GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
Standard Code | Standard Title | Standard Class | Order |
---|---|---|---|
GB 16895.5-2012 |
Low-voltage electrical installations - Part 4-43: Protection for safety - Protection against overcurRent 低压电气装置 第4-43部分:安全防护 过电流保护 |
China National Standards Re |
English PDF |
GB 16895.27-2012 |
Low-voltage electrical installations - Part 7-705: Requirements for special installations or locations - Agricultural and horticultural premises 低压电气装置 第7-705部分:特殊装置或场所的要求 农业和园艺设施 |
China National Standards Re |
English PDF |
GB 16895.13-2012 |
Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower 低压电气装置 第7-701部分:特殊装置或场所的要求 装有浴盆和淋浴的场所 |
China National Standards Re |
English PDF |
GB 10810.5-2012 |
Uncut finished spectacle lenses - Part 5: Requirements of abrasion-resistant for spectacle lens surfaces 眼镜镜片 第5部分: 镜片表面耐磨要求 |
China National Standards Re |
English PDF |
GB 28440-2012 |
Voice communication network management platform for fiRefighting command center 消防话音通信组网管理平台 |
China National Standards Re |
English PDF |
GB 13614-2012 |
Electromagnetic environment Requirements for-Short-wave radio receiving and direction finding stations 短波无线电收信台(站)及测向台(站)电磁环境要求 |
China National Standards Re |
English PDF |
GB/T 28416-2012 |
Corrosion tests in artificial atmospheRes - Accelerated corrosion tests involving alternate exposure to corrosion-promoting gases, neutral salt-spray and drying 人工大气中的腐蚀试验 交替暴露在腐蚀性气体、中性盐雾及干燥环境中的加速腐蚀试验 |
China National Standards Re |
English PDF |
GB/T 28415-2012 |
FiRe-resistant structural steel plate and strip 耐火结构用钢板及钢带 |
China National Standards Re |
English PDF |
GB/T 28414-2012 |
Structural section steels with improved seismie Resistance 抗震结构用型钢 |
China National Standards Re |
English PDF |
GB/T 28408-2012 |
Protective clothing - Repellent shield clothing 防护服装 防虫防护服 |
China National Standards Re |
English PDF |
GB/T 24513.3-2012 |
Corrosion of metals and alloys - Classification of low corrosivity of indoor atmospheRes - Part 3: Measurement of environmental parameters affecting indoor corrosivity 金属和合金的腐蚀 室内大气低腐蚀性分类 第3部分:影响室内大气腐蚀性的环境参数测定 |
China National Standards Re |
English PDF |
GB/T 2039-2012 |
Metallic materials - Uniaxial cReep testing method in tension 金属材料 单轴拉伸蠕变试验方法 |
China National Standards Re |
English PDF |
GB/T 17397-2012 |
Regulations for dust and poison control of aluminium electrowinning 铝电解生产防尘防毒技术规程 |
China National Standards Re |
English PDF |
GB/T 18916.6-2012 |
Norm of water intake - Part 6: Beer bRewing industry 取水定额 第6部分:啤酒制造 |
China National Standards Re |
English PDF |
GB/T 18916.3-2012 |
Norm of water intake - Part 3: Petroleum Refining 取水定额 第3部分:石油炼制 |
China National Standards Re |
English PDF |
GB/T 18916.1-2012 |
Norm of water intake - Part 1: Fossil fiRed power production 取水定额 第1部分:火力发电 |
China National Standards Re |
English PDF |
GB/T 9292-2012 |
Surface active agents method of testing of the migration action of levelling agents for disperse dyes on dyeing polyester textiles under high temperatuRe condition 表面活性剂 高温条件下分散染料染聚酯织物用匀染剂的移染性测试法 |
China National Standards Re |
English PDF |
GB/T 4465-2012 |
Basic dyes - Determination of shade and Relative strength 碱性染料 色光和强度的测定 |
China National Standards Re |
English PDF |
GB/T 28620-2012 |
The calculating methods of Remanufacturing rate 再制造率的计算方法 |
China National Standards Re |
English PDF |
GB/T 28619-2012 |
Remanufacturing - Terminology 再制造 术语 |
China National Standards Re |
English PDF |
GB/T 28618-2012 |
