GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 25749.7-2012 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 7: Test bench method for the measurement of the pollutant concentration parameter 机械安全 空气传播的有害物质排放的评估 第7部分:测量污染物浓度参数的试验台法 |
China National Standards Part |
English PDF |
GB/T 25749.6-2012 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 6: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with ducted outlet 机械安全 空气传播的有害物质排放的评估 第6部分:测量带导管出口的空气净化系统质量分离效率的试验台法 |
China National Standards Part |
English PDF |
GB/T 25749.5-2012 |
Safety of machinery - Evaluation of the emission of airborne hazardous substances - Part 5: Test bench method for the measurement of the separation efficiency by mass of air cleaning systems with unducted outlet 机械安全 空气传播的有害物质排放的评估 第5部分:测量不带导管出口的空气净化系统质量分离效率的试验台法 |
China National Standards Part |
English PDF |
GB/T 24737.9-2012 |
Guide for technological management - Part 9: Technological management of production field 工艺管理导则 第9部分:生产现场工艺管理 |
China National Standards Part |
English PDF |
GB/T 24737.6-2012 |
Guide for technological management - Part 6: Process optimization and review 工艺管理导则 第6部分:工艺优化与工艺评审 |
China National Standards Part |
English PDF |
GB/T 24737.4-2012 |
Guide for technological management - Part 4: Design of process program 工艺管理导则 第4部分:工艺方案设计 |
China National Standards Part |
English PDF |
GB/T 24737.2-2012 |
Guide for technological management - Part 2: Technological work procedure of products 工艺管理导则 第2部分:产品工艺工作程序 |
China National Standards Part |
English PDF |
GB/T 24737.1-2012 |
Guide for technological management - Part 1: General 工艺管理导则 第1部分:总则 |
China National Standards Part |
English PDF |
GB/T 17889.4-2012 |
Ladders - Part 4: Single or multiple hinge-joint ladders 梯子 第4部分:带有单个或多个铰链的梯子 |
China National Standards Part |
English PDF |
GB/T 17889.3-2012 |
Ladders - Part 3: User instructions 梯子 第3部分:使用说明书 |
China National Standards Part |
English PDF |
GB/T 17889.2-2012 |
Ladders - Part 2: Requirements, test, marking 梯子 第2部分:要求、试验和标志 |
China National Standards Part |
English PDF |
GB/T 17889.1-2012 |
Ladders - Part 1: Terms, types, functional sizes 梯子 第1部分:术语、型式和功能尺寸 |
China National Standards Part |
English PDF |
GB/T 16675.2-2012 |
Technical drawings - Simplified representation - Part 2: Dimensioning 技术制图 简化表示法 第2部分:尺寸注法 |
China National Standards Part |
English PDF |
GB/T 16675.1-2012 |
Technical drawings - Simplified representation - Part 1: Pictorial presentation 技术制图 简化表示法 第1部分:图样画法 |
China National Standards Part |
English PDF |
GB/T 8243.9-2012 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 9: Inlet and outlet anti-drain valve tests 内燃机全流式机油滤清器试验方法 第9部分:进、出口止回阀试验 |
China National Standards Part |
English PDF |
GB/T 28389.2-2012 |
Auto index milling head with axes A,C of main drive - Part 2: Specifications 主传动驱动型AC轴自动分度铣头 第2部分:技术条件 |
China National Standards Part |
English PDF |
GB/T 28389.1-2012 |
Auto index milling head with axes A,C of main drive - Part 1: Testing of accuracy 主传动驱动型AC轴自动分度铣头 第1部分:精度检验 |
China National Standards Part |
English PDF |
GB/T 28388.2-2012 |
Swinging linkage milling head with axes A,C - Part 2: Specifications 摆动式AC轴联动铣头 第2部分:技术条件 |
China National Standards Part |
English PDF |
GB/T 28388.1-2012 |
Swinging linkage milling head with axes A,C - Part 1: Testing of accuracy 摆动式AC轴联动铣头 第1部分:精度检验 |
China National Standards Part |
English PDF |
GB/T 28387.5-2012 |
