Cart:
 |
GB standards are the China national standards; Prefix code GB are Mandatory standards, GB/T are Recommended standards; All products or service must be compliance with GB standards; If you want to export products or services to huge Chinese market, need ensure they are meet the requirements of GB china national standards; We provide Chinese GB standards and English version GB standards Lookup, Translate, Download, Imported Commodity GB standards Testing and Compliance review services. |
| Standard Code | Standard Title | Standard Class | Order |
|---|---|---|---|
| GB/T 9069-2008 |
DeterminaTIon of sound power level for noise emitted by reciprocating pump - Engineering method 往复泵噪声声功率级的测定 工程法 |
China National Standards TI |
 English PDF |
| GB/T 22076-2008 |
PneumaTIc fluid power - Cylindrical quick-action couplings - Plug connecting dimensions, specifications, application guidelines and testing 气动圆柱形快换接头 插头连接尺寸、技术要求、应用指南和试验 |
China National Standards TI |
English PDF |
| GB/T 22070-2008 |
Aqua-ammonia absorpTIon refrigerating unit 氨水吸收式制冷机组 |
China National Standards TI |
English PDF |
| GB/T 22069-2008 |
Gas engine driven air-condiTIon( heat pump) unit 燃气发动机驱动空调(热泵)机组 |
China National Standards TI |
English PDF |
| GB/T 22068-2008 |
Automobile air condiTIoning electrically driven compressor assembly 汽车空调用电动压缩机总成 |
China National Standards TI |
English PDF |
| GB/T 18430.2-2008 |
Water chilling (heat pump) packages using the vapor compression cycle - Part 2：Water chilling (heat pump) packages for household and similar applicaTIon 蒸气压缩循环冷水(热泵)机组 第2部分: 户用及类似用途的冷水(热泵)机组 |
China National Standards TI |
English PDF |
| GB/T 13911-2008 |
DesignaTIon for metallic coating and chemical treatment 金属镀覆和化学处理标识方法 |
China National Standards TI |
English PDF |
| GB/T 13364-2008 |
Measurement of mechanical vibraTIon for reciprocating pump 往复泵机械振动测试方法 |
China National Standards TI |
English PDF |
| GB/T 22150-2008 |
RelaTIve timing of sound and vision for broadcasting 电视广播声音和图像的相对定时 |
China National Standards TI |
English PDF |
| GB 22128-2008 |
Technical specificaTIons for End-of-Life Vehicles recycling and dismantling enterprise 报废汽车回收拆解企业技术规范 |
China National Standards TI |
English PDF |
| GB/T 22126-2008 |
General specificaTIon for the logistics center operation 物流中心作业通用规范 |
China National Standards TI |
English PDF |
| GB/T 22125-2008 |
The operaTIon and management regulations for the enterprises of marketing automobile parts 汽车配件营销企业经营管理规范 |
China National Standards TI |
English PDF |
| GB/T 12406-2008 |
Codes for the representaTIon of currencies and funds 表示货币和资金的代码 |
China National Standards TI |
English PDF |
| GB/T 9326.5-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternaTIng voltages up to and including 500kV - Part 5: Pressure tanks 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第5部分: 压力供油箱 |
China National Standards TI |
English PDF |
| GB/T 9326.4-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternaTIng voltages up to and including 500kV - Part 4: Joint 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第4部分: 接头 |
China National Standards TI |
English PDF |
| GB/T 9326.3-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternaTIng voltages up to and including 500kV - Part 3: Sealing end 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第3部分: 终端 |
China National Standards TI |
English PDF |
| GB/T 9326.2-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternaTIng voltages up to and including 500kV - Part 2：Oil-filled paper insulated, lead-sheathed cables for alternating voltages up to and including 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第2部分: 交流500kV及以下纸绝缘铅套充油电缆 |
China National Standards TI |
English PDF |
| GB/T 9326.1-2008 |
