Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 6730.64-2007 |
Iron oREs - Determination of water soluble chloride content - Ion-selective electrode method 铁矿石 水溶性氯化物含量的测定 离子选择电极法 |
China National Standards RE |
 English PDF |
| GB/T 6730.5-2007 |
Iron oREs - Determination of total iron content - Titanium(III) chloride reduction method 铁矿石 全铁含量的测定 三氯化钛还原法 |
China National Standards RE |
English PDF |
| GB/T 6730.13-2007 |
Iron oREs - Determination of calcium and magnesium content - EGTA-CyDTA titrimetric method 铁矿石 钙和镁含量的测定 EGTA-CyDTA滴定法 |
China National Standards RE |
English PDF |
| GB/T 6730.11-2007 |
Iron oREs - Determination of aluminium content - EDTA titrimetric method 铁矿石 铝含量的测定 EDTA滴定法 |
China National Standards RE |
English PDF |
| GB/T 3274-2007 |
Hot-rolled plates and strips of carbon structural steels and high stREngth low alloy structural steels 碳素结构钢和低合金结构钢热轧厚钢板和钢带 |
China National Standards RE |
English PDF |
| GB/T 21074-2007 |
Cold rolled stainless pREcision steel strip for needle tubing 针管用不锈钢精密冷轧钢带 |
China National Standards RE |
English PDF |
| GB/T 21073-2007 |
Epoxy-coated seven-wiRE prestressing steel strand 环氧涂层七丝预应力钢绞线 |
China National Standards RE |
English PDF |
| GB 1499.2-2007 |
Steel for the REinforcement of concrete - Part 2: Hot rolled bars 钢筋混凝土用钢 第2部分：热轧带肋钢筋 |
China National Standards RE |
English PDF |
| GB/T 21069-2007 |
Natural gas - Determination of water content at high pREssure 天然气 高压下水含量的测定 |
China National Standards RE |
English PDF |
| GB/T 6373-2007 |
Surface active agents - Determination of appaREnt density 表面活性剂 表观密度的测定 |
China National Standards RE |
English PDF |
| GB/T 5553-2007 |
Surface active agents - Determination of water REpellency of waterprooting agents 表面活性剂 防水剂 防水力测定法 |
China National Standards RE |
English PDF |
| GB/T 3401-2007 |
Determination of the viscosity of Poly(vinyl chloride) REsins in dilute solution using capillary viscometers 用毛细管黏度计测定聚氯乙烯树脂稀溶液的黏度 |
China National Standards RE |
English PDF |
| GB/T 2916-2007 |
Plastic - Vinyl chloride homopolymer and copolymer REsins - Sieve analysis using air-jet sieve apparatus 塑料 氯乙烯均聚和共聚树脂 用空气喷射筛装置的筛分析 |
China National Standards RE |
English PDF |
| GB/T 21059-2007 |
Plastics - polymers/REsins in the liquid state or as emulsions or dispersions - Determination of viscosity using a rotational viscometer with defined shear rate 塑料 液态或乳液态或分散体系聚合物/树脂 用旋转黏度计在规定剪切速率下黏度的测定 |
China National Standards RE |
English PDF |
| GB/T 21010-2007 |
CurREnt land use classification 土地利用现状分类 |
China National Standards RE |
English PDF |
| GB/T 5169.14-2007 |
FiRE hazard testing for electric and eletronic products - Part 14: Test flames-1kW nominal pre-mixed flame - Apparatus,confirmatory test arrangement 电工电子产品着火危险试验 第14部分：试验火焰 1kW标称预混合型火焰 设备、确认试验方法和导则 |
China National Standards RE |
English PDF |
| GB/T 21067-2007 |
Electrical equipment of industrial machines - Electromagnetic compatibility - Immunity of general REquirements 工业机械电气设备 电磁兼容 通用抗扰度要求 |
China National Standards RE |
English PDF |
| GB/T 21066-2007 |
Electrical installations of ships and mobile and fixed offshoRE units - Procedures for calculating short-circuit currents in three phase a.c. 船舶和移动式及固定式近海设施的电气装置 三相交流短路电流计算方法 |
China National Standards RE |
English PDF |
| GB/T 27021-2007 |
Conformity assessment - REquirements for bodies providing audit and certification of management systems 合格评定 管理体系审核认证机构的要求 |
China National Standards RE |
English PDF |
| GB/T 21005-2007 |
UV erythema REference action spectrum,standard erythema dose and UV index 紫外红斑效应参照谱、标准红斑剂量和紫外指数 |
China National Standards RE |
English PDF |
| GB/T 21000.2-2007 |