Safety requirements of the design and construction of printing and paper converting machines - Part 5:Machines for the production of corrugated board and machines for the conversion of flat and corrugated board 印刷机械和纸加工机械的设计及结构安全规则 第5部分:瓦楞纸板生产机械以及纸板和瓦楞纸板加工设备 |
China National Standards Part |
English PDF |
GB/T 28387.4-2012 |
Safety requirements for the design and construction of printing and paper converting machines - Part 4: Bookbinding, paper converting and finishing machines 印刷机械和纸加工机械的设计及结构安全规则 第4部分:书籍装订、纸加工和整饰机械 |
China National Standards Part |
English PDF |
GB/T 28387.2-2012 |
Safety requirements for the design and construction of printing and paper converting machines - Part 2: Printing、varnishing machines and pre-press machinery 印刷机械和纸加工机械的设计及结构安全规则 第2部分:印刷机、上光机和印前机械 |
China National Standards Part |
English PDF |
GB/T 28387.1-2012 |
Safety requirements for the design and construction of printing and paper converting machines - Part 1: Common requirements 印刷机械和纸加工机械的设计及结构安全规则 第1部分:一般要求 |
China National Standards Part |
English PDF |
GB/T 25676.2-2012 |
Printing machinery - Wide format ink-jet printer - Part 2:Plat media wide format ink-jet printer 印刷机械 宽幅面喷绘机 第2部分:平板型宽幅面喷绘机 |
China National Standards Part |
English PDF |
GB/T 20448.1-2012 |
Self-propelled forestry machinery - Laboratory tests and performance requirements for Roll-over protective structure - Part 1:General machinery 自行式林业机械 滚翻保护结构实验室试验和性能要求 第1部分:通用机械 |
China National Standards Part |
English PDF |
GB/T 15370.4-2012 |
General requirement of agricultural tractors - Part 4: Crawler tractors 农业拖拉机 通用技术条件 第4部分:履带拖拉机 |
China National Standards Part |
English PDF |
GB 25936.3-2012 |
Rubber and plastics machines - Size reduction machines - Part 3: Safety requirements for shredders 橡胶塑料粉碎机械 第3部分:切碎机安全要求 |
China National Standards Part |
English PDF |
GB 25936.2-2012 |
Rubber and plastics machines - Size reduction machines - Part 2: Safety requirements for strand pelletisers 橡胶塑料粉碎机械 第2部分:拉条式切粒机安全要求 |
China National Standards Part |
English PDF |
GB 25936.1-2012 |
Rubber and plastics machines - Size reduction machines - Part 1: Safety requirements for blade granulators 橡胶塑料粉碎机械 第1部分:刀片式破碎机安全要求 |
China National Standards Part |
English PDF |
GB/T 22512.1-2012 |
Petroleum and natural gas industries - Rotary drilling equipment - Part 1:Rotary drill stem elements 石油天然气工业 旋转钻井设备 第1部分:旋转钻柱构件 |
China National Standards Part |
English PDF |
GB 4943.1-2011 |
Information technology equipment - Safety - Part 1: General requirements 信息技术设备 安全 第1部分:通用要求 |
China National Standards Part |
English PDF |
GB 27995.2-2011 |
Semi-finished spectacle lens blanks - Part 2: Specifications for progressive power lens blanks 半成品眼镜片毛坯 第2部分:渐变焦眼镜片毛坯规范 |
China National Standards Part |
English PDF |
GB 27995.1-2011 |
Semi-finished spectacle lens blanks - Part 1: Specifications for single-vision and multifocal lens blanks 半成品眼镜片毛坯 第1部分:单光和多焦点眼镜片毛坯规范 |
China National Standards Part |
English PDF |
GB 18802.1-2011 |
Low-voltage surge protective devices - Part 1: Surge protective devices connected to low-voltage power distribution systems -Requirements and tests 低压电涌保护器(SPD) 第1部分:低压配电系统的电涌保护器 性能要求和试验方法 |
China National Standards Part |
English PDF |
GB 16895.21-2011 |
Low-voltage electrical installations - Part 4-41: Protection for safety-Protection against electric shock 低压电气装置 第4-41部分: 安全防护 电击防护 |
China National Standards Part |
English PDF |
GB 14232.3-2011 |
