GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 18690.4-2023 |
Agricultural irrigatIOn equipment - Filters for micro-irrigation - Part 4: Granular media filters 农业灌溉设备 微灌用过滤器 第4部分:颗粒介质过滤器 |
China National Standards IO |
English PDF |
GB/T 18688-2023 |
Agricultural irrigatIOn equipment - Pressure loss in irrigation valves - Test methods 农业灌溉设备 灌溉阀的压力损失 试验方法 |
China National Standards IO |
English PDF |
GB/T 24478-2023 |
Elevator tractIOn machine 电梯曳引机 |
China National Standards IO |
English PDF |
GB/T 43307-2023 |
DeterminatIOn of room temperature tensile properties of fine ceramic fiber single filaments 精细陶瓷纤维 单丝室温拉伸性能的测定 |
China National Standards IO |
English PDF |
GB/T 43325-2023 |
Foundry machinery - Cutting, grinding and finishing equipment for cleaning of castings - Technical safety regulatIOns 铸造机械 铸件清理用切割、磨削和精整设备 安全技术规范 |
China National Standards IO |
English PDF |
GB/T 43319-2023 |
Casting machinery Investment and lost foam casting equipment Safety technical specificatIOns 铸造机械 熔模和消失模铸造设备 安全技术规范 |
China National Standards IO |
English PDF |
GB/T 43356-2023 |
Test method for perIOdic infiltration of corrosion salt solution on steel bars 钢筋腐蚀盐溶液周期浸润试验方法 |
China National Standards IO |
English PDF |
GB/T 30163-2023 |
Technical SpecificatIOns for Energy Saving of High Air Temperature Top-Fired Hot Air Stoves for Blast Furnaces 高炉用高风温顶燃式热风炉节能技术规范 |
China National Standards IO |
English PDF |
GB/T 28924-2023 |
Guidelines for CalculatIOn of Energy Efficiency Index for Steel Enterprises 钢铁企业能效指数计算导则 |
China National Standards IO |
English PDF |
GB/T 21837-2023 |
Electromagnetic detectIOn method of ferromagnetic steel wire rope 铁磁性钢丝绳电磁检测方法 |
China National Standards IO |
English PDF |
GB/T 3286.12-2023 |
Methods for chemical analysis of limestone and dolomite Part 12: DeterminatIOn of potassium oxide and sodium oxide content Flame atomic absorption spectrometry 石灰石及白云石化学分析方法 第12部分:氧化钾和氧化钠含量的测定 火焰原子吸收光谱法 |
China National Standards IO |
English PDF |
GB/T 19267.1-2023 |
Forensic Science Physical and Chemical ExaminatIOn of Trace Evidence Part 1: Infrared Absorption Spectroscopy 法庭科学 微量物证的理化检验 第1部分:红外吸收光谱法 |
China National Standards IO |
English PDF |
GB/T 9485-2023 |
Radial flow turbocharger connectIOn dimensions 径流式涡轮增压器 联接尺寸 |
China National Standards IO |
English PDF |
GB/T 43343-2023 |
High voltage insulatIOn resistance meter 高压绝缘电阻表 |
China National Standards IO |
English PDF |
GB/T 43411-2023 |
Electron beam selective melting additive manufacturing machine tools general technical conditIOns 电子束选区熔化增材制造机床 通用技术条件 |
China National Standards IO |
English PDF |
GB/T 43338-2023 |
Manufacturing Services General Requirements for Business Data IntegratIOn 制造服务 业务数据集成通用要求 |
China National Standards IO |
English PDF |
GB/T 43337-2023 |
Manufacturing system equipment operatIOn and maintenance reference model 制造系统设备运维参考模型 |
China National Standards IO |
English PDF |
GB/T 43336-2023 |
General technical conditIOns for steering wheel control systems 舵轮控制系统通用技术条件 |
China National Standards IO |
English PDF |
