口内牙科X射线摄影设备不包括牙科全景设备 |
China National Standards ENT |
English PDF |
GB/T 17006.10-2003 |
Evaluation and routine testing in medical imaging departmENTs--Part 2-11: Constancy tests--Equipment for general direct radiography 医用成像部门的评价及例行试验 第2-11部分:稳定性试验 普通直接摄影X射线设备 |
China National Standards ENT |
English PDF |
GB 9706.22-2003 |
Medical electricalequipmENT--Part 2: Particular requirements for the safety of equipment for extracorporeally induced lithotripsy 医用电气设备 第2部分: 体外引发碎石设备安全专用要求 |
China National Standards ENT |
English PDF |
GB/T 19206-2003 |
Natural gas--Organic sulfurcompounds used as odorants--RequiremENTs and test methods 天然气用有机硫化合物加臭剂的要求和测试方法 |
China National Standards ENT |
English PDF |
GB/T 19203-2003 |
Determination of calcium,magnesium andsulphur contENT for compound fertilizer 复混肥料中钙、镁、硫含量的测定 |
China National Standards ENT |
English PDF |
GB/T 14540-2003 |
Determination of copper,iron,manganese,zinc,boron and molybdenum contENT for compound fertilizers 复混肥料中铜、铁、锰、锌、硼、钼含量的测定 |
China National Standards ENT |
English PDF |
GB/T 19199-2003 |
Test method for carbon concENTration of semi-insulating monocrystal gallium arsenide by measurement infrared absorption method 半绝缘砷化镓单晶中碳浓度的红外吸收测试方法 |
China National Standards ENT |
English PDF |
Find out:19702Items | To Page of: First -Previous-Next -Last | [169] [170] [171] [172] [173] [174] [175] |