Commercial REfrigerated cabinets - Test methods - Part 2: Test for accidental mechanical contact 商用冷藏柜 试验方法 第2部分: 偶然机械性接触试验 |
China National Standards RE |
English PDF |
| GB/T 21000.1-2007 |
Commercial REfrigerated cabinets - Methods of test - Part 1: General test conditions and temperature test 商用冷藏柜 试验方法 第1部分：通用试验条件及温度试验 |
China National Standards RE |
English PDF |
| GB/T 20432.9-2007 |
Photography - Photographic-grade chemicals - Test methods - Part 9： REaction to ammoniacal silver nitrate 摄影 照相级化学品 试验方法 第9部分：和硝酸银氨溶液的反应 |
China National Standards RE |
English PDF |
| GB/T 968-2007 |
Manufacturing tolerances on the thREaded of portion taps 丝锥螺纹公差 |
China National Standards RE |
English PDF |
| GB/T 6476-2007 |
Surface grinding machines with vertical grinding wheel spindle and REciprocating table - Testing of the accuracy 立轴矩台平面磨床 精度检验 |
China National Standards RE |
English PDF |
| GB/T 4681-2007 |
External cylindrical centREless grinding machines - Testing of the accuracy 无心外圆磨床 精度检验 |
China National Standards RE |
English PDF |
| GB/T 4022.1-2007 |
Surface grinding machines with horizontal grinding wheel spindle and REciprocating table - Testing of the accuracy - Part 1：Machines with a table surface length of up to 1600 mm 卧轴矩台平面磨床 精度检验 第1部分：工作台面长度至1600mm的机床 |
China National Standards RE |
English PDF |
| GB/T 21020-2007 |
Metal cutting tools - Terms in circular scREwing dies 金属切削刀具 圆板牙术语 |
China National Standards RE |
English PDF |
| GB/T 21018-2007 |
Metal cutting tools - Terms in REamers 金属切削刀具 铰刀术语 |
China National Standards RE |
English PDF |
| GB/T 21012-2007 |
PREcision machining centers - Specifications 精密加工中心 技术条件 |
China National Standards RE |
English PDF |
| GB/T 20957.4-2007 |
Test conditions for pREcision machining centres - Part 4：Accuracy and repeatability of positioning of linear and rotary axes 精密加工中心检验条件 第4部分：线性和回转轴线的定位精度和重复定位精度检验 |
China National Standards RE |
English PDF |
| GB/T 2075-2007 |
Classification and application of hard cutting materials for metal REmoval with defined cutting edges ― Designation of the main groups and groups of application 切削加工用硬切削材料的分类和用途 大组和用途小组的分类代号 |
China National Standards RE |
English PDF |
| GB/T 18400.9-2007 |
Test conditions for machining centREs - Part 9: Evaluation of the operating times of tool change and pallet change 加工中心检验条件 第9部分：刀具交换和托板交换操作时间的评定 |
China National Standards RE |
English PDF |
| GB/T 16462.4-2007 |
Test conditions for numerically controlled turning machines and turning centREs - Part 4: Accuracy and repeatability of positioning of linear and rotary axes 数控车床和车削中心检验条件 第4部分：线性和回转轴线的定位精度及重复定位精度检验 |
China National Standards RE |
English PDF |
| GB 20998-2007 |
Limits and measuREment methods for evaporative pollutants from motorcycles and mopeds 摩托车和轻便摩托车燃油蒸发污染物排放限值及测量方法 |
China National Standards RE |
English PDF |
| GB 13094-2007 |
The safety REquiements for bus construction 客车结构安全要求 |
China National Standards RE |
English PDF |
| GB 21011-2007 |
Mine manriding cars with narrow gauge - Safety REquirements 矿用人车 安全要求 |
China National Standards RE |
English PDF |
| GB 21009-2007 |
Mine blast-hole drills - Safety REquirements 矿用炮孔钻机 安全要求 |
China National Standards RE |
English PDF |
| GB 21008-2007 |
Aerial ropeways for underground mine - Safety REquirements 地下矿用架空索道 安全要求 |
China National Standards RE |
English PDF |
| GB/T 241-2007 |
Metal materials-Tube - Hydrostatic pREssure test 金属管 液压试验方法 |
China National Standards RE |
English PDF |
| GB/T 6300-2007 |
REgulations for submission of the ship’s finished documents 提交船舶产品完工文件的规定 |
China National Standards RE |
English PDF |
| GB/T 17843-2007 |
Ships and marine technology - DREdgers - Terms 船舶和海上技术 挖泥船 术语 |
China National Standards RE |
English PDF |
| GB/T 17383-2007 |
