Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 6569-2006 |
Fine ceraMics (advanced ceramics, advanced technical ceramics) - Test method for flexural strength of monolithic ceramics at room temperature 精细陶瓷弯曲强度试验方法 |
China National Standards Mi |
 English PDF |
| GB/T 20117-2006 |
Fine ceraMics (advanced ceramics, advanced technical ceramics) - Sample preparation for the determination of particle size distribution of ceramic powders 精细陶瓷粉体颗粒尺寸分布测试用样品的制备 |
China National Standards Mi |
English PDF |
| GB/T 10700-2006 |
Test methods for elastic moduli of fine ceraMics (advanced ceramics, advanced technical ceramics) - Bending method 精细陶瓷弹性模量试验方法 弯曲法 |
China National Standards Mi |
English PDF |
| GB/T 20110-2006 |
Hydraulic fluid power - Cleanliness of parts and components - Inspection document and principles related to contaMinant collection,analysis and data reporting 液压传动 零件和元件的清洁度 与污染物的收集、分析和数据报告相关的检验文件和准则 |
China National Standards Mi |
English PDF |
| GB/T 20109-2006 |
Fresh air dehuMidifiers 全新风除湿机 |
China National Standards Mi |
English PDF |
| GB/T 20107-2006 |
Absorption water chiller(heater) for villa and siMilar application 户用及类似用途的吸收式冷（热）水机 |
China National Standards Mi |
English PDF |
| GB/T 15335-2006 |
DeterMination of leakage rate and specific resistance for air duct 风筒漏风率和风阻的测定方法 |
China National Standards Mi |
English PDF |
| GB/T 1409-2006 |
Recommended methods for the deterMination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including meter wavelengths 测量电气绝缘材料在工频、音频、高频(包括米波波长在内)下电容率和介质损耗因数的推荐方法 |
China National Standards Mi |
English PDF |
| GB/T 10064-2006 |
Methods of test for the deterMination of the insulation resistance of solid insulating materials 测定固体绝缘材料绝缘电阻的试验方法 |
China National Standards Mi |
English PDF |
| GB 13078.1-2006 |
Hygienical standard for feed - LiMited content of nitrite in feeds 饲料卫生标准 饲料中亚硝酸盐允许量 |
China National Standards Mi |
English PDF |
| GB/T 3871.6-2006 |
Agricultural tractors - Test procedures - Part 6: DeterMination of braking performance 农业拖拉机 试验规程 第6部分：农林车辆制动性能的确定 |
China National Standards Mi |
English PDF |
| GB/T 3871.16-2006 |
Agricultural tractors - Test procedures - Part 16: Axle power deterMination 农业拖拉机 试验规程 第16部分：轴功率测定 |
China National Standards Mi |
English PDF |
| GB/T 3871.14-2006 |
Agricultural tractors - Test procedures - Part 14: Partial power PTO - Non-mechanically transMitted power 农业拖拉机 试验规程 第14部分：非机械式传输的部分功率输出动力输出轴 |
China National Standards Mi |
English PDF |
| GB/T 3810.9-2006 |
Test methods of ceraMic tiles Part 9: Determination of resistance to thermal shock 陶瓷砖试验方法 第9部分:抗热震性的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.8-2006 |
Test methods of ceraMic tiles Part 8: Determination of linear thermal expansion 陶瓷砖试验方法 第8部分:线性热膨胀的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.7-2006 |
Test methods of ceraMic tiles Part 7: Determination of resistance to surface abrasion for glazed tiles 陶瓷砖试验方法 第7部分:有釉砖表面耐磨性的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.6-2006 |
Test methods of ceraMic tiles Part 6: Determination of resistance to deep abrasion for unglazed tiles 陶瓷砖试验方法 第6部分:无釉砖耐磨深度的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.5-2006 |
Test methods of ceraMic tiles Part 5: Determination of impact resistance by measurement of coefficient of restitution 陶瓷砖试验方法 第5部分:用恢复系数确定砖的抗冲击性 |
China National Standards Mi |
English PDF |
| GB/T 3810.4-2006 |
Test methods of ceraMic tiles Part 4: Determination of modulus of rupture and breaking strength 陶瓷砖试验方法 第4部分:断裂模数和破坏强度的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.3-2006 |
