Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 11455-1989 |
HeaRing aid equipment not entirely wornon the listener 不完全佩戴在听者身上的助听设备 |
China National Standards Ring |
 English PDF |
| GB/T 11453-1989 |
Methods of measurement of performance characteristics of heaRing aids under simulated in situ working conditions 模拟实际工作条件下的助听器性能测量方法 |
China National Standards Ring |
English PDF |
| GB/T 11450.1-1989 |
Hollow metallic waveguides--Part 1:General requirement and measuRing methods 空心金属波导 第一部分:一般要求和测量方法 |
China National Standards Ring |
English PDF |
| GB/T 11167-1989 |
Direct acting electrical measuRing recorders 直接动作电测量记录仪 |
China National Standards Ring |
English PDF |
| GB/T 7631.4-1989 |
Lubricants and related products (class L)--Classification--Part 4:Family F (SpindlebeaRings，bearings and associated clutches) 润滑剂和有关产品(L类)的分类 第4 部分:F组 (主轴、轴承和有关离合器) |
China National Standards Ring |
English PDF |
| GB/T 11463-1989 |
Reliability test for electronic measuRing instruments 电子测量仪器可靠性试验 |
China National Standards Ring |
English PDF |
| GB/T 11297.6-1989 |
Standard method for showing andmeasuRing dislocation etch pits in indium antimonide single crystal 锑化铟单晶位错蚀坑的腐蚀显示及测量方法 |
China National Standards Ring |
English PDF |
| GB/T 11297.2-1989 |
Test method for side direction scatteRingcoefficient of laser rods 激光棒侧向散射系数的测量方法 |
China National Standards Ring |
English PDF |
| GB/T 11186.3-1989 |
Methods for measuRing the colourof paint films--Part 3:Calculation of colour differences 涂膜颜色的测量方法 第三部分:色差计算 |
China National Standards Ring |
English PDF |
| GB/T 11186.2-1989 |
Methods for measuRing the colourof paint films--Part 2:Colour measurement 涂膜颜色的测量方法 第二部分:颜色测量 |
China National Standards Ring |
English PDF |
| GB/T 11186.1-1989 |
Methods for measuRing the colour of paint films--Part 1:Principles 涂膜颜色的测量方法 第一部分:原理 |
China National Standards Ring |
English PDF |
| GB 11217-1989 |
The regulations for monitoRing effluents atnuclear facilities 核设施流出物监测的一般规定 |
China National Standards Ring |
English PDF |
| GB 11216-1989 |
General requirements of quality assurance program for effluent and environmental radioactivity monitoRing at nuclear facilities 核设施流出物和环境放射性监测质量保证计划的一般要求 |
China National Standards Ring |
English PDF |
| GB/T 10558-1989 |
Method for measuRing the root-mean-square (RMS) granularity of photographic materials/process combination 感光材料均方根颗粒度测定方法 |
China National Standards Ring |
English PDF |
| GB/T 10445-1989 |
Plain beaRings--Shaft diameters for unsplit bushes 滑动轴承 整体轴套的轴径 |
China National Standards Ring |
English PDF |
| GB/T 10262-1988 |
Beta backscatteRing thicknessmeter for small area of plating (coating) 小面积镀(涂)层β反散射厚度计 |
China National Standards Ring |
English PDF |
| GB/T 9635-1988 |
MeasuRing methods for aerial rods 天线棒测量方法 |
China National Standards Ring |
English PDF |
| GB/T 9602-1988 |
MeasuRing methods of electrical properties of continuous wave magnetrons 连续波磁控管电性能测试方法 |
China National Standards Ring |
English PDF |
| GB/T 9151-1988 |
Terms of drilling engineeRing 钻探工程名词术语 |
China National Standards Ring |
English PDF |
| GB/T 9068-1988 |
Determination of sound power levels for noise emitted by heating，ventilating and air conditioning equipments--EngineeRing method 采暖通风与空气调节设备噪声声功率级的测定 工程法 |
China National Standards Ring |
English PDF |
| GB/T 9074.8-1988 |
Cross recessed small pan headscrew，single coil spRing lock washer and plain washer assemblies 十字槽小盘头螺钉和弹簧垫圈及平垫圈组合件 |