GB/T 43335-2023 |
AutomatIOn system and integration technical resource sharing service system reference architecture 自动化系统与集成 技术资源共享服务系统参考架构 |
China National Standards IO |
English PDF |
GB/T 40283.4-2023 |
AutomatIOn Systems and Integration Competency Unit Interoperability for Manufacturing Application Solutions Part 4: Competency Unit Assessment of Manufacturing Application Requirements 自动化系统与集成 制造应用解决方案的能力单元互操作 第4部分:制造应用需求的能力单元评估 |
China National Standards IO |
English PDF |
GB/T 22270.5-2023 |
Industrial AutomatIOn Systems and Integration Test Application Service Interfaces Part 5: Application Service Interfaces 工业自动化系统与集成 测试应用的服务接口 第5部分:应用程序服务接口 |
China National Standards IO |
English PDF |
GB/T 8586-2023 |
Operating frequency allocatIOn of fish finders and technical specifications for preventing acoustic interference 探鱼仪工作频率分配及其防止声波干扰技术规范 |
China National Standards IO |
English PDF |
GB/T 43417-2023 |
ConfiguratIOn of scoliosis orthosis for children and adolescents 儿童青少年脊柱侧弯矫形器的配置 |
China National Standards IO |
English PDF |
GB/T 43351-2023 |
Accessible design Content, graphics and expressIOn methods of touch guidance maps 无障碍设计 触摸导引地图的内容、图形和表达方法 |
China National Standards IO |
English PDF |
GB/T 43350-2023 |
Prosthetics QuantificatIOn of physical parameters of ankle-foot devices and foot components 假肢 踝足装置和足部组件物理参数的量化 |
China National Standards IO |
English PDF |
GB/Z 41082.2-2023 |
Wheelchairs Part 2: Typical values and recommended limit values of dimensIOns, mass and operating space measured according to GB/Z 18029.5 轮椅车 第2部分:按GB/Z 18029.5测得的尺寸、质量和操作空间的典型值和推荐限制值 |
China National Standards IO |
English PDF |
GB/T 20405.1-2023 |
Urine absorbent for incontinence Polyacrylate super absorbent powder Part 1: DeterminatIOn of pH value 失禁者用尿液吸收剂 聚丙烯酸酯高吸水性粉末 第1部分:pH值的测定方法 |
China National Standards IO |
English PDF |
GB/T 23538-2023 |
Ordinary abrasives - DeterminatIOn method of ball milling toughness 普通磨料 球磨韧性测定方法 |
China National Standards IO |
English PDF |
GB/T 2493-2023 |
Grinding tool rotatIOnal strength test method 磨具回转强度试验方法 |
China National Standards IO |
English PDF |
GB/T 43279.3-2023 |
Molecular in vitro diagnostic tests. SpecificatIOn of pre-test procedures for venous whole blood. Part 3: Isolation of plasma circulating cell-free DNA. 分子体外诊断检验 静脉全血检验前过程的规范 第3部分:分离血浆循环游离DNA |
China National Standards IO |
English PDF |
GB/T 43279.2-2023 |
Molecular in vitro diagnostic tests. SpecificatIOn of pre-test procedures on venous whole blood. Part 2: Isolation of genomic DNA. 分子体外诊断检验 静脉全血检验前过程的规范 第2部分:分离基因组DNA |
China National Standards IO |
English PDF |
GB/T 43279.1-2023 |
Molecular in vitro diagnostic tests. SpecificatIOn of pre-test procedures for venous whole blood. Part 1: Isolation of cellular RNA. 分子体外诊断检验 静脉全血检验前过程的规范 第1部分:分离细胞RNA |
China National Standards IO |
English PDF |
GB/T 43278-2023 |
Medical Laboratory Risk Management ApplicatIOn in Medical Laboratory 医学实验室 风险管理在医学实验室的应用 |
China National Standards IO |
English PDF |
GB/T 24168-2023 |
DeterminatIOn of phthalates in textile dyeing and finishing auxiliary products 纺织染整助剂产品中邻苯二甲酸酯的测定 |