Plastics collapsible containers for human blood and blood components - Part 3: Blood bag systems with integrated features 人体血液及血液成分袋式塑料容器 第3部分:含特殊组件的血袋系统 |
China National Standards Part |
English PDF |
GB/T 8923.1-2011 |
Preparation of steel substrates before application of paints and related products - Visual assessment of surface cleanliness - Part 1: Rust grades and preparation grades of uncoated steel substrates and of steel substrates after overall removal of previou 涂覆涂料前钢材表面处理 表面清洁度的目视评定 第1部分:未涂覆过的钢材表面和全面清除原有涂层后的钢材表面的锈蚀等级和处理等级 |
China National Standards Part |
English PDF |
GB/T 6075.3-2011 |
Mechanical vibration - Evaluation of machine vibration by measurements on non-rotating Parts - Part 3:Industrial machines with nominal power above 15 kW and nominal speeds between 120 r/min and 15 000 r/min when measured in situ 机械振动 在非旋转部件上测量评价机器的振动 第3部分:额定功率大于15kW额定转速在120 r/min至15000r/min之间的在现场测量的工业机器 |
China National Standards Part |
English PDF |
GB/T 5832.3-2011 |
Determination of moisture in gases - Part 3: The method of Cavity Ring-Down Spectroscopy 气体中微量水分的测定 第3部分:光腔衰荡光谱法 |
China National Standards Part |
English PDF |
GB/T 3634.2-2011 |
Hydrogen - Part 2: Pure hydrogen,high pure hydrogen and ultra-pure hydrogen 氢气 第2部分:纯氢、高纯氢和超纯氢 |
China National Standards Part |
English PDF |
GB/T 2889.4-2011 |
Plain bearings - Terms, definitions,classification and symbols - Part 4:Basic symbols 滑动轴承 术语、定义和分类 第4部分:基本符号 |
China National Standards Part |
English PDF |
GB/T 2878.4-2011 |
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 4: Hex plugs 液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第4部分:六角螺塞 |
China National Standards Part |
English PDF |
GB/T 2878.2-2011 |
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 2: heavy-duty stud ends (S series) 液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第2部分:重型螺柱端(S系列) |
China National Standards Part |
English PDF |
GB/T 2878.1-2011 |
Connections for hydraulic fluid power - Ports and stud ends with metric threads and O-ring sealing - Part 1: Ports 液压传动连接 带米制螺纹和O形圈密封的油口和螺柱端 第1部分:油口 |
China National Standards Part |
English PDF |
GB/T 28125.1-2011 |
Determination of hazardous materials in air separation process - Part 1: Determination of hydrocarbons 空分工艺中危险物质的测定 第1部分:碳氢化合物的测定 |
China National Standards Part |
English PDF |
GB/T 27945.3-2011 |
The management of hazardous solid wastes from heat treatment salts Part 3 :Method of innocent treatment 热处理盐浴有害固体废物的管理 第3部分:无害化处理方法 |
China National Standards Part |
English PDF |
GB/T 27945.2-2011 |
The management of hazardous solid wastes from heat treatment salts Part 2:Test method of extractives 热处理盐浴有害固体废物的管理 第2部分:浸出液检测方法 |
China National Standards Part |
English PDF |
GB/T 27945.1-2011 |
The management of hazardous solid wastes from heat treatment salt Part 1 :General management 热处理盐浴有害固体废物的管理 第1部分:一般管理 |
China National Standards Part |
English PDF |
GB/T 27613-2011 |
Hydraulic fluid power - Fluid contamination - Determination of Particulate contamination by the gravimetric method 液压传动 液体污染 采用称重法测定颗粒污染度 |
China National Standards Part |
English PDF |
GB/T 20485.31-2011 |
Methods for the calibration of vibration and shock transducers - Part 31: Testing of transverse vibration sensitivity 振动与冲击传感器的校准方法 第31部分:横向振动灵敏度测试 |
China National Standards Part |
English PDF |
GB/T 18570.6-2011 |
Preparation of steel substrates before application of paints and related products -Tests for the assessment of surface cleanliness - Part6: Extraction of soluble contaminants for analysis -The Bresle method 涂覆涂料前钢材表面处理 表面清洁度的评定试验 第6部分:可溶性杂质的取样 Bresle法 |