Ships and marine technology - DREdgers - Classification 船舶和海上技术 挖泥船 分类 |
China National Standards RE |
English PDF |
| GB/T 13342-2007 |
Specification for marine REciprocating hydraulic cylinder 船用往复式液压缸通用技术条件 |
China National Standards RE |
English PDF |
| GB/T 11144-2007 |
Standard test method for measuREment of extreme-perssure prosperties of lubricating fluids - Timken method 润滑液极压性能测定法 梯姆肯法 |
China National Standards RE |
English PDF |
| GB/T 4833.1-2007 |
Multichannel analyzers - Part 1: technical REquirements and test methods 多道分析器 第1部分：技术要求与试验方法 |
China National Standards RE |
English PDF |
| GB 9706.6-2007 |
Medical electrical equipment - Part 2：Particular REquirements for the safety of microwave therapy equipment 医用电气设备 第二部分：微波治疗设备安全专用要求 |
China National Standards RE |
English PDF |
| GB 9706.1-2007 |
Medical electrical equipment - Part 1:General REquirements for safety 医用电气设备 第1部分：安全通用要求 |
China National Standards RE |
English PDF |
| GB 10230.1-2007 |
Tap-changers - Part 1: Performance REquirements and test methods 分接开关 第1部分：性能要求和试验方法 |
China National Standards RE |
English PDF |
| GB/T 5332-2007 |
Method of test for ignition temperatuRE of flammable liquids and gases 可燃液体和气体引燃温度试验方法 |
China National Standards RE |
English PDF |
| GB/T 18294.4-2007 |
Technical identification method for fiRE - Part 4: High performance liquid chromatography analysis 火灾技术鉴定方法 第4部分：高效液相色谱法 |
China National Standards RE |
English PDF |
| GB/T 16172-2007 |
Test method for heat RElease rate of building materials 建筑材料热释放速率试验方法 |
China National Standards RE |
English PDF |
| GB/T 878-2007 |
Slotted headless scREws with shank 开槽无头螺钉 |
China National Standards RE |
English PDF |
| GB/T 80-2007 |
hexagon socket set scREws with cup point 内六角凹端紧定螺钉 |
China National Standards RE |
English PDF |
| GB/T 79-2007 |
Hexagon socket set scREws with dog point 内六角圆柱端紧定螺钉 |
China National Standards RE |
English PDF |
| GB/T 78-2007 |
Hexagon socket set scREws with cone point 内六角锥端紧定螺钉 |
China National Standards RE |
English PDF |
| GB/T 77-2007 |
Hexagon socket set scREws with flat point 内六角平端紧定螺钉 |
China National Standards RE |
English PDF |
| GB/T 2673-2007 |
hexalobular socket countersunk head scREws 内六角花形沉头螺钉 |
China National Standards RE |
English PDF |
| GB/T 20485.21-2007 |
Methods for the calibration of vibration and shock transducers - Part 21: Vibration calibration by comparison to a REference transducer 振动与冲击传感器校准方法 第21部分：振动比较法校准 |
China National Standards RE |
English PDF |
| GB/T 21028-2007 |
Information security technology - Security techniques REquirement for server 信息安全技术 服务器安全技术要求 |
China National Standards RE |
English PDF |
| GB/T 21039.1-2007 |
Semiconductor devices - DiscREte devices - Part 4-1: Microwave diodes and transistors - Microwave field effect transistors - Blank detail specification 半导体器件 分立器件 第4-1部分：微波二极管和晶体管 微波场效应晶体管空白详细规范 |
China National Standards RE |
English PDF |
| GB/T 21026-2007 |
Specification for Chinese office softwaRE application programming interface 中文办公软件应用编程接口规范 |
China National Standards RE |
English PDF |
| GB/T 21023-2007 |
General specification for Chinese speech REcognition system 中文语音识别系统通用技术规范 |
China National Standards RE |
English PDF |
| GB/T 21022.1-2007 |
FibRE optic connector interfaces - Part 1: General and guidance 纤维光学连接器接口 第1部分: 总则和导则 |
China National Standards RE |
English PDF |
| GB/T 21021-2007 |
RF connector,connector cable assemblies and cable - Intermodulation level measuREment 射频连接器、连接器电缆组件和电缆 互调电平测量 |
China National Standards RE |
English PDF |
| GB/T 18311.31-2007 |
FibRE optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-31: Examinations and measurements - Coupled power ratio measurement for fibre optic sources 纤维光学互连器件和无源器件 基本试验和测量程序 第3-31部分：检查和测量 纤维光学光源耦合功率比测量 |