China National Standards IO |
English PDF |
GB/T 43273-2023 |
DeterminatIOn method of freeze-thaw stability of pesticides 农药冻融稳定性测定方法 |
China National Standards IO |
English PDF |
GB/T 29381-2023 |
Tebuconazole suspensIOn 戊唑醇悬浮剂 |
China National Standards IO |
English PDF |
GB/T 23554-2023 |
Etheric solutIOn 乙烯利可溶液剂 |
China National Standards IO |
English PDF |
GB/T 4541-2023 |
Marine life-saving equipment positIOn indicator light 船用救生设备示位灯 |
China National Standards IO |
English PDF |
GB/T 43436-2023 |
Smart factory AutomatIOn system for flexible manufacturing General requirements 智能工厂 面向柔性制造的自动化系统 通用要求 |
China National Standards IO |
English PDF |
GB/T 26334-2023 |
Gas meter installatIOn accessories 燃气表安装配件 |
China National Standards IO |
English PDF |
GB/T 43432.3-2023 |
Metallic materials - Barcol hardness test Part 3: CalibratIOn of standard hardness blocks 金属材料 巴氏硬度试验 第3部分:标准硬度块的标定 |
China National Standards IO |
English PDF |
GB/T 43432.2-2023 |
Metallic materials - Barcol hardness test - Part 2: InspectIOn and calibration of hardness testers 金属材料 巴氏硬度试验 第2部分:硬度计的检验与校准 |
China National Standards IO |
English PDF |
GB/T 43407.3-2023 |
Road vehicles - Ergonomic requirements for driving areas of low-floor passenger buses running on dedicated lines - Part 3: InformatIOn devices and controls 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第3部分:信息装置和控制器 |
China National Standards IO |
English PDF |
GB/T 43407.1-2023 |
Road vehicles Ergonomic requirements for driving areas of low-floor passenger buses running on dedicated lines Part 1: General descriptIOn and basic requirements 道路车辆 低地板专线行驶客车驾驶区人体工程学要求 第1部分:总体描述和基本要求 |
China National Standards IO |
English PDF |
GB/T 43405-2023 |
Enclosed trucks - technical requirements and test methods for cargo isolatIOn devices and securing points 封闭式货车 货物隔离装置及系固点技术要求和试验方法 |
China National Standards IO |
English PDF |
GB/T 43403-2023 |
Road vehicles Trailers below 3.5t Quality inspectIOn after fatigue test of welded traction brackets for connecting balls 道路车辆 3.5t以下挂车 连接球用焊接牵引支架疲劳试验后的质量检查 |
China National Standards IO |
English PDF |
GB/T 43400-2023 |
Road vehicles Trailers below 3.5t CalculatIOn of mechanical strength of steel drawbars 道路车辆 3.5t以下挂车 钢制牵引杆机械强度计算 |
China National Standards IO |
English PDF |
GB/T 43382-2023 |
Normal directIOn of movement of hand controls on road vehicles 道路车辆手控装置常规运动方向 |
China National Standards IO |
English PDF |
GB/T 43267-2023 |
Road vehicles Expected functIOnal safety 道路车辆 预期功能安全 |
China National Standards IO |
English PDF |
GB/T 43258.4-2023 |
Road vehicles Diagnostic communicatIOns over Internet Protocol (DoIP) Part 4: Ethernet-based high-speed data link connectors 道路车辆 基于因特网协议的诊断通信 (DoIP) 第4部分: 基于以太网的高速数据链路连接器 |
China National Standards IO |
English PDF |
GB/T 43258.3-2023 |
Road vehicles Diagnostic communicatIOns over Internet Protocol (DoIP) Part 3: Wired vehicle interface based on IEEE 802.3 道路车辆 基于因特网协议的诊断通信(DoIP) 第3部分:基于IEEE 802.3有线车辆接口 |
China National Standards IO |
English PDF |
