GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 23561.7-2009 |
Methods for determining the physical and mechanical propertIEs of coal and rock - Part 7: Methods for determining the uniaxial compressive strength and counting softening coefficient 煤和岩石物理力学性质测定方法 第7部分:单轴抗压强度测定及软化系数计算方法 |
China National Standards IE |
English PDF |
GB/T 23561.6-2009 |
Methods for determining the physical and mechanical propertIEs of coal and rock - Part 6: Methods for determining the moisture content of coal and rock 煤和岩石物理力学性质测定方法 第6部分:煤和岩石含水率测定方法 |
China National Standards IE |
English PDF |
GB/T 23561.5-2009 |
Methods for determining the physical and mechanical propertIEs of coal and rock - Part 5: Methods for determining the water absorbability of coal and rock 煤和岩石物理力学性质测定方法 第5部分:煤和岩石吸水性测定方法 |
China National Standards IE |
English PDF |
GB/T 23561.4-2009 |
Methods for determining the physical and mechanical propertIEs of coal and rock - Part 4: Methods for calculating the porosity of coal and rock 煤和岩石物理力学性质测定方法 第4部分:煤和岩石孔隙率计算方法 |
China National Standards IE |
English PDF |
GB/T 23561.3-2009 |
Methods for determining the physical and mechanical propertIEs of coal and rock - Part 3: Methods for determining the block density of coal and rock 煤和岩石物理力学性质测定方法 第3部分:煤和岩石块体密度测定方法 |
China National Standards IE |
English PDF |
GB/T 23561.2-2009 |
Methods for determining the physical and mechanical propertIEs of coal and rock - Part 2: Methods for determining the true density of coal and rock 煤和岩石物理力学性质测定方法 第2部分:煤和岩石真密度测定方法 |
China National Standards IE |
English PDF |
GB/T 23561.1-2009 |
Methods for determining the physical and mechanical propertIEs of coal and rock - Part 1: General requirements for sampling 煤和岩石物理力学性质测定方法 第1部分:采样一般规定 |
China National Standards IE |
English PDF |
GB 19153-2009 |
Minimum allowable values of energy efficIEncy and energy efficiency grades for displacement air compressors 容积式空气压缩机能效限定值及能效等级 |
China National Standards IE |
English PDF |
GB/T 23511-2009 |
Petroleum and natural gas industrIEs - General requirements for offshore structures 石油天然气工业 海洋结构的一般要求 |
China National Standards IE |
English PDF |
GB/T 21412.9-2009 |
Petroleum and natural gas industrIEs - Design and operation of subsea production systems - Part 9: Remotely operated tool (ROT) intervention systems 石油天然气工业 水下生产系统的设计与操作 第9部分:遥控操作工具 (ROT) 维修系统 |
China National Standards IE |
English PDF |
GB/T 23470.1-2009 |
Sensory analysis - General guidance for the staff of a sensory evaluation laboratory - Part 1: Staff responsibilitIEs 感官分析 感官分析实验室人员一般导则 第1部分:实验室人员职责 |
China National Standards IE |
English PDF |
GB/T 23566.4-2009 |
Sliding guide steel-plate punch holders of stamping dIEs - Part 4: Four-pillar punch holders 冲模滑动导向钢板上模座 第4部分:四导柱上模座 |
China National Standards IE |
English PDF |
GB/T 23566.3-2009 |
Sliding guide steel-plate punch holders of stamping dIEs - Part 3: Center-pillar punch holders 冲模滑动导向钢板上模座 第3部分:中间导柱上模座 |
China National Standards IE |
English PDF |
GB/T 23566.2-2009 |
Sliding guide steel-plate punch holders of stamping dIEs - Part 2: Diagonal-pillar punch holders 冲模滑动导向钢板上模座 第2部分:对角导柱上模座 |
China National Standards IE |
English PDF |
GB/T 23566.1-2009 |
