GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 3676-2008 |
Maleic anhydride for industrial use 工业用顺丁烯二酸酐 |
China National Standards M |
English PDF |
GB/T 3181-2008 |
Colour standard for paint filM 漆膜颜色标准 |
China National Standards M |
English PDF |
GB/T 2977-2008 |
Size designation,diMensions,inflation pressure and load capacity for truck tyres 载重汽车轮胎规格、尺寸、气压与负荷 |
China National Standards M |
English PDF |
GB/T 21993-2008 |
Polyvinyl chloride resins - DeterMination of the content of methanol or ethanol extract 聚氯乙烯树脂 甲醇或乙醇萃取物含量的测定 |
China National Standards M |
English PDF |
GB/T 21992-2008 |
Polyvinyl chloride resins for Paste - DeterMination of number of impurities particles and foreign particles 糊用聚氯乙烯树脂 杂质与外来粒子数的测定 |
China National Standards M |
English PDF |
GB/T 21991-2008 |
Plastics - Preparation of PVC paste for test purpose - Planetary-Mixer method 塑料 试验用聚氯乙烯(PVC)糊的制备 行星混合器法 |
China National Standards M |
English PDF |
GB/T 21990-2008 |
Polyvinyl chloride (PVC) pastes - DeterMination of fineness of grind 聚氯乙烯(PVC)糊 刮板细度的测定 |
China National Standards M |
English PDF |
GB/T 21989-2008 |
Plastics - Poly(vinyl chloride)pastes - DeterMination of apparent viscosity using the severs rheometer 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度 |
China National Standards M |
English PDF |
GB/T 21988-2008 |
Plastics-Vinyl chloride hoMopolymer and copolymer resins-Sieve analysis in water 塑料 氯乙烯均聚和共聚树脂 水中筛分析 |
China National Standards M |
English PDF |
GB/T 21910-2008 |
Method for measuring relative wet grip performance of passenger car tyres 轿车轮胎湿路面相对抓着性能试验方法 |
China National Standards M |
English PDF |
GB/T 1863-2008 |
Iron oxide pigMents 氧化铁颜料 |
China National Standards M |
English PDF |
GB/T 1766-2008 |
Paints and varnishes - Rating scheMes of degradation of coats 色漆和清漆 涂层老化的评级方法 |
China National Standards M |
English PDF |
GB/T 17410-2008 |
Organic heat transfer Material heaters 有机热载体炉 |
China National Standards M |
English PDF |
GB/T 1721-2008 |
DeterMination of appearance and transparency of varnishes, boiled oils and thinners 清漆、清油及稀释剂外观和透明度测定法 |
China National Standards M |
English PDF |
GB/T 1713-2008 |
DeterMination of density of pigments - Pyknometer method 颜料密度的测定 比重瓶法 |
China National Standards M |
English PDF |
GB/T 1668-2008 |
Plasticizers - DeterMination of acid value and acidity 增塑剂酸值及酸度的测定 |
China National Standards M |
English PDF |
GB/T 16613-2008 |
Plastics - Preparation of PVC pastes for test purposes - Dissolver Method 塑料 试验用聚氯乙烯(PVC)糊的制备 分散器法 |
China National Standards M |
English PDF |
GB/T 1688-2008 |
Rubber,vulcanized - DeterMination of tension fatigue 硫化橡胶 伸张疲劳的测定 |
China National Standards M |
English PDF |
GB/T 15337-2008 |
General rules for atoMic absorption spectrometric analysis 原子吸收光谱分析法通则 |
China National Standards M |
English PDF |
GB/T 14832-2008 |
Test Methods for compatibility between hydraulic fluids and standard elastomeric materials 标准弹性体材料与液压液体的相容性试验 |
China National Standards M |
English PDF |
GB/T 13893-2008 |
Paints and varnishes - DeterMination of resistnace to humidity - Continuous condensation 色漆和清漆 耐湿性的测定 连续冷凝法 |
China National Standards M |
English PDF |
GB/T 13254-2008 |
CaprolactaM for industrial use 工业用己内酰胺 |
China National Standards M |