Test method of ceraMic tiles Part 3: Determination of water absorption, apparent porosity, apparent relative density and bulk density 陶瓷砖试验方法 第3部分:吸水率、显气孔率、表观相对密度和容重的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.2-2006 |
Test methods of ceraMic tiles Part 2: Determination of dimensions and surface quality 陶瓷砖试验方法 第2部分:尺寸和表面质量的检验 |
China National Standards Mi |
English PDF |
| GB/T 3810.16-2006 |
Test methods of ceraMic tiles Part 16: Determination of small colour differences 陶瓷砖试验方法 第16部分:小色差的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.15-2006 |
Test methods of ceraMic tiles Part 15: Determination of lead and cadmium given off by glazed tiles 陶瓷砖试验方法 第15部分:有釉砖铅和镉溶出量的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.14-2006 |
Test methods of ceraMic tiles Part 14: Determination of resistance to stains 陶瓷砖试验方法 第14部分:耐污染性的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.13-2006 |
Test methods of ceraMic tiles Part 13: Determination of chemical resistance 陶瓷砖试验方法 第13部分:耐化学腐蚀性的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.12-2006 |
Test methods of ceraMic tiles Part 12: Determination of frost resistance 陶瓷砖试验方法 第12部分:抗冻性的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.1-2006 |
Test methods of ceraMic tiles Part 1: Sampling and basis for acceptance 陶瓷砖试验方法 第1部分:抽样和接收条件 |
China National Standards Mi |
English PDF |
| GB/T 3810.11-2006 |
Test methods of ceraMic tiles Part 11: Determination of crazing resistance for glazed tiles 陶瓷砖试验方法 第11部分:有釉砖抗釉裂性的测定 |
China National Standards Mi |
English PDF |
| GB/T 3810.10-2006 |
Test methods of ceraMic tiles Part 10: Determination of moisture expansion 陶瓷砖试验方法 第10部分:湿膨胀的测定 |
China National Standards Mi |
English PDF |
| GB/T 20102-2006 |
Test method for deterMining tensile breaking strength of glass fiber reinforcing mesh, after exposure to a sodium hydroxide sulution 玻璃纤维网布耐碱性试验方法 氢氧化钠溶液浸泡法 |
China National Standards Mi |
English PDF |
| GB 14892-2006 |
Noise liMit and measurement for train of urban rail transit 城市轨道交通列车噪声限值和测量方法 |
China National Standards Mi |
English PDF |
| GB/T 8845-2006 |
TerMinology of stamping dies 冲模术语 |
China National Standards Mi |
English PDF |
| GB/T 20063.12-2006 |
Graphical symbols for diagrams -Part 12: Devices for separating purification and Mixing 简图用图形符号 第12部分：分离、净化和混合的装置 |
China National Standards Mi |
English PDF |
| GB/T 6060.2-2006 |
Roughness comparison specimens - Ground, turned, bored, Milled, shaped and planed 表面粗糙度比较样块 磨、车、镗、铣、插及刨加工表面 |
China National Standards Mi |
English PDF |
| GB/T 222-2006 |
PerMissible tolerances for chemical composition of steel products 钢的成品化学成分允许偏差 |
China National Standards Mi |
English PDF |
| GB/T 20066-2006 |
Steel and iron -- Sampling and preparation of samples for the deterMination of chemical composition 钢和铁 化学成分测定用试样的取样和制样方法 |
China National Standards Mi |
English PDF |
| GB/T 1957-2006 |
Tolerances and general features for plain liMin gauges 光滑极限量规 技术条件 |
China National Standards Mi |
English PDF |
| GB/T 14291-2006 |
Welded steel tubes for Mine liquid service 矿山流体输送用电焊钢管 |
China National Standards Mi |
English PDF |
| GB 20048-2006 |
Criteria for eliMination of filariasis 丝虫病消除标准 |
China National Standards Mi |
English PDF |
| GB/T 5289.3-2006 |
Test conditions for boring and Milling machines with horizontal spindle - Testing of the accuracy - Part 3: Floor type machines with detached, stationary work-holding table 卧式铣镗床检验条件 精度检验 第3部分:带分离式工件夹持固定工作台的落地式机床 |
China National Standards Mi |
English PDF |
| GB/T 3932.2-2006 |
Test conditions for manually controlled Milling machines with table of fixed height - Testing of the accuracy - Part 2: Machines with vertical spindle 床身铣床检验条件 精度检验 第2部分:立式铣床 |
China National Standards Mi |
English PDF |
| GB/T 3932.1-2006 |