Sliding guide steel-plate punch holders of stamping dIEs - Part 1: Rear-pillar punch holders 冲模滑动导向钢板上模座 第1部分:后侧导柱上模座 |
China National Standards IE |
English PDF |
GB/T 23565.4-2009 |
Sliding guide steel-plate dIE sets of stamping dies - Part 4: Four-pillar die sets 冲模滑动导向钢板模架 第4部分:四导柱模架 |
China National Standards IE |
English PDF |
GB/T 23565.3-2009 |
Sliding guide steel-plate dIE sets of stamping dies - Part 3: Center-pillar die sets 冲模滑动导向钢板模架 第3部分:中间导柱模架 |
China National Standards IE |
English PDF |
GB/T 23565.2-2009 |
Sliding guide steel-plate dIE sets of stamping dies - Part 2: Diagonal-pillar die sets 冲模滑动导向钢板模架 第2部分:对角导柱模架 |
China National Standards IE |
English PDF |
GB/T 23565.1-2009 |
Sliding guide steel-plate dIE sets of stamping dies - Part 1: Rear-pillar die sets 冲模滑动导向钢板模架 第1部分:后侧导柱模架 |
China National Standards IE |
English PDF |
GB/T 23564.4-2009 |
Ball-bearing guide steel-plate punch holders of stamping dIEs - Part 4: Four-pillar punch holders 冲模滚动导向钢板上模座 第4部分:四导柱上模座 |
China National Standards IE |
English PDF |
GB/T 23564.3-2009 |
Ball-bearing guide steel-plate punch holders of stamping dIEs - Part 3: Center-pillar punch holders 冲模滚动导向钢板上模座 第3部分:中间导柱上模座 |
China National Standards IE |
English PDF |
GB/T 23564.2-2009 |
Ball-bearing guide steel-plate punch holders of stamping dIEs - Part 2: Diagonal-pillar punch holders 冲模滚动导向钢板上模座 第2部分:对角导柱上模座 |
China National Standards IE |
English PDF |
GB/T 23564.1-2009 |
Ball-bearing guide steel-plate punch holders of stamping dIEs - Part 1: Rear-pillar punch holders 冲模滚动导向钢板上模座 第1部分:后侧导柱上模座 |
China National Standards IE |
English PDF |
GB/T 23563.4-2009 |
Ball-bearing guide steel-plate dIE sets of stamping dies - Part 4: Four-pillar die sets 冲模滚动导向钢板模架 第4部分:四导柱模架 |
China National Standards IE |
English PDF |
GB/T 23563.3-2009 |
Ball-bearing guide steel-plate dIE sets of stamping dies - Part 3: Center-pillar die sets 冲模滚动导向钢板模架 第3部分:中间导柱模架 |
China National Standards IE |
English PDF |
GB/T 23563.2-2009 |
Ball-bearing guide steel-plate dIE sets of stamping dies - Part 2: Diagonal-pillar die sets 冲模滚动导向钢板模架 第2部分:对角导柱模架 |
China National Standards IE |
English PDF |
GB/T 23563.1-2009 |
Ball-bearing guide steel-plate dIE sets of stamping dies - Part 1: Rear-pillar die sets 冲模滚动导向钢板模架 第1部分:后侧导柱模架 |
China National Standards IE |
English PDF |
GB/T 23562.4-2009 |
Steel-plate dIE holders of stamping dies - Part 4: Four-pillar die holders 冲模钢板下模座 第4部分:四导柱下模座 |
China National Standards IE |
English PDF |
GB/T 23562.3-2009 |
Steel-plate dIE holders of stamping dies - Part 3: Center-pillar die holders 冲模钢板下模座 第3部分:中间导柱下模座 |
China National Standards IE |
English PDF |
GB/T 23562.2-2009 |
Steel-plate dIE holders of stamping dies - Part 2: Diagonal-pillar die holders 冲模钢板下模座 第2部分:对角导柱下模座 |
China National Standards IE |
English PDF |
GB/T 23562.1-2009 |
Steel-plate dIE holders of stamping dies - Part 1: Rear-pillar die holders 冲模钢板下模座 第1部分:后侧导柱下模座 |
China National Standards IE |
English PDF |
GB/T 23507.3-2009 |
Criterion for electriacl equipment for oil drilling rig - Part 3: The dIEsel generating set for electric drilling rig 石油钻机用电气设备规范 第3部分:电动钻机用柴油发电机组 |
China National Standards IE |
English PDF |
GB/T 21411.2-2009 |