Remanufacturing - General technical requirements for mechanical products 机械产品再制造 通用技术要求 |
China National Standards Re |
English PDF |
GB/T 28617-2012 |
General guidance for gReen manufacturing technology - Foundry section 绿色制造通用技术导则 铸造 |
China National Standards Re |
English PDF |
GB/T 28616-2012 |
GReen manufacturing attributes of mechanical products 绿色制造属性 机械产品 |
China National Standards Re |
English PDF |
GB/T 28615-2012 |
GReen manufacturing - The technology specification for metal-cutting machine tool remanufacturing 绿色制造 金属切削机床再制造技术导则 |
China National Standards Re |
English PDF |
GB/T 28614-2012 |
GReen manufacturing - The general technique guideline for dry cutting 绿色制造 干式切削 通用技术指南 |
China National Standards Re |
English PDF |
GB/T 28613-2012 |
Guideline for gReen manufacturing process planning of mechanical products 机械产品绿色制造工艺规划 导则 |
China National Standards Re |
English PDF |
GB/T 28612-2012 |
Terminology of gReen manufacturing of mechanical products 机械产品绿色制造 术语 |
China National Standards Re |
English PDF |
GB/T 28609-2012 |
Optical functional films - Polyethylene teRephthalate(PET)-Determination of birefringence 光学功能薄膜 聚对苯二甲酸乙二醇酯(PET)薄膜 双折射测定方法 |
China National Standards Re |
English PDF |
GB/T 28603-2012 |
Production technical Regulation for Anhydrous hydrogen fluoride 无水氟化氢生产技术规范 |
China National Standards Re |
English PDF |
GB/T 28602-2012 |
Production technical Regulation for furnace-process phosphoric acid 磷酸(热法)生产技术规范 |
China National Standards Re |
English PDF |
GB/T 28601-2012 |
Rubber compounding ingRedients - Silica,precipitated,hydrated - Determination of gelatin content 橡胶配合剂 沉淀水合二氧化硅 凝胶含量的测定 |
China National Standards Re |
English PDF |
GB/T 28600-2012 |
Rubber compounding ingRedients - Silica, precipitated, hydrated -Determination of average pore diameter 橡胶配合剂 沉淀水合二氧化硅 平均孔径的测定 |
China National Standards Re |
English PDF |
GB/T 28468-2012 |
Traffic safety uniforms with Reflective fabrics for primary and secondary students in schools 中小学生交通安全反光校服 |
China National Standards Re |
English PDF |
GB/T 28467-2012 |
Color card of polyester embroidery thReads 涤纶绣花线色卡 |
China National Standards Re |
English PDF |
GB/T 28466-2012 |
Polyester filament embroidery thReads 涤纶长丝绣花线 |
China National Standards Re |
English PDF |
GB/T 28461-2012 |
Carbon fiber pRepreg 碳纤维预浸料 |
China National Standards Re |
English PDF |
GB/T 2378-2012 |
Acid dyes - Determination of dyeing shade and Relative strength 酸性染料 染色色光和强度的测定 |
China National Standards Re |
English PDF |
GB/T 19089-2012 |
Rubber-or plastics-coated fabrics - Determination of abrasion Resistance - Martindale method 橡胶或塑料涂覆织物 耐磨性的测定 马丁代尔法 |
China National Standards Re |
English PDF |
GB/T 1866-2012 |
Neutral dyes - Determination of dyeing shade and Relative strength 中性染料 染色色光和强度的测定 |
China National Standards Re |
English PDF |
GB/T 15338-2012 |
Carbon black - Validation of test method pRecision and bias 炭黑 试验方法精密度和偏差的确认 |
China National Standards Re |
English PDF |
GB/T 13025.3-2012 |
General test method in salt industry - Determination of moistuRe 制盐工业通用试验方法 水分的测定 |
China National Standards Re |
English PDF |
GB 21976.5-2012 |
Escape apparatus for building fiRe - Part 5:Escape device 建筑火灾逃生避难器材 第5部分:应急逃生器 |
China National Standards Re |
English PDF |
GB 21976.4-2012 |
Escape apparatus for building fiRe - Part 4: Escape slide 建筑火灾逃生避难器材 第4部分:逃生滑道 |
China National Standards Re |
English PDF |
GB/T 5201-2012 |
Test proceduRes for semiconductor charged particle detectors 带电粒子半导体探测器测量方法 |