Test conditions for manually controlled Milling machines with table of fixed height - Testing of the accuracy - Part 1: Machines with horizontal spindle 床身铣床检验条件 精度检验 第1部分:卧式铣床 |
China National Standards Mi |
English PDF |
| GB 20062-2006 |
Mobile crawler crane LiMits and measurement methods for operating noise 流动式起重机作业噪声限值及测量方法 |
China National Standards Mi |
English PDF |
| GB/T 9722-2006 |
CheMical reagent―General rules for the gas chromatography 化学试剂 气相色谱法通则 |
China National Standards Mi |
English PDF |
| GB/T 9045-2006 |
Photography―Photographic materials―DeterMination of ISO resolving power 摄影 照相材料 ISO分辨力的测定 |
China National Standards Mi |
English PDF |
| GB/T 6692-2006 |
Resin finishing agent―DeterMination of relative density 树脂整理剂 相对密度的测定 |
China National Standards Mi |
English PDF |
| GB/T 5543-2006 |
Resin finishing agent―DeterMination total formaldehyde content、free formaldehyde content and methylol formadehyde contend 树脂整理剂 总甲醛含量、游离甲醛含量和羟甲基甲醛含量的测定 |
China National Standards Mi |
English PDF |
| GB/T 7375-2006 |
Fluorinated methanes for industrial uses―DeterMination of purity―Gas chromatography 工业用氟代甲烷类纯度的测定 气相色谱法 |
China National Standards Mi |
English PDF |
| GB/T 20436-2006 |
Dimethylsiloxane cyclics Mixture 二甲基硅氧烷混合环体 |
China National Standards Mi |
English PDF |
| GB/T 20433-2006 |
Photography―Processing cheMicals―Specifications for ammonium thiosulfate solution 摄影 加工用化学品 硫代硫酸铵溶液规格 |
China National Standards Mi |
English PDF |
| GB/T 20432.4-2006 |
Photography―Photographic-grade cheMicals―Test methods―Part 4: Determination of residue after ignition 摄影 照相级化学品 试验方法 第4部分: 灼烧残渣的测定 |
China National Standards Mi |
English PDF |
| GB/T 20432.1-2006 |
Photography―Photographic-grade cheMicals―Test methods―Part 1: General 摄影 照相级化学品 试验方法 第1部分: 总则 |
China National Standards Mi |
English PDF |
| GB/T 20417.2-2006 |
Plastics―Acrylonitrile-butadiene-styrene(ABS)moulding and extrusion materials―Part 2: Preparation of test specimens and deterMination of properties 塑料 丙烯腈-丁二烯-苯乙烯 (ABS) 模塑和挤出材料 第2部分:试样制备和性能测定 |
China National Standards Mi |
English PDF |
| GB/T 1845.2-2006 |
Plastics―Polyethylene(PE) moulding and extrusion materials―Part 2: Preparation of test specimens and deterMination of properties 塑料 聚乙烯 (PE) 模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Mi |
English PDF |
| GB/T 4510-2006 |
Test method for deterMination of breaking point of bitumen (Fraass method) 石油沥青脆点测定法#弗拉斯法 |
China National Standards Mi |
English PDF |
| GB/T 3535-2006 |
Petroleum products - DeterMination of pour point 石油产品倾点测定法 |
China National Standards Mi |
English PDF |
| GB/T 20082-2006 |
Hydraulic fluid power -- Fluid contaMination -- Determination of particulate contamination by the counting method using an optical microscope 液压传动 液体污染 采用光学显微镜测定颗粒污染度的方法 |
China National Standards Mi |
English PDF |
| GB/T 20081.2-2006 |
Pneumatic fluid power -- Compressed air pressure regulators and filter-regulators -- Part 2: Test methods to deterMine the main characteristics to be included in literature from suppliers 气动减压阀和过滤减压阀 第2部分:评定商务文件中应包含的主要特性的测试方法 |
China National Standards Mi |
English PDF |
| GB/T 20061-2006 |
Test method and judgment of anti-deflagration property of perMissible explosive 煤矿许用炸药抗爆燃性能测试方法及判定 |
China National Standards Mi |
English PDF |
| GB/T 8929-2006 |
Crude petroleum - DeterMination of water - Distillation method 原油水含量的测定 蒸馏法 |
China National Standards Mi |
English PDF |
| GB/T 3450-2006 |
Noise liMit and measurement inside driver’s cabs of railway locomotive and powered car train-sets 铁道机车和动车组司机室噪声限值及测量方法 |
China National Standards Mi |
English PDF |
| GB/T 17286.4-2006 |