China National Standards Ring |
English PDF |
| GB/T 9074.7-1988 |
Cross recessed small pan head screw and single coil spRing lock washer assemblies 十字槽小盘头螺钉和弹簧垫圈组合件 |
China National Standards Ring |
English PDF |
| GB/T 9074.4-1988 |
Cross recessed pan head screw，single coil spRing lock washer and plain washer assemblies 十字槽盘头螺钉，弹簧垫圈和平垫圈组合件 |
China National Standards Ring |
English PDF |
| GB/T 9074.3-1988 |
Cross recessed pan head screw and single coil spRing lock washer assemblies 十字槽盘头螺钉和弹簧垫圈组合件 |
China National Standards Ring |
English PDF |
| GB/T 9074.26-1988 |
Single coil spRing lock washer for assembly 组合件用弹簧垫圈 |
China National Standards Ring |
English PDF |
| GB/T 9074.17-1988 |
Hexagon head bolt，single coil spRing lock washer and plain washer assemblies 六角头螺栓， 弹簧垫圈和平垫圈组合件 |
China National Standards Ring |
English PDF |
| GB/T 9074.15-1988 |
Hexagon head bolt and single coil spRing lock washer assemblies 六角头螺栓和弹簧垫圈组合件 |
China National Standards Ring |
English PDF |
| GB/T 9074.12-1988 |
Cross recessed hexagon bolt with indentation and single coil spRing lock washer assemblies 十字槽凹穴六角头螺栓和弹簧垫圈组合件 |
China National Standards Ring |
English PDF |
| GB 8999-1988 |
General rule of quality assurance for ionizing radiation monitoRing 电离辐射监测质量保证一般规定 |
China National Standards Ring |
English PDF |
| GB/T 8763-1988 |
Test methods of gas absorption characteristic for non-evaporation getteRing materials and products 非蒸散型吸气材料及制品吸气性能测试方法 |
China National Standards Ring |
English PDF |
| GB/T 8617.3-1988 |
Technical parameters and measuRing methods for FM broadcasting coder--Two programs 调频广播编码器技术参数和测量方法 双节目 |
China National Standards Ring |
English PDF |
| GB/T 8617.2-1988 |
Technical parameters and measuRing methods for FM broadcasting coder--Supplementary channel 调频广播编码器技术参数和测量方法 附加声道 |
China National Standards Ring |
English PDF |
| GB/T 8617.1-1988 |
Technical parameters and measuRing methods for FM broadcasting coder--Stereophonic 调频广播编码器技术参数和测量方法 立体声 |
China National Standards Ring |
English PDF |
| GBJ 124-1988 |
Standard for terms used in road engineeRing 道路工程术语标准 |
China National Standards Ring |
English PDF |
| GB/T 8542-1987 |
Spcification for turbine geaRings 透平齿轮传动装置技术条件 |
China National Standards Ring |
English PDF |
| GB/T 8242.2-1987 |
Terminology for hull equipment--AnchoRing and mooring equipment 船体设备术语 系船设备 |
China National Standards Ring |
English PDF |
| GB/T 8223-1987 |
Value engineeRing--General terms and work program 价值工程 基本术语和一般工作程序 |
China National Standards Ring |
English PDF |
| GB/T 7948-1987 |
Test method for PV limit of plastics beaRings 塑料轴承极限PV试验方法 |
China National Standards Ring |
English PDF |
| GB/T 7623-1987 |
Automatic answeRing equipment and/or parallel automatic calling equipment on the general switched telephone network， including procedures for bling of echo control devices for both manually and automatically established calls 在电话自动交换网上的自动应答设备和(或)并行自动呼叫设备， 包括人工和自动建立呼叫时使回波控制装置停止工作的规程 |
China National Standards Ring |
English PDF |
| GB/T 7583-1987 |
Acoustics--Pure tone air conductionthreshold audio-metry--For heaRing conservation purposes 声学 纯音气导听阈测定 听力保护用 |
China National Standards Ring |
English PDF |
| GB/T 4312.3-1987 |
Technical parameters and measuRing methods for FM broadcasting transmitters of dual programmes 调频广播发射机技术参数和测量方法 双节目 |
China National Standards Ring |
English PDF |
| GB/T 955-1987 |