Downhole equipment for petroleum and natural gas industrIEs - Progressing cavity pump systems for artificial lift - Part 2: Surface-drive systems 石油天然气工业井下设备 人工举升用螺杆泵系统 第2部分:地面驱动装置 |
China National Standards IE |
English PDF |
GB/T 15115-2009 |
DIE casting aluminum alloys 压铸铝合金 |
China National Standards IE |
English PDF |
GB/T 15114-2009 |
Aluminum alloy dIE castings 铝合金压铸件 |
China National Standards IE |
English PDF |
GB/T 13821-2009 |
Zinc alloy dIE castings 锌合金压铸件 |
China National Standards IE |
English PDF |
GB/T 13818-2009 |
DIE casting zinc alloys 压铸锌合金 |
China National Standards IE |
English PDF |
GB 15599-2009 |
Safety rules of lightning with relation to petroleum and its facilitIEs 石油与石油设施雷电安全规范 |
China National Standards IE |
English PDF |
GB/T 2884.2-2009 |
Integrated barges form for the middle-downstream of the Changjiang - Part 2: Dimensions serIEs of integrated barges for direct transport in main-branch routes and waterway net 长江中下游水系分节驳船型 第2部分:干支直达和水运网分节驳船型尺度系列 |
China National Standards IE |
English PDF |
GB/T 2884.1-2009 |
Integrated barges form for the middle-downstream of the Changjiang - Part 1: Dimensions serIEs of integrated barges in main routes 长江中下游水系分节驳船型 第1部分:干流分节驳船型尺度系列 |
China National Standards IE |
English PDF |
GB/T 23436-2009 |
Cleaning fluids for automotive windshIEld 汽车风窗玻璃清洗液 |
China National Standards IE |
English PDF |
GB/T 23433-2009 |
Dimensions serIEs of roll-on/roll-off truck ship passing the lock of the three gorges dam 三峡枢纽过坝载货汽车滚装船船型尺度系列 |
China National Standards IE |
English PDF |
GB/T 23432-2009 |
Dimensions serIEs of river/coastal cargo ship passing the lock of three gorges dam 三峡枢纽过坝江海直达货船尺度系列 |
China National Standards IE |
English PDF |
GB/T 17872-2009 |
Dimensions serIEs of river/coastal cargo ship 江海直达货船船型尺度系列 |
China National Standards IE |
English PDF |
GB/T 13561.3-2009 |
Safety rules on port’s continuous handling facilitIEs - Part 3: Belt conveyers,mass conveyer and bucket elevator 港口连续装卸设备安全规程 第3部分:带式输送机、埋刮板输送机和斗式提升机 |
China National Standards IE |
English PDF |
GB/T 23296.3-2009 |
Food contact materials - Determination of 1,3-butadIEne in plastics - Gas chromatography 食品接触材料 塑料中1,3-丁二烯含量的测定 气相色谱法 |
China National Standards IE |
English PDF |
GB/T 23296.2-2009 |
Food contact materials - Polymer - Determination of 1,3-butadIEne in food simulants - Gas chromatography 食品接触材料 高分子材料 食品模拟物中1,3-丁二烯的测定 气相色谱法 |
China National Standards IE |
English PDF |
GB/T 23296.18-2009 |
Food contact materials - Polymer - Determination of monoethylene glycol and dIEthylene glycol in food simulants - Gas chromatography 食品接触材料 高分子材料 食品模拟物中乙二醇与二甘醇的测定 气相色谱法 |
China National Standards IE |
English PDF |
GB/T 23401-2009 |
Product of geographical indication - Yanchuan drIEd chinese jujub 地理标志产品 延川红枣 |
China National Standards IE |
English PDF |
GB/T 5835-2009 |
DrIEd chinese jujubes 干制红枣 |
China National Standards IE |
English PDF |
GB/T 23353-2009 |
DrIEd pears - Specification and test methods 梨干 技术规格和试验方法 |
China National Standards IE |
English PDF |
GB/T 23352-2009 |
DrIEd apples - Specification and test methods 苹果干 技术规格和试验方法 |
China National Standards IE |
English PDF |
GB 23441-2009 |
Self-adhering polymer modifIEd bituminous waterproof sheet 自粘聚合物改性沥青防水卷材 |
China National Standards IE |