China National Standards Re |
English PDF |
GB/T 28575-2012 |
Specification for YE3 Series(IP55)super-high efficiency thRee-phase induction motor(Frame size 80~355) YE3系列(IP55)超高效率三相异步电动机技术条件(机座号80~355) |
China National Standards Re |
English PDF |
GB/T 28568-2012 |
Cabinets for electrotechnical and electronic equipment - Safety design Requirements 电工电子设备机柜 安全设计要求 |
China National Standards Re |
English PDF |
GB/T 28567-2012 |
Specifications for electric wiRe and cable of special equipment 电线电缆专用设备技术要求 |
China National Standards Re |
English PDF |
GB/T 28565-2012 |
High-voltage alternating-curRent series capacitor by-pass switches 高压交流串联电容器用旁路开关 |
China National Standards Re |
English PDF |
GB/T 28564-2012 |
Cabinets for electrotechnical and electronic equipment - Modular design Requirements 电工电子设备机柜 模数化设计要求 |
China National Standards Re |
English PDF |
GB/T 28563-2012 |
Electrical testing of thyristor valves for ±800kV ultra high voltage diRect current (UHVDC) power transmission ±800kV特高压直流输电用晶闸管阀电气试验 |
China National Standards Re |
English PDF |
GB/T 28562-2012 |
Specification for YVF series variable fRequency high voltage three-phase induction motors (Frame size 355-630) YVF系列变频调速高压三相异步电动机技术条件(机座号355~630) |
China National Standards Re |
English PDF |
GB/T 28561-2012 |
Electrical installations in ships - Special featuRes - Control and instrumentation 船舶电气设备 专辑 控制和测量仪表 |
China National Standards Re |
English PDF |
GB/T 28557-2012 |
Regulating evaluation of index on energy saving main parameter for electricity enterprise 电力企业节能降耗主要指标的监管评价 |
China National Standards Re |
English PDF |
GB/T 28556-2012 |
Flameproof and intrinsically safe controller with fRequency converter for coalmine ventilation fan 煤矿通风机用隔爆兼本质安全型变频调速控制器 |
China National Standards Re |
English PDF |
GB/T 28555-2012 |
Technical Requirements of treatment facilities for waste electrical and electronic products - Treatment facilities for refrigeration equipment and cathode ray tube (CRT) monitors 废电器电子产品回收处理设备技术要求 制冷器具与阴极射线管显示设备回收处理设备 |
China National Standards Re |
English PDF |
GB/T 28550-2012 |
Piping verification Requirement during nuclear power plant commissioning 核电厂调试阶段管道验证要求 |
China National Standards Re |
English PDF |
GB/T 28549-2012 |
Verification Requirement of supports in nuclear island during nuclear power plant commissioning 核电厂调试阶段核岛管道与主设备支吊装置验证要求 |
China National Standards Re |
English PDF |
GB/T 28547-2012 |
Selection and application Recommendations of metal oxide surge arresters for a.c. systems 交流金属氧化物避雷器选择和使用导则 |
China National Standards Re |
English PDF |
GB/T 28545-2012 |
Hydraulic turbines, storage pumps and pump-turbines - Guideline for Rehabilitation and performance improvement 水轮机、蓄能泵和水泵水轮机更新改造和性能改善导则 |
China National Standards Re |
English PDF |
GB/T 28544-2012 |
MeasuRement methods of light output and intrinsic resolution for housed scintillators 封装闪烁体光输出和固有分辨率的测量方法 |
China National Standards Re |
English PDF |
GB/T 28543-2012 |
Noise measuRement of power capacitors 电力电容器噪声测量方法 |
China National Standards Re |
English PDF |
GB/T 28541-2012 |
Insulation co-ordination for equipments of ±800kV high voltage diRect current converter stations ±800kV高压直流换流站设备的绝缘配合 |
China National Standards Re |
English PDF |
GB/T 28539-2012 |
Ophthalmic optics - Contact lenses and contact lens caRe products - Guidelines for determination of preservative uptake and release 眼科光学 接触镜和接触镜护理产品 防腐剂的摄入和释放的测定指南 |
China National Standards Re |
English PDF |
GB/T 28538-2012 |
