GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB/T 1844.2-2008 |
Plastic-Symbols and abbreviated-Part 2: Fillers and reinforcing materials 塑料 符号和缩略语 第2部分:填充及增强材料 |
China National Standards Plastic |
English PDF |
GB/T 1844.1-2008 |
Plastics - Symbols and abbreviated terms - Part 1: Basic polymers and their special characteristics 塑料 符号和缩略语 第1部分: 基础聚合物及其特征性能 |
China National Standards Plastic |
English PDF |
GB/T 1843-2008 |
Plastics - Determination of izod impact strength 塑料 悬臂梁冲击强度的测定 |
China National Standards Plastic |
English PDF |
GB/T 16582-2008 |
Plastics - Determination of melting behaviour (melting temperature or melting range) of semi-crystalline polymers by capillary tube and polarizing-microscope methods 塑料 用毛细管法和偏光显微镜法测定部分结晶聚合物熔融行为(熔融温度或熔融范围) |
China National Standards Plastic |
English PDF |
GB/T 16578.1-2008 |
Plastics - Film and sheeting - Determination of tear resistance - Part 1:Trouser tear method 塑料 薄膜和薄片 耐撕裂性能的测定 第1部分: 裤形撕裂法 |
China National Standards Plastic |
English PDF |
GB/T 1636-2008 |
Plastics - Determination of apparent density material that can be poured from a specified funnel 塑料 能从规定漏斗流出的材料表观密度的测定 |
China National Standards Plastic |
English PDF |
GB/T 1632.1-2008 |
Plastics - Determination of the viscosity of polymers in dilute solution using capillary viscometers - Part1:General principles 塑料 使用毛细管粘度计测定聚合物稀溶液粘度 第1部分:通则 |
China National Standards Plastic |
English PDF |
GB/T 1630.1-2008 |
Plastics - Epoxy resins - Part 1: Designation 塑料 环氧树脂 第1部分:命名 |
China National Standards Plastic |
English PDF |
GB/T 15223-2008 |
Plastics - Liquid resins - Determination of density by the pyknometer method 塑料 液体树脂 用比重瓶法测定密度 |
China National Standards Plastic |
English PDF |
GB/T 14484-2008 |
Plastics - Determination of bearing strength 塑料 承载强度的测定 |
China National Standards Plastic |
English PDF |
GB/T 1404.2-2008 |
Plastics - Phenolic powder moulding compounds - Part 2: Preparation of test specimens and determination of properties 塑料 粉状酚醛模塑料 第2部分: 试样制备和性能测定 |
China National Standards Plastic |
English PDF |
GB/T 1404.1-2008 |
Plastics - Phenolic powder moulding compounds - Part 1: Designation system and basis for specifications 塑料 粉状酚醛模塑料 第1部分: 命名方法和基础规范 |
China National Standards Plastic |
English PDF |
GB/T 12010.1-2008 |
Plastics - Poly(vinyl alcohol)(PVAL) materials - Part 1: Designation system and basis for specifications 塑料 聚乙烯醇材料(PVAL) 第1部分:命名系统和分类基础 |
China National Standards Plastic |
English PDF |
GB/T 12003-2008 |
UnPlasticized polyvinyl chloride(PVC-U) windows - Determination of dimensions 未增塑聚氯乙烯(PVC-U)塑料窗 外形尺寸的测定 |
China National Standards Plastic |
English PDF |
GB/T 11547-2008 |
Plastic - Methods of test for the determination of the effects of immersion in liquid chemicals 塑料 耐液体化学试剂性能的测定 |
China National Standards Plastic |
English PDF |
GB/T 11546.1-2008 |
Plastic - Determination of creep behaviour - Part 1: Tensile creep 塑料 蠕变性能的测定 第1部分:拉伸蠕变 |
China National Standards Plastic |
English PDF |
GB/T 1043.1-2008 |
Plastics - Determination of charpy impact properties - Part 1: Non - instrumented impact test 塑料 简支梁冲击性能的测定 第1部分:非仪器化冲击试验 |
