GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 15340-2008 |
Rubber,raw natural and raw synthetic-Sampling and further prEPArative procedures 天然、合成生胶取样及其制样方法 |
China National Standards EPA |
English PDF |
GB/T 13288.1-2008 |
PrEPAration of steel substrates before application of paints and related products-Surface roughness characteristics of blast-cleaned substrates - Part 1: Specifications and definitions for ISO surface profile comparators for the assessment of abrasive bl 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第1部分: 用于评定喷射清理后钢材表面粗糙度的ISO表面粗糙度比较样块的技术要求和定义 |
China National Standards EPA |
English PDF |
GB/T 985.4-2008 |
Recommended joint prEPAration for welding on clad steels 复合钢的推荐坡口 |
China National Standards EPA |
English PDF |
GB/T 985.3-2008 |
Recommended joint prEPAration for gas-shield arc welding on aluminium and its alloys 铝及铝合金气体保护焊的推荐坡口 |
China National Standards EPA |
English PDF |
GB/T 985.2-2008 |
Recommended joint prEPAration for submerged arc welding 埋弧焊的推荐坡口 |
China National Standards EPA |
English PDF |
GB/T 985.1-2008 |
Recommended joint prEPAration for gas welding, manual metal arc welding, gas-shield arc welding and beam welding 气焊、焊条电弧焊、气体保护焊和高能束焊的推荐坡口 |
China National Standards EPA |
English PDF |
GB/T 6988.1-2008 |
PrEPAration of documents used in electrotechnology - Part 1: Rules 电气技术用文件的编制 第1部分:规则 |
China National Standards EPA |
English PDF |
GB/T 17680.12-2008 |
Criteria for emergency planning and prEPAredness for nuclear power plants - Part 12:planning, development, conduct, and evaluation of nuclear emergency drills and exercises 核电厂应急计划与准备准则 第12部分:核应急练习与演习的计划、准备、实施与评估 |
China National Standards EPA |
English PDF |
GB/T 17680.11-2008 |
Criteria for emergency planning and prEPAredness for nuclear power plants - part 11: Criteria for the conduct of offsite radiological assessment for emergency response 核电厂应急计划与准备准则 第11部分:应急响应时的场外放射评价准则 |
China National Standards EPA |
English PDF |
GB/T 21461.2-2008 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: PrEPAration of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards EPA |
English PDF |
GB/T 21460.2-2008 |
Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: PrEPAration of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards EPA |
English PDF |
GB/T 21358-2008 |
Specifications for aviation jet fuel filter/sEPArators 喷气燃料过滤分离器通用技术规范 |
China National Standards EPA |
English PDF |
GB/T 21357-2008 |
Specification for similarity Jet fuel filter/sEPArators 喷气燃料过滤分离器相似性技术规范 |
China National Standards EPA |
English PDF |
GB/T 21338-2008 |
Certification requirements for practitioners of motor vehicle maintenance and rEPAir 机动车维修从业人员从业资格条件 |
China National Standards EPA |
English PDF |
GB/T 21286-2007 |
REPAir of pneumatic tyres 充气轮胎修补 |
China National Standards EPA |
English PDF |
GB/T 15970.9-2007 |
Corrosion of metal and alloys - Stress corrosion testing - Part 9: PrEPAration and use of pre-cracked specimens for tests under rising load or rising displacement 金属和合金的腐蚀 应力腐蚀试验 第9部分:渐增式载荷或渐增式位移下的预裂纹试样的制备和应用 |
China National Standards EPA |
English PDF |
GB/T 15970.6-2007 |
Corrosion of metals and alloys - Stress corrosion testing - Part 6: PrEPAration and use of pre-cracked specimens for tests under constant load or constant displacement 金属和合金的腐蚀 应力腐蚀试验 第6部分:恒载荷或恒位移下的预裂纹试样的制备和应用 |
China National Standards EPA |
English PDF |
GB/T 6730.46-2006 |
Iron ores - Determination of arsenic content - Arseno-molybdenum blue spectrophotometric method after the distillation sEPAration 铁矿石 砷含量的测定 蒸馏分离-砷钼蓝分光光度法 |
China National Standards EPA |
English PDF |
GB/T 6730.45-2006 |
Iron ores - Determination of arsenic content - Arseno-molybdenum blue spectrophotometric method after hydrogen arsenide sEPAration 铁矿石 砷含量的测定 砷化氢分离-砷钼蓝分光光度法 |
China National Standards EPA |
English PDF |
GB/T 19042.5-2006 |
Evaluation and routine testing in medical imaging dEPArtments - Part 3-5: Acceptance tests-Imaging performances of computed tomography X-ray equipment 医用成像部门的评价及例行试验 第3-5部分:X射线计算机体层摄影设备成像性能验收试验 |