Oil-filled, paper or polypropylene paper laminate insulated, metal-sheathed cables and accessories for alternaTIng voltages up to and including 500kV - Part 1: Test 交流500kV及以下纸或聚丙烯复合纸绝缘金属套充油电缆及附件 第1部分: 试验 |
China National Standards TI |
English PDF |
| GB/T 9966.8-2008 |
Test methods for natural facing stones - Part 8: Test method for structural performance of dimension stone cladding systems by uniform staTIc pressure difference 天然饰面石材试验方法 第8部分: 用均匀静态压差检测石材挂装系统结构强度试验方法 |
China National Standards TI |
English PDF |
| GB/T 9331-2008 |
Single and mulTIcore non-radial field power cables with extruded solid insulation for rated voltages 1kV and 3 kV 船舶电气装置 额定电压1kV和3kV挤包绝缘非径向电场单芯和多芯电力电缆 |
China National Standards TI |
English PDF |
| GB/T 9330.2-2008 |
PlasTIc insulated control cables - Part 2：Polyvinyl chloride insulated and sheathed control cables 塑料绝缘控制电缆 第2部分：聚氯乙烯绝缘和护套控制电缆 |
China National Standards TI |
English PDF |
| GB/T 9330.1-2008 |
PlasTIc insulated control cables - Part 1: General requirements 塑料绝缘控制电缆 第1部分：一般规定 |
China National Standards TI |
English PDF |
| GB/T 8411.2-2008 |
Ceramic and glass insulaTIng materials - Part 2: Methods of test 陶瓷和玻璃绝缘材料 第2部分：试验方法 |
China National Standards TI |
English PDF |
| GB/T 8287.2-2008 |
Indoor and outdoor post insulators for systems with nominal voltage greater than 1000 V - Part 2: Dimensions and characterisTIcs 标称电压高于1000V系统用户内和户外支柱绝缘子 第2部分：尺寸与特性 |
China National Standards TI |
English PDF |
| GB/T 7896-2008 |
Test method for opTIcal grade synthetic quartz crystal 人造光学石英晶体试验方法 |
China National Standards TI |
English PDF |
| GB/T 7895-2008 |
OpTIcal grade synthetic quartz crystal 人造光学石英晶体 |
China National Standards TI |
English PDF |
| GB/T 749-2008 |
Test method for determining capability of resisTIng sulfate corrode of cement 水泥抗硫酸盐侵蚀试验方法 |
China National Standards TI |
English PDF |
| GB/T 7345-2008 |
General requirements for electrical machine for automaTIc control system 控制电机基本技术要求 |
China National Standards TI |
English PDF |
| GB/T 7190.2-2008 |
Glass fiber reinforced plasTIc cooling tower - Part 2: Large glass fiber reinforced plastic cooling tower 玻璃纤维增强塑料冷却塔 第2部分: 大型玻璃纤维增强塑料冷却塔 |
China National Standards TI |
English PDF |
| GB/T 7190.1-2008 |
Glass fiber reinforced plasTIc cooling tower - Part 1: Middle and small glass fiber reinforced plastic cooling tower 玻璃纤维增强塑料冷却塔 第1部分: 中小型玻璃纤维增强塑料冷却塔 |
China National Standards TI |
English PDF |
| GB/T 7060-2008 |
General specificaTIons for rotary electrical machines in ships 船用旋转电机基本技术要求 |
China National Standards TI |
English PDF |
| GB/T 5258-2008 |
Fiber-reinforced plasTIc composites - Determination of compressive properties in the in-plane direction 纤维增强塑料面内压缩性能试验方法 |
China National Standards TI |
English PDF |
| GB/T 4654-2008 |
The general technical specificaTIons for non-metallic basic body infrared heater 非金属基体红外辐射加热器通用技术条件 |
China National Standards TI |
English PDF |
| GB/T 4109-2008 |
Insulated bushings for alternaTIng voltages above 1 000V 交流电压高于1000V的绝缘套管 |
China National Standards TI |
English PDF |
| GB/T 3365-2008 |
Carbon fiber reinforced plasTIcs - Determination of void content and fiber volume content 碳纤维增强塑料孔隙含量和纤维体积含量试验方法 |
China National Standards TI |
English PDF |
| GB/T 2900.26-2008 |
Electrotechnical terminology - Electrical machine for automaTIc control system 电工术语 控制电机 |
China National Standards TI |
English PDF |
| GB/T 2573-2008 |
Test method for aging properTIes of glass fiber reinforced plastics 玻璃纤维增强塑料老化性能试验方法 |
China National Standards TI |
English PDF |
| GB/T 2567-2008 |
Test methods for properTIes of resin casting boby 树脂浇铸体性能试验方法 |
China National Standards TI |
English PDF |
| GB/T 22083-2008 |
ClassificaTIon and requirements for building sealants 建筑密封胶分级和要求 |
China National Standards TI |
English PDF |
| GB/T 22079-2008 |