China National Standards Plastic |
English PDF |
GB/T 1041-2008 |
Plastics - Detemination of compressive properties 塑料 压缩性能的测定 |
China National Standards Plastic |
English PDF |
GB/T 1040.5-2008 |
Plastics - Determination of tensile properties - Part 5: Test conditions for unidirectional fibre-reinforced plastic composites 塑料 拉伸性能的测定 第5部分:单向纤维增强复合材料的试验条件 |
China National Standards Plastic |
English PDF |
GB/T 1036-2008 |
Test method for coefficient of linear thermal expansion of Plastics between -30℃ and 30℃ with a vitreous silica dilatometer 塑料 -30℃~30℃线膨胀系数的测定 石英膨胀计法 |
China National Standards Plastic |
English PDF |
GB/T 1034-2008 |
Plastics - Determination of water absorption 塑料 吸水性的测定 |
China National Standards Plastic |
English PDF |
GB/T 1033.1-2008 |
Plastics - Methods for determining the density of non-cellular plastics - Part 1: Immersion method, liquid pyknometer method and titration method 塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法 |
China National Standards Plastic |
English PDF |
GB/T 21461.1-2008 |
Plastics - Ultra-high-molecular-weight polyethylene(PE-UHMW) moulding and extrusion materials - Part 1: Designation system and basis for specifications 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards Plastic |
English PDF |
GB/T 21460.1-2008 |
Plastics - Styrene-acrylonitrile (SAN) moulding and extrusion materials - Part 1: Designation system and basis for specifications 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards Plastic |
English PDF |
GB/T 20417.1-2008 |
Plastics - Acrylonitrile-butadiene-Styrene(ABS) moulding and extrusion materials - Part 1: Designation system and basis for specifications 塑料 丙烯腈-丁二烯-苯乙烯(ABS)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards Plastic |
English PDF |
GB/T 18964.1-2008 |
Plastics - Impact-resistant Polystyrene (PS-I) moulding and extrusion materials -Part 1: Designation system and basis for specifications 塑料 抗冲击聚苯乙烯(PS-I)模塑和挤出材料 第1部分:命名系统和分类基础 |
China National Standards Plastic |
English PDF |
GB/T 1842-2008 |
Plastics - Test method for environmental stress-cracking of polyethylene 塑料 聚乙烯环境应力开裂试验方法 |
China National Standards Plastic |
English PDF |
GB/T 13376-2008 |
Plastic scintillators 塑料闪烁体 |
China National Standards Plastic |
English PDF |
GB/T 9330.2-2008 |
Plastic insulated control cables - Part 2:Polyvinyl chloride insulated and sheathed control cables 塑料绝缘控制电缆 第2部分:聚氯乙烯绝缘和护套控制电缆 |
China National Standards Plastic |
English PDF |
GB/T 9330.1-2008 |
Plastic insulated control cables - Part 1: General requirements 塑料绝缘控制电缆 第1部分:一般规定 |
China National Standards Plastic |
English PDF |
GB/T 7190.2-2008 |
Glass fiber reinforced Plastic cooling tower - Part 2: Large glass fiber reinforced plastic cooling tower 玻璃纤维增强塑料冷却塔 第2部分: 大型玻璃纤维增强塑料冷却塔 |
China National Standards Plastic |
English PDF |
GB/T 7190.1-2008 |
Glass fiber reinforced Plastic cooling tower - Part 1: Middle and small glass fiber reinforced plastic cooling tower 玻璃纤维增强塑料冷却塔 第1部分: 中小型玻璃纤维增强塑料冷却塔 |
China National Standards Plastic |
English PDF |
GB/T 5258-2008 |