China National Standards EPA |
English PDF |
GB/T 20535-2006 |
Means of transport dEPArture advice message based on XML 基于XML的运输工具驶离通知报文 |
China National Standards EPA |
English PDF |
GB/T 2941-2006 |
Rubber - General procedures for prEPAring and conditioning test pieces for physical test methods 橡胶物理试验方法试样制备和调节通用程序 |
China National Standards EPA |
English PDF |
GB/T 7178.2-2006 |
The operating for railway shunting―Part 2: PrEPAring operation 铁路调车作业 第2部分:准备作业 |
China National Standards EPA |
English PDF |
GB 20713-2006 |
Food additive - a-acetolactate decarboxylase prEPAration 食品添加剂 a-乙酰乳酸脱羧酶制剂 |
China National Standards EPA |
English PDF |
GB/T 6988.5-2006 |
PrEPAration of documents used in electrotechnology - Part 5: Index 电气技术用文件的编制 第5部分:索引 |
China National Standards EPA |
English PDF |
GB/T 20171-2006 |
EPA system architecture and communication specification for use in industrial control and measurement systems 用于工业测量与控制系统的EPA系统结构与通信规范 |
China National Standards EPA |
English PDF |
GB/T 6038-2006 |
Rubber test mixes―PrEPAration,mixing and vulcanization―Equipment and procedures 橡胶试验胶料 配料、混炼和硫化设备及操作程序 |
China National Standards EPA |
English PDF |
GB/T 20143-2006 |
Procedure for use in the prEPAration of maximum lamp outlines 灯最大外形尺寸图的制定程序 |
China National Standards EPA |
English PDF |
GB/T 20127.5-2006 |
Steel and alloy - Determination of trace element contents Part 5: Determination of gallium content by extraction sEPAration-rhodamine B photometric method 钢铁及合金 痕量元素的测定 第5部分:萃取分离-罗丹明B光度法 测定镓含量 |
China National Standards EPA |
English PDF |
GB/T 20195-2006 |
Animal feeding stuffs - PrEPAration of test samples 动物饲料 试样的制备 |
China National Standards EPA |
English PDF |
GB/T 20117-2006 |
Fine ceramics (advanced ceramics, advanced technical ceramics) - Sample prEPAration for the determination of particle size distribution of ceramic powders 精细陶瓷粉体颗粒尺寸分布测试用样品的制备 |
China National Standards EPA |
English PDF |
GB/T 20103-2006 |
Technical terms for membrane sEPAration 膜分离技术 术语 |
China National Standards EPA |
English PDF |
GB/T 20063.12-2006 |
Graphical symbols for diagrams -Part 12: Devices for sEPArating purification and mixing 简图用图形符号 第12部分:分离、净化和混合的装置 |
China National Standards EPA |
English PDF |
GB/T 20099-2006 |
Sample prEPAration - Dispersing procedures for powders in liquids 样品制备-粉末在液体中的分散方法 |
China National Standards EPA |
English PDF |
GB/T 20066-2006 |
Steel and iron -- Sampling and prEPAration of samples for the determination of chemical composition 钢和铁 化学成分测定用试样的取样和制样方法 |
China National Standards EPA |
English PDF |
GB/T 13448-2006 |
Test methods for PrEPAinted Steel Sheet 彩色涂层钢板及钢带试验方法 |
China National Standards EPA |
English PDF |
GB/T 12754-2006 |
PrEPAinted Steel Sheet 彩色涂层钢板及钢带 |
China National Standards EPA |
English PDF |
GB/T 20417.2-2006 |
Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: PrEPAration of test specimens and determination of properties 塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards EPA |
English PDF |
GB/T 1845.2-2006 |
Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: PrEPAration of test specimens and determination of properties 塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards EPA |
English PDF |
GB/T 20370-2006 |
Biocatalyst Guideline for enzyme prEPAration nomenclature 生物催化剂 酶制剂-分类导则 |
China National Standards EPA |
English PDF |
GB/T 20171-2006 |
EPA system architecture and communication specification for use in industrial control and measurement systems 用于工业测量与控制系统的EPA系统结构与通信规范 |
China National Standards EPA |
English PDF |
GB/T 19954.1-2005 |
Electromagnetic compatibility-Product family standard for audio,video,audio-visual and entertainment lighting control apparatus for professional usEPArt 1.Emission 电磁兼容 专业用途的音频、视频、音视频和娱乐场所灯光控制设备的产品类标准 第1部分 发射 |
China National Standards EPA |
English PDF |
GB/T 12032-2005 |
Paper and board-prEPAration of a offset print for test gloss 纸和纸板 印刷光泽度印样的制备 |