China National Standards Part |
English PDF |
GB/T 17850.6-2011 |
Preparation of steel substrates before application of paints and related products - Specifications for non-metallic blast-cleaning abrasives - Part 6: Iron furnace slag 涂覆涂料前钢材表面处理 喷射清理用非金属磨料的技术要求 第6部分:炼铁炉渣 |
China National Standards Part |
English PDF |
GB/T 13288.2-2011 |
Preparation of steel substrates before application of paints and related products - Surface roughness characteristics of blast-cleaned substrates - Part 2: Method for the grading of surface profile of abrasive blast-cleaned steel - Comparator procedure 涂覆涂料前钢材表面处理 喷射清理后的钢材表面粗糙度特性 第2部分:磨料喷射清理后钢材表面粗糙度等级的测定方法 比较样块法 |
China National Standards Part |
English PDF |
GB/T 12613.7-2011 |
Plain bearings - Wrapped bushes - Part 7:Measurement of wall thickness of thin-walled bushes 滑动轴承 卷制轴套 第7部分:薄壁轴套壁厚测量 |
China National Standards Part |
English PDF |
GB/T 12613.6-2011 |
Plain bearings - Wrapped bushes - Part 6:Checking the inside diameter 滑动轴承 卷制轴套 第6部分:内径检验 |
China National Standards Part |
English PDF |
GB/T 12613.5-2011 |
Plain bearings - Wrapped bushes - Part 5: Checking the outside diameter 滑动轴承 卷制轴套 第5部分:外径检验 |
China National Standards Part |
English PDF |
GB/T 12613.4-2011 |
Plain bearings - Wrapped bushes - Part 4: Materials 滑动轴承 卷制轴套 第4部分:材料 |
China National Standards Part |
English PDF |
GB/T 12613.3-2011 |
Plain bearings - Wrapped bushes - Part 3:Lubrication holes, grooves and indentations 滑动轴承 卷制轴套 第3部分:润滑油孔、油槽和油穴 |
China National Standards Part |
English PDF |
GB/T 12613.2-2011 |
Plain bearings - Wrapped bushes - Part 2: Test data for outside and inside diameters 滑动轴承 卷制轴套 第2部分: 外径和内径的检测数据 |
China National Standards Part |
English PDF |
GB/T 12613.1-2011 |
Plain bearings - Wrapped bushes - Part 1:Dimensions 滑动轴承 卷制轴套 第1部分: 尺寸 |
China National Standards Part |
English PDF |
GB/T 11348.3-2011 |
Mechanical vibration - Evaluation of machine vibration by measurements on rotating shafts - Part 3: Coupled industrial machines 机械振动 在旋转轴上测量评价机器的振动 第3部分:耦合的工业机器 |
China National Standards Part |
English PDF |
GB/T 19229.2-2011 |
Coal-fired flue gas desulphurization equipment - Part 2: Coal-fired dry/semi-dry flue gas desulphurization equipment 燃煤烟气脱硫设备 第2部分:燃煤烟气干法/半干法脱硫设备 |
China National Standards Part |
English PDF |
GB/T 27797.9-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 9:Moulding of GMT/STC 纤维增强塑料 试验板制备方法 第9部分:GMT/STC模塑 |
China National Standards Part |
English PDF |
GB/T 27797.8-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 8: Compression moulding of SMC and BMC 纤维增强塑料 试验板制备方法 第8部分:SMC及BMC模塑 |
China National Standards Part |
English PDF |
GB/T 27797.7-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 7: Resin transfer moulding 纤维增强塑料 试验板制备方法 第7部分:树脂传递模塑 |
China National Standards Part |
English PDF |
GB/T 27797.6-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 6: Pultrusion moulding 纤维增强塑料 试验板制备方法 第6部分:拉挤模塑 |
China National Standards Part |
English PDF |
GB/T 27797.5-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 5: Filament winding 纤维增强塑料 试验板制备方法 第5部分:缠绕成型 |
China National Standards Part |
English PDF |
GB/T 27797.3-2011 |
Fibre-reinforced plastics - Methodsof producing test plates - Part 3: Wet compression moulding 纤维增强塑料 试验板制备方法 第3部分:湿法模塑 |
China National Standards Part |
English PDF |
GB/T 27797.2-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 2: Contact and spray-up moulding 纤维增强塑料 试验板制备方法 第2部分:接触和喷射模塑 |