Fiber-reinforced Plastic composites - Determination of compressive properties in the in-plane direction 纤维增强塑料面内压缩性能试验方法 |
China National Standards Plastic |
English PDF |
GB/T 3365-2008 |
Carbon fiber reinforced Plastics - Determination of void content and fiber volume content 碳纤维增强塑料孔隙含量和纤维体积含量试验方法 |
China National Standards Plastic |
English PDF |
GB/T 2573-2008 |
Test method for aging properties of glass fiber reinforced Plastics 玻璃纤维增强塑料老化性能试验方法 |
China National Standards Plastic |
English PDF |
GB/T 16779-2008 |
Test method for tension-tension fatigue of fiber reinforced Plastic laminates 纤维增强塑料层合板拉-拉疲劳性能试验方法 |
China National Standards Plastic |
English PDF |
GB/T 15928-2008 |
Reinforced Plastics based on unsaturated polyester resins - Determination of residual styrene monomer content 不饱和聚酯树脂基增强塑料中残留苯乙烯单体含量的测定 |
China National Standards Plastic |
English PDF |
GB/T 15738-2008 |
Test method for resistivity of conducting and antistatic fiber reinforced Plastics 导电和抗静电纤维增强塑料电阻率试验方法 |
China National Standards Plastic |
English PDF |
GB/T 1458-2008 |
Test method for mechanical properties of ring of filament-winding reinforced Plastics 纤维缠绕增强塑料环形试样力学性能试验方法 |
China National Standards Plastic |
English PDF |
GB/T 13096-2008 |
Test method for mechanical properties of pultruded glass fiber reinforced Plastic rods 拉挤玻璃纤维增强塑料杆力学性能试验方法 |
China National Standards Plastic |
English PDF |
GB/T 9343-2008 |
Test method for flammability of Plastics - Determination of flash-ignition temperature and self-ignition temperature 塑料燃烧性能试验方法 闪燃温度和自燃温度的测定 |
China National Standards Plastic |
English PDF |
GB/T 4610-2008 |
Plastics - Determination of ignition temperature using a hot-air furnace 塑料 热空气炉法点着温度的测定 |
China National Standards Plastic |
English PDF |
GB/T 17200-2008 |
Technical specification for tensile, compression and flexural testing machines for rubber and Plastics (constant rate of rtaverse) 橡胶塑料拉力、压力和弯曲试验机(恒速驱动) 技术规范 |
China National Standards Plastic |
English PDF |
GB/T 8661-2008 |
Plastics - Styrene/acrylonitrile copolymers - Determination of residual acrylonitrile monomer content - Gas chromatography method 塑料 苯乙烯-丙烯腈共聚物残留丙烯腈单体含量的测定 气相色谱法 |
China National Standards Plastic |
English PDF |
GB/T 2412-2008 |
Plastics - Polypropylene(PP) and propylene copolymer thermoplastics - Determination of isotactic index 塑料 聚丙烯(PP)和丙烯共聚物热塑性塑料等规指数的测定 |
China National Standards Plastic |
English PDF |
GB/T 22040-2008 |
Technical requirements and determination of weathering quality for Plastics of highway furnatures 公路沿线设施塑料制品耐候性要求及测试方法 |
China National Standards Plastic |
English PDF |
GB/T 22027-2008 |
ThermoPlastic elastomers - Nomenclature and abbreviated terms 热塑性弹性体 命名和缩略语 |
China National Standards Plastic |
English PDF |
GB/T 22236-2008 |
Testing of Plastics Size reduction of plastic products for test purposes 塑料的检验 检验用塑料制品的粉碎 |
China National Standards Plastic |
English PDF |
GB/T 22047-2008 |
Plastics - Determination of the ultimate aerobic biodegradability in soil by measuring the oxygen demand in a respirometer or the amount of carbon dioxide evolved 土壤中塑料材料最终需氧生物分解能力的测定 采用测定密闭呼吸计中需氧量或测定释放的二氧化碳的方法 |