Liquid hydrocarbons - DynaMic measurement - Proving systems for volumetric meters - Part 4: Guide for operators of pipe provers 液态烃动态测量 体积计量流量计检定系统 第4部分：体积管操作人员指南 |
China National Standards Mi |
English PDF |
| GB/T 4607-2006 |
Road vehicles - 90 seMi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions 道路车辆 半挂车牵引座90号牵引销的基本尺寸和安装、互换性尺寸 |
China National Standards Mi |
English PDF |
| GB/T 4606-2006 |
Road vehicles - 50 seMi-trailer fifth wheel coupling pin - Basic and mounting/interchangeability dimensions 道路车辆 半挂车牵引座50号牵引销的基本尺寸和安装、互换性尺寸 |
China National Standards Mi |
English PDF |
| GB/T 20070-2006 |
Road vehicles - Mechanical coupling between tractors and seMi-trailers - Interchangeability 道路车辆 牵引车与半挂车之间机械连接互换性 |
China National Standards Mi |
English PDF |
| GB/T 13577-2006 |
Mill for rubber and plastics 开放式炼胶机炼塑机 |
China National Standards Mi |
English PDF |
| GB 20055-2006 |
Safety requirements of Mill for rubber and plastics 开放式炼胶机炼塑机安全要求 |
China National Standards Mi |
English PDF |
| GB 20054-2006 |
Minimum allowable values of energy efficiency and energy efficiency grades for metal-halide lamps 金属卤化物灯能效限定值及能效等级 |
China National Standards Mi |
English PDF |
| GB 20053-2006 |
The Minimum allowable values of energy efficiency and the energy efficiency grades for ballast of metal-halide lamps 金属卤化物灯用镇流器能效限定值及能效等级 |
China National Standards Mi |
English PDF |
| GB/T 20170.2-2006 |
Test method of physical characters of rare earth metals and compounds DeterMination on specific surface area of rare earth compounds 稀土金属及其化合物物理性能测试方法 稀土化合物比表面积的测定 |
China National Standards Mi |
English PDF |
| GB/T 20170.1-2006 |
Test methods for physical characters of rare earth metals and their compounds DeterMination for particle size distribution of rare earth compounds 稀土金属及其化合物物理性能测试方法 稀土化合物粒度分布的测定 |
China National Standards Mi |
English PDF |
| GB/T 20176-2006 |
Surface cheMical analysis-Secondary-ion mass spectrometry-Determination of boron atomic concentration in silicon using uniformly doped materials 表面化学分析 二次离子质谱 用均匀掺杂物质测定硅中硼的原子浓度 |
China National Standards Mi |
English PDF |
| GB/T 20175-2006 |
Surface cheMical analysis-Sputter depth profiling-Optimization using layered systems as reference materials 表面化学分析 溅射深度剖析 用层状膜系为参考物质的优化方法 |
China National Standards Mi |
English PDF |
| GB/T 20014.1-2005 |
Good agricultural practice -- Part 1: TerMinology 良好农业规范 第1部分：术语 |
China National Standards Mi |
English PDF |
| GB 19997-2005 |
LiMits for noise emitted by combine harvester 谷物联合收割机 噪声限值 |
China National Standards Mi |
English PDF |
| GB/T 8810-2005 |
DeterMination of water absorption of rigid cellular plastics 硬质泡沫塑料吸水率的测定 |
China National Standards Mi |
English PDF |
| GB/T 5538-2005 |
Animal and vegetable fats and oils-DeterMination of peroxide value 动植物油脂 过氧化值测定 |
China National Standards Mi |
English PDF |
| GB/T 5530-2005 |
Animal and vegetable fats and oils-DeterMination of acid value and acidity 动植物油脂 酸值和酸度测定 |
China National Standards Mi |
English PDF |
| GB/T 7742.1-2005 |
Textiles-Bursting properties of fabrics-Part1:Hydraulic method for deterMination of bursting strength and bursting distension 纺织品 织物胀破性能 第1部分:胀破强力和胀破扩张度的测定 液压法 |
China National Standards Mi |
English PDF |
| GB/T 19979.1-2005 |
Geosynthetics-Penetration resist Property-Part1:DeterMination of Static Hydraulic Pressure 土木合成材料 防渗性能 第1部分: 耐静水压的测定 |
China National Standards Mi |
English PDF |
| GB/T 19978-2005 |
Geotextiles and geotextile-related products-DeterMination of the puncture resistance 土工布及其有关产品 刺破强力的测定 |
China National Standards Mi |
English PDF |
| GB/T 19976-2005 |
Textiles-DeterMination of bursting strength-Steel ball method 纺织品 顶破强力的测定 钢球法 |
China National Standards Mi |
English PDF |
| GB/T 15789-2005 |