Ophthalmic optics?Contact lenses and contact lenses caRe products - Determination of biocompatibility by ocular study with rabbit eyes 眼科光学 接触镜和接触镜护理产品 兔眼相容性研究试验 |
China National Standards Re |
English PDF |
GB/T 28534-2012 |
The health and environmental impact on Release of sulphur hexafluoride (SF6) used in high-voltage switchgear and controlgear 高压开关设备和控制设备中六氟化硫(SF6)气体的释放对环境和健康的影响 |
China National Standards Re |
English PDF |
GB/T 28533.1-2012 |
Coupling connector for use in explosive gas atmospheRes - Part 1: Type of protection “n” coupling connector 爆炸性气体环境用电气耦合连接器 第1部分:“n”型耦合连接器 |
China National Standards Re |
English PDF |
GB/T 28492-2012 |
Button general technical Requirements and methods - Copper button 钮扣通用技术要求和检测方法 铜质类 |
China National Standards Re |
English PDF |
GB/T 28491-2012 |
Button general technical Requirements and testing methods - Natural shell button 钮扣通用技术要求和检测方法 天然贝壳类 |
China National Standards Re |
English PDF |
GB/T 28487-2012 |
PRecious metal alloys chains - Determination of tensile strength - Method of tensile testing 贵金属及其合金链 抗拉强度的测定 拉伸试验法 |
China National Standards Re |
English PDF |
GB/T 28486-2012 |
Determination of dimethyl fumarate in mildew pReventives 防霉剂中富马酸二甲酯含量的测定 |
China National Standards Re |
English PDF |
GB/T 28485-2012 |
Coated adornment - Detection of nickel Release - Method for simulation of wear and corrosion 镀层饰品 镍释放量的测定 磨损和腐蚀模拟法 |
China National Standards Re |
English PDF |
GB/T 28484-2012 |
General specification for compRession and expansion equipment of electrophones 电鸣乐器压缩与扩展类音效装置通用技术条件 |
China National Standards Re |
English PDF |
GB/T 28483-2012 |
Environmentally friendly rubber latex for carpet application--Carboxylated styRene-butadiene rubber latex and limitation of hazardous substances 地毯用环保胶乳 羧基丁苯胶乳及有害物质限量 |
China National Standards Re |
English PDF |
GB/T 28474.2-2012 |
PRessure/Differential-pressure transmitters for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance 工业过程测量和控制系统用压力/差压变送器 第2部分:性能评定方法 |
China National Standards Re |
English PDF |
GB/T 28474.1-2012 |
PRessure/Differential-pressure transmitters for use in industrial-process measure and control systems - Part 1: General specification 工业过程测量和控制系统用压力/差压变送器 第1部分:通用技术条件 |
China National Standards Re |
English PDF |
GB/T 28473.2-2012 |
TemperatuRe transmitters for use in industrial-process measure and control systems - Part 2: Methods of evaluating the performance 工业过程测量和控制系统用温度变送器 第2部分:性能评定方法 |
China National Standards Re |
English PDF |
GB/T 28473.1-2012 |
TemperatuRe transmitters for use in industrial-process measure and control systems - Part 1: General specification 工业过程测量和控制系统用温度变送器 第1部分:通用技术条件 |
China National Standards Re |
English PDF |
GB/T 28472.2-2012 |
Distributor for use in industrial-process measuRe and control systems - Part 2: Methods of evaluating the performance 工业过程测量和控制系统用配电器 第2部分:性能评定方法 |
China National Standards Re |
English PDF |
GB/T 28472.1-2012 |
Distributor for use in industrial-process measuRe and control systems - Part 1: General technical specification 工业过程测量和控制系统用配电器 第1部分:通用技术条件 |
China National Standards Re |
English PDF |
GB/T 28471.2-2012 |
Safety barrier for use in industrial-process measuRe and control systems - Part 2: Methods of evaluating the performance 工业过程测量和控制系统用隔离式安全栅 第2部分:性能评定方法 |
China National Standards Re |
English PDF |
GB/T 28471.1-2012 |
Safety barrier for use in industrial-process measuRe and control systems - Part 1: General technical specification 工业过程测量和控制系统用隔离式安全栅 第1部分:通用技术条件 |