China National Standards Part |
English PDF |
GB/T 27797.1-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 1: General conditions 纤维增强塑料 试验板制备方法 第1部分:通则 |
China National Standards Part |
English PDF |
GB/T 27797.11-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 11: Injection moulding of BMC and other long-fibre moulding compounds - Small plates 纤维增强塑料 试验板制备方法 第11部分:BMC和其他长纤维模塑料注射模塑 小方片 |
China National Standards Part |
English PDF |
GB/T 27797.10-2011 |
Fibre-reinforced plastics - Methods of producing test plates - Part 10: Injection moulding of BMC and other long-fibre moulding compounds - General principles and moulding of multipurpose test specimens 纤维增强塑料 试验板制备方法 第10部分:BMC和其他长纤维模塑料注射模塑 一般原理和通用试样模塑 |
China National Standards Part |
English PDF |
GB/T 27845-2011 |
Chemicals - Test method for Particle-size analysis of soils 化学品 土壤粒度分析试验方法 |
China National Standards Part |
English PDF |
GB/T 7332-2011 |
Fixed capacitors for use in electronic equipment - Part 2: Sectional specification - Fixed metallized polyethylene-terephthalate film dielectric d.c.capacitors 电子设备用固定电容器 第2部分:分规范 金属化聚乙烯对苯二甲酸酯膜介质直流固定电容器 |
China National Standards Part |
English PDF |
GB/T 5968-2011 |
Fixed capacitors for use in electronic equipment - Part 9: Sectional specification:Fixed capacitors of ceramic dielectric,Class 2 电子设备用固定电容器 第9部分:分规范 2类瓷介固定电容器 |
China National Standards Part |
English PDF |
GB/T 5967-2011 |
Fixed capacitors for use in electronic equipment - Part 8-1: Blank detail specification: Fixed capacitor of ceramic dielectric,Class 1 - Assessment level EZ 电子设备用固定电容器 第8-1部分:空白详细规范 1类瓷介固定电容器 评定水平 EZ |
China National Standards Part |
English PDF |
GB/T 5966-2011 |
Fixed capacitors for use in electronic equipment - Part 8: Sectional specification: Fixed capacitors of ceramic dielectric,Class 1 电子设备用固定电容器 第8部分:分规范 1类瓷介固定电容器 |
China National Standards Part |
English PDF |
GB/T 28162.3-2011 |
Packaging of components for automatic handing - Part 3: Packaging of surface mount components on continuous tapes 自动操作用元器件的包装 第3部分:表面安装元器件在连续带上的包装 |
China National Standards Part |
English PDF |
GB/T 28059.4-2011 |
Image information management system for highway network - Platform networking and sharing - Part 4: User and equipment management 公路网图像信息管理系统 平台互联技术规范 第4部分:用户及设备管理 |
China National Standards Part |
English PDF |
GB/T 28059.3-2011 |
Image information management system for highway network - Platform networking and sharing - Part 3: Interface and communication protocol 公路网图像信息管理系统 平台互联技术规范 第3部分:接口与通信控制协议 |
China National Standards Part |
English PDF |
GB/T 28059.2-2011 |
Image information management system for public traffic network -Platform networking and sharing - Part 2: Video format and coding 公路网图像信息管理系统 平台互联技术规范 第2部分:视频格式与编码 |
China National Standards Part |
English PDF |
GB/T 28059.1-2011 |
Image information management system for highway network - Platform networking and sharing - Part 1: General specification 公路网图像信息管理系统 平台互联技术规范 第1部分:总则 |
China National Standards Part |
English PDF |
GB/T 18477.2-2011 |
Unplasticized polyvinyl chloride (PVC-U) structure wall pipeline system for underground soil waste and draindge - Part 2: Ultra-Rib pipes 埋地排水用硬聚氯乙烯(PVC-U)结构壁管道系统 第2部分:加筋管材 |
China National Standards Part |
English PDF |
GB/T 15157.12-2011 |
Connectors for frequencies below 3 MHz for use with printed boards - Part 12: Detail specification for dimensions, general requirements and tests for a range of sockets designed for use with integrated circuits 频率低于3MHz的印制板连接器 第12部分:集成电路插座的尺寸、一般要求和试验方法详细规范 |