GB/T 43258.2-2023 |
Road vehicles Diagnostic communicatIOns over Internet Protocol (DoIP) Part 2: Transport protocols and network layer services 道路车辆 基于因特网协议的诊断通信(DoIP) 第2部分:传输协议与网络层服务 |
China National Standards IO |
English PDF |
GB/T 43254-2023 |
FunctIOnal safety requirements and test methods for drive motor systems for electric vehicles 电动汽车用驱动电机系统功能安全要求及试验方法 |
China National Standards IO |
English PDF |
GB/T 43253.4-2023 |
Road vehicles FunctIOnal safety audit and assessment methods Part 4: Hardware level 道路车辆 功能安全审核及评估方法 第4部分:硬件层面 |
China National Standards IO |
English PDF |
GB/T 43253.3-2023 |
Road vehicles - FunctIOnal safety audit and assessment methods Part 3: Software level 道路车辆 功能安全审核及评估方法 第3部分:软件层面 |
China National Standards IO |
English PDF |
GB/T 43253.2-2023 |
Road vehicles - FunctIOnal safety audit and assessment methods Part 2: Concept phase and system level 道路车辆 功能安全审核及评估方法 第2部分:概念阶段和系统层面 |
China National Standards IO |
English PDF |
GB/T 43253.1-2023 |
Road vehicles - FunctIOnal safety audit and assessment methods - Part 1: General requirements 道路车辆 功能安全审核及评估方法 第1部分:通用要求 |
China National Standards IO |
English PDF |
GB/T 43252-2023 |
Test method for energy consumptIOn and driving range of fuel cell electric vehicles 燃料电池电动汽车能量消耗量及续驶里程试验方法 |
China National Standards IO |
English PDF |
GB/T 43250-2023 |
Active infrared detectIOn system for automobiles 汽车用主动红外探测系统 |
China National Standards IO |
English PDF |
GB/T 43249-2023 |
Passive infrared detectIOn system for automobiles 汽车用被动红外探测系统 |
China National Standards IO |
English PDF |
GB/T 31467-2023 |
Test method for electrical performance of lithium-IOn power battery packs and systems for electric vehicles 电动汽车用锂离子动力电池包和系统电性能试验方法 |
China National Standards IO |
English PDF |
GB/T 28957.1-2023 |
Road vehicles - Test dusts for filter evaluatIOn - Part 1: Silica test dusts 道路车辆 用于滤清器评定的试验粉尘 第1部分:氧化硅试验粉尘 |
China National Standards IO |
English PDF |
GB/T 26990-2023 |
Fuel cell electric vehicle on-board hydrogen system technical conditIOns 燃料电池电动汽车 车载氢系统技术条件 |
China National Standards IO |
English PDF |
GB/T 19515-2023 |
Road vehicles reusability and recycling rates requirements and calculatIOn methods 道路车辆 可再利用率和可回收利用率 要求及计算方法 |
China National Standards IO |
English PDF |
GB/T 17867-2023 |
LocatIOn of automobile hand controls, indicators and signaling devices 汽车手操纵件、指示器及信号装置的位置 |
China National Standards IO |
English PDF |
GB/T 12538-2023 |
Road vehicles - DeterminatIOn of center of mass position 道路车辆 质心位置的测定 |
China National Standards IO |
English PDF |
GB/T 12428-2023 |
CalculatIOn method of passenger car loading mass 客车装载质量计算方法 |
China National Standards IO |
English PDF |
GB/T 23101.4-2023 |
Surgical implants Hydroxyapatite Part 4: DeterminatIOn of coating bond strength 外科植入物 羟基磷灰石 第4部分:涂层粘结强度的测定 |
China National Standards IO |
English PDF |
GB/T 23101.3-2023 |
Surgical implants Hydroxyapatite Part 3: Chemical analysis and characterizatIOn of crystallinity and phase purity 外科植入物 羟基磷灰石 第3部分:结晶度和相纯度的化学分析和表征 |
China National Standards IO |
English PDF |