English PDF |
GB 18967-2009 |
ModifIEd bituminous waterproof sheet using polyethylene reinforcement 改性沥青聚乙烯胎防水卷材 |
China National Standards IE |
English PDF |
GB/T 23459-2009 |
Measurement and calculation method of heat balance and thermal efficIEncy for ceramic industrial kiln 陶瓷工业窑炉热平衡、热效率测定与计算方法 |
China National Standards IE |
English PDF |
GB/T 23457-2009 |
Pre-applIEd and wet installed waterproof sheets 预铺/湿铺防水卷材 |
China National Standards IE |
English PDF |
GB/T 23445-2009 |
Polymer-modifIEd cement compounds for waterproofing membrane 聚合物水泥防水涂料 |
China National Standards IE |
English PDF |
GB/T 14208.4-2009 |
Textile-glass-reinforced plastics - Determination of mechanical propertIEs on rods made of roving-reinforced resin - Part 4: Determination of apparent interlaminar shear strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第4部分:表观层间剪切强度的测定 |
China National Standards IE |
English PDF |
GB/T 14208.3-2009 |
Textile-glass-reinforced plastics - Determination of mechanical propertIEs on rods made of roving- reinforced resin - Part 3: Determination of compressive strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第3部分:压缩强度的测定 |
China National Standards IE |
English PDF |
GB/T 14208.2-2009 |
Textile-glass-reinforced plastics - Determination of mechanical propertIEs on rods made of roving- reinforced resin - Part 2: Determination of flexural strength 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第2部分:弯曲强度的测定 |
China National Standards IE |
English PDF |
GB/T 14208.1-2009 |
Textile-glass-reinforced plastics - Determination of mechanical propertIEs on rods made of roving-reinforced resin - Part 1: General considerations and preparation of rods 纺织玻璃纤维增强塑料 无捻粗纱增强树脂棒机械性能的测定 第1部分:通则和棒的制备 |
China National Standards IE |
English PDF |
GB/T 23430-2009 |
General technical specification for shunting dIEsel locomotive for urban rail transit 城市轨道交通内燃调车机车通用技术条件 |
China National Standards IE |
English PDF |
GB/T 23427-2009 |
Shipbuilding and marine structures - Eye and fork assemblIEs under tension load - Main dimensions 造船与海上结构物 受拉伸负荷的眼板和叉头组件 主要尺寸 |
China National Standards IE |
English PDF |
GB/T 23424-2009 |
TIE-down of overlimited (outsize or heavy) cargo on ULDs 超限货物在航空集装器上的捆绑固定 |
China National Standards IE |
English PDF |
GB/T 8746-2009 |
Textiles - Burning behaviour - Determination of ease of ignition of vertically orIEnted specimens 纺织品 燃烧性能 垂直方向试样易点燃性的测定 |
China National Standards IE |
English PDF |
GB/T 18737.8-2009 |
Textile machinery and accessorIEs - Beams for winding - Part 8: Definitions of run-out tolerances and methods of measurement 纺织机械与附件 经轴 第8部分:跳动公差的定义和测量方法 |
China National Standards IE |
English PDF |
GB/T 3917.5-2009 |
Textiles - Tear propertIEs of fabrics - Part 5: Determination of tear force of wing-shaped test specimens (Single tear method) 纺织品 织物撕破性能 第5部分:翼形试样(单缝)撕破强力的测定 |
China National Standards IE |
English PDF |
GB/T 3917.4-2009 |
Textiles - Tear propertIEs of fabrics - Part 4: Determination of tear force of tongue-shaped test specimens (Double tear test) 纺织品 织物撕破性能 第4部分:舌形试样(双缝)撕破强力的测定 |
China National Standards IE |
English PDF |
GB/T 3917.3-2009 |
Textiles - Tear propertIEs of fabrics - Part 3: Determination of tear force of trapezoid-shaped test specimens 纺织品 织物撕破性能 第3部分:梯形试样撕破强力的测定 |