China National Standards RE |
English PDF |
| GB/T 18311.30-2007 |
FibRE optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-30: Examinations and measurements - Polish angle and fibre position on single ferrule multifibre connectors 纤维光学互连器件和无源器件 基本试验和测量程序 第3-30部分：检查和测量 单套管多芯光纤连接器抛光角度和光纤位置 |
China National Standards RE |
English PDF |
| GB/T 18311.28-2007 |
FibRE optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss 纤维光学互连器件和无源器件 基本试验和测量程序 第3-28部分: 检查和测量 瞬间损耗 |
China National Standards RE |
English PDF |
| GB/T 18311.26-2007 |
FibRE optic interconnecting devices and passive components - Basic test and measurement procedures Part 3-26: Examinations and measurements - Measurement of the angular misalignment between fibre and ferrule axes 纤维光学互连器件和无源器件 基本试验和测量程序 第3-26部分：检查和测量 光纤和插针轴线间的角偏差的测量 |
China National Standards RE |
English PDF |
| GB/T 18311.20-2007 |
FibRE optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices 纤维光学互连器件和无源器件 基本试验和测量程序 第3-20部分：检查和测量 纤维光学分路器件的方向性 |
China National Standards RE |
English PDF |
| GB/T 18311.16-2007 |
FibRE optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules 纤维光学互连器件和无源器件 基本试验和测量程序 第3-16部分：检查和测量 球面抛光套管端面半径 |
China National Standards RE |
English PDF |
| GB/T 18310.48-2007 |
FibRE optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling 纤维光学互连器件和无源器件 基本试验和测量程序 第2-48部分：试验 温度湿度循环 |
China National Standards RE |
English PDF |
| GB/T 15160-2007 |
Land mobile communication system REquirements using multi-channel access techniques without a central controller 无中心多信道选址移动通信系统体制 |
China National Standards RE |
English PDF |
| GB/T 15157.14-2007 |
Connectors for fREquencies below 3 MHz for use with printed boards - Part 14: Detail specification for circular connectors for low-frequency audio and video applications such as audio, video and audio-visual equipment 频率低于3MHz的印制板连接器 第14部分: 音频、视频和音像设备用低音频及视频圆形连接器详细规范 |
China National Standards RE |
English PDF |
| GB/T 14805.4-2007 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax RElease number:1) - Part 4: Syntax and service report message for batch EDI (Message type_CONTRL） 行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第4部分: 批式电子数据交换语法和服务报告报文(报文类型为CONTRL) |
China National Standards RE |
English PDF |
| GB/T 14805.3-2007 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax RElease number:1) - Part 3: Syntax rules specific to interactive EDI 行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第3部分: 交互式电子数据交换专用的语法规则 |
China National Standards RE |
English PDF |
| GB/T 14805.2-2007 |
Electronic data interchange for administration, commerce and transport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax RElease number:1) - Part 2: Syntax rules specific to batch EDI 行政、商业和运输业电子数据交换（EDIFACT) 应用级语法规则(语法版本号:4，语法发布号:1) 第2部分: 批式电子数据交换专用的语法规则 |
China National Standards RE |
English PDF |
| GB/T 14805.1-2007 |
Electronic data interchange for administration,commerce andtransport (EDIFACT) - Application level syntax rules (Syntax version number: 4，Syntax RElease number:1) - Part 1: Syntax rules common to all parts 行政、商业和运输业电子数据交换(EDIFACT) 应用级语法规则(语法版本号: 4，语法发布号:1) 第1部分：公用的语法规则 |
China National Standards RE |
English PDF |
| GB/T 11313.4-2007 |
Radio-fREquency connecters. - Part 4: R.F.coaxial connectors with inner diameter of outer conductor 16mm(0.63in) with screw lock - Characteristic impedance 50 ohms (Type 7-16) 射频连接器 第4部分：外导体内径为16mm(0.63in)、特性阻抗为50Ω、螺纹连接的射频同轴连接器(7-16型) |
China National Standards RE |
English PDF |
| GB/T 11313.2-2007 |
Radio-fREquency connectors - Part 2: Sectional specification - Radio frequency coaxial connectors for type 9.52 射频连接器 第2部分: 9.52型射频同轴连接器分规范 |