GB/T 2516-2023 |
Ordinary thread limit deviatIOn 普通螺纹 极限偏差 |
China National Standards IO |
English PDF |
GB/T 43277.2-2023 |
Stop clamps and flow regulators for medical infusIOn (blood transfusion) equipment Part 2: Liquid contact scale flow regulators 医用输液(输血)器具用止流夹和流量调节器 第2部分:液体接触式刻度流量调节器 |
China National Standards IO |
English PDF |
GB/T 43277.1-2023 |
Stop clamps and flow regulators for medical infusIOn (blood transfusion) equipment Part 1: Non-liquid contact stop clamps and flow regulators 医用输液(输血)器具用止流夹和流量调节器 第1部分:非液体接触式止流夹和流量调节器 |
China National Standards IO |
English PDF |
GB/T 43349-2023 |
Calcareous materials DeterminatIOn of neutralization value Titration method 石灰质材料 中和值的测定 滴定法 |
China National Standards IO |
English PDF |
GB/T 43274-2023 |
Inorganic soil conditIOners - Determination of total calcium and magnesium content 无机土壤调理剂 总钙和镁含量的测定 |
China National Standards IO |
English PDF |
GB/T 10894-2023 |
SeparatIOn mechanical noise test method 分离机械噪声测试方法 |
China National Standards IO |
English PDF |
GB/T 28869.3-2023 |
Magnetic cores made of soft magnetic materials - Measurement methods - Part 3: Magnetic properties at high excitatIOn levels 软磁材料制成的磁心 测量方法 第3部分:高励磁水平下的磁特性 |
China National Standards IO |
English PDF |
GB/T 28869.2-2023 |
Magnetic cores made of soft magnetic materials - Methods of measurement - Part 2: Magnetic properties at low excitatIOn levels 软磁材料制成的磁心 测量方法 第2部分:低励磁水平下的磁特性 |
China National Standards IO |
English PDF |
GB/T 43259.302-2023 |
Energy Management System ApplicatIOn Programming Interface (EMS-API) Part 302: Dynamic Part of the Common Information Model (CIM) 能量管理系统应用程序接口(EMS-API)第302部分:公共信息模型(CIM)的动态部分 |
China National Standards IO |
English PDF |
GB/T 43248-2023 |
Electric and hybrid vehicles - RadIO disturbance characteristics - Limits and methods of measurement for the protection of off-board receivers below 30 MHz 电动汽车和混合动力汽车 无线电骚扰特性 用于保护30MHz以下车外接收机的限值和测量方法 |
China National Standards IO |
English PDF |
GB/T 43346-2023 |
Technical conditIOns for starting and stopping the use of lead-acid batteries 起停用铅酸蓄电池 技术条件 |
China National Standards IO |
English PDF |
GB/T 5008.3-2023 |
Lead-acid batteries for starters Part 3: Product varieties, specificatIOns and terminal dimensions for heavy-duty vehicles 起动用铅酸蓄电池 第3部分:重载车辆产品品种规格和端子尺寸 |
China National Standards IO |
English PDF |
GB/T 5008.2-2023 |
Lead-acid batteries for starting use Part 2: Product variety specificatIOns and terminal dimensions and markings 起动用铅酸蓄电池 第2部分:产品品种规格和端子尺寸、标记 |
China National Standards IO |
English PDF |
GB/T 5008.1-2023 |
Lead-acid batteries for starting use Part 1: Technical conditIOns and test methods 起动用铅酸蓄电池 第1部分:技术条件和试验方法 |
China National Standards IO |
English PDF |
GB/T 14713-2023 |
General technical conditIOns for rotary cutting machines 旋切机通用技术条件 |
China National Standards IO |
English PDF |
GB/T 43098.2-2023 |
Analysis methods for water treatment agents Part 2: DeterminatIOn of arsenic, mercury, cadmium, chromium, lead, nickel and copper content Inductively coupled plasma mass spectrometry (ICP-MS) 水处理剂分析方法 第2部分:砷、汞、镉、铬、铅、镍、铜含量的测定 电感耦合等离子体质谱法(ICP-MS) |