China National Standards Part |
English PDF |
GB/T 11441.2-2011 |
Laminations for transformers and inductors for use in telecommunication and electronic equipment - Part 2: Specification for the minimum permeabilities of laminations made of soft magnetic metallic materials 通信和电子设备用变压器和电感器铁心片 第2部分:软磁金属叠片最低磁导率规范 |
China National Standards Part |
English PDF |
GB/T 10191-2011 |
Fixed capacitors for use in electronic equipment - Part 16-1: Blank detail specification:Fixed metallized polypropylene film dielectric d.c.capacitors - Assessment levels E and EZ 电子设备用固定电容器 第16-1部分:空白详细规范 金属化聚丙烯膜介质直流固定电容器 评定水平E和EZ |
China National Standards Part |
English PDF |
GB/T 28177.2-2011 |
Identification cards - Thin flexible cards - Part 2: Magnetic recording technique 识别卡 柔性薄卡 第2部分:磁记录技术 |
China National Standards Part |
English PDF |
GB/T 28177.1-2011 |
Identification cards - Thin flexible cards - Part 1: Physical characteristics 识别卡 柔性薄卡 第1部分:物理特性 |
China National Standards Part |
English PDF |
GB/T 28174.4-2011 |
Unified modeling language(UML) - Part 4: Diagram interchange 统一建模语言(UML) 第4部分:图交换 |
China National Standards Part |
English PDF |
GB/T 28174.3-2011 |
Unified modeling language(UML) - Part 3: Object constraint language(OCL) 统一建模语言(UML) 第3部分:对象约束语言(OCL) |
China National Standards Part |
English PDF |
GB/T 28174.2-2011 |
Unified modeling language(UML)- Part 2: Superstructure specification 统一建模语言(UML) 第2部分:上层结构 |
China National Standards Part |
English PDF |
GB/T 28174.1-2011 |
Unified modeling language(UML) - Part 1: Infrastructure 统一建模语言(UML) 第1部分:基础结构 |
China National Standards Part |
English PDF |
GB/T 28170.1-2011 |
Information technology - Computer graphics and image processing - Extensible 3D (X3D)- Part 1: Architecture and base component 信息技术 计算机图形和图像处理 可扩展三维组件(X3D) 第1部分:体系结构和基础组件 |
China National Standards Part |
English PDF |
GB/T 27992.1-2011 |
Water depth finding equipment - Part 1:Hydrologic sounding rod 水深测量仪器 第1部分:水文测杆 |
China National Standards Part |
English PDF |
GB/T 27991-2011 |
Fundamental technical requirements for sediment measurement and Particle size analysis instrument in open channel 河流泥沙测验及颗粒分析仪器基本技术条件 |
China National Standards Part |
English PDF |
GB/T 27934.4-2011 |
Lamination process control and testing methods for paper prints - Part 4: Lamination with polyurethane reactive hot melt adhesive 纸质印刷品覆膜过程控制及检测方法 第4部分:反应型聚氨酯(PUR)热熔胶即涂覆膜 |
China National Standards Part |
English PDF |
GB/T 27934.3-2011 |
Lamination process control and testing methods for paper prints - Part 3: Drying lamination with water-based adhesive 纸质印刷品覆膜过程控制及检测方法 第3部分:水基胶黏剂即涂干式覆膜 |
China National Standards Part |
English PDF |
GB/T 27934.2-2011 |
Lamination process control and testing methods for paper prints - Part 2: Lamination with EVA adhesive 纸质印刷品覆膜过程控制及检测方法 第2部分:乙烯-醋酸乙烯共聚物(EVA)热熔胶预涂覆膜 |
China National Standards Part |
English PDF |
GB/T 27905.5-2011 |
Inspection methods for trace and physical evidences from fire scene- Part 5:Small power induction motor 火灾物证痕迹检查方法 第5部分:小功率异步电动机 |
China National Standards Part |
English PDF |
GB/T 27905.4-2011 |
Inspection methods for trace and physical evidences from fire scene-Part 4: Electrical wire 火灾物证痕迹检查方法 第4部分:电气线路 |
China National Standards Part |
English PDF |
Find out:14234Items | To Page of: First -Previous-Next -Last | [73] [74] [75] [76] [77] [78] [79] |