China National Standards RE |
English PDF |
| GB/T 20969.2-2007 |
Special environmental condition - Machinery for plateau - Part 2: REquirements for construction machinery on plateau 特殊环境条件 高原机械 第2部分：高原对工程机械的要求 |
China National Standards RE |
English PDF |
| GB/T 20969.1-2007 |
Special environmental condition - Machinery for plateau - Part 1: REquirements for internal combustion engines on plateau 特殊环境条件 高原机械 第1部分：高原对内燃动力机械的要求 |
China National Standards RE |
English PDF |
| GB/T 16556-2007 |
self-contained open-circuit compREssed air breathing apparatus 自给开路式压缩空气呼吸器 |
China National Standards RE |
English PDF |
| GB 7059-2007 |
Safety REquirements for portable wood ladders 便携式木折梯安全要求 |
China National Standards RE |
English PDF |
| GB 15577-2007 |
Safety REgulations for dust explosion prevention and protection 粉尘防爆安全规程 |
China National Standards RE |
English PDF |
| GB 12142-2007 |
safety REquirements for portable metal ladders 便携式金属梯安全要求 |
China National Standards RE |
English PDF |
| GB 21047-2007 |
REd Drum 眼斑拟石首鱼 |
China National Standards RE |
English PDF |
| GB/T 8243.12-2007 |
Methods of test for full-flow lubricating oil filters for internal combustion engines - Part 12: Filtration efficiency using particle counting, and contaminant REtention capacity 内燃机全流式机油滤清器试验方法 第12部分：采用颗粒计数法测定滤清效率和容灰量 |
China National Standards RE |
English PDF |
| GB/T 7927-2007 |
Method of vibration measuREment for walking tractors 手扶拖拉机 振动测量方法 |
China National Standards RE |
English PDF |
| GB/T 6809.4-2007 |
REciprocating internal combustion engines - Vocabulary of components and systems - Part 4: Pressure charging and air/exhaust gas ducting systems 往复式内燃机 零部件和系统术语 第4部分：增压及进排气管系统 |
China National Standards RE |
English PDF |
| GB/T 6138.2-2007 |
Subland twist drills for holes prior to tapping scREw threads - Part 2: The types and dimensions of Subland twist drills with Morse typer shanks 攻丝前钻孔用阶梯麻花钻 第2部分：莫氏锥柄阶梯麻花钻的型式和尺寸 |
China National Standards RE |
English PDF |
| GB/T 6138.1-2007 |
Subland twist drills for holes prior to tapping scREw threads - Part 1: The types and dimensions of subland twist drills with cylindrical shanks 攻丝前钻孔用阶梯麻花钻 第1部分：直柄阶梯麻花钻的型式和尺寸 |
China National Standards RE |
English PDF |
| GB/T 4127.9-2007 |
Bonded abrasive products - Dimensions - Part 9: Grinding wheels for high-pREssure grinding 固结磨具 尺寸 第9部分：重负荷磨削砂轮 |
China National Standards RE |
English PDF |
| GB/T 4127.2-2007 |
Bonded abrasive products - Dimensions - Part 2: Grinding wheels for centREless external cylindrical grinding 固结磨具 尺寸 第2部分：无心外圆磨砂轮 |
China National Standards RE |
English PDF |
| GB/T 4127.1-2007 |
Bonded abrasive products - Dimensions - Part 1: Grinding wheels for external cylindrical grinding between centREs 固结磨具 尺寸 第1部分：外圆磨砂轮（工件装夹在顶尖间） |
China National Standards RE |
English PDF |
| GB/T 2490-2007 |
Bonded abrasive products - Hardness grade measuREment 固结磨具 硬度检验 |
China National Standards RE |
English PDF |
| GB/T 20972.1-2007 |
Petroleum and natural gas industries - Material for use in H2S - containing environments in oil and gas production - part 1: General principles for selection of cracking-REsistant materials 石油天然气工业 油气开采中用于含硫化氢环境的材料 第1部分：选择抗裂纹材料的一般原则 |
China National Standards RE |
English PDF |
| GB/T 20963-2007 |
Coated abrasives - Vulcanized fibRE discs 涂附磨具 钢纸砂盘 |
China National Standards RE |
English PDF |
| GB/T 20960-2007 |
NC horizontal turREt 数控卧式转塔刀架 |
China National Standards RE |
English PDF |
| GB/T 20959-2007 |
NC vertical turREt 数控立式转塔刀架 |
China National Standards RE |
English PDF |
| Find out:25312Items | To Page of: First -Previous-Next -Last | [197] [198] [199] [200] [201] [202] [203] |
+86-755-25831330