Wave spRing washers 波形弹性垫圈 |
China National Standards Ring |
English PDF |
| GB/T 93-1987 |
Single coil spRing lock washers--Normal type 标准型弹簧垫圈 |
China National Standards Ring |
English PDF |
| GB/T 860-1987 |
Curved spRing washers 鞍形弹性垫圈 |
China National Standards Ring |
English PDF |
| GB/T 859-1987 |
Single coil spRing lock washers，Light type 轻型弹簧垫圈 |
China National Standards Ring |
English PDF |
| GB/T 7246-1987 |
Wave single coil spRing lock washers 波形弹簧垫圈 |
China National Standards Ring |
English PDF |
| GB/T 7245-1987 |
Curved single coil spRing lock washers 鞍形弹簧垫圈 |
China National Standards Ring |
English PDF |
| GB/T 7244-1987 |
Single coil spRing lock washers，Heavy type 重型弹簧垫圈 |
China National Standards Ring |
English PDF |
| GB 6738-1986 |
Safety requirements for indicating and recording electrical measuRing instruments and their accessories 电测量指示和记录仪表及其附件的安全要求 |
China National Standards Ring |
English PDF |
| GB/T 6598-1986 |
Determination of weight-average molecular weight of polystyrene standards by low angle laser light scatteRing method 小角激光光散射法测定聚苯乙烯标准样品的重均分子量 |
China National Standards Ring |
English PDF |
| GB/T 6577-1986 |
Hydraulic fluid power--Cylinders--Piston seal housings incorporating beaRing rings--Dimensions and tolerances 液压缸活塞用带支承环密封沟槽型式、尺寸和公差 |
China National Standards Ring |
English PDF |
| GB/T 960-1986 |
Grip Rings 夹紧挡圈 |
China National Standards Ring |
English PDF |
| GB/T 959.3-1986 |
Specifications for Ring--Cutting rings 挡圈技术条件 切制挡圈 |
China National Standards Ring |
English PDF |
| GB/T 959.2-1986 |
Specifications for Ring--Round wire snap rings 挡圈技术条件 钢丝挡圈 |
China National Standards Ring |
English PDF |
| GB/T 959.1-1986 |
Specifications for Ring--Circlips 挡圈技术条件 弹性挡圈 |
China National Standards Ring |
English PDF |
| GB/T 896-1986 |
“E” Rings 开口挡圈 |
China National Standards Ring |
English PDF |
| GB/T 895.2-1986 |
Roundwire snap Rings for shaft 轴用钢丝挡圈 |
China National Standards Ring |
English PDF |
| GB/T 895.1-1986 |
Roundwire snap Rings for hole 孔用钢丝挡圈 |
China National Standards Ring |
English PDF |
| GB/T 892-1986 |
Lock Rings at the end of shaft with bolt 螺栓紧固轴端挡圈 |
China National Standards Ring |
English PDF |
| GB/T 891-1986 |
Lock Rings at the end of shaft with screw 螺钉紧固轴端挡圈 |
China National Standards Ring |
English PDF |
| GB/T 886-1986 |
Rings for shoulder 轴肩挡圈 |
China National Standards Ring |
English PDF |
| GB/T 885-1986 |
Lock Rings with screw and circlip 带锁圈的螺钉锁紧挡圈 |
China National Standards Ring |
English PDF |
| GB/T 884-1986 |
Lock Ring with screw 螺钉锁紧挡圈 |
China National Standards Ring |
English PDF |
| GB/T 883-1986 |
Lock Rings with cone pin 锥销锁紧挡圈 |
China National Standards Ring |
English PDF |
| GB/T 6541-1986 |
Petroleum products--Mineral oils--Determination of interfacial tension of oil against water--Ring method 石油产品油对水界面张力测定法 (圆环法) |
China National Standards Ring |
English PDF |
| GB/T 5443-1985 |
The test methods for the technical specifications of Ringing and tone for automatic telephone switchingnetwork 电话自动交换网铃流和信号音技术指标测试方法 |
China National Standards Ring |
English PDF |
| GB/T 5438-1985 |
Characteristics and measuRing methods for monophonic and stereophonic transmissions 单声和立体声节目传输特性和测量方法 |
China National Standards Ring |
English PDF |
| GB 6077-1985 |
Safety regulations for sheaRing machinery 剪切机械安全规程 |
China National Standards Ring |
English PDF |
| GB/T 4921-1985 |