China National Standards EPA |
English PDF |
GB/T 19925-2005 |
Hydraulic fluid power-Gas-loaded Accumulators with sEPArator-Selection of preferred hydraulic port 液压传动 隔离式充气蓄能器 优先选择的液压油口 |
China National Standards EPA |
English PDF |
GB/T 19816.7-2005 |
PrEPAration of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 7:Determination of moisture 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第7部分:含水量的测定 |
China National Standards EPA |
English PDF |
GB/T 19816.6-2005 |
PrEPAration of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 6:Determination of foreign matter 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第6部分:外来杂质的测定 |
China National Standards EPA |
English PDF |
GB/T 19816.5-2005 |
PrEPAration of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 5:Determination of percentage defective particles and of microstructure 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第5部分:缺陷颗粒百分比和微结构的测定 |
China National Standards EPA |
English PDF |
GB/T 18570.9-2005 |
PrEPAration of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 9:Field method for the conductometric determination of water-soluble salts 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第9部分:水溶性盐的现场电导率测定法 |
China National Standards EPA |
English PDF |
GB/T 18570.8-2005 |
PrEPAration of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 8:Field method for the refractometric determination of moisture 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第8部分:湿气的现场折射测定法 |
China National Standards EPA |
English PDF |
GB/T 18570.5-2005 |
PrEPAration of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 5:Measurement of chloride on surfaces prepared for painting(ion detection tube method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第5部分:涂覆涂料前钢材表面的氯化物测定(离子探测管法) |
China National Standards EPA |
English PDF |
GB/T 18570.3-2005 |
PrEPAration of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 3:Assessment of dust on steel surface prepared for painting(pressure-sensitive tape method) 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第3部分:涂覆涂料前钢材表面的灰尘评定(压敏粘带法) |
China National Standards EPA |
English PDF |
GB/T 18570.10-2005 |
PrEPAration of steel substrates before application of paints and related products-Tests for the assessment of surface cleanliness-Part 10:Field method for the titrimetric determination of water-soluble chloride 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第10部分:水溶性氯化物的现场滴定测定法 |
China National Standards EPA |
English PDF |
GB/T 5624-2005 |
Motor vehicle maintenance and rEPAir terms 汽车维修术语 |
China National Standards EPA |
English PDF |
GB/T 19833-2005 |
Coal prEPAration plant-Assessment of the liability to breakdown in water of materials associated with coal seams 选煤厂 煤伴生矿物泥化程度测定 |
China National Standards EPA |
English PDF |
GB/T 7781-2005 |
The model designation of sEPArators 分离机 型号编制方法 |
China National Standards EPA |
English PDF |
GB/T 19832-2005 |
Petroleum and natural gas industries-Drilling and production equipment-Inspection,maintenance,rEPAir and remanufacture of hoisting equipment 石油天然气工业 钻井和采油提升设备的检验、维护、修理和改造 |
China National Standards EPA |
English PDF |
GB 19814-2005 |
Safety Requirements for SEPArator 分离机 安全要求 |
China National Standards EPA |
English PDF |
GB/T 19816.4-2005 |
PrEPAration of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 4:Determination of apparent density 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第4部分:表观密度的测定 |
China National Standards EPA |
English PDF |
GB/T 19816.3-2005 |
PrEPAration of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 3:Determination of hardness 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第3部分:硬度的测定 |
China National Standards EPA |
English PDF |
GB/T 19816.2-2005 |
PrEPAration of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 2:Determination of particle size distribution 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第2部分:颗粒尺寸分布的测定 |
China National Standards EPA |
English PDF |
GB/T 19816.1-2005 |