English PDF |
GB/T 13248-2008 |
Rubber and rubber latices - DeterMination of manganese content - Sodium periodate photometric methodes 橡胶和胶乳 锰含量的测定 高碘酸钠光度法 |
China National Standards M |
English PDF |
GB/T 12830-2008 |
Rubber,vulcanized or therMoplastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法 |
China National Standards M |
English PDF |
GB/T 11501-2008 |
Photography - Density Measurement - Part 3:Spectral Conditions 摄影 密度测量 第3部分:光谱条件 |
China National Standards M |
English PDF |
GB/T 10707-2008 |
Rubber - DeterMination of the burning 橡胶燃烧性能的测定 |
China National Standards M |
English PDF |
GB/T 10666-2008 |
CalciuM hypochlorite 次氯酸钙(漂粉精) |
China National Standards M |
English PDF |
GB/T 970.1-2008 |
Circular screwing dies - Part 1: The types and diMensions for circular screwing dies and die stocks 圆板牙 第1部分:圆板牙和圆板牙架的型式和尺寸 |
China National Standards M |
English PDF |
GB/T 9487-2008 |
Diesel engines - Exhaust gas Measurement under free acceleration 柴油机自由加速排气烟度的测量方法 |
China National Standards M |
English PDF |
GB/T 9258.2-2008 |
Coated abrasives - Grain size analysis - Part 2: DeterMination of grain size distribution of macrogrits P12 to P220 涂附磨具用磨料 粒度分析 第2部分:粗磨粒P12~P220粒度组成的测定 |
China National Standards M |
English PDF |
GB/T 8498-2008 |
Earth-Moving machinery - Basic type - Identification and terms and definitions 土方机械 基本类型 识别、术语和定义 |
China National Standards M |
English PDF |
GB/T 7682-2008 |
Milk separator 牛奶分离机 |
China National Standards M |
English PDF |
GB/T 725-2008 |
Internal coMbustion engines - Nomenclature and code of designations 内燃机产品名称和型号编制规则 |
China National Standards M |
English PDF |
GB/T 7121.1-2008 |
The strength testing Method and accepting conditions of the rear-mounted protective structures on wheeled agricultural and forestry tractors - Part 1: Static testing method of rear mounted ROPS 农林轮式拖拉机防护装置强度试验方法和验收条件 第1部分:后置式静态试验方法 |
China National Standards M |
English PDF |
GB/T 5862-2008 |
Agricultural tractors and Machinery - General purpose quick-action hydraulic couplers 农业拖拉机和机具 通用液压快换接头 |
China National Standards M |
English PDF |
GB/T 5667-2008 |
Productive testing Methods for agricultural machinery 农业机械 生产试验方法 |
China National Standards M |
English PDF |
GB/T 5262-2008 |
Agricultural Machinery testing conditions-general rules for measuring methods 农业机械 试验条件测定方法的一般规定 |
China National Standards M |
English PDF |
GB/T 4346-2008 |
Machine tools - Manually operated self-centring chucks 机床 手动自定心卡盘 |
China National Standards M |
English PDF |
GB/T 4127.7-2008 |
Bonded abrasive products - DiMensions - Part 7: Grinding wheels for manually guided grinding 固结磨具 尺寸 第7部分:人工操纵磨削砂轮 |
China National Standards M |
English PDF |
GB/T 4127.6-2008 |
Bonded abrasive products - DiMensions - Part 6: Grinding wheels for tool and tool room grinding 固结磨具 尺寸 第6部分:工具磨和工具室用砂轮 |
China National Standards M |
English PDF |
GB/T 4127.5-2008 |
Bonded abrasive products - DiMensions - Part 5: Grinding wheels for surface grinding/face grinding 固结磨具 尺寸 第5部分:平面磨削用端面磨砂轮 |
China National Standards M |
English PDF |
GB/T 4127.4-2008 |
Bonded abrasive products - DiMensions - Part 4: Grinding wheels for suface grinding/peripheral grinding 固结磨具 尺寸 第4部分:平面磨削用周边磨砂轮 |
China National Standards M |