Polymeric insulators for indoor and outdoor use with a nominal voltage > 1 000 V - General definiTIons, test methods and acceptance criteria 标称电压高于1000V使用的户内和户外聚合物绝缘子 一般定义、试验方法和接收准则 |
China National Standards TI |
English PDF |
| GB/T 22078.3-2008 |
Power cables with cross-linked polyethylene insulaTIon and theiraccessories for rated voltage of 500kV(Um=550kV) - Part 3: Accessories for power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第3部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆附件 |
China National Standards TI |
English PDF |
| GB/T 22078.2-2008 |
Power cables with cross-linked polyethylene insulaTIon and their accessories for rated voltage of 500kV (Um=550kV) - Part2: Power cables with cross-linked polyethylene insulation for rated voltage of 500kV (Um=550kV) 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第2部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆 |
China National Standards TI |
English PDF |
| GB/T 22078.1-2008 |
Power cables with cross-linked polyethylene insulaTIon and their accessories for rated voltage of 500kV(Um=550kV) - Part 1: Power cable systems-cables with cross-linked polyethylene insulation and their accessories for rated voltage of 500kV (Um=550kV) - 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 第1部分: 额定电压500kV(Um=550kV)交联聚乙烯绝缘电力电缆及其附件 试验方法和要求 |
China National Standards TI |
English PDF |
| GB/T 22075-2008 |
HVDC converter staTIon audible noise 高压直流换流站可听噪声 |
China National Standards TI |
English PDF |
| GB/T 22073-2008 |
Thermal turbines for industrial applicaTIons (steam turbines, gas expansion turbines) - General requirements 工业用途热力涡轮机(汽轮机、气体膨胀涡轮机) 一般要求 |
China National Standards TI |
English PDF |
| GB/T 22072-2008 |
SpecificaTIons and technical requirements for dry-type amorphous alloy core distribution transformers 干式非晶合金铁心配电变压器技术参数和要求 |
China National Standards TI |
English PDF |
| GB/T 22071.2-2008 |
Test guide for instrument transformers - Part 2: InducTIve voltage transformers 互感器试验导则 第2部分: 电磁式电压互感器 |
China National Standards TI |
English PDF |
| GB/T 203-2008 |
Granulated blastfurnace slag used for cement producTIon 用于水泥中的粒化高炉矿渣 |
China National Standards TI |
English PDF |
| GB/T 17795-2008 |
Glass wool thermal insulaTIng products for building 建筑绝热用玻璃棉制品 |
China National Standards TI |
English PDF |
| GB/T 17794-2008 |
Preformed flexible elastomeric cellular thermal insulaTIon 柔性泡沫橡塑绝热制品 |
China National Standards TI |
English PDF |
| GB/T 17393-2008 |
SpecificaTIon for thermal insulation for use in contact with austenitic stainless steel 覆盖奥氏体不锈钢用绝热材料规范 |
China National Standards TI |
English PDF |
| GB/T 17371-2008 |
Silicate compound plaster for thermal insulaTIon 硅酸盐复合绝热涂料 |
China National Standards TI |
English PDF |
| GB/T 16911-2008 |
Code of dust control for cement producTIng 水泥生产防尘技术规程 |
China National Standards TI |
English PDF |
| GB/T 16779-2008 |
Test method for tension-tension faTIgue of fiber reinforced plastic laminates 纤维增强塑料层合板拉-拉疲劳性能试验方法 |
China National Standards TI |
English PDF |
| GB/T 16777-2008 |
Test methods for building waterproofing coaTIngs 建筑防水涂料试验方法 |
China National Standards TI |
English PDF |
| GB/T 18372-2008 |
Glass fibre fabric for ducTIng 玻璃纤维导风筒基布 |
China National Standards TI |
English PDF |
| GB/T 15928-2008 |
Reinforced plasTIcs based on unsaturated polyester resins - Determination of residual styrene monomer content 不饱和聚酯树脂基增强塑料中残留苯乙烯单体含量的测定 |
China National Standards TI |
English PDF |
| GB/T 15738-2008 |
Test method for resisTIvity of conducting and antistatic fiber reinforced plastics 导电和抗静电纤维增强塑料电阻率试验方法 |
China National Standards TI |
English PDF |
| GB/T 15613.3-2008 |
Model acceptance tests of hydraulic turbines, storage pumps and pump-turbine - Part 3: AddiTIonal performance test 水轮机、蓄能泵和水泵水轮机模型验收试验 第3部分：辅助性能试验 |
China National Standards TI |
English PDF |
| GB/T 15548-2008 |