Geotextiles and geotextiles-related products-DeterMination of water permeability characteristics normal to the plane,without load 土工布及其有关产品 无负荷时垂直渗透特性的测定 |
China National Standards Mi |
English PDF |
| GB/T 14799-2005 |
Geotextiles and geotextile-related products-DeterMination of the effective opening size-Dry sieving method 土工布及其有关产品 有效孔径的测定 干筛法 |
China National Standards Mi |
English PDF |
| GB/T 11039.3-2005 |
Textiles-Tests for colour fastness-Colour fastness to ContaMinants part3:ozone in the atmosphere 纺织品 色牢度试验 耐大气污染物色牢度 第3部分:大气臭氧 |
China National Standards Mi |
English PDF |
| GB/T 11039.2-2005 |
Textiles-Tests for colour fastness-Colour fastness to ContaMinants partG02:burnt-gas fumes 纺织品 色牢度试验 耐大气污染物色牢度 第2部分:燃气烟熏 |
China National Standards Mi |
English PDF |
| GB/T 11039.1-2005 |
Textiles-Tests for colour fastness-Colour fastness to ContaMinants part1:nitrogen oxides 纺织品 色牢度试验 耐大气污染物色牢度 第1部分:氧化氮 |
China National Standards Mi |
English PDF |
| GB/T 11045.14-2005 |
Textiles-Tests for colour fastness-Miscellaneous tests part14:Colour fastness to acid chlorination of wool:sodium dichloroisocyanurate 纺织品 色牢度试验 其他实验第14部分:毛纺织品耐二氯异氰尿酸钠酸性氯化色牢度 |
China National Standards Mi |
English PDF |
| GB/T 11045.13-2005 |
Textiles-Tests for color fastness-Miscellaneous tests part13:Colour fastness of wool dyes to processes using chemical means for creasing pleating and setting 纺织品 色牢度试验 其他实验第13部分:染色毛纺织品耐化学褶被、褶裥和定型加工色牢度 |
China National Standards Mi |
English PDF |
| GB/T 19973.2-2005 |
Sterilization of medical devices -- Microbiological methods -- Part 2: Test of sterility performed in the validation of a sterilization process 医用器材的灭菌 微生物学方法 第二部分：确认灭菌过程的无菌试验 |
China National Standards Mi |
English PDF |
| GB/T 19973.1-2005 |
Sterilization of medical devices -- Microbiological methods -- Part 1: Estimation of population of microorganisms on products 医用器材的灭菌 微生物学方法 第一部分:产品上微生物总数的估计 |
China National Standards Mi |
English PDF |
| GB/T 16886.17-2005 |
Biological evaluation of medical devices -- Part 17: Establishment of allowable liMits for leachable substances 医疗器械生物学评价 第17部分：可沥滤物允许限量的建立 |
China National Standards Mi |
English PDF |
| GB/T 8846-2005 |
TerMinology of moulds for plastics 塑料成型模术语 |
China National Standards Mi |
English PDF |
| GB/T 6104-2005 |
Powered industrial trucks-TerMinology 机动工业车辆 术语 |
China National Standards Mi |
English PDF |
| GB/T 6509-2005 |
Method for deterMination on of low molecular weight compounds content in chip and fibles of polycaproamide 聚己内酰胺切片和纤维中低分子物含量的测定方法 |
China National Standards Mi |
English PDF |
| GB/T 6002.13-2005 |
Textile machinery TerMinology -- Part 13: Dyeing and finishing machinery -- Tentering and heat-treatment machinery 纺织机械术语 第13部分：染整机械 拉幅定形机 |
China National Standards Mi |
English PDF |
| GB/T 6002.12-2005 |
Textile machinery terMinology -- Part 12: Dyeing, fnishing and allied machinery -- Classification and nomenclature 纺织机械术语 第12部分：染整机械及相关机械 分类和名称 |
China National Standards Mi |
English PDF |
| GB/T 20038-2005 |
Textile machinery -- Dyeing and finishing machines -- Definitions and range of noMinal widths 纺织机械 染整机器 公称宽度的定义和系列 |
China National Standards Mi |
English PDF |
| GB/T 9797-2005 |
Metallic coatings -- Electrodeposited coatings of nickel plus chroMium and of copper plus nickel plus chromium 金属覆盖层 镍+铬和铜+镍+铬电镀层 |
China National Standards Mi |
English PDF |
| GB/T 20017-2005 |
Metallic and other inorganic coating -- Measurement of mass per unit area -- Review of gravimetric and cheMical analysis methods 金属和其它无机覆盖层 单位面积质量的测定 重量法和化学分析法评述 |
China National Standards Mi |
English PDF |
| Find out:16715Items | To Page of: First -Previous-Next -Last | [131] [132] [133] [134] [135] [136] [137] |
+86-755-25831330