China National Standards Plastic |
English PDF |
GB/T 1677-2008 |
Determinating the epoxy value of Plasticizers 增塑剂环氧值的测定 |
China National Standards Plastic |
English PDF |
GB/T 1676-2008 |
Determinating the iodine value of Plasticizers 增塑剂碘值的测定 |
China National Standards Plastic |
English PDF |
GB/T 1671-2008 |
Plasticizers - Determination of flash point - Cleveland open cup method 增塑剂闪点的测定 克利夫兰开口杯法 |
China National Standards Plastic |
English PDF |
GB/T 1670-2008 |
Plasticizers - Test method of heat resistance 增塑剂热稳定性试验 |
China National Standards Plastic |
English PDF |
GB/T 1665-2008 |
Plasticizers - Determination of saponification value and ester-content 增塑剂皂化值及酯含量的测定 |
China National Standards Plastic |
English PDF |
GB/T 1660-2008 |
Determinating the kincmatic viscosity of Plasticizers 增塑剂运动黏度的测定 |
China National Standards Plastic |
English PDF |
GB/T 14522-2008 |
Artificial weathering test method for Plastics,coating and rubber materials used for machinery industrial products - Fluorescent UV lamps 机械工业产品用塑料、涂料、橡胶材料人工气候老化试验方法 荧光紫外灯 |
China National Standards Plastic |
English PDF |
GB/T 9870.2-2008 |
Rubber, vulcanized or thermoPlastic - Determination of dynamic properties - Part 2:Torsion pendulum methods at low frequencies 硫化橡胶或热塑性橡胶动态性能的测定 第2部分:低频扭摆法 |
China National Standards Plastic |
English PDF |
GB/T 9267-2008 |
Emulsions for coatings and polymer dispersions for coatings and Plastics - Determination of white point temperature and minimum film-forming temperature 涂料用乳液和涂料、塑料用聚合物分散体 白点温度和最低成膜温度的测定 |
China National Standards Plastic |
English PDF |
GB/T 6743-2008 |
Plastics(polyester resins) and paints and varnishes(binders) - Determination of partial acid value and total acid value 塑料用聚酯树脂、色漆和清漆用漆基 部分酸值和总酸值的测定 |
China National Standards Plastic |
English PDF |
GB/T 533-2008 |
Rubber,vulcanized or thermoPlastic - Determination of density 硫化橡胶或热塑性橡胶 密度的测定 |
China National Standards Plastic |
English PDF |
GB/T 532-2008 |
Rubber, vulcanized or thermoPlastic - Determination of adhesion to textile fabric 硫化橡胶或热塑性橡胶与织物粘合强度的测定 |
China National Standards Plastic |
English PDF |
GB/T 531.1-2008 |
Rubber, vulcanized or thermoPlastic - Determination of indentation hardness - Part 1:Duromerer method (Shore hardness) 硫化橡胶或热塑性橡胶 压入硬度试验方法 第1部分:邵氏硬度计法(邵尔硬度) |
China National Standards Plastic |
English PDF |
GB/T 529-2008 |
Rubber,vulcanized or thermoPlastic - Determination of tear strength(Trouser,angle and crescent test pieces) 硫化橡胶或热塑性橡胶撕裂强度的测定(裤形、直角形和新月形试样) |
China National Standards Plastic |
English PDF |
GB/T 21991-2008 |
Plastics - Preparation of PVC paste for test purpose - Planetary-mixer method 塑料 试验用聚氯乙烯(PVC)糊的制备 行星混合器法 |
China National Standards Plastic |
English PDF |
GB/T 21989-2008 |
Plastics - Poly(vinyl chloride)pastes - Determination of apparent viscosity using the severs rheometer 塑料 聚氯乙烯糊 用Severs流变仪测定表观黏度 |
China National Standards Plastic |
English PDF |
GB/T 21988-2008 |
Plastics-Vinyl chloride homopolymer and copolymer resins-Sieve analysis in water 塑料 氯乙烯均聚和共聚树脂 水中筛分析 |
China National Standards Plastic |
English PDF |
GB/T 1668-2008 |