General specificaTIon for three-phase synchronous generators driven by reciprocating internal combustion engine 往复式内燃机驱动的三相同步发电机通用技术条件 |
China National Standards TI |
English PDF |
| GB/T 15469.1-2008 |
Hydraulic turbines, storage pumps and pump-turbines cavitaTIon pitting evaluation - part 1: cavitation pitting evaluation in reaction turbines 水轮机、蓄能泵和水泵水轮机空蚀评定 第1部分：反击式水轮机的空蚀评定 |
China National Standards TI |
English PDF |
| GB/T 1458-2008 |
Test method for mechanical properTIes of ring of filament-winding reinforced plastics 纤维缠绕增强塑料环形试样力学性能试验方法 |
China National Standards TI |
English PDF |
| GB/T 14316-2008 |
PVC insulated ribbon cable with a pitch of 1,27 mm suitable for insulaTIon displacement termination 间距1.27mm绝缘刺破型端接式聚氯乙烯绝缘带状电缆 |
China National Standards TI |
English PDF |
| GB/T 14207-2008 |
Test method for water absorpTIon of sandwich constructions or cores 夹层结构或芯子吸水性试验方法 |
China National Standards TI |
English PDF |
| GB/T 13891-2008 |
Test methods of specular gloss for decoraTIve building materials 建筑饰面材料镜向光泽度测定方法 |
China National Standards TI |
English PDF |
| GB/T 13475-2008 |
Thermal insulaTIon - Determination of steady-state thermal transmission Properties - Calibrated and guard hot box 绝热 稳态传热性质的测定 标定和防护热箱法 |
China National Standards TI |
English PDF |
| GB/T 13350-2008 |
Glass wool and their products for thermal insulaTIon 绝热用玻璃棉及其制品 |
China National Standards TI |
English PDF |
| GB/T 13096-2008 |
Test method for mechanical properTIes of pultruded glass fiber reinforced plastic rods 拉挤玻璃纤维增强塑料杆力学性能试验方法 |
China National Standards TI |
English PDF |
| GB/T 12976.2-2008 |
Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 2: General and construcTIon requirements for power cables with rated voltages 35kV 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第2部分：额定电压35kV电缆一般规定和结构要求 |
China National Standards TI |
English PDF |
| GB/T 12976.1-2008 |
Paper-insulated power cables and their accessories with rated voltages up to and including 35kV - Part 1: General and construcTIon requirements for power cables with rated voltages up to and including 30kV 额定电压35kV(Um=40.5kV)及以下纸绝缘电力电缆及其附件 第1部分：额定电压30kV及以下电缆一般规定和结构要求 |
China National Standards TI |
English PDF |
| GB/T 12975-2008 |
General specificaTIon for synchronous generator in ship 船用同步发电机通用技术条件 |
China National Standards TI |
English PDF |
| GB/T 12972.3-2008 |
Flexible rubber-sheathed cables for mining purposes - Part 3：Trailing coalcutter cables with monitoring core and semiconducTIng screens for rated voltage of 0.66/1.14kV 矿用橡套软电缆 第3部分: 额定电压0.66/1.14kV 采煤机屏蔽监视加强型软电缆 |
China National Standards TI |
English PDF |
| GB/T 12971.2-2008 |
Trolley and contact wires for electric tracTIon - Part 2: Aluminium and steel composite trolley and contact wires 电力牵引用接触线 第2部分: 钢、铝复合接触线 |
China National Standards TI |
English PDF |
| GB/T 12971.1-2008 |
Trolley and contact wires for electric tracTIon - Part 1: Copper and copper-alloy contact wires 电力牵引用接触线 第1部分: 铜及铜合金接触线 |
China National Standards TI |
English PDF |
| GB/T 12954.1-2008 |
TesTIng methods for construction adhesives - Part 1: Test methods for ceramic tiles adhesives 建筑胶粘剂试验方法 第1部分: 陶瓷砖胶粘剂试验方法 |
China National Standards TI |
English PDF |
| GB/T 12666.3-2008 |
Test method on a single wire or cable under fire condiTIons - Part 3: Slanting specimen flame test 单根电线电缆燃烧试验方法 第3部分：倾斜燃烧试验 |
China National Standards TI |
English PDF |
| GB/T 12666.2-2008 |
Test method on a single wire or cable under fire condiTIons - Part 2: Horizontal specimen flame test 单根电线电缆燃烧试验方法 第2部分：水平燃烧试验 |
China National Standards TI |
English PDF |
| GB/T 12666.1-2008 |
Test method on a single wire or cable under fire condiTIons - Part 1: Vertical specimen flame test 单根电线电缆燃烧试验方法 第1部分：垂直燃烧试验 |
China National Standards TI |
English PDF |
| GB/T 11030-2008 |
CharacterisTIcs of rod ceramic insulators for a.c. contact system of electrified railways 交流电气化铁路接触网用棒形瓷绝缘子特性 |