Waste gasfrom manufactuRing process--Determination of chemical oxygendemand and nitrogenoxide--Potassium dichromate oxidation and naphthylethylene diamine colorimetric method 工业废气 耗氧值和氧化氮的测定 重铬酸钾氧化、萘乙二胺比色法 |
China National Standards Ring |
English PDF |
| GB/T 4919-1985 |
Waste water from manufactuRing process--Determination of total nitro compounds--Gas chromato-graphic method 工业废水 总硝基化合物的测定 气相色谱法 |
China National Standards Ring |
English PDF |
| GB/T 4312.2-1984 |
Technical parameters and measuRing methods for FM stereophonic broadcasting transmitters with supplementary channel 调频广播发射机技术参数和测量方法 立体声带附加信道 |
China National Standards Ring |
English PDF |
| GB/T 4312.1-1984 |
Technical parameters and measuRing methods for FM broadcasting transmitters--Monophonic and stereophonic 调频广播发射机技术参数和测量方法 单声和立体声 |
China National Standards Ring |
English PDF |
| GB/T 4197-1984 |
Method for measuRing the average grain size of sintered bar and rod of tungsten molybdenum and alloys 钨钼及其合金的烧结坯条、棒材晶粒度测试方法 |
China National Standards Ring |
English PDF |
| GB/T 4195-1984 |
Method for measuRing the distribution of the powder size of tungsten and molybdenum method by the balance for the fall of the particles 钨、钼粉末粒度分布测试方法(沉降天平法) |
China National Standards Ring |
English PDF |
| GB/T 4193-1984 |
Method for measuRing the density of the fine wire and ribbon of tungsten and molybdenum used in electric light sources and vacuumtubes 电真空器件及电光源用细钨丝、钼丝和薄带密度的测试方法 |
China National Standards Ring |
English PDF |
| GB/T 4072-1983 |
MeasuRing method of the phosphor excited by cathod rays 阴极射线致荧光粉测试方法 |
China National Standards Ring |
English PDF |
| GB/T 4071-1983 |
MeasuRing method for the phosphor excited by light 光致荧光粉测试方法 |
China National Standards Ring |
English PDF |
| GB/T 3895-1983 |
Graphical symbols for ships’ deck coveRing and insulation materials 船舶甲板敷料和绝缘材料图形符号 |
China National Standards Ring |
English PDF |
| GB/T 3660-1983 |
Unified weighting network for measuRing video continuous random noise 测量视频连续随机杂波用的统一加权网络 |
China National Standards Ring |
English PDF |
| GB 3380-1982 |
Ringing and tone for telephone automatic switching network 电话自动交换网铃流和信号音 |
China National Standards Ring |
English PDF |
| GB/T 3203-1982 |
Specification for carburizing steels of beaRings 渗碳轴承钢技术条件 |
China National Standards Ring |
English PDF |
| GB/T 2413-1980 |
Piezoelectric ceramic materials--MeasuRing methods for determination of volume density 压电陶瓷材料体积密度测量方法 |
China National Standards Ring |
English PDF |
| GB 2017-1980 |
CoveRing technique of the medium-wave broadcastingnetwork 中波广播网覆盖技术 |
China National Standards Ring |
English PDF |
| GB 2017-1980 |
CoveRing technique of the medium-wave broadcastingnetwork 中波广播网覆盖技术 |
China National Standards Ring |
English PDF |
| GB/T 1765-1979 |
Method of producing of paint films for testing heat and humidity resistance，salt-fog resistance and accelerated weatheRing 测定耐湿热、耐盐雾、耐侯性 (人工加速) 的漆膜制备法 |
China National Standards Ring |
English PDF |
| GB/T 305-2019 |
Rolling beaRings－Snap ring grooves and snap rings for radial bearings－Dimensions，geometrical product specifications (GPS) and tolerance values 滚动轴承 向心轴承止动槽和止动环 尺寸、产品几何技术规范（GPS）和公差值 |
China National Standards Ring |
English PDF |
| GB/T 7157-2019 |
Electric soldeRing irons and heating guns 电烙铁和热风枪 |
China National Standards Ring |
English PDF |
| Find out:3787Items | To Page of: First -Previous-Next -Last | [31] [32] [33] [34] [35] [36] [37] |
+86-755-25831330