Plasticizers - Determination of acid value and acidity 增塑剂酸值及酸度的测定 |
China National Standards Plastic |
English PDF |
GB/T 16613-2008 |
Plastics - Preparation of PVC pastes for test purposes - Dissolver method 塑料 试验用聚氯乙烯(PVC)糊的制备 分散器法 |
China National Standards Plastic |
English PDF |
GB/T 12830-2008 |
Rubber,vulcanized or thermoPlastic - Determination of shear modulus and adhesion to rigid plates - Quadruple shear methods 硫化橡胶或热塑性橡胶 与刚性板剪切模量和粘合强度的测定 四板剪切法 |
China National Standards Plastic |
English PDF |
GB/T 21928-2008 |
Determination of phthalate esters in food Plastic packaging materials 食品塑料包装材料中邻苯二甲酸酯的测定 |
China National Standards Plastic |
English PDF |
GB/T 9348-2008 |
Plastics - Poly(vinyl chloride) resins - Determination of number of impurities and foreign particles 塑料 聚氯乙烯树脂 杂质与外来粒子数的测定 |
China National Standards Plastic |
English PDF |
GB/T 2914-2008 |
Plastics - Homopolymer and copolymer resins of vinyl chloride - Determination of volatile matter (including water) 塑料 氯乙烯均聚和共聚树脂 挥发物(包括水)的测定 |
China National Standards Plastic |
English PDF |
GB/T 21843-2008 |
Plastics - Vinyl chloride homopolymer and copolymer resins - Particle size determination by mechanical sieving 塑料 氯乙烯均聚和共聚树脂 用机械筛测定粒径 |
China National Standards Plastic |
English PDF |
GB/T 1685-2008 |
Rubber,vulcanized or thermoPlastic - Determination of stress relaxation in compression at ambient and at elevated temperatures 硫化橡胶或热塑性橡胶 在常温和高温下压缩应力松弛的测定 |
China National Standards Plastic |
English PDF |
GB/T 9900-2008 |
Rubber - or Plastics-coated fabrics - Ventilation ducting 橡胶或塑料涂覆织物 导风筒 |
China National Standards Plastic |
English PDF |
GB/T 21874-2008 |
Elastomeric seals - Requirements for materials for pipe joint seals used in water and drainage applications - ThermoPlastic elastomers 弹性体密封件 排水管道接口密封件材料要求 热塑性弹性体 |
China National Standards Plastic |
English PDF |
GB/T 21283.5-2008 |
Rotary shaft lip-type seals incorporating thermoPlastic sealing elements - Part 5: Identification of visual imperfections 密封元件为热塑性材料的旋转轴唇形密封圈 第5部分 外观缺陷的识别 |
China National Standards Plastic |
English PDF |
GB/T 21283.4-2008 |
Rotary shaft lip-type seals incorporating thermoPlastic sealing elements - Part 4: Performance test procedures 密封元件为热塑性材料的旋转轴唇形密封圈 第4部分:性能试验程序 |
China National Standards Plastic |
English PDF |
GB/T 21283.3-2008 |
Rotary shaft lip-type seals incorporating thermoPlastic sealing elements - Part 3 :Storage,handling and installation 密封元件为热塑性材料的旋转轴唇形密封圈 第3部分:贮存、搬运和安装 |
China National Standards Plastic |
English PDF |
GB/T 15907-2008 |
Rubber and Plastics hoses - Method of test for flammability 橡胶和塑料软管 可燃性试验方法 |
China National Standards Plastic |
English PDF |
GB/T 12722-2008 |
Rubber and Plastics hose assemblies - Flexing combined with hydraulic impulse test(half-omega test) 橡胶和塑料软管组合件 液压脉冲曲挠试验(半Ω试验) |
China National Standards Plastic |
English PDF |
GB/T 12584-2008 |
Rubber or Plastics coated fabrics - Low-temperature impact test 橡胶或塑料涂覆织物 低温冲击试验 |
China National Standards Plastic |
English PDF |
GB/T 17748-2008 |
Aluminium-Plastic composite panel for curtain wall 建筑幕墙用铝塑复合板 |