China National Standards IE |
English PDF |
GB/T 3917.2-2009 |
Textiles - Tear propertIEs of fabrics - Part 2: Determination of tear force of trouser-shaped test specimens (Single tear method) 纺织品 织物撕破性能 第2部分:裤形试样(单缝)撕破强力的测定 |
China National Standards IE |
English PDF |
GB/T 3917.1-2009 |
Textiles - Tear propertIEs of fabrics - Part 1: Determination of tear force using ballistic pendulum method (Elmendorf) 纺织品 织物撕破性能 第1部分:冲击摆锤法撕破强力的测定 |
China National Standards IE |
English PDF |
GB/T 23365-2009 |
Electrochemical performance test of lithium cobalt oxide - Test method for specific capacity and charge-discharge efficIEncy of the first cycle 钴酸锂电化学性能测试 首次放电比容量及首次充放电效率测试方法 |
China National Standards IE |
English PDF |
GB/T 23326-2009 |
Stainless steel fibers and cotton-polyester blended grey fabric with electromagnetic shIElding performance 不锈钢纤维与棉涤混纺电磁波屏蔽本色布 |
China National Standards IE |
English PDF |
GB/T 23323-2009 |
Textiles - Determination of surfactant - Ethylene diamine tetra acetate and dIEthylene triamine penta acetate 纺织品 表面活性剂的测定 乙二胺四乙酸盐和二乙烯三胺五乙酸盐 |
China National Standards IE |
English PDF |
GB/T 23314-2009 |
NecktIEs 领带 |
China National Standards IE |
English PDF |
GB/T 23309-2009 |
Aluminium-magnesium alloy wires for shIEld in cable 电缆屏蔽用铝镁合金线 |
China National Standards IE |
English PDF |
GB/T 19520.15-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) serIEs - Part 3-104: Connector dependent interface dimensions of subracks and plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-104部分:基于连接器的插箱和插件的接口尺寸 |
China National Standards IE |
English PDF |
GB/T 19520.14-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) serIEs - Part 3-103: Keying and alignment pin 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-103部分:编码键和定位销 |
China National Standards IE |
English PDF |
GB/T 19520.13-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) serIEs - Part 3-102: Injector/extractor handle 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-102部分:插拔器手柄 |
China National Standards IE |
English PDF |
GB/T 19520.12-2009 |
Mechanical structures for electronic equipment - Dimensions of mechanical structures of the 482.6 mm (19 in) serIEs - Part 3-101: Subracks and associated plug-in units 电子设备机械结构 482.6mm(19in)系列机械结构尺寸 第3-101部分:插箱及其插件 |
China National Standards IE |
English PDF |
GB/T 8190.11-2009 |
Reciprocating internal combustion engines - Exhaust emission measurement - Part 11: Test-bet measurement of gaseous and particulate exhaust emissions from engines used in nonroad mobile machinery under transIEnt test conditions 往复式内燃机 排放测量 第11部分:非道路移动机械用发动机瞬态工况下气体和颗粒排放物的试验台测量 |
China National Standards IE |
English PDF |
GB/T 23332-2009 |
HumidifIErs 加湿器 |
China National Standards IE |
English PDF |
GB/T 3177-2009 |
Geometrical product specifications (GPS) - Inspection of plain workpIEce sizes 产品几何技术规范(GPS) 光滑工件尺寸的检验 |
China National Standards IE |
English PDF |
GB/T 18779.3-2009 |
Geometrical product specifications (GPS) - Inspection by measurement of workpIEces and measuring equipment - Part 3: Guidelines for achieving agreements on measurement uncertainty statements 产品几何技术规范(GPS) 工件与测量设备的测量检验 第3部分:关于对测量不确定度的表述达成共识的指南 |