China National Standards TI |
English PDF |
| GB/T 10969-2008 |
SpecificaTIon for water passage components of hydraulic turbines, storage pumps and pump-turbines 水轮机、蓄能泵和水泵水轮机通流部件技术条件 |
China National Standards TI |
English PDF |
| GB/T 1094.101-2008 |
Power transformers - Part 10.1: DeterminaTIon of sound levels - Application guide 电力变压器 第10.1部分: 声级测定 应用导则 |
China National Standards TI |
English PDF |
| GB/T 15576-2008 |
Low-voltage reacTIve power compensation assemblies 低压成套无功功率补偿装置 |
China National Standards TI |
English PDF |
| GB/T 10296-2008 |
Thermal insulaTIon - Determination of steady-state thermal transmission properties-pipe insulation apparatus 绝热层稳态传热性质的测定 圆管法 |
China National Standards TI |
English PDF |
| GB/T 10295-2008 |
Thermal insulaTIon-Determination of steady-state thermal resistance and related properties - Heat flow meter apparatus 绝热材料稳态热阻及有关特性的测定 热流计法 |
China National Standards TI |
English PDF |
| GB/T 10294-2008 |
Thermal insulaTIon - Determination of steady-state thermal resistance and related properties - Guarded hot plate apparatus 绝热材料稳态热阻及有关特性的测定 防护热板法 |
China National Standards TI |
English PDF |
| GB/T 9343-2008 |
Test method for flammability of plasTIcs - Determination of flash-ignition temperature and self-ignition temperature 塑料燃烧性能试验方法 闪燃温度和自燃温度的测定 |
China National Standards TI |
English PDF |
| GB/T 8331-2008 |
DeterminaTIon of bulk density of ion exchange resins in wet state 离子交换树脂湿视密度测定方法 |
China National Standards TI |
English PDF |
| GB/T 8330-2008 |
DeterminaTIon of specific gravity of ion exchange resins in wet state 离子交换树脂湿真密度测定方法 |
China National Standards TI |
English PDF |
| GB/T 8144-2008 |
DeterminaTIon of exchange capacity of cation exchange resin 阳离子交换树脂交换容量测定方法 |
China National Standards TI |
English PDF |
| GB/T 5757-2008 |
DeterminaTIon of moisture holding capacity of ion exchange resins 离子交换树脂含水量测定方法 |
China National Standards TI |
English PDF |
| GB/T 4610-2008 |
PlasTIcs - Determination of ignition temperature using a hot-air furnace 塑料 热空气炉法点着温度的测定 |
China National Standards TI |
English PDF |
| GB/T 22054-2008 |
Chemicals general method for determinaTIon of distillation characteristics of organic liquids(other than petroleum products) 有机液体（除石油产品）蒸馏特性测定通用方法 |
China National Standards TI |
English PDF |
| GB/T 22052-2008 |
Test method for vapor pressure - Temperature relaTIonship and initial decompostition temperature of liquids by isoteniscope 用液体蒸气压力计测定液体的蒸气压力 温度关系和初始分解温度的方法 |
China National Standards TI |
English PDF |
| GB/T 1631-2008 |
DesignaTIon system and basis for specifications of ion exchange resins 离子交换树脂命名系统和基本规范 |
China National Standards TI |
English PDF |
| GB/T 13659-2008 |
001×7 Strong acid polystyrene caTIon exchange resin 001×7 强酸性苯乙烯系阳离子交换树脂 |
China National Standards TI |
English PDF |
| GB/T 11991-2008 |
DeterminaTIon of reversible swelling of exchange resins 离子交换树脂转型膨胀率测定方法 |
China National Standards TI |
English PDF |
| GB/Z 22135-2008 |
Milestones and acTIvities during commissioning of electrical instrumentation and control systems in the process industry 过程工业中电子设备和控制系统在调试中的标记和活动 |
China National Standards TI |
English PDF |
| GB/Z 21193.2-2008 |
Fossil-fired steam power staTIons - Part 2: Drum-level control 矿物燃烧蒸汽发电站 第2部分：汽包水位控制 |
China National Standards TI |
English PDF |
| GB/T 8355-2008 |
General specificaTIons for marine electrical measurement and control instruments 船舶用电动测量和控制仪表 通用技术条件 |
China National Standards TI |
English PDF |
| GB/T 777-2008 |
Analogue pneumaTIc signal for industrial-process measurement and control instruments 工业自动化仪表用模拟气动信号 |
China National Standards TI |
English PDF |
| Find out:39883Items | To Page of: First -Previous-Next -Last | [289] [290] [291] [292] [293] [294] [295] |
+86-755-25831330