English PDF |
GB/T 4127.14-2008 |
Bonded abrasive products - DiMensions - Part 14: Grinding wheels for deburring and fettling/snagging on an angle grinder 固结磨具 尺寸 第14部分:角向砂轮机用去毛刺、荒磨和粗磨砂轮 |
China National Standards M |
English PDF |
GB/T 4127.13-2008 |
Bonded abrasive products - DiMensions - Part 13: Grinding wheels for deburring and fettling on a vertical grinder 固结磨具 尺寸 第13部分:立式砂轮机用去毛刺和荒磨砂轮 |
China National Standards M |
English PDF |
GB/T 4127.12-2008 |
Bonded abrasive products - DiMensions - Part 12: Grinding wheels for deburring and fettling on a straight grinder 固结磨具 尺寸 第12部分:直向砂轮机用去毛刺和荒磨砂轮 |
China National Standards M |
English PDF |
GB/T 4127.11-2008 |
Bonded abrasive products - DiMensions - Part 11:Hand finishing sticks 固结磨具 尺寸 第11部分:手持抛光磨石 |
China National Standards M |
English PDF |
GB/T 4127.10-2008 |
Bonded abrasive products - DiMensions - Part 10: Stones for honing and superfinishings 固结磨具 尺寸 第10部分:珩磨和超精磨磨石 |
China National Standards M |
English PDF |
GB/T 3506-2008 |
Machine taps with helical flutes 螺旋槽丝锥 |
China National Standards M |
English PDF |
GB/T 2554-2008 |
Mechanical dividing heads 机械分度头 |
China National Standards M |
English PDF |
GB/T 2479-2008 |
Conventional abrasive - White fused aluMina 普通磨料 白刚玉 |
China National Standards M |
English PDF |
GB/T 2478-2008 |
Conventional abrasive - Brown fused aluMina 普通磨料 棕刚玉 |
China National Standards M |
English PDF |
GB/T 21960-2008 |
The testing Method and accepting condition of the driver’s seat on agricultural and forestry tractors 农林拖拉机驾驶座试验方法和验收条件 |
China National Standards M |
English PDF |
GB/T 21959-2008 |
Tractor-trailer coMbination - Specifications 拖拉机运输机组 技术条件 |
China National Standards M |
English PDF |
GB/T 21957-2008 |
The fatigue-life testing Method of the axle shaft and drive shaft on the test stand,wheeled agricultural tractor 农业轮式拖拉机半轴和驱动轴 台架疲劳寿命试验方法 |
China National Standards M |
English PDF |
GB/T 21956.3-2008 |
The strength testing Method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 3:Static testing method of rear mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第3部分:后置式静态试验方法 |
China National Standards M |
English PDF |
GB/T 21956.2-2008 |
The strength testing Method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 2:Dynamic testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第2部分:前置式动态试验方法 |
China National Standards M |
English PDF |
GB/T 21956.1-2008 |
The strength testing Method and accepting condition of protective structures on narrow-track wheeled agricultural and forestry tractors - Part 1:Static testing method of front mounted ROPS 农林窄轮距轮式拖拉机防护装置强度试验方法和验收条件 第1部分:前置式静态试验方法 |
China National Standards M |
English PDF |
GB/T 21955-2008 |
Tractors and Machinery for agriculture and forestry - Paper friction disc - Technical specifications 农林拖拉机和机械 纸基摩擦片 技术条件 |
China National Standards M |
English PDF |
GB/T 21954.2-2008 |
Metal cutting band saw blades - Part 2:Characteristics and dimensions 金属切割带锯条 第2部分:特性和尺寸 |
China National Standards M |
English PDF |
GB/T 21954.1-2008 |
Metal cutting band saw blades - Part 1:Terms 金属切割带锯条 第1部分:术语 |
China National Standards M |
English PDF |
GB/T 21952-2008 |
Polycrystalline diaMond inserts,tipped - Dimensions 镶聚晶金刚石刀片 尺寸 |
China National Standards M |