China National Standards IE |
English PDF |
GB/T 14495-2009 |
Geometrical product specifications(GPS) - Surface texture: Profile method - Roughness comparison specimens for wooden pIEces 产品几何技术规范(GPS) 表面结构 轮廓法 木制件表面粗糙度比较样块 |
China National Standards IE |
English PDF |
GB/T 9109.5-2009 |
Petroleum and liquid petroleum products - Calculation of oil quantitIEs - Dynamic measurement 石油和液体石油产品油量计算 动态计量 |
China National Standards IE |
English PDF |
GB/T 23257-2009 |
Polyethylene coating for burIEd steel pipeline 埋地钢质管道聚乙烯防腐层 |
China National Standards IE |
English PDF |
GB/T 21412.6-2009 |
Petroleum and natural gas industrIEs - Design and operation of subsea production systems - Part 6: Subsea production control systems 石油天然气工业 水下生产系统的设计与操作 第6部分:水下生产控制系统 |
China National Standards IE |
English PDF |
GB/T 21412.3-2009 |
Petroleum and natural gas industrIEs - Design and operation of subsea production systems - Part 3: Through flowline (TFL) systems 石油天然气工业 水下生产系统的设计与操作 第3部分:过出油管(TFL)系统 |
China National Standards IE |
English PDF |
GB/T 5465.1-2009 |
Graphical symbols for use on electrical equipment - Part 1: OvervIEw and classification 电气设备用图形符号 第1部分:概述与分类 |
China National Standards IE |
English PDF |
GB/T 17567-2009 |
Clearance levels for recycle and reuse of steel、aluminum、nickel and copper from nuclear facilitIEs 核设施的钢铁、铝、镍和铜再循环、再利用的清洁解控水平 |
China National Standards IE |
English PDF |
GB/T 17564.4-2009 |
Standard data element types with associated classification scheme for electric components - Part 4: IEC reference collection of standard data element types and component classes 电气元器件的标准数据元素类型和相关分类模式 第4部分:IEC标准数据元素类型和元器件类别基准集 |
China National Standards IE |
English PDF |
GB/T 23289-2009 |
Bibliographic references and source identifIErs for terminology work 术语工作 文后参考文献及源标识符 |
China National Standards IE |
English PDF |
GB/T 9911-2009 |
Measure method of airborne noise emitted by marine dIEsel engine 船用柴油机辐射的空气噪声测量方法 |
China National Standards IE |
English PDF |
GB/T 18570.11-2009 |
Preparation of steel substrates before application of paints and related products - Tests for the assessment of surface cleanliness - Part 11: FIEld method for the turbidimetric determination of water-soluble sulfate 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第11部分:水溶性硫酸盐的现场浊度测定法 |
China National Standards IE |
English PDF |
GB/T 14363-2009 |
Measure method of lubricating oil consumption for dIEsel engines 柴油机机油消耗测定方法 |
China National Standards IE |
English PDF |
GB 11871-2009 |
Limits of airborne noise emitted by marine dIEsel engines 船用柴油机辐射的空气噪声限值 |
China National Standards IE |
English PDF |
GB 8840-2009 |
Limit for exhaust smoke of marine dIEsel engine 船用柴油机排气烟度限值 |
China National Standards IE |
English PDF |
GB/T 23291-2009 |
Machine tools - Test conditions for self-centring,manually-operated chucks with one-pIEce jaws 机床 整体爪手动自定心卡盘检验条件 |
China National Standards IE |
English PDF |
GB 9690-2009 |
HygIEnic standard for melamine - Formaldehyde products used as food containers and packaging materials 食品容器、包装材料用三聚氰胺-甲醛成型品卫生标准 |
China National Standards IE |
English PDF |
Find out:6237Items | To Page of: First -Previous-Next -Last | [34] [35] [36] [37] [38] [39] [40] |