PrEPAration of steel substrates before application of paints and related products-Test methods for metallic blast-cleaning abrasives-Part 1:Sampling 涂覆涂料前钢材表面处理 喷射清理用金属磨料的试验方法 第1部分:抽样 |
China National Standards EPA |
English PDF |
GB/T 6058-2005 |
Test method for prEPAration and internal pressure testing of filament-wound pressure vessels 纤维缠绕压力容器制备和内压试验方法 |
China National Standards EPA |
English PDF |
GB/T 4550-2005 |
PrEPAration of unidirection or ientated fiber reinforced plastic plates for test purposes 试验用单向纤维增强塑料平板的制备 |
China National Standards EPA |
English PDF |
GB/T 10248-2005 |
Gas analysis-PrEPAration of calibration gas mixtures-Static volumetric methods 气体分析 校准用混合气体的制备 静态体积法 |
China National Standards EPA |
English PDF |
GB/T 15970.8-2005 |
Corrosion of metals and alloys-Stress corrosion test Part8:PrEPAration and use of specimens to evaluate weldments 金属和合金的腐蚀 应力腐蚀试验 第8部分:焊接试样的制备和应用 |
China National Standards EPA |
English PDF |
GB/T 16886.12-2005 |
Biological evaluation of medical devices-Part 12:Sample prEPAration and reference materials 医疗器械生物学评价 第12部分:样品制备与参照样品 |
China National Standards EPA |
English PDF |
GB/T 19809-2005 |
Plastics pipes and fittings-PrEPAration of polyethylene(PE)pipe/pipe or pipe/fitting test piece assemblies by butt fusion 塑料管材和管件 聚乙烯(PE)管材/管材或管材/管件热熔对接组件的制备 |
China National Standards EPA |
English PDF |
GB/T 19807-2005 |
Plastics pipes and fittings PrEPAration of test piece assemblies between a polyethylene(PE)pipe and an electrofusion fitting 塑料管材和管件 聚乙烯管材和电熔管件 组合试件的制备 |
China National Standards EPA |
English PDF |
GB/T 5336-2005 |
REPAir specification for large passenger vehicle body 大客车车身修理技术条件 |
China National Standards EPA |
English PDF |
GB/T 19679-2005 |
Information technology-Coded graphic character set for use in the PrEPAration of documents used in electrotechnology and for information interchange 信息技术--用于电工技术文件起草和信息交换的编码图形字符集 |
China National Standards EPA |
English PDF |
GB/T 19678-2005 |
PrEPAration of instructions-Structuring,content and presentation 说明书的编制--构成、内容和表示方法 |
China National Standards EPA |
English PDF |
GB/T 19042.4-2005 |
Evaluation and routine testing in medical imaging dEPArtments-Part 3-4:Acceptance tests-Imaging performance of dental X-ray equipment 医用成像部门的评价及例行试验 第3-4部分:牙科X射线设备成像性能验收试验 |
China National Standards EPA |
English PDF |
GB/T 19042.3-2005 |
Evaluation and routine testing in medical imaging dEPArtments-Part 3-3:Acceptance tests-Imaging performance of X-ray equipment for digital subtraction angiography(DSA) 医用成像部门的评价及例行试验 第3-3部分:数字减影血管造影(DSA)X射线设备成像性能验收试验 |
China National Standards EPA |
English PDF |
GB/T 19042.2-2005 |
Evaluation and routine testing in medical imaging dEPArtments-Part 3-2:Acceptance tests-Imaging performance of mammographic X-ray equipment 医用成像部门的评价及例行试验 第3-2部分:乳腺摄影X射线设备成像性能验收试验 |
China National Standards EPA |
English PDF |
GB/T 7235-2004 |
Geometrical Product Specifications(GPS)--Methods for the assessment of dEPArture from roundness--Measurement of variations in radius 产品几何量技术规范(GPS) 评定圆度误差的方法 半径变化量测量 |
China National Standards EPA |
English PDF |
GB/T 4380-2004 |
Assessment of dEPArture from roundness--Two-and three-point methods 圆度误差的评定 两点、三点法 |
China National Standards EPA |
English PDF |
GB/T 11337-2004 |
Measurement of dEPArtures from flatness 平面度误差检测 |
China National Standards EPA |
English PDF |
GB/T 11336-2004 |
Measurement of dEPArtures from straightness 直线度误差检测 |
China National Standards EPA |
English PDF |
GB/T 6002.10-2004 |
Textile machinery terminology--Part 10:PrEPAring machinery of warp for weaving 纺织机械术语 第10部分:织造前经纱准备机械 |
China National Standards EPA |
English PDF |
GB/T 19550-2004 |
Textile machinery and accessories--PrEPAring machinery of warp for weaving--Definition of left and right sides 纺织机械与附件 织造前经纱准备机械 左右侧定义 |
China National Standards EPA |
English PDF |
GB/T 10895-2004 |
Centrifuge and sEPArator--Measurementmethod of mechanical vibration 离心机 分离机 机械振动测试方法 |
China National Standards EPA |
English PDF |