China National Standards Plastic |
English PDF |
GB/T 21662-2008 |
The puick testing method and evaluation for Plastic shopping bags 塑料购物袋的快速检测方法与评价 |
China National Standards Plastic |
English PDF |
GB/T 21661-2008 |
Plastic shopping bags 塑料购物袋 |
China National Standards Plastic |
English PDF |
GB 21660-2008 |
The general requirement for environmental protection, safety, identification and marking of Plastic shopping bags 塑料购物袋的环保、安全和标识通用技术要求 |
China National Standards Plastic |
English PDF |
GB/T 16288-2008 |
Marking of Plastics products 塑料制品的标志 |
China National Standards Plastic |
English PDF |
GB/T 21529-2008 |
Determination of water vapour transmission rate for Plastic film and sheeting - Electrolytic detection sensor method 塑料薄膜和薄片水蒸气透过率的测定 电解传感器法 |
China National Standards Plastic |
English PDF |
GB/T 18943-2008 |
Cellular rubbers and Plastics - Determination of dynamic cushioning performance 多孔橡胶与塑料 动态缓冲性能测定 |
China National Standards Plastic |
English PDF |
GB/T 9871-2008 |
Rubber,vulcanized or thermoPlastic-Determination of aging characteristics by measurement of stress relaxation 硫化橡胶或热塑性橡胶老化性能的测定 拉伸应力松弛试验 |
China National Standards Plastic |
English PDF |
GB/T 9867-2008 |
Rubber, vulcanized or thermoPlastic-Determination of abrasion resistance using a rotating cylindrical drum device 硫化橡胶或热塑性橡胶耐磨性能的测定(旋转辊筒式磨耗机法) |
China National Standards Plastic |
English PDF |
GB/T 3511-2008 |
Rubber, vulcanized or thermoPlastic - Resistance to weathering 硫化橡胶或热塑性橡胶 耐候性 |
China National Standards Plastic |
English PDF |
GB/T 21526-2008 |
Structural adhesives - Guidelines for the surface preparation of metals and Plastics prior to adhesive bonding 结构胶粘剂 粘接前金属和塑料表面处理导则 |
China National Standards Plastic |
English PDF |
GB/T 4219.1-2008 |
Plastics piping system for industrial applications - Unplasticized poly(vinyl chloride)(PVC-U) - Specifications for components and the system - Part 1: Pipes 工业用硬聚氯乙烯(PVC-U)管道系统 第1部分:管材 |
China National Standards Plastic |
English PDF |
GB/T 21558-2008 |
Rigid polyurethane cellular Plastics used in the thermal insulation of building 建筑绝热用硬质聚氨酯泡沫塑料 |
China National Standards Plastic |
English PDF |
GB/T 17689-2008 |
Geosynthetics - Plastic geogrids 土工合成材料 塑料土工格栅 |
China National Standards Plastic |
English PDF |
GB/T 21492-2008 |
Glass fiber reinforced Plastics jacking pipe 玻璃纤维增强塑料顶管 |
China National Standards Plastic |
English PDF |
GB/T 21461.2-2008 |
Plastics - Ultra-high-molecular-weight polyethylene (PE-UHMW) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 超高分子量聚乙烯(PE-UHMW)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastic |
English PDF |
GB/T 21460.2-2008 |
Plastics - Styrene/acrylonitrile(SAN) moulding and extrusion materials - Part 2: Preparation of test specimens and determination of properties 塑料 苯乙烯-丙烯腈(SAN)模塑和挤出材料 第2部分: 试样制备和性能测定 |
China National Standards Plastic |
English PDF |
GB/T 8813-2008 |
Rigid cellular Plastics - Determination of compression properties 硬质泡沫塑料压缩性能的测定 |
China National Standards Plastic |
English PDF |
Find out:1286Items | To Page of: First -Previous-Next -Last | [4] [5] [6] [7] [8] [9] [10] |