English PDF |
GB/T 21951-2008 |
Cubic boron nitride inserts,tipped or solid - DiMensions 镶或整体立方氮化硼刀片 尺寸 |
China National Standards M |
English PDF |
GB/T 21949.2-2008 |
CNC universal tool Milling machines - Part 2: Specifications 数控万能工具铣床 第2部分:技术条件 |
China National Standards M |
English PDF |
GB/T 21949.1-2008 |
CNC universal tool Milling machines - Part 1: Testing of the accuracy 数控万能工具铣床 第1部分:精度检验 |
China National Standards M |
English PDF |
GB/T 21948.2-2008 |
Test conditions for CNC Milling machines with table of variable height - Testing of accuracy - Part 2: Machines with vertical spindle 数控升降台铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards M |
English PDF |
GB/T 21948.1-2008 |
Test conditions for CNC Milling machines with table of variable height - Testing of accuracy - Part 1: Machines with horizontal spindle 数控升降台铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards M |
English PDF |
GB/T 21947-2008 |
NuMerically milling machines for special screws - Testing of the accuracy 数控异型螺杆铣床 精度检验 |
China National Standards M |
English PDF |
GB/T 21946-2008 |
NuMerical control gear shaving machines - Testing of the accuracy 数控剃齿机 精度检验 |
China National Standards M |
English PDF |
GB/T 21945-2008 |
NuMerical control sector gear shaping machines - Testing of the accuracy 数控扇形齿轮插齿机 精度检验 |
China National Standards M |
English PDF |
GB/T 21944.1-2008 |
Special products of silicon carbide - Kiln furniture of reaction bonded silicon carbide - Part 1:BeaM 碳化硅特种制品 反应烧结碳化硅窑具 第1部分:方梁 |
China National Standards M |
English PDF |
GB/T 21942-2008 |
Earth-Moving machinery - Loader and front loading excavator buckets - Volumetric ratings 土方机械 装载机和正铲挖掘机的铲斗 容量标定 |
China National Standards M |
English PDF |
GB/T 21941-2008 |
Earth-Moving machinery - Volumetric ratings for hoe-type and grab-type buckets of hydraulic excavators and backhoe loaders 土方机械 液压挖掘机和挖掘装载机的反铲斗和抓铲斗 容量标定 |
China National Standards M |
English PDF |
GB/T 21940-2008 |
Earth-Moving machinery - Cutting edges used on tractor-dozers, graders and scrapers - Principal shapes and basic dimensions 土方机械 推土机、平地机和铲运机用刀片 主要形状和基本尺寸 |
China National Standards M |
English PDF |
GB/T 21939-2008 |
Earth-Moving machinery - Warning devices for slow-moving machines - Ultrasonic and other systems 土方机械 低速机器报警装置 超声波及其它系统 |
China National Standards M |
English PDF |
GB/T 21938-2008 |
Earth-Moving machinery - Hydraulic excavator and backhoe loader boom-lowering control device - Requirements and tests 土方机械 液压挖掘机和挖掘装载机动臂下降控制装置 要求和试验 |
China National Standards M |
English PDF |
GB/T 21937-2008 |
Earth-Moving machinery - Crawler and wheel tractor dozer blades - Volumetric ratings 土方机械 履带式和轮胎式推土机的推土铲 容量标定 |
China National Standards M |
English PDF |
GB/T 21936-2008 |
Earth-Moving machinery - Machine-mounted retrieval device - Performance requirements 土方机械 安装在机器上的拖拽装置 性能要求 |
China National Standards M |
English PDF |
GB/T 21935-2008 |
Earth-Moving machinery - Zones of comfort and reach for controls 土方机械 操纵的舒适区域与可及范围 |
China National Standards M |
English PDF |
GB/T 21934-2008 |
Earth-Moving machinery - Plough bolt 土方机械 沉头方颈螺栓 |
China National Standards M |
English PDF |
GB/T 21899-2008 |
Mowing and flattening machine 割草压扁机 |
China National Standards M |