China National Standards IO |
English PDF |
GB/T 23948-2023 |
Inorganic chemical products - general method for determinatIOn of water-insoluble matter 无机化工产品 水不溶物测定通用方法 |
China National Standards IO |
English PDF |
GB/T 23947.3-2023 |
General method for determinatIOn of arsenic in inorganic chemical products Part 3: Atomic fluorescence spectrometry 无机化工产品中砷测定的通用方法 第3部分:原子荧光光谱法 |
China National Standards IO |
English PDF |
GB/T 17530.2-2023 |
Test methods for industrial acrylic acid and esters Part 2: DeterminatIOn of organic impurities and purity of industrial acrylic acid esters Gas chromatography 工业丙烯酸及酯的试验方法 第2部分:工业用丙烯酸酯有机杂质及纯度的测定 气相色谱法 |
China National Standards IO |
English PDF |
GB/T 3394-2023 |
DeterminatIOn of trace amounts of carbon monoxide, carbon dioxide and acetylene in ethylene and propylene for industrial use - Gas chromatography 工业用乙烯、丙烯中微量一氧化碳、二氧化碳和乙炔的测定 气相色谱法 |
China National Standards IO |
English PDF |
GB/T 3392-2023 |
DeterminatIOn of hydrocarbon impurities in propylene for industrial use - Gas chromatography 工业用丙烯中烃类杂质的测定 气相色谱法 |
China National Standards IO |
English PDF |
GB/T 43326.4-2023 |
Snow blowers - Safety requirements and test methods - Part 4: AdditIOnal national and regional requirements 抛雪机 安全要求和试验方法 第4部分:国家和地区的附加要求 |
China National Standards IO |
English PDF |
GB/T 30553-2023 |
High voltage direct current transmissIOn based on voltage source converter 基于电压源换流器的高压直流输电 |
China National Standards IO |
English PDF |
GB/T 43257.6-2023 |
Safety test methods for radIOactive material transport containers Part 6: Heat resistance test 放射性物品运输容器安全试验方法 第6部分:耐热试验 |
China National Standards IO |
English PDF |
GB/T 43257.1-2023 |
Safety test methods for radIOactive material transport containers Part 1: General principles 放射性物品运输容器安全试验方法 第1部分:总则 |
China National Standards IO |
English PDF |
GB/T 4960.2-2023 |
Terminology of Nuclear Science and Technology Part 2: FissIOn Reactor 核科学技术术语 第2部分:裂变反应堆 |
China National Standards IO |
English PDF |
GB/T 43412-2023 |
Recommended process specificatIOns for resistance spot welding of metal sheets 金属薄板电阻点焊推荐工艺规范 |
China National Standards IO |
English PDF |
GB/T 43321-2023 |
Recommended process specificatIOns for brazing copper and copper alloys 铜及铜合金钎焊推荐工艺规范 |
China National Standards IO |
English PDF |
GB/T 43320-2023 |
Non-destructive testing of welds, ultrasonic testing, applicatIOn of automatic phased array technology for thin-walled steel components 焊缝无损检测 超声检测 薄壁钢构件自动相控阵技术的应用 |
China National Standards IO |
English PDF |
GB/T 25774.3-2023 |
InspectIOn of welding materials Part 3: Preparation and inspection of T-joint fillet weld specimens 焊接材料的检验 第3部分:T型接头角焊缝试样的制备及检验 |
China National Standards IO |
English PDF |
GB/T 25774.2-2023 |
InspectIOn of welding materials Part 2: Preparation of mechanical properties specimens for single-sided single-pass welding and double-sided single-pass welded joints of steel 焊接材料的检验 第2部分:钢的单面单道焊和双面单道焊焊接接头力学性能试样的制备 |
China National Standards IO |
English PDF |