GB/T 10894-2004 |
Determination method of noise emitted by sEPArating machine 分离机械 噪声测试方法 |
China National Standards EPA |
English PDF |
GB/T 19494.2-2004 |
Mechanical sampling of coal--Part 2:Method for sample prEPAration 煤炭机械化采样 第2部分:煤样的制备 |
China National Standards EPA |
English PDF |
GB/T 19495.7-2004 |
Detection of genetically modified organisms and derived products--Methods for sampling and sample prEPAration 转基因产品检测 抽样和制样方法 |
China National Standards EPA |
English PDF |
GB/T 6609.23-2004 |
Chemical analysis methods and determination of physical performance of alumina--PrEPAration andstorage of test samples 氧化铝化学分析方法和物理性能测定方法 试样的制备和贮存 |
China National Standards EPA |
English PDF |
GB/T 7321-2004 |
Sample prEPAration for testing of shaped refractory products 定形耐火制品试样制备方法 |
China National Standards EPA |
English PDF |
GB/T 2352-2003 |
Hydraulic fluid power--Gas-loaded accumulators with sEPArator--Ranges of pressures and volumes and characteristic quantities 液压传动 隔离式充气蓄能器压力和容积范围及特征量 |
China National Standards EPA |
English PDF |
GB/T 17934.3-2003 |
Graphic technology--Process control for the manufacture of half-tone colour sEPArations,proofs and production prints--Part 3: Coldset offsetlithography on newsprints 印刷技术 网目调分色片、样张和印刷成品的加工过程控制 第3部分: 新闻纸的冷固型油墨胶印 |
China National Standards EPA |
English PDF |
GB/T 17006.9-2003 |
Evaluation and routine testing in medical imaging dEPArtments--Part 2-10: Constancy tests--X-ray equipment for mammography 医用成像部门的评价及例行试验 第2-10部分:稳定性试验 乳腺X射线摄影设备 |
China National Standards EPA |
English PDF |
GB/T 17006.8-2003 |
Evaluation and routine testing in medical imaging dEPArtments--Part 2-9: Constancy tests--Equipment for indirect radioscopy and indirect radiography 医用成像部门的评价及例行试验 第2-9部分: 稳定性试验 间接透视和间接摄影X射线设备 |
China National Standards EPA |
English PDF |
GB/T 17006.7-2003 |
Evaluation and routine testing in medical imaging dEPArtments--Part 2-7: Constancy tests--Equipment for intra-oral dental radiography excluding dental panoramic equipment 医用成像部门的评价及例行试验 第2-7部分: 稳定性试验 口内牙科X射线摄影设备不包括牙科全景设备 |
China National Standards EPA |
English PDF |
GB/T 17006.10-2003 |
Evaluation and routine testing in medical imaging dEPArtments--Part 2-11: Constancy tests--Equipment for general direct radiography 医用成像部门的评价及例行试验 第2-11部分:稳定性试验 普通直接摄影X射线设备 |
China National Standards EPA |
English PDF |
GB/T 19209.2-2003 |
Examine general rule of rEPAir quality for tractor--Part 2: Caterpillar tractor 拖拉机修理质量检验通则 第2部分: 履带拖拉机 |
China National Standards EPA |
English PDF |
GB/T 19209.1-2003 |
Examine general rule of rEPAir quality for tractor--Part 1: Wheeled tractor 拖拉机修理质量检验通则 第1部分:轮式拖拉机 |
China National Standards EPA |
English PDF |
GB/T 19094-2003 |
Coal prEPAration plant--Principles and conventions for flow sheets 选煤厂 流程图原则和规定 |
China National Standards EPA |
English PDF |
GB/Z 19091.1-2003 |
Definitions and attributes of data elements for control and monitoring of textile processes--Part 1: Spinning,spinning prEPAratory and related processes 纺织工艺监控用数据元素的定义和属性 第1部分:纺、纺前准备及相关工艺 |
China National Standards EPA |
English PDF |
GB/T 7305-2003 |
Standard test method for water sEPArabilityof petroleum oils and synthetic fluids 石油和合成液水分离性测定法 |
China National Standards EPA |
English PDF |
GB/T 17680.9-2003 |
Criteria for emergency planning and prEPAredness for nuclear power plants--Maintenance of on-site emergency response capacity 核电厂应急计划与准备准则 场内应急响应能力的保持 |
China National Standards EPA |
English PDF |
GB/T 17680.8-2003 |
Criteria for emergency planning and prEPAredness for nuclear power plants--On-site emergency planning and implementing procedures 核电厂应急计划与准备准则 场内应急计划与执行程序 |
China National Standards EPA |
English PDF |
GB/T 17680.7-2003 |
Criteria for emergency planning and prEPAredness for nuclear power plants--Function and physical characteristics of on-site emergency facilities 核电厂应急计划与准备准则 场内应急设施功能与特性 |
China National Standards EPA |
English PDF |
Find out:708Items | To Page of: First -Previous-Next -Last | 1 2 3 4 5 6 7 8 |