English PDF |
GB/T 19073-2008 |
Gearbox of wind turbine generator systeMs 风力发电机组 齿轮箱 |
China National Standards M |
English PDF |
GB/T 17587.5-2008 |
Ball screws - Part 5: Static and dynaMic load ratings and operational life 滚珠丝杠副 第5部分:轴向额定静载荷和动载荷及使用寿命 |
China National Standards M |
English PDF |
GB/T 16770.2-2008 |
Solid hardMetal end mills with parallel shank - Part 2: Technical specifications 整体硬质合金直柄立铣刀 第2部分:技术条件 |
China National Standards M |
English PDF |
GB/T 16770.1-2008 |
Solid hardMetal end mills with parallel shank - Part 1: Dimensions 整体硬质合金直柄立铣刀 第1部分:型式与尺寸 |
China National Standards M |
English PDF |
GB/T 16456.4-2008 |
End Mills with brazed helical hardmetal tips - Part 4:Technical specifications 硬质合金螺旋齿立铣刀 第4部分:技术条件 |
China National Standards M |
English PDF |
GB/T 16456.3-2008 |
End Mills with brazed helical hardmetal tips - Part 3: Dimensions of end mills with morse typer shank 硬质合金螺旋齿立铣刀 第3部分:莫氏锥柄立铣刀 型式和尺寸 |
China National Standards M |
English PDF |
GB/T 16456.2-2008 |
End Mills with brazed helical tips - Part 2: Dimensions of end mills with 7:24 taper shank 硬质合金螺旋齿立铣刀 第2部分:7:24 锥柄立铣刀 型式和尺寸 |
China National Standards M |
English PDF |
GB/T 16456.1-2008 |
End Mills with brazed helical hardmetal tips - Part l: Dimensions of end mills with parallel shank 硬质合金螺旋齿立铣刀 第1部分:直柄立铣刀 型式和尺寸 |
China National Standards M |
English PDF |
GB/T 15371-2008 |
Torsional vibration of crankshaft systeM - Measurement and evaluation method 曲轴轴系扭转振动的测量与评定方法 |
China National Standards M |
English PDF |
GB/T 15306.4-2008 |
Indexable inserts for cutting tools - CeraMic inserts with rounded corners - Part 4:Specifications 陶瓷可转位刀片 第4部分:技术条件 |
China National Standards M |
English PDF |
GB/T 15306.3-2008 |
Indexable inserts for cutting tools - CeraMic inserts with rounded corners - Part 3: Dimensions of inserts without fixing hole(Class U) 陶瓷可转位刀片 第3部分:无孔刀片尺寸(U级) |
China National Standards M |
English PDF |
GB/T 15306.2-2008 |
Indexable inserts for cutting tools - CeraMic inserts with rounded corners - Part 2: Dimensions of inserts with cylindrical fixing hole 陶瓷可转位刀片 第2部分:带孔刀片尺寸 |
China National Standards M |
English PDF |
GB/T 15306.1-2008 |
Indexable inserts for cutting tools - CeraMic inserts with rounded corners - Part 1: Dimensions of inserts without fixing hole(Class G) 陶瓷可转位刀片 第1部分:无孔刀片尺寸(G级) |
China National Standards M |
English PDF |
GB/T 14917-2008 |
Earth-Moving machinery - Service instrumentation 土方机械 维修服务用仪器 |
China National Standards M |
English PDF |
GB/T 14328-2008 |
Roughing end Mill 粗加工立铣刀 |
China National Standards M |
English PDF |
GB/T 14321-2008 |
Testing Method for quantities of α-Al2O3 phase in alumina with an X-ray diffractometer 刚玉磨料中α-Al2O3相X射线定量测定方法 |
China National Standards M |
English PDF |
GB/T 14298-2008 |
Helical end Mills with indexable inserts 可转位螺旋立铣刀 |
China National Standards M |
English PDF |
GB/T 10938-2008 |
Rotary Mowers 旋转割草机 |
China National Standards M |
English PDF |
GB/T 10604-2008 |
Mechanical mining shovel 矿用机械正铲式挖掘机 |
China National Standards M |
English PDF |
GB/T 14225-2008 |
Mouldboard plough 铧式犁 |
China National Standards M |
English PDF |
Find out:46298Items | To Page of: First -Previous-Next -Last | [343] [344] [345] [346] [347] [348] [349] |