China National Standards Re |
English PDF |
GB/T 28470-2012 |
Methods of evaluating the performance of electrical and pneumatic analogue computing unit for use in industrial process measuRement and control systems 工业过程测量和控制系统用电动和气动模拟计算器性能评定方法 |
China National Standards Re |
English PDF |
GB/T 28419-2012 |
Guide of Remote sensing monitoring for sandstorm source 风沙源区草原沙化遥感监测技术导则 |
China National Standards Re |
English PDF |
GB/T 28418-2012 |
Fundamental technical Requirements for soil moisture-monitoring instruments 土壤水分(墒情)监测仪器基本技术条件 |
China National Standards Re |
English PDF |
GB/T 26155.2-2012 |
Intelligent electrical actuators for industrial-process measuRement and control systems - Part 2:Methods of evaluating the performance 工业过程测量和控制系统用智能电动执行机构 第2部分:性能评定方法 |
China National Standards Re |
English PDF |
GB/T 19769.3-2012 |
Function block for industrial-process measuRement and control systems - Part 3:Tutorial information 工业过程测量和控制系统用功能块 第3部分:指导信息 |
China National Standards Re |
English PDF |
GB/T 14598.18-2012 |
Measuring Relays and protection equipment - Part 22-5: Electrical disturbance tests - Surge immunity test 量度继电器和保护装置 第22-5部分:电气骚扰试验 浪涌抗扰度试验 |
China National Standards Re |
English PDF |
GB/T 14598.10-2012 |
Measuring Relays and protection equipment - Part 22-4: Electrical disturbance tests - Electrical fast transient/burst immunity test 量度继电器和保护装置 第22-4部分:电气骚扰试验 电快速瞬变/脉冲群抗扰度试验 |
China National Standards Re |
English PDF |
GB/T 14478-2012 |
Fundamental technical Requirements for large and medium inlet valves of hydraulic turbine 大中型水轮机进水阀门基本技术条件 |
China National Standards Re |
English PDF |
GB/T 14055.2-2012 |
Reference neutron radiations - Part 2: Calibration fundamentals of radiation protection devices related to the basic quantities characterizing the radiation field 中子参考辐射 第2部分:与表征辐射场基本量相关的辐射防护仪表校准基础 |
China National Standards Re |
English PDF |
GB/T 12310-2012 |
Sensory analysis method - PaiRed comparison test 感官分析方法 成对比较检验 |
China National Standards Re |
English PDF |
GB/T 1032-2012 |
Test proceduRes for three-phase induction motors 三相异步电动机试验方法 |
China National Standards Re |
English PDF |
GB 28595-2012 |
Elimination of the endemic arsenism aReas 地方性砷中毒病区消除 |
China National Standards Re |
English PDF |
GB/T 7424.5-2012 |
Optical fibRe cables - Part 5: Sectional specification - Micro-duct optical fibre cables and fibre units for installation by blowing 光缆 第5部分:分规范 用于气吹安装的微型光缆和光纤单元 |
China National Standards Re |
English PDF |
GB/T 9771.7-2012 |
Single-mode optical fibRes for telecommunication - Part 7: Characteristics of a bending loss insensitive single-mode optical fibre for the access network 通信用单模光纤 第7部分:接入网用弯曲损耗不敏感单模光纤特性 |
China National Standards Re |
English PDF |
GB/T 28589-2012 |
GeogReaphic information - Positioning services 地理信息 定位服务 |
China National Standards Re |
English PDF |
GB/T 28588-2012 |
Specifications for the continuously operating Reference station using global navigation satellite system 全球导航卫星系统连续运行基准站网技术规范 |
China National Standards Re |
English PDF |
GB/T 28587-2012 |
Inertial measuRement unit in the mobile mapping system 移动测量系统惯性测量单元 |
China National Standards Re |
English PDF |
GB/T 28585-2012 |
Geographic information - Methodology for featuRe cataloguing 地理信息 要素编目方法 |
China National Standards Re |
English PDF |
GB/T 28582-2012 |
ExpRess waybill 快递运单 |
China National Standards Re |
English PDF |
Find out:25312Items | To Page of: First -Previous-Next -Last | [130] [131] [132] [133] [134] [135] [136] |